BRT13HX009T - VISHAY - Datasheet.Directory

BRT11, BRT12, BRT13

www.vishay.com Vishay Semiconductors

Rev. 1.7, 12-Oct-2020 1Document Number: 83689

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototriac Output, Non-Zero Crossing

LINKS TO ADDITIONAL RESOURCES

DESCRIPTION

The BRT11, BRT12, and BRT13 product family consists of

AC optocouplers non-zero voltage detectors consisting of

two electrically insulated lateral power ICs which integrate a

thyristor system, a photo detector and noise suppression at

the output and an IR GaAs diode input.

FEATURES

•I

TRMS = 300 mA

• High static dV/dt < 10 000 V/μs

• Electrically insulated between input and output

circuit

• Microcomputer compatible - very low trigger

current

• Trigger current

- (IFT < 1.2 mA) BRT12F

- (IFT < 2 mA) BRT11H, BRT12H, BRT13H

- (IFT < 3 mA) BRT12M, BRT13M

• Non-zero voltage detectors high input sensitivity

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Industrial controls

• Office equipment

• Consumer appliances

AGENCY APPROVALS

•UL 1577

•cUL

•DIN EN 60747-5-5 (VDE 0884-5), available with option 1

Note

(1) Also available in tube, do not put T on the end

MT2

MT1

i179004-10

Documents

ORDERING INFORMATION

BRT1#x-X0##T

PART NUMBER PACKAGE OPTION TAPE

AND

REEL

AGENCY

CERTIFIED / PACKAGE

VDRM (V)

≤ 400 ≤ 600 ≤ 800

UL IFT = 2 mA IFT = 1.2 mA IFT = 2 mA IFT = 3 mA IFT = 2 mA

DIP-6 BRT11H BRT12F BRT12H BRT12M BRT13H

DIP-6, 400 mil, option 6 - - BRT12H-X006 - BRT13H-X006

SMD-6, option 7 - BRT12F-X007T BRT12H-X007T (1) - BRT13H-X007T (1)

SMD-6, option 9 - - BRT12H-X009T - BRT13H-X009T

UL, VDE IFT = 2 mA IFT = 1.2 mA IFT = 2 mA IFT = 3 mA IFT = 2 mA

DIP-6 - - BRT12H-X001 BRT12M-X001 -

DIP-6, option 6 - - BRT12H-X016 - -

SMD-6, option 7 ----BRT13H-X017T

7.62 mm

DIP-6

10.16 mm

Option 6

> 0.1 mm

Option 9

> 0.7 mm

Option 7

BRT11, BRT12, BRT13

www.vishay.com Vishay Semiconductors

Rev. 1.7, 12-Oct-2020 2Document Number: 83689

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

maximum ratings for extended periods of the time can adversely affect reliability

(1) Test AC voltage in accordance with DIN 57883, June 1980

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6V

Forward current IF20 mA

Surge forward current IFSM 1.5 A

Power dissipation t ≤ 10 μs Pdiss 30 mW

OUTPUT

Repetitive peak off-state voltage

BRT11 VDRM 400 V

BRT12 VDRM 600 V

BRT13 VDRM 800 V

RMS on-state current ITRMS 300 mA

Single cycle surge current 50 Hz ITSM 3A

Power dissipation Pdiss 600 mW

COUPLER

Maximum power dissipation Ptot 630 mW

Reference voltage in accordance

with VDE 0110 b Vref 500 VRMS

Reference voltage in accordance

with VDE 0110 b (insulation group C) Vref 600 VDC

Storage temperature range Tstg -40 to +150 °C

Ambient temperature range Tamb -40 to +100 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = 10 mA VF- 1.1 1.35 V

Reverse current VR = 6 V IR- - 10 μA

Thermal resistance,

junction to ambient (1) RthJA --750°C/W

OUTPUT

Peak off-state voltage ID(RMS) = 100 μA

BRT11

VDM

- 400 - μA

BRT12 - 600 - μA

BRT13 - 800 - μA

Off-state current TC = 80 °C, VDRM ID-0.5100μA

On-state voltage IT = 300 mA VT--2.3V

Pulse current tp ≤ 5 μs, f = 100 Hz, dItp/dt ≤ 8 A/μs Itp --2A

Critical rate of rise of off-state voltage VD = 0.67 VDRM, Tj = 25 °C dV/dtcr 10 - - kV/μs

VD = 0.67 VDRM, Tj = 80 °C dV/dtcr 5--kV/μs

Critical rate of rise of voltage at

current commutation

VD = 0.67 VDRM, Tj = 25 °C,

dI/dtcrq ≤ 15 A/ms dV/dtcrq 10 - - kV/μs

VD = 0.67 VDRM, Tj = 80 °C,

dI/dtcrq ≤ 15 A/ms dV/dtcrq 5--kV/μs

Critical rate of rise of on-state

at current dI/dtcr 8--A/μs

Holding current VD = 10 V IH- 80 500 μA

Thermal resistance, junction to ambient RthJA --125°C/W

BRT11, BRT12, BRT13

www.vishay.com Vishay Semiconductors

Rev. 1.7, 12-Oct-2020 3Document Number: 83689

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements

(1) Static air, SITAC soldered in PCB or base plate

Note

• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with

the safety ratings shall be ensured by means of protective circuits

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 1 - Typical Trigger Delay Time Fig. 2 - Power Dissipation 60 Hz to 60 Hz Line Operation

COUPLER

Trigger current

VD = 10 V, F - versions IFT --1.2mA

VD = 10 V, H - versions IFT 0.4 - 2 mA

VD = 10 V, M - versions IFT 0.8 - 3 mA

Trigger current temperature gradient ΔIFT/ΔTj- 7 14 μA/°C

Capacitance (input to output) f = 1 MHz, VR = 0 V CIO --2pF

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Climatic classification According to IEC 68 part 1 55 / 100 / 21

Comparative tracking index CTI 175

Maximum rated withstanding isolation voltage t = 1 min VISO 4420 VRMS

Maximum transient isolation voltage VIOTM 10 000 Vpeak

Maximum repetitive peak isolation voltage VIORM 890 Vpeak

Isolation resistance VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω

VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω

Output safety power PSO 400 mW

Input safety current ISI 275 mA

Safety temperature TS175 °C

Creepage distance ≥ 7.2 mm

Clearance distance ≥ 7.2 mm

Insulation thickness DTI ≥ 0.4 mm

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

= f(IF/IFT25 °C)

D = 200 V

100 5 101 102

100

101

102

103

IF/IFT25°C

17239

tgd

TJ = 25°C

100°C

17240

tot = (ITRMS

)

0 100 200 mA 300

/TRMS

0.2

0.3

0.1

0.0

0.4

0.5

0.6

Ptot

180°

120°

90°

60°

30°

BRT11, BRT12, BRT13

www.vishay.com Vishay Semiconductors

Rev. 1.7, 12-Oct-2020 4Document Number: 83689

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Off-State Current

Fig. 4 - Pulse Trigger Current

Fig. 5 - Typical Input Characteristics

Fig. 6 - Typical Output Characteristics

Fig. 7 - Current Reduction

Fig. 8 - Current Reduction

17241

= f(T

)

= 800 V

20 40 60 80 °C 100

- 1

- 0

- 1

- 2

- 3

17242

IFTN=f(tpIF)

IFTN normalized to IFT refering

to tpIF ≥1m

Vop=220V,f= 4 0 ...60Hz typ.

17243

F = ƒ ( V

)

0.9

= 75 °C

10 - 1

10 - 0

10 - 1

10 - 2

1.0 1.1 1.2

25 °C

50 °C

17244

IT=ƒ(VT)

10 - 1

10 - 0

10 - 3

10 - 2

Tj= 25 °C

100 °C

123V4

17245

TRMS = ƒ ( T

thJA = 125 K/W 3)

0 20 40 60 80 °C 100

100

200

300

400

ITRMS

17246

ITRMS = ƒ(TPIN5)

RthJ-PIN5= 16,5 K/W 4)

BRT11, BRT12, BRT13

www.vishay.com Vishay Semiconductors

Rev. 1.7, 12-Oct-2020 5Document Number: 83689

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters

PACKAGE MARKING (example)

Notes

• Only options 1, and 7 are reflected in the package marking

• The VDE logo is only marked on option 1 parts

• Tape and reel suffix (T) is not part of the package marking

20802-40

Option 6 Option 7 Option 8 Option 9

10.16 typ.

7.62 typ.

8 min.

7.62 typ.

4.3 ± 0.3

0.6 min.

10.3 max.

0.7 min.

7.62 typ.

12.1 max.

9.27 min.

10.3 max.

7.62 typ.

8 min.0.6 min.

0.1 ± 0.1 3.6 ± 0.3

3.5 ± 0.3

2.55 ± 0.25

0.1 min.

0.25 ± 0.1

3.5 ± 0.3

0.765 ± 0.255

7.62 ref.

9.78 ± 0.25

0.30 typ.

0.1755 ± 0.0735

15° max.

6.4 ± 0.1

8.6 ± 0.1

pin one ID

ISO method A

3.555 ± 0.255

0.84 typ.

2.54 typ.

1 min.

0.485 ± 0.025

1.27 ± 0.05

4° typ.

17222

0.84 typ.

BRT12H

V YWW H 68

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.