KPT / KPSE / KPTC Connectors
In Accordance with VG95328
www.ittcannon.com
2
Key Features
• Simple to install and maintain
• Hand insertable contacts
• No wedge locks or blind seals required
• From 2 way to 24-way layouts
• Up to IP69K sealing
• Utilizes Trident Contacts
• Positive locking latch & polarization key
• Excellent cost/performance ratio
For more than a century, ITT Cannon has developed innovative interconnect solutions for the world’s harshest environ-
ments.
With facilities in the United States, Germany, Italy, Mexico, China and Japan, each with its unique strengths, we offer our
customers
interconnect solutions that are truly Engineered for Life.
In addition to this truly global footprint, we offer highly specialized, segmented industry expertise. We have a proven track record
as
an industry leader in harsh-environment applications. This has equipped us with the knowledge needed to continue
to produce
the most resilient, reliable connectors for our customers’ most challenging conditions.
Interconnect solutions for the
harshest environments.
We Connect
When it matters most
The ITT Cannon difference
• Global capabilities & local support
• Proven application expertise
• A century of interconnect leadership
• A committed innovator & business partner
About ITT
ITT is a diversified leading manufacturer of highly engineered
critical components and customized technology solutions
for the energy, transportation and industrial markets.
Building on its heritage of innovation, ITT partners with its
customers to deliver enduring solutions to the key industries
that underpin our modern way of life. Founded in 1920,
ITT is headquartered in White Plains, N.Y., with employees in
more than 35 countries and sales in a total of approximately
125 countries. For more information, visit www.itt.com.
www.ittcannon.com 3
Our connector portfolio
remains the most extensive
in the industry, offering a reliable and cost
effective range of interconnect solutions
Medical
Oil & Gas
Commercial & Military Aerospace
Heavy Equipment
Rail
lndustrial / lnstrumentation
Defense Vehicles
www.ittcannon.com
4
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Introduction to KPSE /KPT /KPTC
ITT Cannon’s KPSE / KPT and KPTC series of miniature positive bayonet locking
connectors offer a range of high-density signal solutions. They are designed
according to MIL-DTL-26482 Series I or VG95328 – details below. Next to the
original use in military vehicles these connector series have become a standard
for Industrial uses as eg. off-road vehicles, sensors, factory equipment and other
heavy industry applications.
All three product lines have specific characteristics and provide a set of unique variants, however, all lines are
fully intermateable with each other as well as any other connector series designed to MIL-DTL 26482 Series I
or VG95238 standards.
KPSE is the high-performance crimp contact solution featuring a
clip-in retention system for fast and simple assembly. ITT Cannon
is approved to offer this line with VG marking according to
VG95328.
KPT is the first of two general duty series, and equipped with
solder pot contacts and glued in contacts. This makes this product
ideal for any prototype solution as well as for military
vehicle applications based on the MIL-DTL-268482 Series I
standard.
KPTC is the second ITT Cannon general duty series with either
crimp or solder pot contact versions. In comparison this series
comes with a simpler design and avoids the high-performance
clip-in solution of KPSE as well as the glued contact assembly
of KPT which makes this line a good choice for many Industrial
applications.
Both KPTC as well as KPT add typical Industrial back shells to
their portfolio.
Common features of KPSE / KPT / KPTC:
➤ Intermateability with all product lines designed
to MIL-DTL-26482 Series I
➤ Environmental sealing to IP67 and IP68
➤ ½ turn positive bayonet coupling for quick mating
& unmating
➤ Shielded backshell accessories
➤ A range of RoHS compliant plating alternatives to
Cadmium including Nickel, Zinc Nickel and Zinc
Cobalt versions
➤ Customizing options
This document solely applies to European manufactured KPT / KPSE / KPTC products.
Product Series Origin VG 95328 Approved MIL-DTL 26482 Series I Approved
KPSE German make/origin Yes No
KPSE US make/origin No No
KPT German make/origin No No
KPT US make/origin No No
KPTC German make/origin No No
www.ittcannon.com 5
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
KPSE uses a three piece insulator stack up consisting of
1 - rubber insulator
2 - plastic wafer / retaining clips
3 - ubber grommet to seal individual wires
4 - two piece machined contact with retaining clip
Rubber insulator (1) and grommet (3) together with the front sealing ring provide
the sealing in mated condition as well as the sealing of individual wires protruding
through the grommet.
Contact retention is provided using a two piece contact with retaining clip. The stiff
plastic wafer or individual metal clips provide the specified contact retention. A good
tactile response is given when contacts are pushed in the final assembly position.
Contacts are installed from the rear by hand or with an insertion tool to ease assembly.
Contact removal is done with an extraction tool from the front.
KPT uses a rubber insulator and sealing grommet
1 - rubber insulator
2 - rubber grommet to seal individual wires
3 - one piece machined contact
Rubber insulator (1) and grommet (2) together with the front sealing ring provide the
sealing in mated condition as well as the sealing of individual wires protruding through
the grommet.
Contact retention is provided by form fit of the machined contact in the rubber
insulator. Additionally, glue is applied to secure contacts in the exact mounting
position. KPT is equipped with solder pot contacts only and pre installed by the factory.
KPTC uses a rubber insulator and sealing grommet
1 - rubber insulator
2 - rubber grommet to seal individual wires
3 - one piece machined contact
Rubber insulator (1) and grommet (2) together with the front sealing ring
provide the sealing in mated condition as well as the sealing of individual wires
protruding through the grommet.
Contact retention is provided by form fit of the machined contact in the rubber
insulator. Solder pot contacts are pre-installed by the factory, crimp contacts are
delivered separately. Glue is not applied to KPTC connectors.
Contacts are installed from the rear with an insertion tool.
Contact removal is done with an extraction tool from the front.
Contact Principle
CONTACT & SEALING PRINCIPLE
3
4
2
1
3
2
1
3
2
1
www.ittcannon.com
6
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Contact and sealing principle ................................5
How to use this catalogue ......................................7
Product overview ...................................................8
Panel cutouts .......................................................10
Ordering reference ...............................................11
Contact arrangements ..........................................14
Alternate insert positions ......................................17
Wall mounting receptacles ...................................18
Cable connecting plugs ........................................ 21
Box mounting receptacles ....................................23
Thru-bulkhead receptacles ....................................24
Straight plugs ......................................................24
Jam nut receptacles ..............................................28
Right angle plugs .................................................31
Receptacles with PCB solder pins ..........................32
Accessories and tooling
Protective caps .....................................................33
Dummy receptacle ...............................................35
Cross reference lists .............................................36
Tools and accessories ...........................................37
Product safety information ...................................40
Table of contents
www.ittcannon.com 7
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Select your product using the “ordering reference” option
Use the detail pages to better understand the available
options and choose the best solution for your needs
Add accessories and tooling as required on the
related pages
Use the contact information on the back cover to contact
us for further questions or to get advice on where you can
purchase our products
1
2
3
4
How to use
This catalog is split in several sections that help you to
• get a general overview of all product lines (product overview)
• create a product part number step by step
(ordering reference)
• get all required detail information (dimensions, product details)
• get all required support products (accessories, tooling)
The fastest way to find your product of choice is to follow these steps
www.ittcannon.com
8
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Product overview KPSE (VG95328), KPT, KPTC
Electrical Data
Size Rated current A Test current A Millivolt drop mV
20 7,5 7,5 Less than 50
16 13,0 13,0 Less than 50
Contact to contact crimp Contact to contact solder Contact to shell
Service Class 1 1,9 mm 0,75 mm 1,0 mm
Service Class 2 2,8 mm 1,53 mm 2,8 mm
Service class VG95328 MIL-C-26482
1 140 VDC/100 VAC 850 VDC/600 VAC
2 165 VDC/115 VAC 1400 VDC/1000 VAC
Contact rating at 60°C:
Current rating vs. ambient temperature:
Comment for contact rating and current rating:
Rated current values shown are the max. current flowing continuously (not intermittently) through one contact pair with
the same cross section with regard to ambient temperature. If multiple contact pairs are loaded into a connector the
current rating curve has to be reduced.
Comment: When connectors in this catalog are used at voltages exceeding > 50VAC / 75VDC safety provisions as defined
in the European low voltage directive 2014/35/EU have to be adhered to. For use in other regions see appropriate local
regulations.
Minimum air & creepage paths:
Insulation resistance: ~ 5000 MOhm
Operating voltage:
0
1
2
3
4
5
6
7
8
9
10
11
12
13
20 30 40 50 60 70 80 90 100 110 120 130
Rated current in A
Ambient Temperature in °C
Current Rating
Limit of
temperature
Contact #20
Contact #16
0
1
2
3
4
5
6
7
8
9
10
11
12
13
20 30 40 50 60 70 80 90 100 110 120 130
Rated current in A
Ambient Temperature in °C
Current Rating
Limit of
temperature
Contact #20
Contact #16
www.ittcannon.com 9
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Test voltage Service class Vrms VDC
Service Class 1 1 1500 2100
2 2300 3200
21336 M/70,000ft. 1 375 535
2 550 770
In mated condition for KPSE, KPT and KPTC product lines: IP67 acc. ISO 20653
VG95328 connectors: IP68 (0,2bar / 48h) – see below
According to VG95319 Part 2, Test No. 5.9.2 | For styles A to E and Z1, Z2 and Z3 and gaskets style A only, test pressure 0,2 bar overpressure, test
duartion 48h, test temperature 25±3°C, connector shall be free of moisture
Shell Aluminium alloy
Shell finishes - Cadmium, VG approved - ZnCobalt Black - Zinc Cobalt Green
- Zinc Nickel Blue Generation, for non-shielded versions - Nickel
Insulator Polychloroprene
Grommet and seals
Contacts Copper alloy, gold and silver plating
Ambient temperature: -55°C … 125°C
Vibration test acc. VG95328:
Vibration stress 150 m/s2, 10 Hz to 2000 Hz
and Random vibration stress, 5 Hz to 500 Hz acc. test 5.52 VG95328-1
All further details, product line options etc. see following catalog pages
Product line design principles:
KPSE: Clip in crimp contact system, VG approved versions
KPT: Solder contacts, pre-installed and fixed with glue, VG approved versions
KPTC: Crimp contacts for tool insertion OR pre-installed solder contacts (not fixed with glue)
Mating cycles: 500
Material:
Environmental sealing:
Test voltage:
Mechanical data
www.ittcannon.com
10
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
PANEL CUTOUTS KPT / KPSE / KPTC
BOX MOUNTING RECEPTACLE
Shell size For rear mounting For front mounting
Ø D +0,25 / 0 Ø D +0,25 / 0 R ±0,15 Ø T +0,3
814,0 12,7 15,1 3,1
10 17,0 16,0 18,3 3,1
12 22,0 19,0 20,6 3,1
14 25,0 22,2 23,0 3,1
16 28,0 25,5 24,6 3,1
18 31,0 28,5 27,0 3,1
20 34,5 31,7 29,4 3,1
22 37,5 35,0 31,8 3,1
24 41,0 38,0 34,9 3,6
PANEL THICKNESS
Shell size P – Panel thickness
Height of screw head included
82,2
10 2,2
12 2,2
14 2,2
16 2,2
18 2,2
20 5,4
22 5,4
24 5,4
JAM NUT RECEPTACLE
Shell size KPT / KPSE
Ø A +0,25 / –0
KPT / KPSE
B +0 / –0,12
8 14,5 13,6
10 17,7 16,8
12 22,7 20,9
14 25,7 24,1
16 28,8 27,2
18 32,0 30,4
20 35,1 33,6
22 38,4 36,8
24 41,5 40,0
www.ittcannon.com 11
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Series
KPSE – Cannon prefix crimp, contacts supplied
KPT – Cannon prefix solder, contacts installed
KPTC – Cannon prefix commercial version, contacts to be ordered separately.
See modification codes for contact options
Shell type (See note below)
Cannon designation omit 0 in case of a mod code and KPTC
00 – wall mounting receptacle see page 18-20
01 – cable connecting plug see page 21-23
02 – box mounting receptacle (class E only). see page 23-24
06 – straight plug see page 24-27
07 – jam nut receptacle see page 28-30
08 – 90° angle plug see page 31
KPTB - thru-bulkhead receptacle see page 24
Class
A – Endbell with thread, no grommet seal; for jam nut: without endbell
E – Pressure nut and grommet seal - for 90° versions: endbell with thread, and grommet seal
– with modification DN: Endbell for heat shrink boot and grommet seal
– with modification DZ: Endbell for heat shrink boot and grommet seal, shielded
F – Endbell with cable clamp and grommet seal
PG – endbell for PG glands
ME – endbell for metric glands
Shell size
8 – 24
Contact arrangement see page 14-16
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal position) see page 17
Modification see page 12
KPT / KPSE / KPTC KP.. 22 – 36E P W *02
How to order
Cannon Order reference
Note:
* If a modification is used the initial ‚0‘ in the shell style description is omitted e.g. KPT01E10-6P is changed to KPT1E10-6P-DN.
KPTC series does not use the initial ‚0‘ e.g. KPTC6E10-6P-C.
www.ittcannon.com
12
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
An example using these modifications:
KPT2E10-6P-EW-A232
* Note: Modification -F42 can only be used with Styles
0, 1, 6, 7 and 8. See details on pg 13
An example using these modifications:
KPSE7F16-8S-A240-F0
* Note: Modification -F42 can only be used with Styles
0, 1, 6, 7 and 8. See details on pg 13
An example using these modifications:
KPTC6F14-18P-H-MB
* Note: Modification -F42 can only be used with Styles
0, 1, 6, 7 and 8. See details on pg 13
Modification Codes
KPT:
Multiple codes can be used in
order of listing below:
Contact
PCB solder pin 0,76 x 7mm
(style 02 and 07 only) EX
PCB solder pin 0,6 x 7mm
(style 02 and 07 only) EW
Endbell
heat shrink boot adapter, grommet seal DN
shielded, heat shrink boot
adapter, grommet seal DZ
without endbell, grommet and ferrule F42*
Endbell for PG cable gland, class PG only
PG09 thread for connectors
with shell size 10 P9
PG11 thread for connectors
with shell size 12 P11
PG13,5 thread for connectors
with shell size 14 P13,5
PG16 thread for connectors
with shell size 16 P16
PG21 thread for connectors
with shell size 18, 20, 22 P21
PG29 thread for connectors
with shell size 24 P29
Endbell for Metric cable gland, class ME only
M12 thread for connectors
with shell size 10 M12
M16 thread for connectors
with shell size 12 M16
M20 thread for connectors
with shell size 16 M20
M25 thread for connectors
with shell size 18, 20 M25
M32 thread for connectors
with shell size 22, 24 M32
Plating (Cadmium with olive drab chromate
plating is standard - without code;
Alternative platings below)
Zinc Cobalt, black plating (RoHS
compliant) A232
Zinc Nickel plating (RoHS compliant) A240
Zinc Cobalt, green plating (RoHS
compliant) A233
Nickel plating (RoHS compliant) A34
KPSE:
Multiple codes can be used in
order of listing below:
Endbell
heat shrink boot adapter, grommet seal DN
shielded, heat shrink boot adapter,
grommet seal DZ
without endbell, grommet and ferrule F42*
Endbell for PG cable gland, class PG only
PG09 thread for connectors
with shell size 10 P9
PG11 thread for connectors
with shell size 12 P11
PG13,5 thread for connectors
with shell size 14 P13,5
PG16 thread for connectors
with shell size 16 P16
PG21 thread for connectors
with shell size 18, 20, 22 P21
PG29 thread for connectors
with shell size 24 P29
Endbell for Metric cable gland, class ME only
M12 thread for connectors
with shell size 10 M12
M16 thread for connectors
with shell size 12 M16
M20 thread for connectors
with shell size 16 M20
M25 thread for connectors
with shell size 18, 20 M25
M32 thread for connectors
with shell size 22, 24 M32
Plating (Cadmium with olive drab chromate
plating is standard - without code;
Alternative platings below)
Zinc Cobalt, black plating (RoHS
compliant) A232
Zinc Nickel plating (RoHS compliant) A240
Zinc Cobalt, green plating
(RoHS compliant) A233
Nickel plating (RoHS compliant) A34
Contact
Connector without contacts F0
KPTC:
Multiple codes can be used in
order of listing below:
Plating
Nickel plating (RoHS compliant) C
Zinc Cobalt black plating (RoHS
compliant) R
Zinc Cobalt green plating (RoHS
compliant) F
Zinc Nickel plating (RoHS compliant) H
Cadmium with olive drab chromate D
Endbell
heat shrink boot adapter, grommet seal DN
shielded, heat shrink boot adapter,
grommet seal DZ
without endbell, grommet and ferrule F42*
Endbell for PG cable gland, class PG only
PG09 thread for connectors
with shell size 10 P9
PG11 thread for connectors
with shell size 12 P11
PG13,5 thread for connectors
with shell size 14 P13,5
PG16 thread for connectors
with shell size 16 P16
PG21 thread for connectors
with shell size 18, 20, 22 P21
PG29 thread for connectors
with shell size 24 P29
Endbell for Metric cable gland, class ME only
M12 thread for connectors
with shell size 10 M12
M16 thread for connectors
with shell size 12 M16
M20 thread for connectors
with shell size 16 M20
M25 thread for connectors
with shell size 18, 20 M25
M32 thread for connectors
with shell size 22, 24 M32
Contact
Connector supplied with solder
pot contacts installed MA
Connector supplied with crimp contacts MB
PCB solder pin 0,76 x 7mm
(style 02 and 07 only) EX
PCB solder pin 0,6 x 7mm
(style 02 and 07 only) EW
www.ittcannon.com 13
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Drawing shows KP*1 Style
Specification
Shell type see page 36
A – wall mounting receptacle with straight endbell
B – wall mounting receptacle with cable clamp
C – box mounting receptacle
D – jam nut receptacle
E – jam nut receptacle with cable clamp
J – straight plug with adapter DN
K – straight plug with cable clamp
M – straight plug, version DZ
R – wall mounting receptacle, version DZ
S – jam nut receptacle with adapter DN
Shell size 8, 10, 12, 14, 16, 18, 20, 22 and 24
Contact arrangements see page 14-16
Contact type P – pin S – socket
Alternate insert position see page 17
With / without contacts
Without identification = with contacts
With -1 identification = without contacts
VG95328 18 – 1 – 1A S N
VG Order reference
Endbell Modification -F42
Below table shows the different threads that come with the respective shell sizes when
choosing the modification -F42 (no endbell/grommet seal).
This modification is only applicable to styles 0 (wall mounting receptacle), 1 (cable
connecting plug), 6 (straight plug), 7 (jam nut receptacle) and 8 (90° angle plug). The only
exception being KP*7A, as this combination already has no endbell/grommet.
How to order
Shell size Thread
87/16-28UNEF
10 9/16-24UNEF
12 11/16-24UNEF
14 13/16-20UNEF
16 15/16-20UNEF
18 1-1/16-18UNEF
20 1-3/16-18UNEF
22 1-5/16-18UNEF
24 1-7/16-18UNEF
www.ittcannon.com
14
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
CONTACT ARRANGEMENTS
View on mating face
of pin insulator No. of contacts
Contact arrangements
Service rating
Insulator position
Contact size
AWG W X Y Z
28-2
20
1 58 122 – –
38-3
20
1 60 210 – –
38-3A
20
1 60 – – –
38-33
20
1 90 – – –
48-4
20
1 45 – – –
6
10-6
20
1 90 – – –
7
10-7
20
1 90 – – –
6
10-98
20
1 90 180 240 270
3
12-3
16
2 – – 180 –
8
12-8
20
1 90 112 203 292
10 12-10
20
1 60 155 270 295
14 12-14
20
1 60 155 270 295
514-5
16
2 40 92 184 273
12
14-12
20 (8)
16 (4)
1 43 90 – –
Legend KPT KPSE KPTC authorized per VG95328
www.ittcannon.com 15
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
CONTACT ARRANGEMENTS
View on mating face
of pin insulator No. of contacts
Contact arrangements
Service rating
Insulator position
Contact size
AWG W X Y Z
15 14-15
20 (14)
16 (1)
1 17 110 155 234
18 14-18
20
1 15 90 180 270
19 14-19
20
1 30 165 315 –
514-22
12 (4)
20 (1)
1 ––––
414A4
Coax RG 188 U
(not for receptacle
shell style 02)
1 ––––
816-8
16
2 54 152 180 331
23 16-23
20 (22)
16 (1)
1 158 – – –
26 16-26
20
1 60 – 275 338
11 18-11
16
2 62 119 241 340
32 18-32
20
2 85 138 222 265
Legend KPT KPSE KPTC authorized per VG95328
www.ittcannon.com
16
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
CONTACT ARRANGEMENTS
View on mating face
of pin insulator No. of contacts
Contact arrangements
Service rating
Insulator position
Contact size
AWG W X Y Z
520A6
12
Note: contacts are 1 grounding pin and 4
standard size 12 pins
2 90 180 270 –
16 20-16
16
2 238 318 333 347
24 20-24
20
1 70 145 215 290
39 20-39
20 (37)
16 (2)
1 63 144 252 333
41 20-41
20
1 45 126 225 w–
21 22-21
16
2 16 135 175 349
36 22-36
20
1 72 144 216 288
41 22-41
20 (27)
16 (14)
1
2
39 135 264 –
55 22-55
20
1 30 142 226 314
61 24-61
20
1 90 180 270 324
Legend KPT KPSE KPTC authorized per VG95328
www.ittcannon.com 17
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ALTERNATE INSERT POSITION
The diagram indicates alternate insert
positions.
The six positions N, V, W, Y, Z differ in
degree of rotation for various sizes and
arrangements. For the exact degree of
rotation, for the list of contact arrangements
a
nd for alternate positions available, refer to
the table at the right.
Shell size No. of contacts Contact
arrangements
Degree of Rotation
V W X Y Z
8
2 8-2 – 58 122 – –
3 8-3 – 60 210 – –
3 8-3A – 60 – – –
3 8-33 – 90 – – –
4 8-4 – 45 – – –
10
6 10-6 – 90 – – –
7 10-7 – 90 – – –
6 10-98 – 90 180 240 270
12
3 12-3 – – – 180 –
8 12-8 – 90 112 203 292
10 12-10 – 60 155 270 295
14 12-14 – 60 155 270 295
14
4 14A4 – – – – –
5 14-5 – 40 92 184 273
12 14-12 – 43 90 – –
15 14-15 – 17 110 155 234
18 14-18 – 15 90 180 270
19 14-19 – 30 165 315 –
5 14-22 – – – – –
16
8 16-8 – 54 52 180 331
23 16-23 – 158 – – –
26 16-26 – 60 – 275 338
18
11 18-11 – 62 119 241 340
32 18-32 – 85 138 222 265
20
5 20A6* – 90 180 270 –
16 20-16 – 238 318 333 347
24 20-24 – 70 145 215 290
39 20-39 – 63 144 252 333
41 20-41 – 45 126 225 –
22
21 22-21 – 16 135 175 349
36 22-36 – 72 144 216 288
41 22-41 – 39 135 264 –
55 22-55 – 30 142 226 314
24 61 24-61 – 90 180 270 324
* This contact arrangement features five contacts size 12. Four standard contacts and one is a first-to-mate contact.
www.ittcannon.com
18
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Shell size Ø A
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
Ø T
±0,15
Ø DA
min.
LA
max.
VTHD
Thread Type 2A
812,00 1,9 11,6 15,1 21,0 3,05 8,5 38,0 1/2-28UNEF
10 15,00 1,9 11,6 18,3 24,2 3,05 11,8 38,0 5/8-24UNEF
12 19,05 1,9 11,6 20,6 26,6 3,05 15,0 38,0 3/4-20UNEF
14 22,23 1,9 11,6 23,0 29,0 3,05 17,9 38,0 7/8-20UNEF
16 25,40 1,9 11,6 24,6 31,3 3,05 21,1 38,0 1-20UNEF
18 28,58 1,9 11,6 27,0 33,7 3,05 24,1 38,0 1-3/16-18UNEF
20 31,75 2,2 14,25 29,4 36,9 3,05 26,5 43,1 1-3/16-18UNEF
22 34,93 2,2 14,25 31,8 40,1 3,05 30,4 43,1 1-7/16-18UNEF
24 38,10 2,2 15,1 34,9 43,3 3,75 32,8 43,1 1-7/16-18UNEF
WALL MOUNTING RECEPTACLES KPT00A / KPSE00A / KPTC0A
Description: Wall Mounting
Receptacle with an endbell with
thread, no grommet seal.
Shell size Ø A
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
Ø T
±0,15
Ø BE
max.
LE
max.
812,00 1,9 11,6 15,1 21,0 3,05 14,2 32,5
10 15,00 1,9 11,6 18,3 24,2 3,05 17,2 32,5
12 19,05 1,9 11,6 20,6 26,6 3,05 20,4 32,5
14 22,23 1,9 11,6 23,0 29,0 3,05 23,4 32,5
16 25,40 1,9 11,6 24,6 31,3 3,05 26,6 32,5
18 28,58 1,9 11,6 27,0 33,7 3,05 29,6 32,5
20 31,75 2,2 14,25 29,4 36,9 3,05 32,8 34,5
22 34,93 2,2 14,25 31,8 40,1 3,05 36,0 34,5
24 38,10 2,2 15,1 34,9 43,3 3,75 39,2 34,5
WALL MOUNTING RECEPTACLES KPT00E / KPSE00E (VG95328A) / KPTC0E
Description: Wall Mounting
Receptacle with pressure nut
and grommet seal.
www.ittcannon.com 19
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
Shell size Ø A
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
Ø T
±0,15
Ø GF
min.
HF
max.
LF
max.
812,00 1,9 11,6 15,1 21,0 3,05 2,9 19,3 56,0
10 15,00 1,9 11,6 18,3 24,2 3,05 4,5 20,8 56,0
12 19,05 1,9 11,6 20,6 26,6 3,05 7,7 24,4 56,0
14 22,23 1,9 11,6 23,0 29,0 3,05 9,3 27,2 56,0
16 25,40 1,9 11,6 24,6 31,3 3,05 12,4 28,7 56,0
18 28,58 1,9 11,6 27,0 33,7 3,05 15,6 35,3 56,0
20 31,75 2,2 14,25 29,4 36,9 3,05 15,6 35,3 61,0
22 34,93 2,2 14,25 31,8 40,1 3,05 18,8 39,9 61,0
24 38,10 2,2 15,1 34,9 43,3 3,75 20,1 43,2 61,0
WALL MOUNTING RECEPTACLES KPT00F / KPSE00F (VG95328B) / KPTC0F
Description: Wall Mounting
Receptacle with endbell, cable
clamp and grommet seal.
Shell size Ø A
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
Ø T
±0,15
Ø D2
–0,5
L1
max.
L2
±0,5
812,00 1,9 11,6 15,1 21,0 3,05 15,6 35,0 12,2
10 15,00 1,9 11,6 18,3 24,2 3,05 18,4 35,0 12,2
12 19,05 1,9 11,6 20,6 26.6 3,05 23,7 35,0 12,2
14 22,23 1,9 11,6 23,0 29,0 3,05 24,5 35,0 12,2
16 25,40 1,9 11,6 24,6 31,3 3,05 29,8 37,0 14,5
18 28,58 1,9 11,6 27,0 33,7 3,05 32,0 37,0 14,5
20 31,75 2,2 14,25 29,4 36,9 3,05 36,1 42,0 15,8
22 34,93 2,2 14,25 31,8 40,1 3,05 38,5 42,0 15,8
24 38,10 2,2 15,1 34,9 43,3 3,75 41,6 42,0 14,9
WALL MOUNTING RECEPTACLES KPT0E...DN / KPSE0E...DN / KPTC0E...DN
Description: Wall Mounting
Receptacle with endbell for heat
shrink boot and grommet seal.
www.ittcannon.com
20
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
WALL MOUNTING RECEPTACLES KPT0E...DZ / KPSE0E...DZ (VG95328R) / KPTC0E…DZ
Shell size Ø A
+0,03 – 0,13
Ø B
min.
Ø C
±0,5
Ø D
max.
E
±1,0
K
±0,1
L
max.
M
±0,15
R
±0,15
S
max.
Ø T
±0,15
812,00 6,6 16,0 13,3 15,0 1,9 52,0 11,6 15,1 21,0 3,05
10 15,00 9,2 18,0 16,1 15,0 1,9 52,0 11,6 18,3 24,2 3,05
12 19,05 12,2 22,0 20,0 17,0 1,9 52,0 11,6 20,6 26,6 3,05
14 22,23 15,2 25,0 22,2 18,0 1,9 53,0 11,6 23,0 29,0 3,05
16 25,40 18,3 28,0 26,2 18,0 1,9 53,0 11,6 24,6 31,3 3,05
18 28,58 20,0 32,0 28,5 18,0 1,9 53,0 11,6 27,0 33,7 3,05
20 31,75 23,0 34,0 32,5 18,0 2,2 58,0 14,25 29,4 36,9 3,05
22 34,93 26,0 38,0 34,8 18,0 2,2 58,0 14,25 31,7 40,1 3,05
24 38,10 28,8 41,0 37,9 18,0 2,2 58,0 15,1 34,9 43,3 3,75
Description: Wall Mounting Receptacle
with endbell for heat shrink boot and
grommet seal, shielded.