SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
Description
The Blue source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
KPSC03-110 BL UE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
SURFACE MOUNT DISPLAY
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 550PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
KPSC03-110 BLUE (InGaN) WHITE DIFFUSED 1900 7400 Common Cathode, Rt.
Hand Decimal.
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter Blue Units
Power dissipation 102 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Blue 468 nm IF=20mA
λDDominant Wavelength Blue 470 nm IF=20mA
∆λ1/2 Spectral Line Half-width Blue 25 nm IF=20mA
C Capacitance Blue 65 pF VF=0V;f=1MHz
VFForward Voltage Blue 3.65 4.2 V IF=20mA
IRReverse Current Blue 10 uA VR = 5V
SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 PAGE: 3 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
Blue KPSC03-110
SPEC NO: DSAB1993 REV NO: V.6 DATE: AUG/22/2005 PAGE: 4 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
KPSC03-110
Recommended Soldering Pattern
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specifications
(Units : mm)