TPD3F303 SLVSAM5 - JANUARY 2011 www.ti.com EMI FILTER WITH INTEGRATED VCC CLAMP FOR SIM CARD INTERFACE Check for Samples: TPD3F303 FEATURES 1 * * * * * Bidirectional EMI/RFI Filtering and Line Termination with Integrated ESD Protection Robust ESD Protection Exceeds IEC 61000-4-2 (Level 4) - 15-kV Human-Body Model (HBM) - 15-kV IEC 61000-4-2 (Contact Discharge) - 15-kV IEC 61000-4-2 (Air-Gap Discharge) Breakdown voltage 6-V Low Noise C-R-C Filter Topology Integrated VCC Clamp Eliminates the Need for External ESD Protection Space Saving DPV (0.5-mm Pitch), DQD Packages (0.4-mm Pitch) APPLICATIONS DATA1_Out 1 8 DATA1_In CLK_Out 2 7 CLK_In DATA2_Out 3 6 DATA2_In NC 4 5 VCC 2.1-mm x 1.6-mm DPV (0.5-mm Pitch) 1.7-mm x 1.35-mm DQD (0.4-mm Pitch) SIM Controller Mobile handsets PDAs Video Consoles Portable Computers 4 5 VCC GND 3 6 Reset VPP 7 CLK I/O NC NC 2 1 GND * * * * TPD3F303 PACKAGE (TOP VIEW) GND * 8 Figure 1. Board Layout with TPD3F303 at the SIM Card Interface DESCRIPTION/ORDERING INFORMATION The TPD3F303 is a 3-ch integrated EMI filter for SIM interface. This device integrates a VCC clamp to provide system level ESD protection at the VCC line. Termination resistor value of 47 is included on the CLK line, while a 100 termination is employed at the DATA and RST line. The low-pass filter arrays reduce EMI emissions and provide system level ESD protection. Because of its small package and easy-to-use pin assignments, the TPD3F303 filter is suitable for a wide array of applications such as mobile handsets, PDAs, video consoles, notebook computers, etc. The TPD3F303 is designed to suppress EMI/RFI noise in systems subjected to electromagnetic interferences. These filter series include an ESD protection circuitry which prevents damage to the application when subjected to ESD stress far exceeding IEC 61000-4-2 (Level 4). The TPD3F303 is specified for -40C to 85C operation. ORDERING INFORMATION PACKAGE (1) TA -40C to 85C (1) (2) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING 8 - DPV Tape and reel TPD3F303DPVR 6SS 8 - DQD Tape and reel TPD3F303DQDR 6SS Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2011, Texas Instruments Incorporated TPD3F303 SLVSAM5 - JANUARY 2011 www.ti.com CIRCUIT DIAGRAMS 45 Pin 7 Pin 5 Pin 2 100 Pin 6,8 GND GND GND Schematic for VCC Schematic for CLK Line Pin 1,3 Schematic for DATA1, DATA2 Lines TERMINAL FUNCTIONS TERMINAL NAME DPV/DQD PIN NO. DATAx_IN, DATAx_OUT 1, 3, 6, 8 CLK_OUT, CLK_IN V 2, 7 VCC 5 TYPE DESCRIPTION Data and Rest signals Input, Output pins. The DATA1 and DATA2 are symmetric circuits. Input, Output They can be used interchangeably for either DATA or RESET pins based off board layout Pins scheme. Input, Output Clock Input and Output signals. Pins Power Clamp ESD Clamp circuit for the VCC pin. NC 4 No Connect GND Central ground Pad Ground Not connected to any internal circuit. Leave this pin floating. Ground connection for the EMI filter. It is very important to connect the device GND to the printed circuit board ground plane through Vias directly under the package. ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN IO voltage tolerance IO pins MAX UNIT 5.5 V C TA Operating free-air temperature range -40 85 Tstg Storage temperature range -55 155 C (1) IEC 61000-4-2 Contact Discharge IO pins 15 KV IEC 61000-4-2 Air-gap Discharge IO pins 15 KV Human Body Model ESD IO pins 15 KV Stresses beyond those listed under "ABSOLUTE MAXIMUM RATINGS" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum-rated conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT 10 V 0.1 A 55 100 115 20 24 pF Vclamp Clamp voltage IIO = 2 A IO pin to ground II Leakage current RPU = Open IO pin to ground RCLK CLK series resistors 40 47 RDAT_RST Data/RST series resistors 85 CTotal IO Capacitance VIO = 0 V 16 VBR Break-down Voltage IIO = 1 mA F-3dB Z = 50 -3 dB BW for DATA/RESET line SOURCE ZLOAD = 50 2 IO Pins to GND Submit Documentation Feedback 6 V 294 MHz Copyright (c) 2011, Texas Instruments Incorporated Product Folder Link(s): TPD3F303 TPD3F303 SLVSAM5 - JANUARY 2011 www.ti.com ELECTRICAL CHARACTERISTICS (continued) over operating free-air temperature range (unless otherwise noted) PARAMETER F-3dB -3 dB BW for CLK line TEST CONDITIONS ZSOURCE = 50 ZLOAD = 50 MIN TYP MAX 308 Submit Documentation Feedback Copyright (c) 2011, Texas Instruments Incorporated Product Folder Link(s): TPD3F303 UNIT MHz 3 TPD3F303 SLVSAM5 - JANUARY 2011 www.ti.com TYPICAL OPERATING CHARACTERISTICS 100 1.0 90 0.8 80 0.6 IIO - Input Offset Current - mA IIO - Input Offset Current - pA VIO = 2.5 V 70 60 50 40 0.2 0.0 -0.2 30 -0.4 20 -0.6 10 0 -40 0.4 tA = 25C -0.8 -15 10 35 60 TA - Free-Air Temperature - C -1.0 -2 85 -1 0 Figure 2. IIO vs Temperature, VIO = 2.5V 1 2 3 4 5 6 VIO - Input Offset Voltage - V 7 8 Figure 3. IIO vs VIO -0 0 0 V Bias -10 -5 -20 -10 DATA CLK -30 CLK_IN to DATA2_OUT -40 -15 Loss - dB Loss - dB -50 -20 -25 -30 -60 -70 -80 -90 -35 -100 -40 -110 DATA1_IN to DATA2_OUT -120 DATA1_IN to CLK_OUT -45 -130 -50 1.0E+05 1.0E+06 1.0E+07 1.0E+08 f - Frequency - Hz 1.0E+09 1.0E+10 -140 1.0E+05 1.0E+06 Figure 4. Frequency Response Data (0 V Bias) 4 Submit Documentation Feedback 1.0E+07 1.0E+08 f - Frequency - Hz 1.0E+09 1.0E+10 Figure 5. Channel-to-Channel Crosstalk Copyright (c) 2011, Texas Instruments Incorporated Product Folder Link(s): TPD3F303 TPD3F303 SLVSAM5 - JANUARY 2011 www.ti.com TYPICAL OPERATING CHARACTERISTICS (continued) 35 80 TA = 25C 60 DATA_In 40 30 DATA_Out 20 0 20 Amplitude - V Capacitance - pF 25 Data CLK 15 -20 -40 -60 -80 -100 -120 10 -140 -160 VCC 5 -180 -200 0 0 0.5 1 1.5 2 2.5 3 3.5 VBIAS - V 4 4.5 5 -220 0 5.5 25 220 80 200 60 180 40 160 20 140 0 120 DATA_In 100 80 60 DATA_Out 40 -160 -40 -180 -60 -200 175 200 DATA_Out -80 -140 150 DATA_In -100 0 75 100 125 t - Time - nS 200 -60 -20 50 175 -40 -120 25 150 -20 20 -80 0 75 100 125 t - Time - nS Figure 7. IEC Clamping Waveforms -15 kV Contact, DATA1_In Stressed Amplitude - V Amplitude - V Figure 6. Capacitance vs VBIAS, tA = 25C 50 -220 0 25 Figure 8. IEC Clamping Waveforms +15 kV Contact, DATA1_In Stressed 50 75 100 125 t - Time - nS 150 175 Figure 9. IEC Clamping Waveforms -15 kV Contact, CLK_In Stressed Submit Documentation Feedback Copyright (c) 2011, Texas Instruments Incorporated Product Folder Link(s): TPD3F303 200 5 TPD3F303 SLVSAM5 - JANUARY 2011 www.ti.com TYPICAL OPERATING CHARACTERISTICS (continued) 220 200 180 160 Amplitude - V 140 120 DATA_In 100 80 60 DATA_Out 40 20 0 -20 -40 -60 -80 0 6 25 50 75 100 125 150 175 t - Time - nS Figure 10. IEC Clamping Waveforms +15 kV Contact, CLK_In Stressed Submit Documentation Feedback 200 Copyright (c) 2011, Texas Instruments Incorporated Product Folder Link(s): TPD3F303 PACKAGE OPTION ADDENDUM www.ti.com 3-Mar-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TPD3F303DPVR ACTIVE USON DPV 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPD3F303DQDR ACTIVE WSON DQD 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (3) Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 21-Jan-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TPD3F303DPVR USON DPV 8 3000 180.0 8.4 1.84 2.32 0.78 4.0 8.0 Q1 TPD3F303DQDR WSON DQD 8 3000 180.0 8.4 1.65 2.0 0.95 4.0 8.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 21-Jan-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPD3F303DPVR USON DPV 8 3000 202.0 201.0 28.0 TPD3F303DQDR WSON DQD 8 3000 202.0 201.0 28.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated