MCZ33904B5EK - Freescale Semiconductor

Overview

The MC33903/4/5 is the second generation

family of System Basis Chips, which combin e

several features and enhance present module

designs. The device works as an advanced

power management unit for the MCU and

additional integrated circuits such as sensors

and CAN transceivers. It has a built-in enhanced

high speed CAN interface (ISO11898-2 and -5),

with local and bus failure diagnostics, protection,

and fail safe operation mode. The SBC may

include one or two LIN 2.1/J2602-2 interfaces

with LIN master terminal outputs. It includes

wake-up input pins than can also be configured

as output drivers for flexibility.

This device implements multiple Low Power

modes with very low-current consumption. In

addition, the device is part of a family concept

where pin compatibility, among the various

devices with and without LIN interfaces, adds

versatility to module design.

The MC33903/4/5 also implements an

innovative and advanced fail-safe state machine

and concept solution. This family of devices are

supported by an enablement ecosystem that

includes an evaluation board, software interface,

EMC/ESD conformance reports and training

material that allows a faster time to market and

eases your designs.

Flexible (I/O)

MCU Voltage Regulator (VDD)

Ballast Regulator (VAUX)

Power Sharing (VDD BALLAST)

Internal CAN Regulator (VCAN)

Low Power Modes

Secured State Machine

CAN High Speed

LIN 1

SPI Adv W/D

LIN 2

33903D

33904

33905S

33905D

33903

Legend

MC33903/4/5 Block Diagram

33903S

Analog, Mixed-Signal and Power Management

MC33903/4/5

System Basis Chip Gen2 with High Speed CAN and

LIN Interface

IDEAL COMPANION CHIP FOR MCU IN BODY, SAFETY, AND POWERTRAIN APPLICATIONS

Segment Applications Proposed FSL MCU

Body Body Controller S12x, MPC560x

Gateway

Seat Module

S12x, MPC560x, S08x

Door Module

Lighting Control Module

Column Module

HVAC

Cluster

Safety & Chassis Seat Belt Pre-tensioner S12x, MPC560x

Electric Parking Brake

Steering

Power Train Fuel Pump S12x, S08x

Water Pump

Glow Plug

Engine Management Low End S12x, MPC563x

Key Characteristics

Parameter Characterization

MCU Linear VREG (LDO) 5.0 / 3.3 V

Output Current (300 mA for 33903D/S, 33904, 33905D/S with optional external PNP implementation)

Bus Output CAN

33903D/S, 33905D/S only LIN

Data Rate

CAN 40 kB/s – 1.0 MB/s

LIN 10.4 kB/s – 20 kB/s (100 kB/s in fast mode)

Low Power VDD OFF/ VDD ON Current 15/25 µA

ESD - Module Level (CAN and LIN) ±8000 V

Operating Voltage 5.5 - 28 V

Maximum Input Voltage 27 VDC, 40 V (Load Dump)

Operating Temperature -40 °C<TA<125 °C

Energy Sav ings

• Ultra low power modes (typ 15 µA with

VDD off)

• Innovative Wake-up management and

cyclic sense capability

Robust Physical Layers

• Certification to LIN 2.1, J2602-2, and

ISO11898-2-5 standards

• Successfully certified for stringent EMC,

ISO, and ESD standards

Easy to Use

• Ecosystem to lower development time and

simplify access

• Debug mode to save time during

application development

Flexibility & Compatibilit y:

• Selectable parameters (RST time, W/D

type, VDD under-voltage threshold, VAUX

3.3 or 5.0 V)

• 1 or 2 LIN options (33903S, 33905S and

33903D, 33905D)

• Scalable (I/O pins configurable as wake-up

inputs or output LIN master terminations)

Power Management Scalability

• MCU power supply (VDD): 5.0 or 3.3 V /

150 mA (power split option for scalable

needs - up to 300 mA)

• 5.0 or 3.3 V voltage regulator (VAUX) for

auxiliary loads

• Dedicated 5.0 V voltage regulator (5 V

CAN) for High Speed CAN

Functional Safety

• Innovative cranking pulse manage ment

during VDD low

• Fail safe & configurable state machine

• Enhanced protections and diagnostics

Freescale Part Number VDD output

voltage CAN

interface LIN

interface(s) I/O Wake-up Capability VAUX VSENSE MUX Package

MC33905D (Dual LIN)

MCZ33905BD3EK/R2 3.3 V

2 wake-up + 2 LIN terms

3 wake-up + 1 LIN terms

4 wake-up + no LIN terms

Yes Yes Yes SOIC 54 pins

exposed pad

MCZ33905CD3EK/R2

MCZ33905D5EK/R2

5.0 V

MCZ33905BD5EK/R2

MCZ33905CD5EK/R2

MC33905S (Single LIN)

MCZ33905BS3EK/R2 3.3 V

3 Wake-up + 1 LIN terms

4 Wake-up + no LIN terms Yes Yes Yes SOIC 32 pin

exposed pad

MCZ33905CS3EK/R2

MCZ33905S5EK/R2

5.0 V

MCZ33905BS5EK/R2

MCZ33905CS5EK/R2

MC33905D Simplified Application Drawing

Features

• LDO Linear Power Supply 5.0 or 3.3 V, up to 300 mA with an optional external ballast

transistor

• LDO Auxiliary Regulator with ballast transistor (5.0 / 3.3 V configurable)

• Under-voltage management for cranking

• Internal 5.0 V regulator for CAN driver supply

• Low current consumption in sleep mode

• Fail safe state machine linked with SAFE pin

• Secured SPI with Watchdog capability

• High precision VSUP sense monitoring

• Multiple Analog sensing to 1 MUX output

• Dual configurable I/O with W/U feature

• “B” versions are recommended for ne w designs. Changes implemented on “B”

versions: resolved VSUP slow ramp up behavior, enhanced device current

consumption, and improved oscillator

• CAN, ISO11898-2 and 11898-5 compliant

• 2 LIN transceivers - 2.0, 2.1, and SAE J2602-2 compliant

LIN-TERM2

LIN-2 RXD-L2

TXD-L2

LIN Interface - #2

SCLK

MOSI

INT

5V-CAN

VSUP1

I/O-1

MISO

GND SPI

RST

VDD Regulator

DBG

5V-CAN

Configurable

VDD

Analog Monitoring

VBAUX

5 V Auxiliary

SAFE

Signals Condition & Analog MUX

Input-Output

VSENSE

Regulator

VS2-INT

Oscillator

Regulator

State Machine

Fail-safe

Power Management

VSUP2

VS2-INT

VAUXVCAUX

MUX-OUT

I/O-0

LIN-TERM1

LIN-1 RXD-L1

TXD-L1

LIN Interface - #1

RXD

TXD

Enhanced High-speed CAN

Physical Interface

CANL

CANH

SPLIT

VS2-INT

(5.0 V/3.3 V)

BAT

CAN Bus

LIN Bus

MC33905S Simplified Application Drawing

Features

• LDO Linear Power Supply 5.0 or 3.3 V, up to 300 mA with an optional external ballast

transistor

• LDO Auxiliary Regulator with ballast transistor (5.0 / 3.3 V configurable)

• Under voltage management for cranking

• Internal 5.0 V re gulator for CAN driver supply

• Low current consumption in sleep mode

• Fail safe state machine linked with SAFE pin

• Secured SPI with Watchdog capability

• High precision VSUP sense monitoring

• Multiple Analog sensing to 1 MUX output

• Triple configurable I/O with W/U feature

• “B” versions are recommended for new designs. Changes implemented on “B”

versions: resolved VSUP slow ramp up behavior, enhanced device current

consumption, and improved oscillator

• CAN, ISO11898-2 and 11898-5 compliant

• 1 LIN transceiver - 2.0, 2.1, and SAE J2602-2 compliant

(5.0 V/3.3 V)

BAT

Q2 Q1

I/O-3

LIN Term

SCLK

MOSI

INT

5V-CAN

VSUP1

I/O-1

MISO

GND SPI

RST

VDD Regulator

DBG

5V-CAN

Configurable

VDD

Analog Monitoring

VBAUX

5V Auxiliary

SAFE

Signals Conditio n & Analog MUX

Input-Output

VSENSE

Regulator

VS2-INT

Oscillator

Regulator

State Machine

Fail-safe

Power Management

VSUP2 VS2-INT

VAUX

VCAUX

MUX-OUT

I/O-0

LIN-T

LIN RXD-L

TXD-L

LIN Interface

RXD

TXD

Enhanced High-speed CAN

Physical Interface

CANL

CANH

SPLIT

VS2-INT

BAT

CAN Bus

LIN Bus

MC33904 Simplified Application Drawing Features

• LDO Linear Power Supply 5.0 or 3.3 V, up to 300 mA with an optional external ballast

transistor

• LDO Auxiliary Regulator with ballast transistor (5.0 / 3.3 V configurable)

• Under-voltage management for cranking

• Internal 5.0 V regulator for CAN driver supply

• Low current consumption in sleep mode

• Fail safe state machine linked with SAFE pin

• Secured SPI with Watchdog capability

• High precision VSUP sense monitoring

• Multiple Analog sensing to 1 MUX output

• Quad configurable I/O with W/U feature

• “B” versions are recommended for new designs. Changes implemented on “B”

versions: resolved VSUP slow ramp up behavior, enhanced device current

consumption, and improved oscillator

• CAN transceiver: ISO11898-2 and 11898-5 compliant

SCLK

MOSI

INT

5V-CAN

VSUP1

MISO

GND SPI

RST

VDD Regulator

DBG

5V-CAN

Configurable

VDD

Analog Monitoring

VBAUX

5 V Auxiliary

SAFE

Signals Condition & Analog MUX

Input-Output

VSENSE

Regulator

VS2-INT

Oscillator

Regulator

State Machine

Fail Safe

Power Management

VSUP2

VS2-INT

VAUX

VCAUX

MUX-OUT

RXD

TxD

Enhanced High Speed CAN

Physical Interface

CANL

CANH

SPLIT

I/O-1

I/O-2

I/O-3

I/O-0

(5.0 V/3.3 V)

BAT

CAN Bus

Freescale Part Number VDD output

voltage CAN

interface LIN

interface(s) I/O Wake-up Capability VAUX VSENSE MUX Package

MC33904

MCZ33904B3EK/R2 3.3 V

1 0 4 Wake-up Yes Yes Yes SOIC 32 pins

exposed pad

MCZ33904C3EK/R2

MCZ33904A5EK/R2

5.0 V

MCZ33904B5EK/R2

MCZ33904C5EK/R2

MC33903 Simplified Application Drawing Features

• LDO Linear Power Supply 5.0 or 3.3 V

•V

DD does not allow usage of an external PNP on the 33903. Output current limited to

150 mA

• Under-voltage management for cranking

• Internal 5.0 V regulator for CAN driver supply

• Low current consumption in sleep mode

• Fail safe state machine linked with SAFE pin

• Secured SPI with Watchdog capability

• Configurable I/O with W/U feature

• “B” versions are recommended for new designs. Changes implemented on “B”

versions: resolved VSUP slow ramp up behavior, enhanced device current

consumption, and improved oscillator

• CAN transceiver: ISO11898-2 and 11898-5 compliant

SCLK

MOSI

INT

5V-CAN

VSUP2

MISO

GND

SPI

RST

VDD Regulator

DBG

5V-CAN

Configurable

VDD

Input-Output Regulator

VS-INT

Oscillator

State Machine

Power Management

VS-INT

I/O-0

RXD

TxD

Enhanced High Speed CAN

Physical Interface

CANL

CANH

SPLIT

SAFE

VSUP1

Freescale Part Number VDD output

voltage CAN

interface LIN

interface(s) I/O Wake-up Capability VAUX VSENSE MUX Package

MC33903

MCZ33903B3EK/R2 3.3 V

101 Wake-up NoNoNo

SOIC 32 pins

exposed pad

MCZ33903C3EK/R2

MCZ33903B5EK/R2 5.0 V

MCZ33903C5EK/R2

Freescale Part Number VDD output

voltage CAN

interface LIN

interface(s) I/O Wake-up Capability VAUX VSENSE MUX Package

MC33903D (Dual LIN)

MCZ33903BD3EK/R2 3.3 V

1 wake-up + 2 LIN terms

2 wake-up + 1 LIN terms

3 wake-up + no LIN terms

No Yes Yes SOIC 32 pins

exposed pad

MCZ33903CD3EK/R2

MCZ33903BD5EK/R2 5.0 V

MCZ33903CD5EK/R2

MC33903D Simplified Application Drawing Features

• LDO Linear Power Supply 5.0 or 3.3 V, up to 300 mA with an optional

external ballast transistor

• Under-voltage management for cranking

• Internal 5.0 V regulator for CAN driver supply

• Low current consumption in sleep mode

• Fail safe state machine linked with SAFE pin

• Secured SPI with Watchdog capability

• High precision VSUP sense monitoring

• Multiple Analog sensing to 1 MUX output

• Configurable I/O with W/U feature

• “B” versions are recommended for new designs. Changes implemented on

“B” versions: resolved VSUP slow ramp up behavior, enhanced device

current consumption, and improved oscillator

• CAN, ISO11898-2 and 11898-5 compliant

• 2 LIN transceivers - 2.0, 2.1, and SAE J2602-2 compliant

LIN-T2

LIN-2 RXD-L2

TXD-L2

LIN 2.1 Interface - #2

SCLK

MOSI

INT

5V-CAN

VSUP

MISO

GND

SPI

RST

Regulator

DBG

5V-CAN

Configurable

VDD

Analog Monitoring

SAFE

Signals Condition & Analog MUX

Input-Output

VSENSE

Regulator

S2-INT

Oscillator

State Machine

Fail-safe

Power Management

S2-INT

MUX-OUT

IO-0

LIN-T1

LIN-1 RXD-L1

TXD-L1

LIN 2.1 Interface - #1

RXD

TXD

Enhanced High-speed CAN

Physical Interface

CANL

CANH

SPLIT

S2-INT

MC33903S Simplified Application Drawing Features

• LDO Linear Power Supply 5.0 or 3.3 V, up to 300 mA with an optional

external ballast transistor

• Under-voltage management for cranking

• Internal 5.0 V regulator for CAN driver supply

• Low current consumption in sleep mode

• Fail safe state machine linked with SAFE pin

• Secured SPI with Watchdog capability

• High precision VSUP sense monitoring

• Multiple Analog sensing to 1 MUX output

• Configurable I/O with W/U feature

• “B” versions are recommended for new designs. Changes implemented on

“B” versions: resolved VSUP slow ramp up behavior, enhanced device

current consumption, and improved oscillator

• CAN, ISO11898-2 and 11898-5 compliant

• 1 LIN transceiver - 2.0, 2.1, and SAE J2602-2 compliant

I/O-3

LIN Term #1

SCLK

MOSI

INT

5V-CAN

VSUP

MISO

GND

SPI

RST

Regulator

DBG

5V-CAN

Configurable

VDD

Analog Monitoring

SAFE

Signals Condition & Analog MUX

Input-Output

VSENSE

Regulator

S-INT

Oscillator

State Machine

Fail Safe

Power Management

MUX-OUT

I/O-0

LIN-T

LIN RXD-L

TXD-L

LIN 2.1 Interface - #1

RXD

TXD

Enhanced High Speed CAN

Physical Interface

CANL

CANH

SPLIT

S-INT

Freescale Part Number VDD output

voltage CAN

interface LIN

interface(s) I/O Wake-up Capability VAUX VSENSE MUX Package

MC33903S (Single LIN)

MCZ33903BS3EK/R2 B3.3 V

12 Wake-up + 1 LIN terms

3 Wake-up + no LIN terms

SOIC

32 pin

expose

d pad

No Yes Yes

MCZ33903CS3EK/R2 C

MCZ33903BS5EK/R2 B5.0 V

MCZ33903CS5EK/R2 C

MC33903P

MCZ33903CP5EK/R2

5.0 V

03 Wake-up

SOIC

32 pin

expose

d pad

No Yes Yes

MCZ33903CP3EK/R2 3.3 V

MC33903, MC33904, AND MC33905 KEY FEATURES AND BENEFITS

Features Benefits

Ecosystem

Easy-to-Use Ecosystem • Faster time to market.

• EVB + SW interface to ease SBC usage & programming.

• Electrical and EMC/ESD conformance reports.

• Training material.

Energy Management

Ultra Low Power Modes • Best-in-class quiescent current down to 15 µA including LIN and

CAN wake-up active.

• Reduces contribution of active blocks during stand-by mode.

Innovative Wake-up Event • Save time during cyclic check by reducing the number of state

machine transitions. This contributes in reducing overall ECU

energy consumption (Energy = Current x Time).

Scalable Power Supply • Enables platform solution (150 mA internal supply, or up to

300 mA with an optional ballast transistor).

System Management

Flexible Fail Safe Modes • Flexibility to address th e ECU functional safety assessment and

program the default fail safe behavior via hardware

implementation.

Secured SPI • Fast SPI access – higher frequency combine d with new register

addressing methodology to save time.

• Parity checks.

Innovative Cranking Pulse

Management • System alternative to save customer cost (PCB space, cost of

capacitor) while keeping some degraded functionalities during

cranking mode.

Advanced Watchdog • Improved, safer and optional Watchdog (in addition to time-out

and window watchdog) implemente d to avoid unpredictable

Watchdog recognition, so that closed loop MCU activity can be

detected.

Ease Customer Debug Mode • The DBG pin is used to inhibit the watchdog during debug mode .

This helps hardware and software designers save time during

application development.

Robust Physical Layers

Certification and Car OEM

Approval Process • LIN and CAN HS P/L meets conformance tests and EMC/ESD

standard requirements to secure the customer design

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.

All other product or service names are the property of their respective owners.

Document Number: MC33903_4_5FS, Rev. 6.0

Learn More: For current information ab out Freescale products,

please visit www.freescale.com.

Questions

• Are you looking for an automotive certified

High Speed CAN and LIN Physical Layer

integrated on a single chip SBC?

• What is the maximum current capability of

your MCU?

• Do you need to implement very low

application quiescent current?

• How many wake-up sources are required

by your system?

• Do you need to monitor bus failures during

network communications?

• What battery voltage range is required by

your system? What is the application

behavior expected during cranking pulse?

• Do you need continuous system

monitoring (temperature, battery voltage,

inputs signals,...)?

• What are the safe ty level requirements of

your application? Do you need external

components to monitor your MCU

(watchdog,...)?

• How many regulator outputs, and what

logic voltage levels are required by your

system (3.3 or 5.0 V)?

Development Tools

Part Number Description

KIT33903BD3EVBE Evaluation board to demonstrate the key features of the MC33903

KIT33903BD5EVBE Evaluation board to demonstrate the key features of the MC33903

KIT33905BD3EVBE Evaluation board to demonstrate the key features of the MC33903/4/5

KIT33905D5EKEVBE Evaluation board to demonstrate the key features of the MC33903/4/5

Documentation

Document Number Title Description

MC33903_4_5 Data Sheet Presents the specifications for the product

SG1002 Selector Guide Analog and power management device comparison

SG187 Selector Guide Automotive device comparison

EK SUFFIX (PB-FREE)

32-PIN SOICW-EP

98ASA10556D

EK SUFFIX (PB-FREE)

54-PIN SOICW-EP

98ASA10506D

Freescale Semiconduct or is a leading provider

for over 25 years of high-performance products

using SMARTMOS technology that combines

digital, power and standard analog functions.

The company supplie s analog and power

management ICs for the automotiv e, consumer,

networking and industrial markets. Freescale’s

analog and power ICs complement our broad

portfolio of micro controllers, microprocessors,

ZigBee® technology, digital signal processors,

sensors, with develo pment t ool s and supp ort t o

provide system solutions to customers.