B39201-B5045-H510 - EPCOS - Datasheet.Directory

SAW filters for infrastructure systems

Series/Type: B5045

The following products presented in this data sheet are being withdrawn.

Ordering Code Substitute Product Date of Withdrawal Deadline Last

Orders Last Shipments

B39201B5045H510 2012-01-13 2012-12-31 2013-03-30

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a

suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.

2January 12, 2009

B5045

201.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW IF filter

Data Sheet

Application

■Low-loss IF filter for GSM / EDGE base station

■Usable passband 220 kHz

■Temperature stable

■Balanced or unbalanced operation possible

Features

■Package size 13.3 x 6.5 x 1.6 mm3

■Package code DCC12A

■RoHS compatible

■Approx. weight 0.4 g

■Ceramic package for Surface Mount Technology

(SMT)

■Ni, gold-plated terminals

■Electrostatic Sensitive Device (ESD)

■Filter surface passivated

Pin configuration

■1, 10 Input

■5, 6 Output

■3, 8 To be grounded

■2, 4, 7, 9 Case ground

3January 12, 2009

B5045

201.0 MHz

SAW Components

SAW IF filter

Data Sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics

Operating temperature range: T = 0 to 70 ˚C

Terminating source impedance: ZS= 200 Ωbalanced and matching network

Terminating load impedance: ZL= 200 Ωbalanced and matching network

min. typ.

@ 25 ˚C max.

Nominal frequency fN— 201.0 — MHz

Minimum insertion attenuation αmin — 4.4 5.5 dB

(including matching network)

Passband width B1.0dB

αrel ≤1 dB — 290 — kHz

Amplitude ripple (p-p) ∆α

fN± 110 kHz — 0.6 1.0 dB

Group delay ripple (p-p) ∆τ

fN± 110 kHz — 1.0 1.5 µs

Absolute group delay τ

at fN1.7 1.95 2.2 µs

Relative attenuation (relative to αmin)αrel

fN±300 kHz ... fN±400 kHz 16 25 — dB

fN±400 kHz ... fN±600 kHz 27 30 — dB

fN±600 kHz ... fN±800 kHz 28 35 — dB

fN± 800 kHz ... fN± 35 MHz 38 45 — dB

Impulse response attenuation (relative to max.)

> 3 µs after main lobe 10 12 — dB

> 30 µs after main lobe 50 60 — dB

IM3 level (Input level -17 dBm)

fN±800 kHz — — -110 dB

fN±1600 kHz — — -110 dB

Temperature coefficient of frequency1)

1) Temperature dependance of fc:f

c(TA) = fc(T0) (1 + TCf(TA – T0)2)

TCf— –0.036 — ppm/K2

Turnover temperature T0—35—˚C

4January 12, 2009

B5045

201.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW IF filter

Data Sheet

Matching network to 200 Ω balanced

Transformers are only required for measurement in a 50 Ω environment.

Element values depend upon PCB layout and properties.

Maximum ratings

Operable temperature range T –40/+85 ˚C

Storage temperature range Tstg –40/+85 ˚C

DC voltage VDC 0 V

ESD voltage VESD 2001)

1) acc. to J-STD22A-0115A (machine model, 1 pulse +/-).

V machine model, 1 pulse

Input power PIN 10 dBm

Cp1 = 19 pF

Ls2 = 22 nH

Ls3 = 22 nH

Cp4 = 18 pF

5January 12, 2009

B5045

201.0 MHz

SAW Components

SAW IF filter

Data Sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Transfer function

Transfer function (passband)

6January 12, 2009

B5045

201.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW IF filter

Data Sheet

References

Type B5045

Ordering code B39201-B5045-H510

Marking and package C61157-A7-A94

Packaging F61074-V8163-Z000

Date codes L_1126

S-parameters

Soldering profile S_6001

RoHS compatible defined as compatible with the following documents:

"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT

AND OF THE COUNCIL of 27 January 2003 on the restriction

of the use of certain hazardous substances in electrical and

electronic equipment. 2005/618/EC from April 18th, 2005,

amending Directive 2002/95/EC of the European Parliament

and of the Council for the purposes of establishing the maxi-

mum concentration values for certain hazardous substances in

electrical and electronic equipment."

For further information please contact your local EPCOS sales office or visit our webpage at

ww.epcos.com .

Published by EPCOS AG

Surface Acoustic Wave Components Division

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2009. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

he international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

he type in question please also contact one of our Sales Offices.

7January 12, 2009

Important notes

he following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties

described in the product speciﬁcation is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as speciﬁed. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained

by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be avail-

able. The aforementioned does not apply in the case of individual agreements deviating from

the foregoing for customer-speciﬁc products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,

MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIM-

DAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks reg-

istered or pending in Europe and in other countries. Further information will be found on the

Internet at www.epcos.com/trademarks.