All specifications are subject to change without notice. YNWMAX153 Rev 05 03/04/11
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com
3.3V CMOS 153.6MHz WiMAX VCXO YNWMAX153
Application Specic Voltage Controlled
Crystal Oscillator 7.0 x 5.0mm
ASSP VCXO
Package:
Pin Functions:
Pin Function
1 Voltage Control
2 Enable/Disable
3 Ground
4 Output
5 N/C
6 VDD
Recommended Land Pattern:
Part Ordering Information:
YNWMAX153
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
7.0 x 5.0mm Ceramic SMD ASSP VCXO™ for WiMAX
Product Features
•Very low Pk to Pk jitter - 40ps Max
•Low supply current - 30mA Max
•Low power standby mode
•RoHS Compliant
Product Description
This is an enhanced 3.3V, 153.6MHz
with superb jitter and low operating current
for providing clock references in telecom
applications.
Applications
•E1
• CEPT1(x8)
•Modems
1
11-0008
All specifications are subject to change without notice. YNWMAX153 Rev 05 03/04/11
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com
3.3V CMOS 153.6 MHz WiMAX VCXO
Application Specic Voltage Controlled
Crystal Oscillator 7.0 x 5.0mm
YNWMAX153
ASSP VCXO
Electrical Performance
Parameter Min. Typ. Max. Units Notes
Output Frequency 153.6 MHz
Supply Voltage VDD 3.135 3.3 3.465 V
Supply Current, Output Enabled 30 mA
Frequency Stability ±35 ppm See Note 1 below
Operating Temperature Range -40 +85 °C
Output Logic 0, VOL 10% VDD V
Output Logic 1, VOH 90% VDD V
Output Load 15 pF
Duty Cycle 45 55 % Measured 50% VDD
Rise and Fall Time 5 ns Measured 20/80% of waveform
Jitter, Phase 1 ps, RMS(1-s) 12kHz~20 MHz Frequency Band
Jitter, Peak to Peak 40 ps, Pk-Pk 100.000 Random Periods
Phase Noise -65 -50 dBc/Hz At 10Hz offset
Phase Noise -90 -85 dBc/Hz At 100Hz offset
Phase Noise -120 -115 dBc/Hz At 1kHz offset
Phase Noise -135 -130 dBc/Hz At 10kHz offset
2
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (10 years at +40°C average effective ambient temperature), shock and vibration.
2. Forspecicationsotherthanthoselisted,pleasecontactsales.
Absolute Maximum Ratings
Parameter Min. Typ. Max. Units Notes
Storage Temperature -55 +125 °C
For the latest product information visit: http://www.pericom.com/products/timing/oscillators/YNWMAX153/
For test circuit go to: http://www.pericom.com/pdf/sre/tc_vc6cmos.pdf
For soldering reow prole and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf
Voltage Control Function
Parameter Min. Typ. Max. Units Notes
Pullability ±75 ±110 ppm
Control Voltage Range 0.3 3.0 V As rated
Center Control Voltage 1.65 V For RMT Nominal Frequency
Monotonic Linearity 10 % Positive Transfer Slope
Input Impedance 130 kΩ Control Voltage Pin
Output Enable / Disable Function
Parameter Min. Typ. Max. Units Notes
Input Voltage (pin 2), Output Enable 3.0 V or open
Input Voltage (pin 2), Output Disable (low power standby) 0.3 V Output is Hi-Z
11-0008
