ALUMINUM ELECTROLYTIC CAPACITORS PS Miniature Sized, Low Impedance, For Switching Power Supplies series (Through 100V only) Wide temperature range type, miniature sized. Compliant to the RoHS directive (2002/95/EC). PJ Smaller PS TS Long Life Specifications Performance Characteristics Item Category Temperature Range - 55 to +105C (6.3 to 100V), - 40 to +105C (160 to 400V), - 25 to +105C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 15000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current Leakage current 6.3 to 100 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (A) , whichever is greater. 160 to 450 CV <= 1000 : I= 0.1CV+40 (A)max. (1 minute's) CV > 1000 : I= 0.04CV+100 (A)max. (1 minute's) For capacitance of more than 1000F, add 0.02 for every increase of 1000F Rated voltage (V) tan ( MAX.) Tangent of loss angle (tan ) 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 6.3 * 10 -- -- 5 16 * 25 -- -- 4 35 * 50 -- -- 3 Measurement frequency : 120Hz, 50 0.10 63 0.09 100 0.08 Temperature : 20C 160 to 250 315 * 350 400 * 450 0.15 0.20 0.25 Measurement frequency : 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio Z- 40C / Z+20C (MAX.) Z- 55C / Z+20C Stability at Low Temperature 63 * 100 160 * 200 2 3 3 4 -- -- 250 3 6 -- 315 * 350 4 8 -- 400 6 10 -- 450 15 -- -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 3000 hours (2000 hours for D= 5 to 10) at 105C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 25V 470F) Radial Lead Type d Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 UP S 1 E 4 7 1 MPD MAX. Size code D+ P 0.5 Configuration Capacitance tolerance (20%) Rated capacitance (470F) Rated voltage (25V) Pressure relief vent (6.3up) Series name L+ 15MIN MAX. 4MIN Type (mm) (L < 20) 1.5 (L 20) 2.0 D 5 6.3 8 10 12.5 16 18 20 22 25 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 d Configuration D 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 6.3 8 * 10 12.5 to 18 20 to 25 * Please refer to page 20 about the end seal configulation. Pb-free leadwire Pb-free PET sleeve DD ED PD HD RD Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.47 to 4700 -- 0.17 0.40 0.65 1.00 100 to 220. 0.30 0.50 0.65 0.80 1.00 330 to 680. 0.57 0.71 0.82 0.90 1.00 .1000 to 15000 0.75 0.87 0.96 0.98 1.00 0.47 to 2200 0.80 1.00 1.25 1.40 1.60 330 to 470. 0.90 1.00 1.10 1.13 1.15 Cap.(F) Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next pages. CAT.8100A ALUMINUM ELECTROLYTIC CAPACITORS PS series Standard Ratings DxL (mm) V (Code) 6.3 (0J) Co de 4.7 10 22 33 47 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 15000 4R7 100 220 330 470 101 151 221 331 471 681 102 152 222 332 472 682 103 153 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 20 16 x 25 16 x 25 16 x 31.5 18 x 35.5 V (Code) 0.47 1 2.2 3.3 4.7 10 22 33 47 100 150 220 330 470 680 1000 1500 2200 3300 4700 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 Co de R47 010 2R2 3R3 4R7 100 220 330 470 101 151 221 331 471 681 102 152 222 332 472 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 160 160 160 160 250 250 250 410 600 600 1000 1250 1250 1900 1900 2350 2700 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 35 (1V) V Cap.(F) 1.50 1.50 1.50 1.50 0.50 0.50 0.50 0.28 0.19 0.19 0.11 0.075 0.075 0.038 0.038 0.033 0.030 1.50 1.50 1.50 1.50 0.50 0.50 0.28 0.28 0.19 0.14 0.11 0.075 0.057 0.038 0.033 0.030 0.027 160 160 160 160 250 250 410 410 600 800 1000 1250 1550 1900 2350 2700 3300 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 1.50 1.50 1.50 1.50 0.50 0.50 0.28 0.28 0.19 0.14 0.11 0.075 0.057 0.038 0.033 0.030 0.027 160 160 160 160 250 250 410 410 600 800 1000 1250 1550 1900 2350 2700 3300 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 63 (1J) 50 (1H) 1.50 1.50 1.50 1.50 1.50 0.50 0.28 0.28 0.19 0.14 0.11 0.075 0.038 0.038 0.033 0.030 0.027 160 160 160 160 160 250 410 410 600 800 1000 1250 1900 1900 2350 2700 3300 100 (2A) Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple () MAX. (mArms) () MAX. (mArms) () MAX. (mArms) () MAX. (mArms) D x L D x L D x L D x L 20C/100kHz 105C/100kHz 20C/100kHz 105C/100kHz 20C/100kHz 105C/100kHz 20C/100kHz 105C/100kHz (mm) (mm) (mm) (mm) Item Cap. (F) 25 (1E) Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple (mArms) (mArms) (mArms) (mArms) D x L D x L D x L D x L () MAX. () MAX. () MAX. () MAX. 20C/100kHz 105C/100kHz 20C/100kHz 105C/100kHz 20C/100kHz 105C/100kHz 20C/100kHz 105C/100kHz (mm) (mm) (mm) (mm) Item Cap. (F) 16 (1C) 10 (1A) 160 160 160 160 250 410 410 600 800 1000 1250 1550 1900 2350 2700 3300 7.50 5.30 4.50 3.90 3.50 2.10 1.80 0.65 0.65 0.36 0.26 0.18 0.15 0.13 0.10 0.058 0.040 0.035 25 40 55 65 90 120 150 250 250 340 490 650 810 1100 1200 1600 2000 2300 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 4.70 2.10 0.98 0.71 0.65 0.31 0.25 0.20 0.12 0.081 0.058 0.049 0.038 0.032 68 110 180 220 310 390 440 700 980 1200 1300 1380 1750 2120 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 16 x 25 16 x 25 16 x 31.5 16 x 35.5 18 x 40 43.0 20.0 9.80 6.60 4.60 1.80 0.68 0.46 0.37 0.18 0.13 0.10 0.090 0.076 0.064 0.047 20 30 44 58 74 130 230 320 420 580 710 890 1080 1310 1410 1520 160 200 250 315 350 400 450 2C 2D 2E 2F 2V 2G 2W 12 x 11 17 6.3 x 11 25 6.3 x 11 36 8 x 11.5 50 10 x 12.5 80 10 x 16 140 10 x 20 190 12.5 x 25 220 12.5 x 25 335 16 x 31.5 515 18 x 40 1100 22 x 40 1310 22 x 50 12 x 11 17 6.3 x 11 29 8 x 11.5 42 10 x 12.5 50 10 x 12.5 88 10 x 20 155 12.5 x 25 190 12.5 x 25 230 16 x 25 *18 x 35.5 340 525 20 x 40 1150 22 x 50 1350 25 x 50 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 16 x 25 *18 x 35.5 20 x 40 22 x 50 6.3 1.50 1.50 1.50 1.50 0.50 0.28 0.28 0.19 0.14 0.11 0.075 0.057 0.038 0.033 0.030 0.027 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 12 17 25 36 43 70 130 180 220 330 500 900 1200 6.3 6.3 x 11.5 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 25 16 x 35.5 18 x 40 22 x 50 8 11 16 28 34 45 72 120 155 190 285 540 x 11.5 10 x 12.5 10 x 16 10 x 16 10 x 20 12.5 x 20 16 x 25 16 x 31.5 *18 x 35.5 20 x 40 25 x 50 8 11 17 31 38 49 82 130 160 200 290 x 12.5 x 16 10 x 20 10 x 20 12.5 x 25 16 x 25 16 x 31.5 *18 x 35.5 22 x 50 10 16 10 27 36 43 72 110 140 170 350 x 12.5 x 20 12.5 x 20 12.5 x 20 16 x 25 16 x 31.5 *18 x 35.5 20 x 40 25 x 50 10 18 10 29 41 49 75 115 145 175 350 550 Case size Rated D x L (mm) ripple Rated ripple current (mArms ) at 105C 120Hz Size 20x31 is available for capacitors marked " * " Size 20x35 is available for capacitors marked " " In this case, 6 will be put at 12th digit of type numbering system. CAT.8100A