SNAPFIT - SCREWFIT NEW AC Inlets for Pcb Mounting - Snap-in or Screw-on Complete MULTIFIT family on page 10 Order Numbers: GSP 2 . X X X X . X X Screw-on Snap-in Color of Housing 1* = black 2 = grey Standards: EN60320; IEC 320 / C14 SNAPFIT SCREWFIT with insulation cover d1 = 6 0.05 for SNAPFIT d1 = 3.6 for SCREWFIT rear panel mounting split panel mounting * For "cold" connections 65C, Protection Class I or II * Pcb mount with snap-in or screw-on feet (self-tapping screws provided) * panel mount from rear or "sandwich" between top and bottom panels for optimum stability (see page 10 for further information) * Ground terminal solder / quick-connect 4.8 x 0.8mm or 6.3 x 0.8mm; positioned for access from top or back of connector * Optional insulation cover for protection against electrical contact * Material: thermoplastic, polyamid 6.6 (UL 94V-O) Terminals: brass, tin and nickel-plated UL CSA VDE SEMKO SEV 12 recognition certification approval approval approval 15A/250V File #E96454 15A/250V File #LR38456 10A/250V File #73753 File 10A/250V numbers 10A/250V on request Panel Mounting 1 = 1.0mm panel thickness 2 = 1.2mm panel thickness 3* = 1.5mm panel thickness 4 = 2.0mm panel thickness 5 = 2.5mm panel thickness 6 = 3.0mm panel thickness Ground Terminal 0 = protection class II, without ground terminal 1* = protection class I, solder/quick connect 4.8 x 0.8mm, 90 to connector axis 2 = same as 1, but not connected with PCB 3* = protection class I, solder/quick connect terminal 4.8 x 0.8mm, in connector axis 4 = same as 3, but not connected with PCB 5 = protection class I, solder/quick connect terminal 6.3 x 0.8mm, 90 to connector axis 6 = same as 5, but not connected with PCB 7 = protection class I, solder/quick connect terminal 6.3 x 0.8mm, in connector axis 8 = same as 7, but not connected with PCB A = protection class I, solder terminals, no PCB terminals B = protection class I, quick connect terminals 4.8 x 0.8mm, no PCB terminals C = protection class I, solder terminals, 90 to the connector axis D = same as C, but not connected with PCB E = protection class I, solder terminals, in connector axis F = same as E, but not connected with PCB Insulation Cover 0* = without insulation cover 1* = black insulation cover, mounted ** 2 = black insulation cover included (separate) ** Printed Circuit Board Mounting 0* = with 3mm self-tapping screws (screws not included) 1* = with 3mm self-tapping screws (2 screws included) 2* = with snap-in feet for PCB 1.6mm 3 = with snap-in feet for PCB 1mm 4 = with snap-in feet for PCB 1.2mm 5 = with snap-in feet for PCB 1.5mm 6 = with snap-in feet for PCB 2mm 7 = with snap-in feet for PCB 2.4mm 8 = with snap-in feet for PCB 3.2mm Terminal Spacing 0 = No PCB terminals 1 = type spacings 7/9.7mm 2 = type spacings 9.05/7.3mm 3* = type spacings 9.05/9.7mm 4* = type spacings 7/7.3mm Basic Specification GSP2* = appliance connector for mounting on PCB *Standard configuration. Contact Schurter for non-standard order minimums. ** For additional insulation cover (spare part only), use order number 0098.0077 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail 73024.2314@compuserve.com * Website http://www.schurterinc.com