SURFACE MOUNT DISPLAY ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES KPSC03-110 BLUE Description Features 0.3 INCH DIGIT HEIGHT. The Blue source color devices are made with InGaN on SiC LOW CURRENT OPERATION. Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. Static electricity and surge damage the LEDS. I.C. COMPATIBLE. It is recommended to use a wrist band or anti- MECHANICALLY RUGGED. electrostatic glove when handling the LEDs. GRAY FACE,WHITE SEGMENT. All devices, equipment and machinery must be electrically grounded. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-110 BLUE (InGaN) Iv (ucd) @ 10mA Lens Type WHITE DIFFUSED Description Min. Typ. 1900 7400 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Blue D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 65 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.65 4.2 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 2 OF 4 Blue KPSC03-110 SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 3 OF 4 KPSC03-110 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 4 OF 4