MMBD914-V-GS08 - VISHAY SEMICONDUCTOR

MMBD914-V

www.vishay.com Vishay Semiconductors

Rev. 1.4, 28-Jan-13 1Document Number: 85734

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Small Signal Switching Diode

MECHANICAL DATA

Case: SOT-23

Weight: approx. 8.8 mg

Packaging codes/options:

GS18/10K per 13" reel (8 mm tape), 10K/box

GS08/3K per 7" reel (8 mm tape), 15K/box

FEATURES

• Silicon epitaxial planar diode

• Fast switching diode in case SOT-23, especially

suited for automatic insertion.

• AEC-Q101 qualified

• Material categorization:

For definitions of compliance please see

www.vishay.com/doc?99912

PARTS TABLE

PART ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS

MMBD914-V MMBD914-V-GS18 or MMBD914-V-GS08 5D Single diode Tape and reel

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Peak reverse voltage VRM 100 V

Maximum average forward rectified current IF(AV) 200 mA

Maximum power dissipation Tamb = 25 °C Ptot 225 mW

THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Maximum junction temperature Tj150 °C

Storage temperature range Tstg - 55 to + 150 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Forward voltage drop IF = 10 mA VF1V

Reverse current VR = 20 V IR25 nA

VR = 75 V IR5μA

Reverse recovery time IF = 10 mA to iR = 1 mA,

VR = 6 V, RL = 100 trr 4ns

Diode capacitance VR = 0 V, f = 1 MHz CD4pF

MMBD914-V

www.vishay.com Vishay Semiconductors

Rev. 1.4, 28-Jan-13 2Document Number: 85734

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters (inches): SOT-23

Foot print recommendation:

Rev. 8 - Date: 23.Sept.2009

17418

Document no.: 6.541-5014.01-4

0.9 (0.035)

1 (0.039)

0.9 (0.035)

1 (0.039)

1.43 (0.056)

0.45 (0.018)

0.35 (0.014)

2.8 (0.110)

3.1 (0.122)

0.45 (0.018)

0.35 (0.014)

0.45 (0.018)

0.35 (0.014)

0.1 (0.004) max.

2.35 (0.093)

2.6 (0.102)

0.175 (0.007)

0.098 (0.004)

1.15 (0.045)

0.9 (0.035)

1.20 (0.047)

0.95 (0.037) 0.95 (0.037)

2 (0.079)

0.7 (0.028)

0.9 (0.035)

0° to 8°

0.2 (0.008)

0.3 (0.012)

0.5 (0.020)

0.550 ref. (0.022 ref.)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.