ALUMINUM ELECTROLYTIC CAPACITORS
PSseries
Miniature Sized, Low Impedance,
For Switching Power Supplies
Wide temperature range type, miniature sized.
Compliant to the RoHS directive (2002/95/EC).
PS
PJ
Radial Lead Type
Specifications
Type numbering system (Example : 25V 470
µ
F)
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan
δ
)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance Characteristics
Item –55 to +105˚C (6.3 to 100V), –40 to +105˚C (160 to 400V), –25 to +105˚C (450V)
6.3 to 450V
0.47 to 15000µF
±20% at 120Hz, 20˚C
Printed with white color letter on dark brown sleeve.
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Rated voltage (V)
6.3 to 100 160 to 450
Leakage current
After 1 minute's application of rated voltage, leakage current
is not more than 0.03CV or 4 (µA) , whichever is greater. CV <
=1000:
I
= 0.1CV+40 (µA)max. (1 minute's)
CV > 1000:
I
= 0.04CV+100 (µA)max. (1 minute's)
Rated voltage (
V)
tan δ (
MAX.
)
6.3
0.24 10
0.20 16
0.16 25
0.14 35
0.12 50
0.10 63
0.09 100
0.08
160 to 250
0.15
315 · 350
0.20
400 · 450
0.25
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Measurement frequency : 120Hz, Temperature : 20˚C
Measurement frequency : 120Hz
Z–25˚C / Z+20˚C
Rated voltage (V)
Impedance ratio
(MAX.)
6.3 · 10
—
—
5
16 · 25
—
—
4
35 · 50
—
—
3
63 · 100
2
3
—
160 · 200
3
4
—
250
3
6
—
315 · 350
4
8
—
400
6
10
—
450
15
—
—
Z–40˚C / Z+20˚C
Z–55˚C / Z+20˚C
The specifications listed at right shall be met when the
capacitors are restored to 20˚Cafter D.C. bias plus rated ripple
current is applied for 3000 hours (2000 hours for φD= 5 to 10) at
105˚C, the peak voltage shall not exceed the rated voltage.
Frequency coefficient of rated ripple current
V
6.3 to 100
160 to 450
Frequency
Cap.(µF)
0.47 to 4700
100 to 220.
330 to 680.
.1000 to 15000
0.47 to 2200
330 to 470.
50Hz
—
0.30
0.57
0.75
0.80
0.90
120Hz
0.17
0.50
0.71
0.87
1.00
1.00
300Hz
0.40
0.65
0.82
0.96
1.25
1.10
1kHz
0.65
0.80
0.90
0.98
1.40
1.13
10kHz or more
1.00
1.00
1.00
1.00
1.60
1.15
Leakage current
tan δ
Capacitance change
Less than or equal to the initial specified value
200% or less than the initial specified value
Within ±20% of the initial capacitance value
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
• Please refer to page 20 about the end seal configulation.
(Through 100V only)
Dimension table in next pages.
Smaller
TS
Long Life
CAT.8100A