Multilayer Ceramic Capacitors High Capacitance Series Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high capacitance MLCC offers low ESR and excellent frequency characteristics to be suited for coupling and decoupling applications in circuit. The high dielectric constant material X7R, X5R and Y5V are used for this series product. Features: * * Small size with high capacitance Capacitor with lead-free termination (pure Tin) Applications: * * * Digital circuit coupling or decoupling applications For high frequency and high-density type power suppliers For bypassing External Dimensions: Size Inch (mm) L (mm) W (mm) T (mm)/Symbol MB (mm) 0402 (1005) 1 0.05 0.5 0.05 0.5 0.05 N 0.25 +0.05/-0.1 1.6 0.1 0.8 0.1 0.8 0.07 S 0603 (1608) 1.6 +0.15/0.1 0.8 +0.15/0.1 0.8 +0.15/0.1 X 2 0.15 1.25 0.1 2 0.2 1.25 0.2 0805 (2012) 1206 (3216) Fig. 1 The outline of MLCC 3.2 0.15 1.6 0.15 3.2 0.2 1.6 0.2 3.2 +0.3/-0.1 1.6 +0.3/-0.1 3.2 0.3 2.5 0.2 B D 1.25 0.2 I 0.950.1 C 1.25 0.1 D 1.6 0.2 G 1.150.15 J 1.6 +0.3/-0.1 P 0.95 0.1 C 1.25 0.1 D 1.6 0.2 G 1210 (3225) 3.2 0.4 0.8 0.1 1.250.1 2.5 0.3 2 0.2 K 2.5 0.3 M 0.4 0.15 0.5 0.2 0.6 0.2 0.750.25 Remark: Reflow soldering only is recommended www.element14.com www.farnell.com www.newark.com Page <1> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series General Electrical Data: Dielectric X7R Size X5R 0402, 0603, 0805, 1206, 1210 Capacitance range* 0.56F to 10F 0.027F to 22F Capacitance tolerance** K (10%), M (20%) Rated voltage (WVDC) 6.3V, 10V, 16V, 25V, 50V, 100V Tan * Note 1 Insulation resistance at Ur R x C 500 x F Operating temperature -55C to +125C -55C to +85C Capacitance characteristic 15% Termination Ni/Sn (lead-free termination) * Measured at 1 0.2Vrms, 1kHz 10% for C10F; 0.5 0.2Vrms, 120Hz 20% for C>10F, 30~70% related humidity, 25C ambient temperature for X7R, X5R. ** Preconditioning for Class II MLCC: Perform a heat treatment at 150 10C for 1 hour, then leave in a mbient condition for 24 2 hours before measurement. Note 1: X7R/X5R Rated vol. ^50V 35V 25V 16V 10V 6.3V 4V D.F.% %2.5% %3.5% %3.5% Exception of D.F. % %3% 0201(50V); 0603^0.047F; 0805^0.18F;1206^0.47F %5% 1210^4.7F %10% 0603^1F; 0805^1F;1206^4.7F; 1210^10F %10% 08052.2F; 1210^10F %5% 0201^0.01F;0805^1F; 1210^10F %7% 0603^0.33F; 1206^4.7F %10% 0402^0.10F;0603^0.47F; 0805^2.2F; 1206^6.8F ; 1210^22F %5% 0201^0.01F;0402^0.033F; 0805^0.68F;1206^2.2F;1210^4.7F %10% 0402^0.22uF; 0603^0.68F;0805^2.2F; 1206^4.7F; 1210^22F; TT series %10% 0201^0.012F;0402^0.33F;0603^0.33 F; 0805^2.2F 1206^2.2F;1210^22F; TT series %15% 0201^0.1F; 0402^1F %15% 0201^0.1F;0402^1F;0603^10F; 0805^4.7F; 1206^47F :1210^100F %20% 0402^2.2F --- --- %3.5% %5% %10% %15% www.element14.com www.farnell.com www.newark.com Page <2> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Capacitance Range: X7R Dielectric Dielectric X7R Size 0603 Rated Voltage V DC 6.3 10 16 0.56F (564) X X 0.68F (684) X X 0.82F (824) 1.0F (105) Capacitance 0805 X X X X X 6.3 10 16 25 D D D 1.5F (155) 2.2F (225) 1206 I 6.3 10 16 25 50 100 10 16 25 50 100 J J J P P D D D D K K G I I I J J J P I I I J J J P P P P P P P P P P 3.3F (335) 4.7F (475) 1210 M K K K K M 6.8F (685) 10F (106) K X5R Dielectric Dielectric X5R Size Capacitance Rated Voltage (V DC) 0402 6.3 10 16 0.027F (273) N 0.033F (333) N 0.039F (393) N 0.047F (473) N 0.056F (563) N N 0.068F (683) N N 0.082F (823) N N N 0.10F (104) N N N 0.15F (154) 0.22F (224) 0603 25 6.3 10 1206 25 6.3 10 16 25 1210 10 16 N N N N X X X X X X X N N X X 0.47F (474) N N X X X 0.68F (684) N N X X X N N 0.39F (394) 0.82uF (824) 1.0F (105) 16 N 0.27uF (274) 0.33F (334) 0805 16 25 6.3 10 X X X X X X X X D D www.element14.com www.farnell.com www.newark.com Page <3> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series X5R Dielectric Dielectric X5R Size 0402 Rated Voltage (V DC) 6.3 10 16 Capacitance 1.5F (155) 0603 25 6.3 10 0805 16 25 6.3 10 X I X X 16 1206 1210 25 6.3 10 16 25 10 16 J K K K K I J 2.2F (225) X I I I I J J P 3.3F (335) X I I I I P P P 4.7F (475) X I I I I P P P K K I I I P P K K 6.8uF (685) 10F (106) 22F (226) P P P P P P P M Packaging Style and Quantity: Size 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) Paper tape Thickness (mm) / Symbol Plastic tape 7" reel 13" reel 7" reel 13" reel 0.5 0.05 N 10k 50k - - 0.8 0.07 S 4k 15k - - 0.8 +0.15/-0.1 X 4k 15k - - 0.8 0.1 B 4k 15k - - 1.25 0.1 D - - 3k 10k 1.25 0.2 I - - 3k 10k 0.95 0.1 C - - 3k 10k 1.15 0.15 J - - 3K 10K 1.25 0.1 D - - 3k 10k 1.6 0.2 G - - 2k 10k 1.6 +0.3/-0.1 P - - 2k 9k 0.95 0.1 C - - 3k 10k 1.25 0.1 D - - 3k 10k 1.6 0.2 G - - 2k - 2 0.2 K - - 1k 6k 2.5 0.3 M - - 1k 6k www.element14.com www.farnell.com www.newark.com Page <4> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Electrical Characteristics: Typical Impedance/ESR vs. Frequency ESR and IZI vs. frequency (0805F106_10V) ESR and IZI vs. frequency (1206 x 106_10V) ESR and IZI vs. frequency (0805F475_10V) ESR and IZI vs. frequency (0603 x105_10V www.element14.com www.farnell.com www.newark.com Page <5> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item Test Condition 1 Visual and Mechanical - 2 Capacitance Requirements No remarkable defect. Dimensions to conform to individual specification sheet. Shall not exceed the limits given in the detailed spec. NP0: Cap30pF, Q1000; Cap<30pF,Q400+20C X7R, X5R: Related Vol. ^50V 35V 3 Q/ D.F. (Dissipation Factor) Class I: NP0 Cap1,000pF 1 0.2Vrms, 1MHz10% Cap>1,000pF 1 0.2Vrms, 1KHz10% Class II: X7R,X7E, X5R,Y5V Cap10F, 1 0.2Vrms, 1kHz10% Cap>10F, 0.50.2Vrms, 120Hz20% Test condition: 0.50.2Vrms, 1kHz10% X7R: 0603^225(10V), 0805=106(6.3V&10V) X5R: 01R5^103, 0201^224 (6.3V), 0402^475 (6.3V), 0402^225(10V), 0603=106 (6.3V) 25V 16V 10V 6.3V 4V D.F.% %2.5% %3.5% Exception of D.F.% %3% 0201(50V); 0603^0.047F;0805 ^0.18F;1206^0.47F %5% 1210^4.7F %10% 0603^1F; 0805^1F;1206^4.7F; 1210^10F %10% 08052.2F; 1210^10F %5% 0201^0.01F;0805^1F; 1210^10F %7% 0603^0.33F; 1206^4.7F %10% 0402^0.1F;0603^0.47F; 0805^2.2F; 1206^6.8F ; 1210^22F ; TT series %5% 0201^0.01F;0402^0.033F; 0805^0.68F;1206^2.2F;12 10^4.7F %10% 0402^ 0.22uF; 0603^0.68F;0805^2.2F; 1206^4.7F; 1210^22F; TT series %10% 0201^0.012F;0402^0.33F ;0603^0.33F; 0805^2.2F 1206^2.2F;1210^22F; TT series %15% 0201^0.1F; 0402^1F %15% 0201^0.1F;0402^1F; |0603^10F; 0805^4.7F; 1206^47F :1210^100F; %20% 0402^2.2F %3.5% %3.5% %5% %10% %15% - - www.element14.com www.farnell.com www.newark.com Page <6> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item 4 Dielectric Strength Test Condition Requirements To apply voltage (100V) 250%. Duration: 1 to 5 sec. Charge and discharge current less than 50mA. No evidence of damage or flash over during test. 10G or RxC^500-F whichever is smaller. Class II (X7R, X5R) Rated voltage Insulation Resistance 100V: X7R 50V:06031F;08051F;12064.7F; 12104.7F 5 Insulation Resistance 35V:08052.2F;1210^10F To apply rated voltage for max. 120 sec. 25V:04021F;06032.2F;08052.2 F;120610F;121010F 16V:04020.22F;06031F;08052.2 F;120610F;121047F 10G or RxC^100-F whichever is smaller. 10V:020147nF;04020.47F;06030. 47F;08052.2F; 12064.7F;121047F 6.3V ; 4V With no electrical load. 6 Temperature Coefficient T.C. Operating Temp. NPO -55~125C at 25C X7R -55~125C at 25C X5R -55~ 85C at 25C T.C. Capacitance Change NPO Within 30ppm/C X7R Within 15% X5R Within 15% Adhesive Strength of Termination Pressurizing force: 5N (0603) and 10N (>0603) Test time: 101 sec. No remarkable damage or removal of the terminations. 8 Vibration Resistance Vibration frequency: 10~55 Hz/min. Total amplitude: 1.5mm Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change and Q/D.F.: To meet initial spec. 9 Solderability Solder temperature: 2355C Dipping time: 20.5 sec. 95% min. coverage of all metalized area. 7 www.element14.com www.farnell.com www.newark.com Page <7> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No 10 11 Item Test Condition Requirements Bending Test he middle part of substrate shall be T pressurized by means of the pressurizing rod at a rate of about 1 mm per second until the deflection becomes 1 mm and then the pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: NP0: within 5% or 0.5pF whichever is larger X7R, X5R: within 12.5% Y5V: within 30% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.) Resistance to Soldering Heat Solder temperature: 2605C Dipping time: 101 sec Preheating: 120 to 150C for 1 minute before immerse the capacitor in a eutectic solder. Before initial measurement (Class II only): Perform 150+0/-10C for 1 hr and then set for 242 hrs at room temp. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: NP0: within 2.5% or 0.25pF whichever is larger X7R, X5R: within 7.5% Q/D.F., I.R. and dielectric strength: To meet initial requirements. 25% max. leaching on each edge. Conduct the five cycles according to the temperatures and time. Step Temp. (C) Time (min.) Min. operating temp. +0/-3 303 2 Room temp. 2~3 3 Max. operating temp. +3/-0 303 4 Room temp. 2~3 1 12 Temperature Cycle efore initial measurement (Class II B only): Perform 150+0/-10C for 1 hr and then set for 242 hrs at r oom temp. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: NP0: within 2.5% or 0.25pF whichever is larger X7R, X5R: within 7.5% Q/D.F., I.R. and dielectric strength: To meet initial requirements. www.element14.com www.farnell.com www.newark.com Page <8> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item Test Condition Requirements No remarkable damage. Cap change: NP0: within 5% or 0.5pF whichever is larger X7R, X7E, X5R: 10V**,within 12.5%;6.3V within 25%; 10V:0603^4.7F;0402^1F;0201^0.1F, within 25%; Q/D.F. value: NP0: More than 30pF Q350, 10pFC30pF, Q275+2.5C Less than 10pF Q200+10C X7R, X5R 13 Test temp.: 402C Humidity: 90~95% RH Test time: 500+24/-0hrs. Before initial measurement (Class II Humidity (Damp Heat) only): Perform 150+0/-10C for 1 hour Steady State and then set for 242 hrs at room temp. Measurement to be made after keeping at room temp. for 242 hrs. Related Vol. D.F.% ^50V %3% Exception of D.F. % %6% 0201(50V);0603^0.047F; 0805^0.18F; 1206^0.47F %10% 1210^4.7F %20% 0603^1F; 0805^1F;1206^4.7F; 1210^10F 35V %5% %20% 08052.2F;1210^10F 25V %5% %10% 0201^0.01F;0805^1F; 1210^10F 16V 10V %5% %7.5% %14% 0603^0.33F;1206^4.7F %15% 0402^0.10F;0603^0.47F; 0805^2.2F;1206^6.8F; 1210^22F %10% 0603^0.15F;0805^0.68F; 1206^2.2F;1210^4.7F %15% 0201^0.01F;0402^0.033F; 0603^0.68F;0805^2.2F; 1206^4.7F; 1210^22F %15% 0201^0.012F;0402^0.33F; 0603^0.33F; 0805^2.2F; 1206^2.2F; 1210^22F %20% 0201^0.1F ;0402^1F 6.3V %15% %30% 0201^0.1F;0402^1F; 0603^10F; 805^4.7F; 1206^47F;1210^100F 4V %20% - - www.element14.com www.farnell.com www.newark.com Page <9> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item Test Condition Requirements I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X5R) 13 Test temp.: 402C Humidity: 90~95% RH Test time: 500+24/-0hrs. Humidity Before initial measurement (Class II (Damp Heat) only): Perform 150+0/-10C for 1 hour Steady State and then set for 242 hrs at room temp. Measurement to be made after keeping at room temp. for 242 hrs. Rated voltage Insulation Resistance 100V: X7R 1G or RxC ^10 -F whichever is smaller. 50V:06031F;08051F;12064.7F;12104. 7F 35V:08052.2F;1210^10F 25V:04021F;06032.2F;08052.2F; 120610F;121010F 16V:04020.22F;06031F;08052.2F;1206 10F;121047F 10V:020147nF;04020.47F;0603 0.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V 14 Test temp.: 402C Humidity: 90~95%RH Test time: 500+24/-0 hrs. To apply voltage: rated voltage. Humidity Before initial measurement (Class II (Damp Heat) only): To apply test voltage for 1hr at Load 40C and then set for 242 hrs at room temp. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: NP0: 7.5% or 0.75pF whichever is larger. X7R, X5R: 10V, within 12.5%;6.3V within 25%; 10V:0603^4.7F;0402^1F;0201^0.1F, within 25%; Q/D.F. value: NP0: C30pF,Q200;C<30pF, Q100+10/3C www.element14.com www.farnell.com www.newark.com Page <10> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item Test Condition Requirements X7R, X5R Related Vol. D.F.% Exception of D.F. % 0201(50V);0603^0.047F; 0805^0.18F; 1206^0.47F %6% ^50V %3% 35V %5% 25V Humidity (Damp Heat) Load 10V 1210^4.7F %20% 0603^1F; 0805^1F;1206^4.7F; 1210^10F %20% 08052.2F;1210^10F %10% 0201^0.01F;0805^1F; 1210^10F %14% 0603^0.33F;1206^4.7F %15% 0402^0.10F;0603^0.47F;0805^2. 2F;1206^6.8F; 1210^22F %10% 0603^0.15F;0805^0.68F;1206^2. 2F;1210^4.7F %15% 0201^0.01F;0402^0.033F;0603^0 .68F;0805^2.2F; 1206^4.7F; 1210^22F %15% 0201^0.012F;0402^0.33F; 0603^0.33F; 0805^2.2F; 1206^2.2F; 1210^22F %20% 0201^0.1F ;0402^1F %5% 16V 14 %10% %5% %7.5% 6.3V %15% %30% 0201^0.1F;0402^1F; 0603^10F; 805^4.7F; 1206^47F;1210^100F 4V %20% - - I.R.: 10V, 500M or 25-F whichever is smaller. Class II (X7R, X5R) Rated voltage Insulation Resistance 100V: X7R 500M or RxC^5-F whichever is smaller. 50V:06031F;08051F;12064.7F; 12104.7F 35V:08052.2F;1210^10F 25V:04021F;06032.2F;08052.2F; 120610F;121010F 16V:04020.22F;06031F;08052.2F; 120610F;121047F 10V:020147nF;04020.47F;0603 0.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V www.element14.com www.farnell.com www.newark.com Page <11> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item Test Condition Requirements No remarkable damage. Cap change: NP0: 3.0% or 0.3pF whichever is larger X7R, X5R: 10V, within 12.5%;6.3V within 25%; 10V:0603^4.7F;0402^1F;0201^0.1F, within 25%; Q/D.F. value: NP0: More than 30pF, Q350 10pFC<30pF, Q275+2.5C Less than 10pF, Q200+10C Test temp.: NP0, X7R: 1253C X5R: 853C Test time: 1000+24/-0 hrs. To apply voltage: (1) 6 .3V or C^10F or TT series: 150% of rated voltage. (2) 10V^Ur<500V: 200% of rated voltage. (3) 500V: 150% of rated voltage. (4) Ur^630V: 120% of rated voltage. (5) 1 00% of rated voltage for below range. Size 15 High Temperature Load (Endurance) Dielectric X7R, X5R: Related D.F.% Vol. Rated voltage Capacitance range 0201 X5R/X7R 6.3V,10V C^0.1F 0402 X5R/X7R 6.3V,10V C^1.0F 0603 X5R/X7R 6.3V,10V C^4.7F 0805 X5R/X7R 6.3V C^22F X5R/X7R 6.3V C^47F NP0 3000V C^1.5pF 1206 ^50V 35V 25V %3% %5% %5% (6) 1 50% of rated voltage for below range. Size Dielectric Rated voltage Capacitance range 0402 X5R/X7R 10V,16V, 25V C^0.22F 0603 X5R/X7R 10V,16V C^1.0F 0805 X5R/X7R 10V C^4.7F *Before initial measurement (Class II only): To apply test voltage for 1hr at test temp. and then set for 242 hrs at room temp. *Measurement to be made after keeping at room temp. for 242 hrs 16V 10V Exception of D.F. % %6% 0201(50V);0603^0.047F; 0805^0.18F; 1206^0.47F %10% 1210^4.7F %20% 0603^1F; 0805^1F;1206^4.7F; 1210^10F %20% 08052.2F;1210^10F %10% 0201^0.01F;0805^1F; 1210^10F %14% 0603^0.33F;1206^4.7F %15% 0402^0.10F;0603^0.47F;0805 ^2.2F;1206^6.8F; 1210^22F %10% 0603^0.15F;0805^0.68F;1206 ^2.2F;1210^4.7F %15% 0201^0.01F;0402^0.033F; 0603^0.68F;0805^2.2F; 1206^4.7F; 1210^22F %15% 0201^0.012F;0402^0.33F; 0603^0.33F; 0805^2.2F; 1206^2.2F; 1210^22F %20% 0201^0.1F ;0402^1F %5% %7.5% 6.3V %15% %30% 0201^0.1F;0402^1F; 0603^10F; 805^4.7F; 1206^47F;1210^100F 4V %20% - - www.element14.com www.farnell.com www.newark.com Page <12> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Reliability Test Conditions and Requirements: No Item Test Condition Requirements I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X5R) 15 Rated voltage Insulation Resistance 100V: X7R 500M or RxC^5-F whichever is smaller. 50V:06031F;08051F;12064.7F; 12104.7F High Temperature Load (Endurance) 35V:08052.2F;1210^10F 25V:04021F;06032.2F;08052.2F; 120610F;121010F 16V:04020.22F;06031F;08052.2F; 120610F;121047F 10V:020147nF;04020.47F;0603 0.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Appendixes Tape & Reel Dimensions The dimension of paper tape Size 0402 The dimension of plastic tape 0603 0805 1206 Thickness N S, X A B C, D, I B C, J, D G,P A0 0.620.05 1.020.05 1.50.1 1.50.1 <1.57 20.1 <1.85 <1.95 B0 1.120.05 1.80.05 2.30.1 2.30.1 <2.4 3.50.1 <3.46 <3.67 T 0.60.05 0.950.05 0.750.05 0.950.05 0.230.05 0.950.05 0.230.05 0.230.05 K0 - - - - <2.5 - <2.5 <2.5 W 80.1 80.1 80.1 80.1 80.1 80.1 80.1 80.1 P0 40.1 40.1 40.1 40.1 40.1 40.1 40.1 40.1 10 x P0 400.1 40.1 400.1 400.1 400.1 400.1 400.1 400.1 P1 20.05 40.1 40.1 40.1 40.1 40.1 40.1 40.1 www.element14.com www.farnell.com www.newark.com Page <13> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Size 0402 0603 0805 1206 Thickness N S, X A B C, D, I B C, J, D G,P P2 20.05 20.05 20.05 20.05 20.05 20.05 20.05 20.05 D0 1.550.05 1.550.05 1.550.05 1.550.05 1.50.05 1.50.05 1.50.05 1.50.05 D1 - - - - 10.1 - 10.1 10.1 E 1.750.05 1.750.05 1.750.05 1.750.05 1.750.1 1.750.1 1.750.1 1.750.1 F 3.50.05 3.50.05 3.50.05 3.50.05 3.50.05 3.50.05 3.50.05 3.50.05 Size 1210 Thickness C, D G, K M A0 <2.97 <2.97 <2.97 B0 <3.73 <3.73 <3.73 T 0.230.05 0.230.05 0.230.05 K0 <2.5 <2.5 <3 W 80.1 80.1 80.1 P0 40.1 40.1 40.1 10 x P0 400.1 400.1 400.1 P1 40.1 40.1 40.1 P2 20.05 20.05 20.05 D0 1.50.05 1.50.05 1.50.05 D1 10.1 10.1 10.1 E 1.750.1 1.750.1 1.750.1 F 3.50.05 3.50.05 3.50.05 Size 0402, 0603, 0805, 1206, 1210 Reel size 7" 10" 13" C 13+0.5/-0.2 13+0.5/-0.2 13+0.5/-0.2 W1 8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 A 1780.1 2501 3301 N 60+1/-0 1001 1001 www.element14.com www.farnell.com www.newark.com Page <14> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Constructions: No. Name X7R, X5R 1 Ceramic material BaTiO3 based 2 Inner electrode Ni 3 4 Termination 5 Inner layer Cu Middle layer Ni Outer layer Sn (Matt) Storage and handling conditions: (1) To store products at 5 to 40 C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. D ue to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. Recommended soldering conditions: The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. www.element14.com www.farnell.com www.newark.com Page <15> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Part Number Table Description Part Number Capacitor, MLCC, 2.2UF, 6.3V, X5R, 0402, Reel MC000404 Capacitor, MLCC, 2.2UF, 6.3V, X7R, 0603, Reel MC000497 Capacitor, MLCC, 2.2UF, 6.3V, X5R, 0603, Reel MC000499 Capacitor, MLCC, 4.7UF, 6.3V, X5R, 0603, Reel MC000500 Capacitor, MLCC, 1UF, 16V, X7R, 0603, Reel MC000504 Capacitor, MLCC, 2.2UF, 10V, X5R, 0603, Reel MC000513 Capacitor, MLCC, 4.7UF, 10V, X5R, 0603, Reel MC000515 Capacitor, MLCC, 1UF, 25V, X7R, 0805, Reel MC000548 Capacitor, MLCC, 2.2UF, 25V, X7R, 0805, Reel MC000551 Capacitor, MLCC, 4.7UF, 25V, X5R, 0805, Reel MC000556 Capacitor, MLCC, 4.7UF, 6.3V, X5R, 0805, Reel MC000609 Capacitor, MLCC, 1UF, 16V, X7R, 0805, Reel MC000610 Capacitor, MLCC, 4.7UF, 16V, X7R, 0805, Reel MC000614 Capacitor, MLCC, 4.7UF, 16V, X5R, 0805, Reel MC000617 Capacitor, MLCC, 1UF, 10V, X7R, 0805, Reel MC000618 Capacitor, MLCC, 4.7UF, 10V, X7R, 0805, Reel MC000619 Capacitor, MLCC, 3.3UF, 10V, X5R, 0805, Reel MC000622 Capacitor, MLCC, 4.7UF, 10V, X5R, 0805, Reel MC000623 Capacitor, MLCC, 10PF, 100V, NP0, 1206, Reel MC000624 Capacitor, MLCC, 1UF, 100V, X7R, 1206, Reel MC000639 Capacitor, MLCC, 1UF, 25V, X7R, 1206, Reel MC000656 Capacitor, MLCC, 2.2UF, 25V, X7R, 1206, Reel MC000658 Capacitor, MLCC, 4.7UF, 25V, X7R, 1206, Reel MC000661 Capacitor, MLCC, 4.7UF, 25V, X5R, 1206, Reel MC000664 Capacitor, MLCC, 1UF, 50V, X7R, 1206, Reel MC000681 Capacitor, MLCC, 1UF, 50V, X7R, 1206, Reel MC000682 Capacitor, MLCC, 4.7UF, 50V, X7R, 1206, Reel MC000694 Capacitor, MLCC, 22UF, 6.3V, X5R, 1206, Reel MC000697 Capacitor, MLCC, 1UF, 16V, X7R, 1206, Reel MC000708 Capacitor, MLCC, 2.2UF, 16V, X7R, 1206, Reel MC000710 Capacitor, MLCC, 22UF, 16V, X5R, 1206, Reel MC000713 Capacitor, MLCC, 2.2UF, 10V, X7R, 1206, Reel MC000714 Capacitor, MLCC, 1UF, 100V, X7R, 1210, Reel MC000717 Capacitor, MLCC, 2.2UF, 100V, X7R, 1210, Reel MC000719 Capacitor, MLCC, 1UF, 25V, X7R, 1210, Reel MC000722 Capacitor, MLCC, 2.2UF, 25V, X7R, 1210, Reel MC000724 Capacitor, MLCC, 22UF, 25V, X5R, 1210, Reel MC000727 www.element14.com www.farnell.com www.newark.com Page <16> 12/04/13 V1.0 Multilayer Ceramic Capacitors High Capacitance Series Part Number Table Description Part Number Capacitor, MLCC, 4.7UF, 25V, X5R, 1210, Reel MC000728 Capacitor, MLCC, 1UF, 50V, X7R, 1210, Reel MC000730 Capacitor, MLCC, 4.7UF, 50V, X7R, 1210, Reel MC000734 Capacitor, MLCC, 22UF, 6.3V, X5R, 1210, Reel MC000735 Capacitor, MLCC, 47UF, 6.3V, X5R, 1210, Reel MC000736 Capacitor, MLCC, 22UF, 16V, X7R, 1210, Reel MC000739 Capacitor, MLCC, 4.7UF, 16V, X7R, 1210, Reel MC000740 Capacitor, MLCC, 22UF, 16V, X5R, 1210, Reel MC000742 Capacitor, MLCC, 22UF, 10V, X7R, 1210, Reel MC000743 Capacitor, MLCC, 22UF, 10V, X5R, 1210, Reel MC000745 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <17> 12/04/13 V1.0