Hamlin USA Tel: +1 920 648 3000 •Fax: +1 920 648 3001 •Email: sales.us@hamlin.com
Hamlin UK Tel: +44 (0)1379 649700 •Fax: +44 (0)1379 649702 •Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6142 923920 •Fax: +49 (0) 6142 923921 •Email: sales.de@hamlin.com
Hamectrol France Tel: +33(0) 1 6047 3000 •Fax: +33(0) 1 6015 9136 •Email: sales.fr@hamlin.com
Issue No: AF Date: 05.02.09 DCR B6092
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION
PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the
product is put. Upon request, HAMLIN will assist purchasers by providing information specific
to any particular application. HAMLIN disclaims any and all liability whatsoever for any
purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
Hall Type Digital Switch
3 Wire ( Voltage Output)
Supply Maximum Vdc -25 to +25.2
Voltage Operation Vdc 4.75 to 25.2
(Note 1) Overvoltage Protection Vdc-max 27
Output High Voltage Vdc-min VDD - 2 (sinking outputs with internal pull-up resistor)
Output Low Voltage Vdc-max 0.6 @ 20mA
Output Current (continuously on) mA-max 20
mA-min 1
mA-max 10.5
Switching Speed kHz-max 15
Temperature Operating OC -40 to +85
Storage OC -65 to +85
Note 1 - As long as Tj (Junction Temperature) is not exceeded
TABLE 1
Cable Length Options:-
(Cable Type 24 AWG
7/32 PVC 105oC,
Double Insulated)
SELECT CABLE
OPTION LENGTH
(in) mm
01 (3.94) 100
02 (11.81) 300
03 (19.69) 500
04 (29.53) 750
05 (39.37) 1000
TABLE 2
Termination Options:-
SELECT DESCRIPTION
OPTION
A Tinned leads
B Crimped terminals
C 6.35mm fastons
D AMP MTE 2.54mm pitch
E JST XHP 2.5mm pitch
55075 Geartooth Hall Effect Sensor Features and Benefits
Features
•Rotary position geartooth sensor
•Stainless steel M12 threaded barrel
•Electronic protection against severe and
automotive environments
•Self adjusting magnetic range
•3 wire (voltage output)
•EMC protection (consult Hamlin)
•Short circuit/reverse voltage protection
•Zero speed detection
Benefits
•Long life; up to 20 billion operations
•High speed operation
•No chopper delay
•Unaffected by harsh environments
•Rotary orientation not critical
•On-chip 10 bit A/D converter
•Customer selection of cable length and
connector type
Applications
•Geartooth sensor
•Camshaft sensor
•Linear encoder
•Rotary encoder
DIMENSIONS (in) mm BLOCK DIAGRAM
SPECIFICATIONS
APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination
ORDERING INFORMATION
www.hamlin.com
Typical Output
(.059") 1.5mm Typical
Table 2
Table 1
Series 55075
Cable Length
Termination
55075 00 XX X
Current Consumption
