KPT/KPSE/KPTC Connectors In Accordance with VG95328 We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world's harshest environments. With facilities in the United States, Germany, Italy, Mexico, China and Japan, each with its unique strengths, we offer our customers interconnect solutions that are truly Engineered for Life. In addition to this truly global footprint, we offer highly specialized, segmented industry expertise. We have a proven track record as an industry leader in harsh-environment applications. This has equipped us with the knowledge needed to continue to produce the most resilient, reliable connectors for our customers' most challenging conditions. Interconnect solutions for the harshest environments. Key Features *Simple to install and maintain *Hand insertable contacts *No wedge locks or blind seals required The ITT Cannon difference *From 2 way to 24-way layouts *Global capabilities *Up to IP69K sealing& local support *Proven Trident application expertise *Utilizes Contacts *A century of interconnect leadershipkey *Positive locking latch & polarization *A committed innovator & business partner *Excellent cost/performance ratio About ITT ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Founded in 1920, ITT is headquartered in White Plains, N.Y., with employees in more than 35 countries and sales in a total of approximately 125 countries. For more information, visit www.itt.com. 2 www.ittcannon.com lndustrial/lnstrumentation Rail Defense Vehicles Oil&Gas Medical Commercial & Military Aerospace Our connector portfolio remains the most extensive Heavy Equipment in the industry, offering a reliable and cost effective range of interconnect solutions www.ittcannon.com 3 Introduction to KPSE/KPT/KPTC ITT Cannon's KPSE / KPT and KPTC series of miniature positive bayonet locking connectors offer a range of high-density signal solutions. They are designed according to MIL-DTL-26482 Series I or VG95328 - details below. Next to the original use in military vehicles these connector series have become a standard for Industrial uses as eg. off-road vehicles, sensors, factory equipment and other heavy industry applications. All three product lines have specific characteristics and provide a set of unique variants, however, all lines are fully intermateable with each other as well as any other connector series designed to MIL-DTL 26482 Series I or VG95238 standards. Product Series Origin VG 95328 Approved MIL-DTL 26482 Series I Approved KPSE German make/origin Yes No KPSE US make/origin No No KPT German make/origin No No KPT US make/origin No No KPTC German make/origin No No KPSE is the high-performance crimp contact solution featuring a clip-in retention system for fast and simple assembly. ITT Cannon is approved to offer this line with VG marking according to VG95328. Common features of KPSE / KPT / KPTC: Intermateability with all product lines designed to MIL-DTL-26482 Series I Environmental sealing to IP67 and IP68 1/2 turn positive bayonet coupling for quick mating & unmating Shielded backshell accessories A range of RoHS compliant plating alternatives to Cadmium including Nickel, Zinc Nickel and Zinc Cobalt versions Customizing options KPT is the first of two general duty series, and equipped with solder pot contacts and glued in contacts. This makes this product ideal for any prototype solution as well as for military vehicle applications based on the MIL-DTL-268482 Series I standard. KPTC is the second ITT Cannon general duty series with either crimp or solder pot contact versions. In comparison this series comes with a simpler design and avoids the high-performance clip-in solution of KPSE as well as the glued contact assembly of KPT which makes this line a good choice for many Industrial applications. Both KPTC as well as KPT add typical Industrial back shells to their portfolio. This document solely applies to European manufactured KPT / KPSE / KPTC products. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 4 www.ittcannon.com Contact Principle CONTACT & SEALING PRINCIPLE 1 KPSE uses a three piece insulator stack up consisting of 2 1 - rubber insulator 2 - plastic wafer / retaining clips 3 - ubber grommet to seal individual wires 4 - two piece machined contact with retaining clip 3 4 Rubber insulator (1) and grommet (3) together with the front sealing ring provide the sealing in mated condition as well as the sealing of individual wires protruding through the grommet. Contact retention is provided using a two piece contact with retaining clip. The stiff plastic wafer or individual metal clips provide the specified contact retention. A good tactile response is given when contacts are pushed in the final assembly position. Contacts are installed from the rear by hand or with an insertion tool to ease assembly. Contact removal is done with an extraction tool from the front. 1 KPT uses a rubber insulator and sealing grommet 2 3 1 - rubber insulator 2 - rubber grommet to seal individual wires 3 - one piece machined contact Rubber insulator (1) and grommet (2) together with the front sealing ring provide the sealing in mated condition as well as the sealing of individual wires protruding through the grommet. Contact retention is provided by form fit of the machined contact in the rubber insulator. Additionally, glue is applied to secure contacts in the exact mounting position. KPT is equipped with solder pot contacts only and pre installed by the factory. 1 KPTC uses a rubber insulator and sealing grommet 2 3 1 - rubber insulator 2 - rubber grommet to seal individual wires 3 - one piece machined contact Rubber insulator (1) and grommet (2) together with the front sealing ring provide the sealing in mated condition as well as the sealing of individual wires protruding through the grommet. Contact retention is provided by form fit of the machined contact in the rubber insulator. Solder pot contacts are pre-installed by the factory, crimp contacts are delivered separately. Glue is not applied to KPTC connectors. Contacts are installed from the rear with an insertion tool. Contact removal is done with an extraction tool from the front. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 5 Table of contents Contact and sealing principle ................................. 5 How to use this catalogue....................................... 7 Product overview.................................................... 8 Panel cutouts........................................................ 10 Ordering reference................................................ 11 Contact arrangements........................................... 14 Alternate insert positions....................................... 17 Wall mounting receptacles.................................... 18 Cable connecting plugs......................................... 21 Box mounting receptacles..................................... 23 Thru-bulkhead receptacles..................................... 24 Straight plugs....................................................... 24 Jam nut receptacles............................................... 28 Right angle plugs.................................................. 31 Receptacles with PCB solder pins........................... 32 Accessories and tooling Protective caps...................................................... 33 Dummy receptacle................................................ 35 Cross reference lists .............................................. 36 Tools and accessories ............................................ 37 Product safety information.................................... 40 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 6 www.ittcannon.com How to use This catalog is split in several sections that help you to * get a general overview of all product lines (product overview) * create a product part number step by step (ordering reference) * get all required detail information (dimensions, product details) * get all required support products (accessories, tooling) The fastest way to find your product of choice is to follow these steps 1 Select your product using the "ordering reference" option 3 Add accessories and tooling as required on the related pages 2 Use the detail pages to better understand the available options and choose the best solution for your needs 4 Use the contact information on the back cover to contact us for further questions or to get advice on where you can purchase our products Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 7 Product overview KPSE (VG95328), KPT, KPTC Electrical Data Contact rating at 60C: Size Rated current A Test current A Millivolt drop mV 20 7,5 7,5 Less than 50 16 13,0 13,0 Less than 50 Current Rating Current rating vs. ambient temperature: Current Rating 13 13 12 12 11 11 10 Rated current Rated current in Ain A 10 9 89 78 Limit of temperature Limit of #20 Contact temperature 67 56 Contact #16 #20 Contact 45 Contact #16 34 23 12 01 0 20 30 40 50 60 20 30 40 50 Ambient Temperature 60 70 80 in C 70 80 90 100 110 120 130 90 100 110 120 130 Ambient Temperature in C Comment for contact rating and current rating: Rated current values shown are the max. current flowing continuously (not intermittently) through one contact pair with the same cross section with regard to ambient temperature. If multiple contact pairs are loaded into a connector the current rating curve has to be reduced. Minimum air & creepage paths: Contact to contact crimp Contact to contact solder Contact to shell Service Class 1 1,9 mm 0,75 mm 1,0 mm Service Class 2 2,8 mm 1,53 mm 2,8 mm Insulation resistance: ~ 5000 MOhm Operating voltage: Service class VG95328 MIL-C-26482 1 140 VDC/100 VAC 850 VDC/600 VAC 2 165 VDC/115 VAC 1400 VDC/1000 VAC Comment: When connectors in this catalog are used at voltages exceeding > 50VAC / 75VDC safety provisions as defined in the European low voltage directive 2014/35/EU have to be adhered to. For use in other regions see appropriate local regulations. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 8 www.ittcannon.com Test voltage: Test voltage Service Class 1 21336 M/70,000ft. Service class Vrms VDC 1 1500 2100 2 2300 3200 1 375 535 2 550 770 Mechanical data Ambient temperature: -55C ... 125C Environmental sealing: In mated condition for KPSE, KPT and KPTC product lines: IP67 acc. ISO 20653 VG95328 connectors: IP68 (0,2bar / 48h) - see below According to VG95319 Part 2, Test No. 5.9.2 | For styles A to E and Z1, Z2 and Z3 and gaskets style A only, test pressure 0,2 bar overpressure, test duartion 48h, test temperature 253C, connector shall be free of moisture Vibration test acc. VG95328: Vibration stress 150 m/s2, 10 Hz to 2000 Hz and Random vibration stress, 5 Hz to 500 Hz acc. test 5.52 VG95328-1 Mating cycles: 500 Material: Shell Aluminium alloy Shell finishes - Cadmium, VG approved - ZnCobalt Black - Zinc Cobalt Green - Zinc Nickel Blue Generation, for non-shielded versions - Nickel Insulator Polychloroprene Grommet and seals Contacts Copper alloy, gold and silver plating Product line design principles: KPSE: Clip in crimp contact system, VG approved versions KPT: Solder contacts, pre-installed and fixed with glue, VG approved versions KPTC: Crimp contacts for tool insertion OR pre-installed solder contacts (not fixed with glue) All further details, product line options etc. see following catalog pages Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 9 PANEL CUTOUTS KPT/KPSE/KPTC BOX MOUNTING RECEPTACLE Shell size For rear mounting For front mounting O D +0,25/0 O D +0,25/0 R0,15 O T+0,3 8 14,0 12,7 15,1 3,1 10 17,0 16,0 18,3 3,1 12 22,0 19,0 20,6 3,1 14 25,0 22,2 23,0 3,1 16 28,0 25,5 24,6 3,1 18 31,0 28,5 27,0 3,1 20 34,5 31,7 29,4 3,1 22 37,5 35,0 31,8 3,1 24 41,0 38,0 34,9 3,6 PANEL THICKNESS Shell size P - Panel thickness Height of screw head included 8 2,2 10 2,2 12 2,2 14 2,2 16 2,2 18 2,2 20 5,4 22 5,4 24 5,4 JAM NUT RECEPTACLE Shell size KPT/KPSE O A +0,25/-0 KPT/KPSE B +0/-0,12 8 14,5 13,6 10 17,7 16,8 12 22,7 20,9 14 25,7 24,1 16 28,8 27,2 18 32,0 30,4 20 35,1 33,6 22 38,4 36,8 24 41,5 40,0 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 10 www.ittcannon.com How to order Cannon Order reference KPT/KPSE/KPTC KP.. 02 E 22-36 P W * Series KPSE - Cannon prefix crimp, contacts supplied KPT - Cannon prefix solder, contacts installed KPTC - Cannon prefix commercial version, contacts to be ordered separately. See modification codes for contact options Shell type (See note below) Cannon designation omit 0 in case of a mod code and KPTC 00 - wall mounting receptacle see page 18-20 01 - cable connecting plug see page 21-23 02 - box mounting receptacle (class E only). see page 23-24 06 - straight plug see page 24-27 07 - jam nut receptacle see page 28-30 08 - 90 angle plug see page 31 KPTB - thru-bulkhead receptacle see page 24 Class A - Endbell with thread, no grommet seal; for jam nut: without endbell E - Pressure nut and grommet seal - for 90 versions: endbell with thread, and grommet seal - with modification DN: Endbell for heat shrink boot and grommet seal - with modification DZ: Endbell for heat shrink boot and grommet seal, shielded F - Endbell with cable clamp and grommet seal PG - endbell for PG glands ME - endbell for metric glands Shell size 8 - 24 Contact arrangement see page 14-16 Contact type P - pin S - socket Alternate insert position W, X, Y and Z (omit for normal position) see page 17 Modification see page 12 Note: * If a modification is used the initial 0` in the shell style description is omitted e.g. KPT01E10-6P is changed to KPT1E10-6P-DN. KPTC series does not use the initial 0` e.g. KPTC6E10-6P-C. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 11 Modification Codes KPT: KPSE: Multiple codes can be used in order of listing below: Multiple codes can be used in order of listing below: Contact Endbell PCB solder pin 0,76 x 7mm (style 02 and 07 only) EX heat shrink boot adapter, grommet seal PCB solder pin 0,6 x 7mm (style 02 and 07 only) EW shielded, heat shrink boot adapter, grommet seal without endbell, grommet and ferrule DN DZ F42* shielded, heat shrink boot adapter, grommet seal DN Nickel plating (RoHS compliant) C DZ Zinc Cobalt black plating (RoHS compliant) R Zinc Cobalt green plating (RoHS compliant) F F42* Endbell for PG cable gland, class PG only PG09 thread for connectors with shell size 10 P9 PG11 thread for connectors with shell size 12 P11 PG13,5 thread for connectors with shell size 14 Endbell for PG cable gland, class PG only Multiple codes can be used in order of listing below: Plating without endbell, grommet and ferrule Endbell heat shrink boot adapter, grommet seal KPTC: P13,5 Zinc Nickel plating (RoHS compliant) H Cadmium with olive drab chromate D Endbell heat shrink boot adapter, grommet seal DN shielded, heat shrink boot adapter, grommet seal DZ PG09 thread for connectors with shell size 10 P9 PG16 thread for connectors with shell size 16 P16 without endbell, grommet and ferrule PG11 thread for connectors with shell size 12 P11 PG21 thread for connectors with shell size 18, 20, 22 P21 Endbell for PG cable gland, class PG only P13,5 PG29 thread for connectors with shell size 24 P29 PG09 thread for connectors with shell size 10 P9 Endbell for Metric cable gland, class ME only PG11 thread for connectors with shell size 12 P11 PG13,5 thread for connectors with shell size 14 F42* PG16 thread for connectors with shell size 16 P16 PG21 thread for connectors with shell size 18, 20, 22 P21 M12 thread for connectors with shell size 10 M12 PG13,5 thread for connectors with shell size 14 PG29 thread for connectors with shell size 24 P29 M16 thread for connectors with shell size 12 M16 PG16 thread for connectors with shell size 16 P16 M20 thread for connectors with shell size 16 M20 PG21 thread for connectors with shell size 18, 20, 22 P21 P29 Endbell for Metric cable gland, class ME only P13,5 M12 thread for connectors with shell size 10 M12 M25 thread for connectors with shell size 18, 20 M25 PG29 thread for connectors with shell size 24 M16 thread for connectors with shell size 12 M16 M32 thread for connectors with shell size 22, 24 M32 Endbell for Metric cable gland, class ME only M20 thread for connectors with shell size 16 M20 M25 thread for connectors with shell size 18, 20 M25 Plating (Cadmium with olive drab chromate plating is standard - without code; Alternative platings below) M32 thread for connectors with shell size 22, 24 M32 Zinc Cobalt, black plating (RoHS compliant) Plating (Cadmium with olive drab chromate plating is standard - without code; Alternative platings below) Zinc Cobalt, black plating (RoHS compliant) A232 Zinc Nickel plating (RoHS compliant) A240 Zinc Cobalt, green plating (RoHS compliant) A233 Nickel plating (RoHS compliant) A34 An example using these modifications: KPT2E10-6P-EW-A232 M12 thread for connectors with shell size 10 M12 M16 thread for connectors with shell size 12 M16 A232 M20 thread for connectors with shell size 16 M20 Zinc Nickel plating (RoHS compliant) A240 Zinc Cobalt, green plating (RoHS compliant) M25 thread for connectors with shell size 18, 20 M25 A233 Nickel plating (RoHS compliant) A34 M32 thread for connectors with shell size 22, 24 M32 Contact Contact Connector without contacts F0 An example using these modifications: KPSE7F16-8S-A240-F0 * Note: Modification -F42 can only be used with Styles 0, 1, 6, 7 and 8. See details on pg 13 * Note: Modification -F42 can only be used with Styles 0, 1, 6, 7 and 8. See details on pg 13 Connector supplied with solder pot contacts installed MA Connector supplied with crimp contacts MB PCB solder pin 0,76 x 7mm (style 02 and 07 only) EX PCB solder pin 0,6 x 7mm (style 02 and 07 only) EW An example using these modifications: KPTC6F14-18P-H-MB * Note: Modification -F42 can only be used with Styles 0, 1, 6, 7 and 8. See details on pg 13 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 12 www.ittcannon.com Endbell Modification -F42 Below table shows the different threads that come with the respective shell sizes when choosing the modification -F42 (no endbell/grommet seal). This modification is only applicable to styles 0 (wall mounting receptacle), 1 (cable connecting plug), 6 (straight plug), 7 (jam nut receptacle) and 8 (90 angle plug). The only exception being KP*7A, as this combination already has no endbell/grommet. Shell size Thread 8 7/16-28UNEF 10 9/16-24UNEF 12 11/16-24UNEF 14 13/16-20UNEF 16 15/16-20UNEF 18 1-1/16-18UNEF 20 1-3/16-18UNEF 22 1-5/16-18UNEF 24 1-7/16-18UNEF Drawing shows KP*1 Style How to order VG Order reference VG95328 Specification Shell type see page 36 A - wall mounting receptacle with straight endbell B - wall mounting receptacle with cable clamp C - box mounting receptacle D - jam nut receptacle E - jam nut receptacle with cable clamp J - straight plug with adapter DN K - straight plug with cable clamp M - straight plug, version DZ R - wall mounting receptacle, version DZ S - jam nut receptacle with adapter DN Shell size 8, 10, 12, 14, 16, 18, 20, 22 and 24 Contact arrangements see page 14-16 Contact type P - pin S - socket Alternate insert position see page 17 With / without contacts Without identification = with contacts With -1 identification = without contacts Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 13 A 18-1 S N -1 CONTACT ARRANGEMENTS View on mating face of pin insulator Contact arrangements Insulator position No. of contacts Contact size AWG Service rating 2 8-2 20 3 W X Y Z 1 58 122 - - 8-3 20 1 60 210 - - 3 8-3A 20 1 60 - - - 3 8-33 20 1 90 - - - 4 8-4 20 1 45 - - - 6 10-6 20 1 90 - - - 10-7 20 1 90 - - - 7 6 10-98 20 1 90 180 240 270 3 12-3 16 2 - - 180 - 8 12-8 20 1 90 112 203 292 10 12-10 20 1 60 155 270 295 14 12-14 20 1 60 155 270 295 5 14-5 16 2 40 92 184 273 12 14-12 20(8) 16(4) 1 43 90 - - Legend KPT KPSE KPTC authorized per VG95328 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 14 www.ittcannon.com CONTACT ARRANGEMENTS View on mating face of pin insulator Contact arrangements No. of contacts Contact size AWG Insulator position Service rating W X Y Z 15 14-15 20(14) 16(1) 1 17 110 155 234 18 14-18 20 1 15 90 180 270 19 14-19 20 1 30 165 315 - 5 14-22 12(4) 20(1) 1 - - - - 4 14A4 Coax RG188U 1 - - - - 8 16-8 16 2 54 152 180 331 23 16-23 20(22) 16(1) 1 158 - - - 26 16-26 20 1 60 - 275 338 11 18-11 16 2 62 119 241 340 32 18-32 20 2 85 138 222 265 (not for receptacle shell style 02) Legend KPT KPSE KPTC authorized per VG95328 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 15 CONTACT ARRANGEMENTS View on mating face of pin insulator Contact arrangements No. of contacts Contact size AWG Insulator position Service rating W X Y Z 20A6 12 2 90 180 270 - 16 20-16 16 2 238 318 333 347 24 20-24 20 1 70 145 215 290 39 20-39 20(37) 16(2) 1 63 144 252 333 41 20-41 20 1 45 126 225 w- 21 22-21 16 2 16 135 175 349 36 22-36 20 1 72 144 216 288 41 22-41 20(27) 16(14) 39 135 264 - 55 22-55 20 1 30 142 226 314 61 24-61 20 1 90 180 270 324 5 Note: contacts are 1 grounding pin and 4 standard size 12 pins 1 2 Legend KPT KPSE KPTC authorized per VG95328 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 16 www.ittcannon.com ALTERNATE INSERT POSITION The diagram indicates alternate insert positions. The six positions N, V, W, Y, Z differ in degree of rotation for various sizes and arrangements. For the exact degree of rotation, for the list of contact arrangements and for alternate positions available, refer to the table at the right. Shell size Degree of Rotation No. of contacts Contact arrangements V W X Y Z 2 8-2 - 58 122 - - 3 8-3 - 60 210 - - 3 8-3A - 60 - - - 3 8-33 - 90 - - - 4 8-4 - 45 - - - 6 10-6 - 90 - - - 7 10-7 - 90 - - - 6 10-98 - 90 180 240 270 3 12-3 - - - 180 - 8 12-8 - 90 112 203 292 10 12-10 - 60 155 270 295 14 12-14 - 60 155 270 295 4 14A4 - - - - - 5 14-5 - 40 92 184 273 12 14-12 - 43 90 - - 15 14-15 - 17 110 155 234 18 14-18 - 15 90 180 270 19 14-19 - 30 165 315 - 5 14-22 - - - - - 8 16-8 - 54 52 180 331 23 16-23 - 158 - - - 26 16-26 - 60 - 275 338 11 18-11 - 62 119 241 340 32 18-32 - 85 138 222 265 5 20A6* - 90 180 270 - 16 20-16 - 238 318 333 347 24 20-24 - 70 145 215 290 39 20-39 - 63 144 252 333 41 20-41 - 45 126 225 - 21 22-21 - 16 135 175 349 36 22-36 - 72 144 216 288 41 22-41 - 39 135 264 - 55 22-55 - 30 142 226 314 61 24-61 - 90 180 270 324 8 10 12 14 16 18 20 22 24 * This contact arrangement features five contacts size 12. Four standard contacts and one is a first-to-mate contact. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 17 WALL MOUNTING RECEPTACLES KPT00A / KPSE00A / KPTC0A Description: Wall Mounting Receptacle with an endbell with thread, no grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 R 0,15 S max. OT 0,15 O DA min. LA max. VTHD Thread Type 2A 8 12,00 1,9 11,6 15,1 21,0 3,05 8,5 38,0 1/2-28UNEF 10 15,00 1,9 11,6 18,3 24,2 3,05 11,8 38,0 5/8-24UNEF 12 19,05 1,9 11,6 20,6 26,6 3,05 15,0 38,0 3/4-20UNEF 14 22,23 1,9 11,6 23,0 29,0 3,05 17,9 38,0 7/8-20UNEF 16 25,40 1,9 11,6 24,6 31,3 3,05 21,1 38,0 1-20UNEF 18 28,58 1,9 11,6 27,0 33,7 3,05 24,1 38,0 1-3/16-18UNEF 20 31,75 2,2 14,25 29,4 36,9 3,05 26,5 43,1 1-3/16-18UNEF 22 34,93 2,2 14,25 31,8 40,1 3,05 30,4 43,1 1-7/16-18UNEF 24 38,10 2,2 15,1 34,9 43,3 3,75 32,8 43,1 1-7/16-18UNEF WALL MOUNTING RECEPTACLES KPT00E / KPSE00E (VG95328A) / KPTC0E Description: Wall Mounting Receptacle with pressure nut and grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 R 0,15 S max. OT 0,15 O BE max. LE max. 8 12,00 1,9 11,6 15,1 21,0 3,05 14,2 32,5 10 15,00 1,9 11,6 18,3 24,2 3,05 17,2 32,5 12 19,05 1,9 11,6 20,6 26,6 3,05 20,4 32,5 14 22,23 1,9 11,6 23,0 29,0 3,05 23,4 32,5 16 25,40 1,9 11,6 24,6 31,3 3,05 26,6 32,5 18 28,58 1,9 11,6 27,0 33,7 3,05 29,6 32,5 20 31,75 2,2 14,25 29,4 36,9 3,05 32,8 34,5 22 34,93 2,2 14,25 31,8 40,1 3,05 36,0 34,5 24 38,10 2,2 15,1 34,9 43,3 3,75 39,2 34,5 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 18 www.ittcannon.com WALL MOUNTING RECEPTACLES KPT00F / KPSE00F (VG95328B) / KPTC0F Description: Wall Mounting Receptacle with endbell, cable clamp and grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 R 0,15 S max. OT 0,15 O GF min. HF max. LF max. 8 12,00 1,9 11,6 15,1 21,0 3,05 2,9 19,3 56,0 10 15,00 1,9 11,6 18,3 24,2 3,05 4,5 20,8 56,0 12 19,05 1,9 11,6 20,6 26,6 3,05 7,7 24,4 56,0 14 22,23 1,9 11,6 23,0 29,0 3,05 9,3 27,2 56,0 16 25,40 1,9 11,6 24,6 31,3 3,05 12,4 28,7 56,0 18 28,58 1,9 11,6 27,0 33,7 3,05 15,6 35,3 56,0 20 31,75 2,2 14,25 29,4 36,9 3,05 15,6 35,3 61,0 22 34,93 2,2 14,25 31,8 40,1 3,05 18,8 39,9 61,0 24 38,10 2,2 15,1 34,9 43,3 3,75 20,1 43,2 61,0 WALL MOUNTING RECEPTACLES KPT0E...DN / KPSE0E...DN / KPTC0E...DN Description: Wall Mounting Receptacle with endbell for heat shrink boot and grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 R 0,15 S max. OT 0,15 O D2 -0,5 L1 max. L2 0,5 8 12,00 1,9 11,6 15,1 21,0 3,05 15,6 35,0 12,2 10 15,00 1,9 11,6 18,3 24,2 3,05 18,4 35,0 12,2 12 19,05 1,9 11,6 20,6 26.6 3,05 23,7 35,0 12,2 14 22,23 1,9 11,6 23,0 29,0 3,05 24,5 35,0 12,2 16 25,40 1,9 11,6 24,6 31,3 3,05 29,8 37,0 14,5 18 28,58 1,9 11,6 27,0 33,7 3,05 32,0 37,0 14,5 20 31,75 2,2 14,25 29,4 36,9 3,05 36,1 42,0 15,8 22 34,93 2,2 14,25 31,8 40,1 3,05 38,5 42,0 15,8 24 38,10 2,2 15,1 34,9 43,3 3,75 41,6 42,0 14,9 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 19 WALL MOUNTING RECEPTACLES KPT0E...DZ / KPSE0E...DZ (VG95328R) / KPTC0E...DZ Description: Wall Mounting Receptacle with endbell for heat shrink boot and grommet seal, shielded. Shell size OA +0,03-0,13 OB min. OC 0,5 OD max. E 1,0 K 0,1 L max. M 0,15 R 0,15 S max. OT 0,15 8 12,00 6,6 16,0 13,3 15,0 1,9 52,0 11,6 15,1 21,0 3,05 10 15,00 9,2 18,0 16,1 15,0 1,9 52,0 11,6 18,3 24,2 3,05 12 19,05 12,2 22,0 20,0 17,0 1,9 52,0 11,6 20,6 26,6 3,05 14 22,23 15,2 25,0 22,2 18,0 1,9 53,0 11,6 23,0 29,0 3,05 16 25,40 18,3 28,0 26,2 18,0 1,9 53,0 11,6 24,6 31,3 3,05 18 28,58 20,0 32,0 28,5 18,0 1,9 53,0 11,6 27,0 33,7 3,05 20 31,75 23,0 34,0 32,5 18,0 2,2 58,0 14,25 29,4 36,9 3,05 22 34,93 26,0 38,0 34,8 18,0 2,2 58,0 14,25 31,7 40,1 3,05 24 38,10 28,8 41,0 37,9 18,0 2,2 58,0 15,1 34,9 43,3 3,75 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 20 www.ittcannon.com CABLE CONNECTING PLUGS KPT01A / KPSE01A / KPTC1A Description: Cable connecting plug with an endbell with thread, no grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 S max. OY 0,15 O DA min. LA max. VTHD Thread Type 2A 8 12,00 1,9 11,6 20,6 23,8 8,5 38,0 1/2-28UNEF 10 15,00 1,9 11,6 23,8 26,9 11,8 38,0 5/8-24UNEF 12 19,05 1,9 11,6 26,15 29,3 15,0 38,0 3/4-20UNEF 14 22,23 1,9 11,6 28,5 31,7 17,9 38,0 7/8-20UNEF 16 25,40 1,9 11,6 30,7 34,1 21,1 38,0 1-20UNEF 18 28,58 1,9 11,6 33,3 36,5 24,1 38,0 1-3/16-18UNEF 20 31,75 2,2 14,25 36,5 39,6 26,5 43,1 1-3/16-18UNEF 22 34,93 2,2 14,25 39,5 42,8 30,4 43,1 1-7/16-18UNEF 24 38,10 2,2 15,1 42,8 46,0 32,8 43,1 1-7/16-18UNEF CABLE CONNECTING PLUGS KPT01E / KPSE01E / KPTC1E Description: Cable connecting plug with pressure nut and grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 S max. OY 0,15 O BE max. LE max. 8 12,00 1,9 11,6 20,6 23,8 14,2 32,5 10 15,00 1,9 11,6 23,8 26,9 17,2 32,5 12 19,05 1,9 11,6 26,15 29,3 20,4 32,5 14 22,23 1,9 11,6 28,5 31,7 23,4 32,5 16 25,40 1,9 11,6 30,7 34,1 26,6 32,5 18 28,58 1,9 11,6 33,3 36,5 29,6 32,5 20 31,75 2,2 14,25 36,5 39,6 32,8 34,5 22 34,93 2,2 14,25 39,5 42,8 36,0 34,5 24 38,10 2,2 15,1 42,8 46,0 39,2 34,5 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 21 CABLE CONNECTING PLUGS KPT01F / KPSE01F / KPTC1F Description: Cable connecting plug with endbell, cable clamp and grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 S max. OY 0,15 O GF min. HF max. LF max. 8 12,00 1,9 11,6 20,6 23,8 2,9 19,3 56,0 10 15,00 1,9 11,6 23,8 26,9 4,5 20,8 56,0 12 19,05 1,9 11,6 26,15 29,3 7,7 24,4 56,0 14 22,23 1,9 11,6 28,5 31,7 9,3 27,2 56,0 16 25,40 1,9 11,6 30,7 34,1 12,4 28,7 56,0 18 28,58 1,9 11,6 33,3 36,5 15,6 35,3 56,0 20 31,75 2,2 14,25 36,5 39,6 15,6 35,3 61,0 22 34,93 2,2 14,25 39,5 42,8 18,8 39,9 61,0 24 38,10 2,2 15,1 42,8 46,0 20,1 43,2 61,0 CABLE CONNECTING PLUGS KPT1E...DN / KPSE1E...DN / KPTC1E...DN Description: Cable connecting plug with endbell for heat shrink boot and grommet seal. Shell size OA +0,03 - 0,13 K 0,1 M 0,15 S max. OY 0,15 O D2 -0,5 L1 max. L2 0,5 8 12,00 1,9 11,6 20,6 23,8 15,6 35,0 12,2 10 15,00 1,9 11,6 23,8 26,9 18,4 35,0 12,2 12 19,05 1,9 11,6 26,15 29,3 23,7 35,0 12,2 14 22,23 1,9 11,6 28,5 31,7 24,5 35,0 12,2 16 25,40 1,9 11,6 30,7 34,1 29,8 37,0 14,5 18 28,58 1,9 11,6 33,3 36,5 32,0 37,0 14,5 20 31,75 2,2 14,25 36,5 39,6 36,1 42,0 15,8 22 34,93 2,2 14,25 39,5 42,8 38,5 42,0 15,8 24 38,10 2,2 15,1 42,8 46,0 41,6 42,0 14,9 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 22 www.ittcannon.com CABLE CONNECTING PLUGS KPT1E...DZ / KPSE1E...DZ / KPTC1E...DZ Description: Cable connecting plug with endbell for heat shrink boot and grommet seal, shielded. Shell size OA +0,03-0,13 M 0,15 OB min. OC 0,5 OD max. E 1,0 K 0,1 L max. S max. OY max. 8 12,00 11,6 6,6 16,0 13,3 15,0 1,9 52,0 18,5 21,0 10 15,00 11,6 9,2 18,0 16,1 15,0 1,9 52,0 23,0 24,2 12 19,05 11,6 12,2 22,0 20,0 17,0 1,9 52,0 29,0 26,6 14 22,23 11,6 15,2 25,0 22,2 18,0 1,9 53,0 29,5 29,0 16 25,40 11,6 18,3 28,0 26,2 18,0 1,9 53,0 32,0 31,3 18 28,58 11,6 20,0 32,0 28,5 18,0 1,9 53,0 35,0 33,7 20 31,75 14,25 23,0 34,0 32,5 18,0 2,2 58,0 38,5 36,9 22 34,93 14,25 26,0 38,0 34,8 18,0 2,2 58,0 42,0 40,1 24 38,10 14,25 28,8 41,0 37,9 18,0 2,2 58,0 46,0 43,3 BOX MOUNTING RECEPTACLES KPT02E (VG95328H) / KPSE02E (VG95328C) / KPTC2E Description: box mounting receptacle with through holes in flange. KPT/KPSE/KPTC KPT/KPTC Shell size OA +0,03-0,13 L max. ON max. K 0,1 M 0,15 R 0,15 S max. OT 0,15 Z max. 8 12,00 21,1 11,1 1,9 11,6 15,1 21,0 3,05 12,3 10 15,00 21,1 14,3 1,9 11,6 18,3 24,2 3,05 12,3 12 19,05 21,1 17,5 1,9 11,6 20,6 26,6 3,05 12,3 14 22,23 21,1 20,6 1,9 11,6 23,0 29,0 3,05 12,3 16 25,40 21,1 23,8 1,9 11,6 24,6 31,3 3,05 12,3 18 28,58 21,1 27,0 1,9 11,6 27,0 33,7 3,05 12,3 20 31,75 22,7 30,2 2,2 14,25 29,4 36,9 3,05 10,8 22 34,93 22,7 33,4 2,2 14,25 31,8 40,1 3,05 10,8 24 38,10 22,7 36,5 2,2 15,1 34,9 43,3 3,75 10,0 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 23 THRU-BULKHEAD RECEPTACLES KPTB (VG95328P) Description: Bulkhead receptacle with mounting flange - with through holes. Socket on this side Pin on this side INSERT:For example: KPTB14-19PS Shell size OA +0,03 - 0,13 K 0,1 L max M 0,25 T max R 0,15 S max. OX 0,5 8 12,00 1,8 28,6 14,5 6,0 15,1 21,0 3,05 10 15,00 1,8 28,6 14,5 6,0 18,3 24,2 3,05 12 19,05 1,8 28,6 14,5 6,0 20,6 26,6 3,05 14 22,23 1,8 28,6 14,5 6,0 23,0 29,0 3,05 16 25,40 1,8 28,6 14,5 6,0 24,6 31,3 3,05 18 28,58 1,8 28,6 14,5 6,0 27,0 33,7 3,05 20 31,75 2,5 31,9 17,7 9,2 29,4 36,9 3,05 22 34,93 2,5 31,9 17,7 9,2 31,8 40,1 3,05 24 38,10 2,5 31,9 17,7 8,0 34,9 43,3 3,75 STRAIGHT PLUGS KPT06A / KPSE06A / KPTC6A Description: Straight plug with an endbell with thread, no grommet seal. Shell size OG max. O DA min. LA max. VTHD Thread Type 2A 8 19,8 8,5 42,0 1/2-28UNEF 10 23,6 11,8 42,0 5/8-24UNEF 12 26,5 15,0 42,0 3/4-20UNEF 14 30,1 17,9 42,0 7/8-20UNEF 16 33,2 21,1 42,0 1-20UNEF 18 35,4 24,1 42,0 1-3/16-18UNEF 20 39,0 26,5 45,0 1-3/16-18UNEF 22 42,1 30,4 45,0 1-7/16-18UNEF 24 45,2 32,8 45,0 1-7/16-18UNEF Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 24 www.ittcannon.com STRAIGHT PLUGS KPT06E / KPSE06E / KPTC6E Description: Straight plug with pressure nut and grommet seal. OG max. Shell size O BE max. LE max. 8 19,8 14,2 32,5 10 23,6 17,2 32,5 12 26,5 20,4 32,5 14 30,1 23,4 32,5 16 33,2 26,6 32,5 18 35,4 29,6 32,5 20 39,0 32,8 34,5 22 42,1 36,0 34,5 24 45,2 39,2 34,5 STRAIGHT PLUGS KPT06F / KPSE06F (VG95328K) / KPTC6F Description: Straight plug with endbell, cable clamp and grommet seal. Shell size OG max. O GF min. HF max. LF max. 8 19,8 2,9 19,3 56,0 10 23,6 4,5 20,8 56,0 12 26,5 7,7 24,4 56,0 14 30,1 9,3 27,2 56,0 16 33,2 12,4 28,7 59,0 18 35,4 15,6 35,3 59,0 20 39,0 15,6 35,3 59,0 22 42,1 18,8 39,9 59,0 24 45,2 20,1 43,2 59,0 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 25 STRAIGHT PLUGS KPT6E...DN / KPSE6E...DN(VG95328J) / KPTC6E...DN Description: Straight plug with endbell for heat shrink boot and grommet seal. OG max. Shell size O D2 -0,5 L1 max. L2 0,5 8 19,8 15,6 35,0 12,2 10 23,6 18,4 35,0 12,2 12 26,5 23,7 35,0 12,2 14 30,1 24,5 35,0 12,2 16 33,2 29,8 37,0 14,5 18 35,4 32,0 37,0 14,5 20 39,0 36,1 42,0 15,8 22 42,1 38,5 42,0 15,8 24 45,2 41,6 42,0 14,9 STRAIGHT PLUGS KPT6E...DZ / KPSE6E...DZ (VG95328M) / KPTC6E...DZ Description: Straight plug with endbell for heat shrink boot and grommet seal, shielded. Shell size OB min. OC +0,5 OG max. OD max. E 1,0 L max. S +0,2 8 6,6 16,0 19,1 13,3 15,0 48,0 17,00 10 9,2 18,0 22,0 16,1 15,0 48,0 19,00 12 12,2 22,0 26,2 20,0 17,0 48,0 23,00 14 15,2 25,0 29,4 22,2 18,0 49,0 26,00 16 18,3 28,0 32,8 26,2 18,0 49,0 29,00 18 20,0 32,0 35,4 28,5 18,0 49,0 33,00 20 23,0 34,0 39,0 32,5 18,0 53,0 35,00 22 26,0 38,0 42,1 34,8 18,0 53,0 39,00 24 28,8 41,0 45,2 37,9 18,0 53,0 42,00 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 26 www.ittcannon.com STRAIGHT PLUG KPT6PG/KPTC6PG Description: Straight plug with adapter for PG gland nut. Gland nut is not included. Shell size OG max. OB max. C min. LPG max. PGTHD 10 23,6 19,0 10,5 58,5 PG09 12 26,5 22,5 10,5 58,5 PG11 14 30,1 25,0 10,5 58,5 PG13,5 16 33,2 28,0 10,5 73,0 PG16 18 35,4 32,5 11,5 73,0 PG21 20 39,0 34,5 11,5 76,0 PG21 22 42,1 38,0 11,5 82,0 PG21 24 45,2 40,5 11,5 82,0 PG29 OB max. C min. LME max. Metric Thread STRAIGHT PLUG KPT6ME/KPTC6ME Description: Straight plug with adapter for ME gland nut. Gland nut is not included. Shell size OG max. 10 23,6 19,0 10,5 58,5 M12x1,5 12 26,5 22,5 10,5 58,5 M16x1,5 14 30,1 25,0 10,5 58,5 M20x1,5 16 33,2 28,0 10,5 73,0 M20 x 1,5 18 35,4 32,5 11,5 73,0 M25x1,5 20 39,0 34,5 11,5 76,0 M25x1,5 22 42,1 38,0 11,5 82,0 M32x1,5 24 45,2 40,5 11,5 82,0 M32x1,5 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 27 JAM NUT RECEPTACLES KPT07A / KPTC7A Description: Jam nut receptacle without endbell. Shell size OA +0,03 - 0,13 F 0,15 H 0,15 K 0,25 M 0,15 T Panel Thickness RTHD Thread Type 2A S max. min. max. ON max. Z max. 8 12,00 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 7,9 10 15,00 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 7,9 12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 7,9 14 22,23 23,8 30,2 3,2 17,7 1-20UNEF 35,0 1,6 3,5 39,0 7,9 16 25,40 26,9 33,3 3,2 17,7 1-1/8-18UNEF 38,5 1,6 3,5 42,0 7,9 18 28,58 30,1 36,5 3,2 17,7 1-1/4-18UNEF 41,5 1,6 3,5 45,0 7,9 20 31,75 33,3 39,7 4,0 22,5 1-3/8-18UNEF 46,0 1,6 6,5 50,0 4,7 22 34,93 36,5 42,9 4,0 22,5 1-1/2-18UNEF 49,5 1,6 6,5 55,0 4,7 24 38,10 39,6 46,0 4,0 23,3 1-5/8-18UNEF 52,5 1,6 6,5 57,0 3,8 JAM NUT RECEPTACLES KPT07E / KPSE07E (VG95328D) / KPTC7E Description: Jam nut receptacle with pressure nut and grommet seal. Shell size OA +0,03 - 0,13 F 0,15 H 0,15 K 0,25 M 0,15 RTHD Thread Type 2A S max. T Panel Thickness min. max. ON max. O BE max. LE max. 8 12,00 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 18,2 33,5 10 15,00 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 21,5 33,5 12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 24,6 33,5 14 22,23 23,8 30,2 3,2 17,7 1-20UNEF 35.0 1,6 3,5 39,0 27,8 33,5 16 25,40 26,9 33,3 3,2 17,7 1-1/8-18UNEF 38,5 1,6 3,5 42,0 31,0 33,5 18 28,58 30,1 36,5 3,2 17,7 1-1/4-18UNEF 41,5 1,6 3,5 45,0 34,1 33,5 20 31,75 33,3 39,7 4,0 22,5 1-3/8-18UNEF 46,0 1,6 6,5 50,0 38,1 39,0 22 34,93 36,5 42,9 4,0 22,5 1-1/2-18UNEF 49,5 1,6 6,5 55,0 41,3 39,0 24 38,10 39,6 46,0 4,0 23,3 1-5/8-18UNEF 52,5 1,6 6,5 57,0 44,5 39,0 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 28 www.ittcannon.com JAM NUT RECEPTACLES KPT07F / KPSE07F (VG95328E) / KPTC7F Description: Jam nut receptacle with endbell, cable clamp and grommet seal. Shell size OA +0,03 - 0,13 F 0,15 H 0,15 K 0,25 M 0,15 RTHD Thread Type 2A S max. T Panel Thickness min. max. ON max. LF max. O GF max. HF max. 8 12,00 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 44,9 2,9 19,3 10 15,00 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 44,9 4,5 20,8 12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 44,9 7,7 24,4 14 22,23 23,8 30,2 3,2 17,7 1-20UNEF 35,0 1,6 3,5 39,0 44,9 9,3 27,2 16 25,40 26,9 33,3 3,2 17,7 1-1/8-18UNEF 38,5 1,6 3,5 42,0 48,4 12,4 28,7 18 28,58 30,1 36,5 3,2 17,7 1-1/4-18UNEF 41,5 1,6 3,5 45,0 48,4 15,6 35,3 20 31,75 33,3 39,7 4,0 22,5 1-3/8-18UNEF 46,0 1,6 6,5 50,0 50,3 15,6 35,3 22 34,93 36,5 42,9 4,0 22,5 1-1/2-18UNEF 49,5 1,6 6,5 55,0 50,3 18,8 39,9 24 38,10 39,6 46,0 4,0 23,3 1-5/8-18UNEF 52,5 1,6 6,5 57,0 50,3 20,1 43,2 T Panel Thickness ON max. L1 max. L2 0,15 O D2 max. JAM NUT RECEPTACLES KPT7E...DN / KPSE7E...DN (VG95328S) / KPTC7E...DN Description: Jam nut receptacle with endbell for heat shrink boot and grommet seal. Shell size OA +0,03 - 0,13 F 0,15 H 0,15 K 0,25 M 0,15 RTHD Thread Type 2A S max. min. max. 8 12,00 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 43,0 12,2 15,6 10 15,00 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 43,0 12,2 18,4 12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 43,0 12,2 23,7 14 22,23 23,8 30,2 3,2 17,7 1-20UNEF 35,0 1,6 3,5 39,0 43,0 12,2 24,5 16 25,40 26,9 33,3 3,2 17,7 1-1/8-18UNEF 38,5 1,6 3,5 42,0 45,5 14,5 29,8 18 28,58 30,1 36,5 3,2 17,7 1-1/4-18UNEF 41,5 1,6 3,5 45,0 45,5 14,5 32,0 20 31,75 33,3 39,7 4,0 22,5 1-3/8-18UNEF 46,0 1,6 6,5 50,0 52,6 15,8 36,1 22 34,93 36,5 42,9 4,0 22,5 1-1/2-18UNEF 49,5 1,6 6,5 55,0 52,6 15,8 38,5 24 38,10 39,6 46,0 4,0 23,3 1-5/8-18UNEF 52,5 1,6 6,5 57,0 51,6 14,9 41,6 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 29 JAM NUT RECEPTACLES KPT7E...DZ / KPSE7E...DZ / KPTC7E...DZ Description: Jam nut receptacle with endbell for heat shrink boot and grommet seal, shielded. Shell size OA min. OB +0,5 OC max. OD max. E 1,0 L max. S 0,25 T 0,25 8 6,6 16,0 18,2 13,3 15,0 47,0 23,0 19,0 10 9,2 18,0 21,4 16,1 15,0 47,0 27,0 22,2 12 12,2 22,0 24,6 20,0 17,0 49,0 31,7 27,0 14 15,2 25,0 27,8 22,2 18,0 50,0 34,9 30,2 16 18,3 28,0 30,9 26,2 18,0 50,0 38,1 33,3 18 20,0 32,0 34,1 28,5 18,0 50,0 41,3 36,5 20 23,0 34,0 38,1 32,5 18,0 55,0 46,0 39,7 22 26,0 38,0 41,3 34,8 18,0 55,0 49,2 42,9 24 28,8 41,0 44,4 37,9 18,0 55,0 52,3 46,0 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 30 www.ittcannon.com RIGHT ANGLE PLUG KPT08A/KPSE08A/KPTC8A Description: Plug with 90 endbell without cable clamp, no grommet seal. Shell size OG max. LA max. DA max. VTHD Thread Type 2A 8 19,8 36,1 20,9 1/2-28UNEF 10 23,6 38,3 21,7 5/8-24UNEF 12 26,5 40,9 23,3 3/4-20UNEF 14 30,1 41,6 24,9 7/8-20UNEF 16 33,2 42,5 26,5 1-20UNEF 18 35,4 44,7 28,1 1-3/16-18UNEF 20 39,0 48,3 29,6 1-3/16-18UNEF 22 42,1 52,1 31,7 1-7/16-18UNEF 24 45,2 52,1 33,6 1-7/16-18UNEF RIGHT ANGLE PLUG KPT08E / KPSE08E / KPTC8E Description: Plug with 90 endbell without cable clamp, with grommet seal. Shell size OG max. LE max. DE max. VTHD Thread Type 2A 8 19,8 36,1 20,9 1/2-28UNEF 10 23,6 38,3 21,7 5/8-24UNEF 12 26,5 40,9 23,3 3/4-20UNEF 14 30,1 41,6 24,9 7/8-20UNEF 16 33,2 42,5 26,5 1-20UNEF 18 35,4 44,7 28,1 1-3/16-18UNEF 20 39,0 48,3 29,6 1-3/16-18UNEF 22 42,1 52,1 31,7 1-7/16-18UNEF 24 45,2 52,1 33,6 1-7/16-18UNEF RIGHT ANGLE PLUG KPT08F / KPSE08F / KPTC8F Description: Plug with 90 endbell with cable clamp and grommet seal. Shell size OG max. L max. DF max. LF max. 8 19,8 47,0 31,4 36,1 10 23,6 49,5 32,2 38,3 12 26,5 53,5 35,4 40,9 14 30,1 55,5 38,6 41,6 16 33,2 57,0 40,2 42,5 18 35,4 62,5 41,8 44,7 20 39,0 67,0 43,4 48,3 22 42,1 71,5 47,9 52,1 24 45,2 74,0 49,9 52,1 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 31 BOX MOUNTING RECEPTACLE KPT2/KPTC2...EX OR EW Description: Box mounting receptacle with PCB solder pins: EX - PCB solder pin 0,76 x 7mm EW - PCB solder pin 0,6 x 7mm Shell size OA +0,03-0,13 K 0,1 L max. M 0,15 ON max. R 0,15 S max. OT 0,15 8 12,00 1,9 21,1 11,60 11,1 15,1 21,0 3,05 10 15,00 1,9 21,1 11,60 14,3 18,3 24,2 3,05 12 19,05 1,9 21,1 11,60 17,5 20,6 26,6 3,05 14 22,23 1,9 21,1 11,60 20,6 23,0 29,0 3,05 16 25,40 1,9 21,1 11,60 23,8 24,6 31,3 3,05 18 28,58 1,9 21,1 11,60 27,0 27,0 33,7 3,05 20 31,75 2,2 22,7 14,25 30,2 29,4 36,9 3,05 22 34,93 2,2 22,7 14,25 33,4 31,7 40,1 3,05 24 38,10 2,2 22,7 15,10 36,5 34,9 43,3 3,75 JAM NUT RECEPTACLES KPT7/KPTC7...EX OR EW Description: Jam nut receptacle with PCB solder pins: EX - PCB solder pin 0,76 x 7mm EW - PCB solder pin 0,6 x 7mm Shell size OA +0,03-0,13 F 0,15 H 0,15 K 0,25 M 0,15 RTHD Thread Type 2A S 0,5 T (Panel Thickness) min. max. ON max. 8 12,0 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 10 15,0 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 12 19,1 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 14 22,2 23,8 30,2 3,2 17,7 1-20UNEF 35,0 1,6 3,5 39,0 16 25,4 26,9 33,3 3,2 17,7 1-1/8-18UNEF 38,5 1,6 3,5 42,0 18 28,6 30,1 36,5 3,2 17,7 1-1/4-18UNEF 41,5 1,6 3,5 45,0 20 31,8 33,3 39,7 4,0 22,5 1-3/8-18UNEF 46,0 1,6 6,5 50,0 22 34,9 36,5 42,9 4,0 22,5 1-1/2-18UNEF 49,5 1,6 6,5 55,0 24 38,1 39,6 46,0 4,0 23,3 1-5/8-18UNEF 52,5 1,6 6,5 57,0 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 32 www.ittcannon.com PROTECTIVE CAPS KPT/KPSE/KPTC HOW TO ORDER KPT80- 10 D- A34 KPTC80- Series Series KPT80 - for plug KPTC80 - for plug KPT81 - for receptacle KPTC81 - for receptacle Shell size Shell size 8-24 8-24 Termination Termination D - Nylon cord 400 mm C - Nylon cord and endlink Clip and end link attached (not assembled) N - Nylon cord with ring (KPTC81 only) Crimp tool for end link: M317 (selector position 6) C - sash chain and terminal link Modification CB - Nylon cord and terminal link C - Nickel plated (RoHS compliant) N - chain with ring (KPT81 only) D - Cadmium plated NB - Nylon cord with ring (KPT81 only) R - Zinc cobalt, black (RoHS compliant) F - Zinc cobalt, green (RoHS compliant) Modification H - Zinc nickel plating (RoHS compliant) A34 - Nickel plated (RoHS compliant) A232 - Zinc cobalt, black (RoHS compliant) A233 - Zinc cobalt, green (RoHS compliant) A240 - Zinc nickel plating (RoHS compliant) VG95328 Z2 (without code) - Olive drab chromate over cadmium VG Specification Style Z1 - for receptacle Z2 - for plug Z3 - for jam nut receptacle Termination A - chain and terminal link B - for Z1 and Z2: Nylon cord and terminal link C - for Z1 and Z2: Nylon cord 400 mm and end link Clip and end link attached (not mounted) Crimp tool for end link: M317 (selector position 6) C - for Z3: Nylon cord with ring Shell size 8-24 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 33 C 10 10 C- C PROTECTIVE CAPS KPT/KPSE/KPTC Cap with end link (not assembled) For receptacle KPT81 termination D VG95328 Z1 termination C For plug KPT80 termination D VG95328 Z2 termination C Cap with terminal link For receptacle KPT81 termination C (with chain) and CB (with nylon cord) VG95328 Z1 termination A (with chain) For plug KPT80 termination C (with chain) and CB (with nylon cord) VG95328 Z2 termination A (with chain) Cap with ring For receptacle KPT81 termination N (with chain) and NB (with nylon chord) VG95328 Z3 termination C (with nylon cord) Shell size OA max. L1 max. OB max. L2 max. H max. ON 0,5 8 18,26 19,84 18,0 21,44 76 14,7 10 21,44 19,84 20,3 21,44 76 17,9 12 25,40 19,84 25,1 21,44 89 22,6 14 28,58 19,84 28,2 21,44 89 25,8 16 31,75 19,84 31,5 21,44 89 29,0 18 34,92 19,84 34,5 21,44 89 32,2 20 38,10 21,44 37,8 21,44 101 35,3 22 41,28 21,44 40,9 21,44 101 38,5 24 44,45 22,22 44,2 22,22 101 41,7 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 34 www.ittcannon.com DUMMY RECEPTACLES KPT/KPSE/KPTC HOW TO ORDER Below the order reference for Dummy Receptacles KPT series (can be mated with KPSE or KPTC connectors) and separately for VG95328. The table contains the available shell sizes with their respective dimensions. KPT 15- 8 A VG95328 Series Series Dummy receptacle Dummy receptacle Shell size Style (back side closed) Flange Shell size T07 C 8 A - Standard Shell size OA +0,03-0,13 K 0,4 M 0,15 R 0,15 S max. OT 0,15 KPT-15-8A 12,00 1,6 12,1 15,1 21,0 3,05 KPT-15-10A 15,00 1,6 12,1 18,3 24,2 3,05 KPT-15-12A 19,05 1,6 12,1 20,6 26,6 3,05 KPT-15-14A 22,23 1,6 12,1 23,0 29,0 3,05 KPT-15-16A 25,40 1,6 12,1 24,6 31,3 3,05 KPT-15-18A 28,58 1,6 12,1 27,0 33,7 3,05 KPT-15-20A 31,75 2,4 14,5 29,4 36,9 3,05 KPT-15-22A 34,93 2,4 14,5 31,8 40,1 3,05 KPT-15-24A 38,10 2,4 15,4 34,9 43,3 3,75 GASKETS Shell Size Alu-Flex Conductive Chloroprene non conductive Shell Size Alu-Flex Conductive Chloroprene non conductive 8 075-8543-000 075-8543-010 18 075-8543-005 075-8543-015 10 075-8543-001 075-8543-011 20 075-8543-006 075-8543-016 12 075-8543-002 075-8543-012 22 075-8543-007 075-8543-017 14 075-8543-003 075-8543-013 24 075-8543-008 075-8543-018 16 075-8543-004 075-8543-014 WIRE HOLE FILLERS Contact Size Colour code Cannon 20 Red 225-1012-000 16 Blue 225-1011-000 12* Yellow 225-0072-000 Coaxial 14a4* Yellow 225-0018-000 *KPSE only Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 35 CROSS REFERENCE LIST KPT/KPSE/VG95328/MIL-C-26482 All three product lines have specific characteristics and provide a set of unique variants, however, all lines are fully intermateable with each other as well as any other connector series designed according to MIL-DTL 26482 Series I or VG95238 standards. Solder ITT Cannon MIL-DTL-26482-Style Crimp VG95328 ITT Cannon MIL-DTL-26482-Style VG95328 KPT00E MS3110E KPSE00E MS3120E VG95328A KPT00F MS3110F KPSE00F MS3120F VG95328B KPT0E-DN KPSE0E-DN KPT0E-DZ KPSE0E-DZ KPT01A VG95328R KPSE01A KPT01E MS3111E KPSE01E MS3121E KPT01F MS3111F KPSE01F MS3121F KPT1E-DN KPSE1E-DN KPT1E-DZ KPSE1E-DZ KPT02E MS3112E KPSE02E VG95328H KPT06A MS3122E VG95328C KPSE06A KPT06E MS3116E KPSE06E MS3126E KPT06F MS3116F KPSE06F MS3126F VG95328K KPT6E-DN KPSE6E-DN VG95328J KPT6E-DZ KPSE6E-DZ VG95328M KPT07A KPSE07A KPT07E MS3114E KPSE07E MS3124E VG95328D KPT07F MS3114F KPSE07F MS3124F VG95328E KPT7E-DN KPSE7E-DN KPT7E-DZ KPSE7E-DZ KPT08E KPSE08E KPT08F KPSE08F KPTB MS3119 VG95328S VG95328P CROSS REFERENCE LIST PROTECTIVE CAPS KPT/VG95328/MIL-C-26482 This table shows which commercial protective caps are available per VG95328. Additionally, it can be used when cross-referencing a MS protective cap for a KPT (ITT Cannon) substitute. Part No. ITT Cannon KPT80..C Part No. MIL-DTL-26482-Style Part No. VG95328 MS3180..C VG95328Z2A.. KPT80..CB VG95328Z2B.. KPT80..D KPT81..C VG95328Z2C.. MS3181..C VG95328Z1A.. KPT81..CB VG95328Z1B.. KPT81..D VG95328Z1C.. KPT81..N KPT81..NB MS3181..N VG95328Z3C.. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 36 www.ittcannon.com TOOLS AND ACCESSORIES KPT/KPSE/KPTC Hand crimping tool M22520/1-01 and Locator: Order No.: 995-0001-585 This universal tool features just one crimp locator with different adjustments for crimping contacts. The tool provides an 8-indent crimp. Note: The locator needs to be purchased separately: Descripton Locator Name Order-No. Contact Size 12 M22520/1-02 Locator 995-0001-736 16 20 M22520/1-01 Hand Crimp Tool 995-0001-585 Pneumatic crimping tool WA27F-CE: Pneumatic operated crimp tool for higher volume production. A pedal for foot operation can also be provided. The tool provides an 8-indent crimp equivalent to hand crimping tool. Crimp tool and Bench mount Foot pedal Gauge Description Name Order No. Pneumatic crimp tool (AWG12-20) WA27F-CE 121586-5067 Bench mount BM-2A 121586-5068 Foot pedal WA10A 121586-5069 Gauge M22520-3-1 995-0001-684 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 37 Insertion Tools To insert crimped contacts into the insulator insertion tools are required. KPSE Insertion Tool Description Name Order No. insertion tool for contact size # 20 MS24256-A20 995-0001-950 insertion tool for contact size # 16 MS24256-A16 995-0001-951 insertion tool for contact size # 12 MS24256-A12 995-0001-913 KPTC Insertion Tool CIT-KPTC-20 Description Name Order No. insertion tool for contact size # 20 CITG-20A 121086-3104 insertion pliers for contact size # 20 CIT-KPTC-20 121086-3101 insertion tool for contact size # 16 CIT-16 121086-3008 insertion pliers for contact size # 16 CIT-F80-16 121086-0097 insertion TIP for insertion tool # 20 CITG-20A-TIP 121086-3105 insertion TIP for insertion tool # 16 CIT-16-TIP 317-1153-000 CIT-F80-16 Extraction Tools In case a contact has to be exchanged the following extraction tools are to be used: KPSE Extraction tool Description Name Order No. Replacement-TIP extraction tool for contact size # 20 MS24256-R20 995-0001-965 317-7130-000 extraction tool for contact size # 16 MS24256-R16 995-0001-964 317-7129-000 extraction tool for contact size # 12 MS24256-R12 995-0001-966 317-7131-000 extraction tool for coax contacts (KPT14A4) CET-C6B 070064-0000 121586-0046 Description Name Order No. Replacement-TIP extraction tool for contact size # 20 CET-KPTC-20 121086-3212 317-8668-000 extraction tool for contact size # 16 CET-KPTC-16 121086-3277 317-8649-025 Extraction tool for coax contacts KPTC Extraction tool Notes 1. For insertion and extraction of the contacts and for connector assembly, see Assembly Instructions CAS25098E Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 38 www.ittcannon.com Pipe Wrench Soft Jaw Adjustable Pliers for tightening the endbell housing. Order No.: 550014-1644 Dimensions for Single Conductor and Wire Stripping In order to assure proper function according to connector specification, especially concerning water tightness, the diameter of the wire insulation must correlate with the following data: KPTC KPSE Contact Size Insulation dimensions Waterproof / O mm Conductor dimensions AWG mm min. max. 20 24 - 18 0,2 - 0,75 1.3 2.1 16 20 - 14 0,5 - 2,0 1.8 2.7 12 14 - 12 - 2.5 3.4 Contact Size Conductor dimensions Insulation dimensions Waterproof / O mm AWG mm min. max. 20 24 - 18 0,2 - 0,75 1.4 2.15 16 20 - 14 0,5 - 2,0 1.6 2.7 Contacts KPTC Termination Contact size AWG mm 20 28 - 24 0,08 - 0,20 20 24 - 18 0,20 - 0,75 20 - 16 Contact type 0,5 - 1,0 20- 14 0,5 - 2,0 For shell size 8 and contact layout 12 - 14 only Contact order reference Contact order reference Pin 430-8588-029 Gold plating Silver plating Socket 031-8704-508 031-8704-509 031-8704-506 Pin 430-8560-404 430-8560-411 430-8560-410 Socket 430-8588-031 - - Pin 430-8588-030 - - Socket 031-8704-502 - - Pin 430-8560-406 - - KPSE / VG95328 Contact size Termination AWG mm 20 24 - 18 0,2 - 0,75 16 20 - 14 0,5 - 2,0 12 14 - 12 2,0 Contact type Contact order reference KPSE version VG95328 version Socket with insulation support 031-8704-203 031-8704-203 Pin with insulation support 430-8560-006 430-8560-006 Socket 031-8704-000 031-8704-000 Pin 430-8560-004 430-8560-004 Socket 031-8704-012 - Pin 430-8560-016 - Grounding Pin 430-8560-020 - KPT14A4 Contact size Coaxial Termination Cable type RG187/U, RG188/U Contact type Contact order reference Receptacle DM 53742-5001 Plug DM 53740-5001 Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 39 PRODUCT SAFETYINFORMATION 1. MATERIAL CONTENT AND PHYSICAL FORM 4. DISPOSAL Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. Incineration of certain materials may release noxious or even toxic fumes. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30V ac or 42.5V DC are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature Overheating may occur if the ratings in the product Data Sheet/ Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. All information given are temperature limits. The operation temperature depends on the individual application. (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 40 www.ittcannon.com Amazing things happen when great things connect www.ittcannon.com 41 Notes _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products 42 www.ittcannon.com Notes _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ Dimensions shown in mm|Specifications and dimensions subject to change This document solely applies to European manufactured KPT / KPSE / KPTC products www.ittcannon.com 43 Connect with your ITT Cannon representative today or visit us at www.ittcannon.com Connect with the experts ITT's Cannon brand is a world leader in the design and manufacture of highly engineered connector solutions for multiple end markets. North America 56 Technology Drive Irvine, CA 92618 USA Phone: +1.800.854.3028 Europe Corso Europa 41/43 20020 Lainate (MI), Italy Phone: +39.02938721 Cannonstrasse 1 71384 Weinstadt, Germany Phone: +49.7151.699.0 The "ITT Engineered Blocks" symbol, "Engineered for life", "ITT" and "Cannon" are registered trademarks of ITT Inc. Specification and other data are based on information available at the time of printing, and are subject to change without notice. Asia Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Boan District, Shenzhen City, Guangdong Province, China 518215 Phone: +86.755.2726.7888 (c) 2020 ITT Inc. ITT Cannon KPx Catalog 112020