https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AxiolineF, Bus coupler, Sercos, RJ45 jack, transmission speed in the local bus:100 Mbps, degree of protection:IP20, including bus base module and AxiolineF connector Product Description (R) The bus coupler is intended for use within a third-generation Sercos network. It is the link to the AxiolineF I/O system. Up to 63 AxiolineF devices can be connected to the bus coupler. A corresponding SDDML file is available for integrating the AxiolineF station into the programming system. It can be downloaded at: phoenixcontact.net/product/2701686 Your advantages 2 RJ45 connections Rotary encoding switch Supports Sercos V1.3 FSP-IO (Function Specific Profile-IO) for modular I/O devices 8 connections Firmware can be updated Typical cycle time of the AxiolineF local bus is around 10s Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356790109 Weight per Piece (excluding packing) 220.000 g Custom tariff number 85389091 Country of origin Germany 01/18/2021Page1/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Technical data Dimensions Width 45 mm Height 126.1 mm Depth 74 mm Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to EN60715). Ambient conditions Ambient temperature (operation) -25 C ... 60 C (Mounting position: wall mounting on horizontal DIN rail) -25 C ... 55 C (Mounting position: any) Ambient temperature (storage/transport) -40 C ... 85 C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level) Degree of protection IP20 Connection data Designation AxiolineF connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the "AxiolineF: system and installation" user manual. Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 1.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 1.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Color traffic grey A RAL 7042 Net weight 177 g Note on weight specifications with connector and bus base module Mounting position any (observe temperature derating) Interfaces Designation Sercos Number 2 01/18/2021Page2/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Technical data Interfaces Connection method RJ45 jack Note on the connection method Auto negotiation and autocrossing Transmission speed 100 Mbps (full duplex) Transmission physics Ethernet in RJ45 twisted pair Designation AxiolineFlocal bus Connection method Bus base module Transmission speed 100 Mbps Designation Service Number 1 Connection method Micro USB type B Network/bus system Number of supported devices max. 63 (per station) Number of local bus devices that can be connected max. 63 Designation Sercos Equipment type Sercos slave Device profile FSP_IO System-specific protocols Sercos protocols Sercos Specification Sercos specification 1.31 Protocol Sercos TFTP Axioline potentials Designation Communications power UL feed-in (the supply of the AxiolineF local bus UBus is generated from UL) Supply voltage 24 VDC Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current consumption max. 570 mA (with 2A at UBus for the I/Os and UL = 24 V) Power consumption max. 13.7 W (2.0A on UBus, UL=24V) Type of protection Surge protection Reverse polarity protection Designation AxiolineF local bus supply (UBus) Supply voltage 5 VDC (via bus base module) Power supply unit 2A Standards and Regulations Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN61000-4-2/IEC61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge 01/18/2021Page3/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Technical data Standards and Regulations Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN61000-4-3/IEC61000-4-3 Criterion A, Field intensity: 10 V/m Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN61000-4-4/IEC61000-4-4 Criterion B, 2kV Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN61000-4-5/IEC61000-4-5 Criterion B, DC supply lines: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: 1 kV Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN61000-4-6/IEC61000-4-6 Criterion A, Test voltage 10 V Interference emission Noise emission test according to EN 61000-6-3 Class B Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g Shock in acc. with EN60068-2-27/IEC60068-2-27 30g Continuous shock according to EN60068-2-27/IEC60068-2-27 10g Protection class III (IEC61140, EN61140, VDE0140-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 01/18/2021Page4/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Connection diagram Block diagram S FE Sercos Sercos RDY SD RJ45 S SD D RDY D E 5V E RJ45 3.3V 12 14 0 2 4 6 8 10 S1 X10 UL FE 0 2 CD AB EF 89 S2 4 6 24 V DC + (UL) X1 Service !C Reset Local bus UBus UL 3.3 V UBus 24 V UL 24 V Internal wiring of the terminal points Dimensional drawing 122,4 74 126,1 45 Classifications eCl@ss eCl@ss 10.0.1 27242608 eCl@ss 11.0 27242608 eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 01/18/2021Page5/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Classifications eCl@ss eCl@ss 7.0 27242608 eCl@ss 8.0 27242608 eCl@ss 9.0 27242608 ETIM ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 5.0 EC001604 ETIM 6.0 EC001604 ETIM 7.0 EC001604 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 UNSPSC 21.0 32151602 Approvals Approvals Approvals LR / KR / NK / ABS / BSH / RINA / PRS / BV / DNV GL / UL Listed / cUL Listed / UL Listed / cUL Listed / cULus Listed Ex Approvals Approval details LR http://www.lr.org/en LR2001902TA 01/18/2021Page6/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Approvals KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002 NK http://www.classnk.or.jp/hp/en/ 14A006 ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA BSH 840 RINA http://www.rina.org/en ELE030120XG PRS http://www.prs.pl/ TE/2239/880590/19 BV http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials 36433/B1 BV DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 01/18/2021Page7/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Approvals cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cULus Listed Accessories Accessories Data cable by the meter Network cable-FL CAT5 HEAVY-2744814 CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm, solid conductor, shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm 0.15 mm diameter Installation cable-FL CAT5 FLEX-2744830 By the meter, Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL5021, 4-wire (2x2xAWG26/7; SF/UTP), color single wire: white/orange-orange, white/green-green, cable length: Free entry (1.0 ... 1000.0 m) Data plug Assembly tool-FL CRIMPTOOL-2744869 Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45..., for assembly on site Device marking 01/18/2021Page8/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Accessories Insert label-EMT (35X18,7)R-0801831 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 18.7 mm, Number of individual labels: 500 DIN rail connector Bus connector-AXL BS BK-2701422 Axioline F bus base module for housing type BK Plug RJ45 connector-FL PLUG RJ45 GR/2-2744856 RJ45 connector, shielded, with bend protection sleeve, 2 pieces, gray for straight cables, for assembly on site. For connections that are not crossed, it is recommended that you use the connector set with gray bend protection sleeve. RJ45 connector-FL PLUG RJ45 GN/2-2744571 RJ45 connector, shielded, with bend protection sleeve, 2 pieces, green for crossed cables, for assembly on site. For connections that are crossed, it is recommended that the connector set with green bend protection sleeves is used. Programming cable 01/18/2021Page9/10 https://www.phoenixcontact.com/us/products/2701686 Bus coupler-AXL F BK S3-2701686 Accessories Connecting cable-CAB-USB A/MICRO USB B/2,0M-2701626 Connecting cable, for connecting the controller to a PC for PC Worx and LOGIC+, USB A to micro USB B, 2 m in length. Terminal marking Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579 Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/18/2021Page10/10