www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Description:
MLCC consists of a conducting material and electrodes. To manufacture a chip-type
SMT and achieve miniaturization, high density and high efciency, ceramic condensers
are used. WTC high capacitance MLCC offers low ESR and excellent frequency
characteristics to be suited for coupling and decoupling applications in circuit. The high
dielectric constant material X7R, X5R and Y5V are used for this series product.
Features:
• Small size with high capacitance
• Capacitor with lead-free termination (pure Tin)
Applications:
• Digital circuit coupling or decoupling applications
• For high frequency and high-density type power suppliers
• For bypassing
External Dimensions:
Fig. 1 The outline of MLCC
Size
Inch (mm) L (mm) W (mm) T (mm)/Symbol MB (mm)
0402 (1005) 1 ±0.05 0.5 ±0.05 0.5 ±0.05 N 0.25
+0.05/-0.1
0603 (1608)
1.6 ±0.1 0.8 ±0.1 0.8 ±0.07 S
0.4 ±0.15
1.6 +0.15/-
0.1
0.8 +0.15/-
0.1
0.8 +0.15/-
0.1 X
0805 (2012) 2 ±0.15 1.25 ±0.1 0.8 ±0.1 B
0.5 ±0.21.25±0.1 D
2 ±0.2 1.25 ±0.2 1.25 ±0.2 I
1206 (3216)
3.2 ±0.15 1.6 ±0.15 0.95±0.1 C
0.6 ±0.2
1.25 ±0.1 D
3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 G
1.15±0.15 J
3.2 +0.3/-0.1 1.6 +0.3/-0.1 1.6 +0.3/-0.1 P
1210 (3225)
3.2 ±0.3 2.5 ±0.2 0.95 ±0.1 C
0.75±0.25
1.25 ±0.1 D
3.2 ±0.4 2.5 ±0.3
1.6 ±0.2 G
2 ±0.2 K
2.5 ±0.3 M
Remark: Reow soldering only is recommended
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
General Electrical Data:
Dielectric X7R X5R
Size 0402, 0603, 0805, 1206, 1210
Capacitance range* 0.56µF to 10µF 0.027µF to 22µF
Capacitance tolerance** K (±10%), M (±20%)
Rated voltage (WVDC) 6.3V, 10V, 16V, 25V, 50V, 100V
Tan δ* Note 1
Insulation resistance at Ur R × C ≥500Ω × F
Operating temperature -55°C to +125°C -55°C to +85°C
Capacitance characteristic ±15%
Termination Ni/Sn (lead-free termination)
* Measured at 1 ±0.2Vrms, 1kHz ±10% for C≤10µF; 0.5 ±0.2Vrms, 120Hz ±20% for C>10µF, 30~70% related humidity,
25°C ambient temperature for X7R, X5R.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150 ±10°C for 1 hour, then leave in a mbient condition
for 24 ±2 hours before measurement.
Rated
vol. D.F.%Exception of D.F. %
^50V %2.5%
%3% 0201(50V); 0603^0.047µF;
0805^0.18µF;1206^0.47µF
%5% 1210^4.7µF
%10% 0603^1µF; 0805^1µF;1206^4.7µF;
1210^10µF
35V %3.5% %10% 0805≥2.2µF; 1210^10µF
25V %3.5%
%5% 0201^0.01µF;0805^1µF; 1210^10µF
%7% 0603^0.33µF; 1206^4.7µF
%10% 0402^0.10µF;0603^0.47µF; 0805^2.2µF;
1206^6.8µF ; 1210^22µF
16V %3.5%
%5% 0201^0.01µF;0402^0.033µF;
0805^0.68µF;1206^2.2µF;1210^4.7µF
%10% 0402^0.22uF; 0603^0.68µF;0805^2.2µF;
1206^4.7µF; 1210^22µF; TT series
10V %5%
%10%
0201^0.012µF;0402^0.33µF;0603^0.33
µF; 0805^2.2µF
1206^2.2µF;1210^22µF; TT series
%15% 0201^0.1µF; 0402^1µF
6.3V %10%
%15%
0201^0.1µF;0402^1µF;0603^10µF;
0805^4.7µF;
1206^47µF :1210^100µF
%20% 0402^2.2µF
4V %15% --- ---
Note 1:
X7R/X5R
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Dielectric X7R
Size 0603 0805 1206 1210
Rated Voltage
V DC 6.3 10 16 6.3 10 16 25 6.3 10 16 25 50 100 10 16 25 50 100
Capacitance
0.56µF (564) X X
0.68µF (684) X X
0.82µF (824) X X
1.0µF (105) X X X D D D J J J P P D D D D K
1.5µF (155) I I I J J J P M
2.2µF (225) I I I I J J J P K G M
3.3µF (335) P P P
4.7µF (475) P P P P K K
6.8µF (685)
10µF (106) P P K K K
Capacitance Range:
X7R Dielectric
Dielectric X5R
Size 0402 0603 0805 1206 1210
Rated Voltage (V DC) 6.3 10 16 25 6.3 10 16 25 6.3 10 16 25 6.3 10 16 25 10 16
Capacitance
0.027µF (273) N
0.033µF (333) N
0.039µF (393) N
0.047µF (473) N
0.056µF (563) N N
0.068µF (683) N N
0.082µF (823) N N N
0.10µF (104) N N N N
0.15µF (154) N
0.22µF (224) N N N X X
0.27uF (274) X X
0.33µF (334) N N X X X X
0.39µF (394) X X
0.47µF (474) N N X X X
0.68µF (684) N N X X X
0.82uF (824) X X X
1.0µF (105) N N X X X X D D
X5R Dielectric
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
X5R Dielectric
Dielectric X5R
Size 0402 0603 0805 1206 1210
Rated Voltage (V DC) 6.3 10 16 25 6.3 10 16 25 6.3 10 16 25 6.3 10 16 25 10 16
Capacitance
1.5µF (155) X I I J J K K
2.2µF (225) X X X I I I I J J P K K
3.3µF (335) X I I I I P P P
4.7µF (475) X I I I I P P P P K K
6.8uF (685) P P
10µF (106) I I I P P P P K K
22µF (226) P P M
Size Thickness (mm) / Symbol Paper tape Plastic tape
7” reel 13” reel 7” reel 13” reel
0402 (1005) 0.5 ±0.05 N 10k 50k - -
0603 (1608) 0.8 ±0.07 S 4k 15k - -
0.8 +0.15/-0.1 X 4k 15k - -
0805 (2012)
0.8 ±0.1 B 4k 15k - -
1.25 ±0.1 D - - 3k 10k
1.25 ±0.2 I - - 3k 10k
1206 (3216)
0.95 ±0.1 C - - 3k 10k
1.15 ±0.15 J - - 3K 10K
1.25 ±0.1 D - - 3k 10k
1.6 ±0.2 G - - 2k 10k
1.6 +0.3/-0.1 P - - 2k 9k
1210 (3225)
0.95 ±0.1 C - - 3k 10k
1.25 ±0.1 D - - 3k 10k
1.6 ±0.2 G - - 2k -
2 ±0.2 K - - 1k 6k
2.5 ±0.3 M - - 1k 6k
Packaging Style and Quantity:
www.element14.com
www.farnell.com
www.newark.com
Page <5> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Electrical Characteristics:
Typical Impedance/ESR vs. Frequency
ESR and IZI vs. frequency (1206 × 106_10V) ESR and IZI vs. frequency (0805F106_10V)
ESR and IZI vs. frequency (0805F475_10V) ESR and IZI vs. frequency (0603 ×105_10V
www.element14.com
www.farnell.com
www.newark.com
Page <6> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
1Visual and
Mechanical -No remarkable defect.
Dimensions to conform to individual specication sheet.
2 Capacitance
Class I: NP0
Cap≤1,000pF 1 ±0.2Vrms, 1MHz±10%
Cap>1,000pF 1 ±0.2Vrms, 1KHz±10%
Class II: X7R,X7E, X5R,Y5V
Cap≤10μF, 1 ±0.2Vrms, 1kHz±10%
Cap>10μF, 0.5±0.2Vrms, 120Hz±20%
Test condition: 0.5±0.2Vrms,
1kHz±10%
X7R: 0603^225(10V),
0805=106(6.3V&10V)
X5R: 01R5^103, 0201^224 (6.3V),
0402^475 (6.3V), 0402^225(10V),
0603=106 (6.3V)
Shall not exceed the limits given in the detailed spec.
3
Q/ D.F.
(Dissipation
Factor)
NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C
X7R, X5R:
Related
Vol. D.F.%Exception of D.F.%
^50V %2.5%
%3% 0201(50V); 0603^0.047μF;0805
^0.18μF;1206^0.47μF
%5% 1210^4.7μF
%10%
0603^1μF;
0805^1μF;1206^4.7μF;
1210^10μF
35V %3.5% %10% 0805≥2.2μF; 1210^10μF
25V %3.5%
%5% 0201^0.01μF;0805^1μF;
1210^10μF
%7% 0603^0.33μF; 1206^4.7μF
%10%
0402^0.1μF;0603^0.47μF;
0805^2.2μF; 1206^6.8μF ;
1210^22μF ; TT series
16V %3.5%
%5%
0201^0.01μF;0402^0.033μF;
0805^0.68μF;1206^2.2μF;12
10^4.7μF
%10%
0402^ 0.22uF;
0603^0.68μF;0805^2.2μF;
1206^4.7μF; 1210^22μF; TT
series
10V %5%
%10%
0201^0.012μF;0402^0.33μF
;0603^0.33μF; 0805^2.2μF
1206^2.2μF;1210^22μF; TT
series
%15% 0201^0.1μF; 0402^1μF
6.3V %10%
%15%
0201^0.1μF;0402^1μF;
|0603^10μF; 0805^4.7μF;
1206^47μF :1210^100μF;
%20% 0402^2.2μF
4V %15% - -
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <7> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
4Dielectric
Strength
To apply voltage (≤100V) 250%.
Duration: 1 to 5 sec.
Charge and discharge current less
than 50mA.
No evidence of damage or ash over during test.
5Insulation
Resistance
To apply rated voltage for max. 120
sec.
10GΩ or RxC^500Ω-F whichever is smaller.
Class II (X7R, X5R)
Rated voltage Insulation Resistance
100V: X7R
10G or
RxC^100Ω-F
whichever is
smaller.
50V:0603≥1μF;0805≥1μF;1206≥4.7μF;
1210≥4.7μF
35V:0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μ
F;1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2
μF;1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥0.
47μF;0805≥2.2μF;
1206≥4.7μF;1210≥47μF
6.3V ; 4V
6Temperature
Coefcient
With no electrical load.
T.C. Operating Temp.
NPO -55~125°C at 25°C
X7R -55~125°C at 25°C
X5R -55~ 85°C at 25°C
T.C. Capacitance Change
NPO Within ±30ppm/°C
X7R Within ±15%
X5R Within ±15%
7
Adhesive
Strength of
Termination
Pressurizing force:
5N (≤0603) and 10N (>0603)
Test time: 10±1 sec.
No remarkable damage or removal of the terminations.
8Vibration
Resistance
Vibration frequency: 10~55 Hz/min.
Total amplitude: 1.5mm
Test time: 6 hrs. (Two hrs each in three
mutually perpendicular directions.)
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change and Q/D.F.: To meet initial spec.
9 Solderability Solder temperature: 235±5°C
Dipping time: 2±0.5 sec. 95% min. coverage of all metalized area.
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <8> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
10 Bending
Test
The middle part of substrate shall be
pressurized by means of the
pressurizing rod at a rate of about
1 mm per second until the deection
becomes 1 mm and then the pressure
shall be maintained for 5±1 sec.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±5% or 0.5pF whichever is larger
X7R, X5R: within ±12.5%
Y5V: within ±30%
(This capacitance change means the change of capacitance
under specied exure of substrate from the capacitance
measured before the test.)
11
Resistance
to Soldering
Heat
Solder temperature: 260±5°C
Dipping time: 10±1 sec
Preheating: 120 to 150°C for 1
minute before immerse the capacitor in
a eutectic solder.
Before initial measurement (Class
II only): Perform 150+0/-10°C for 1
hr and then set for 24±2 hrs at room
temp.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R: within ±7.5%
Q/D.F., I.R. and dielectric strength: To meet initial requirements.
25% max. leaching on each edge.
12 Temperature
Cycle
Conduct the ve cycles according to
the temperatures and time.
Step Temp. (°C) Time (min.)
1Min. operating
temp. +0/-3 30±3
2 Room temp. 2~3
3Max. operating
temp. +3/-0 30±3
4 Room temp. 2~3
Before initial measurement (Class II
only): Perform 150+0/-10°C for 1 hr
and then set for 24±2 hrs at r oom
temp.
Measurement to be made after keep-
ing at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R: within ±7.5%
Q/D.F., I.R. and dielectric strength: To meet initial requirements.
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <9> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
13
Humidity
(Damp Heat)
Steady State
Test temp.: 40±2°C
Humidity: 90~95% RH
Test time: 500+24/-0hrs.
Before initial measurement (Class II
only): Perform 150+0/-10°C for 1 hour
and then set for 24±2 hrs at room
temp.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±5% or 0.5pF whichever is larger
X7R, X7E, X5R: ≥10V**,within ±12.5%;6.3V within ±25%;
10V:0603^4.7μF;0402^1μF;0201^0.1μF, within ±25%;
Q/D.F. value:
NP0: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C
Less than 10pF Q≥200+10C
X7R, X5R
Related
Vol.
D.F.%Exception of D.F. %
^50V %3% %6% 0201(50V);0603^0.047μF;
0805^0.18μF; 1206^0.47μF
%10% 1210^4.7μF
%20% 0603^1μF;
0805^1μF;1206^4.7μF;
1210^10μF
35V %5% %20% 0805≥2.2μF;1210^10μF
25V %5% %10% 0201^0.01μF;0805^1μF;
1210^10μF
%14% 0603^0.33μF;1206^4.7μF
%15% 0402^0.10μF;0603^0.47μF;
0805^2.2μF;1206^6.8μF;
1210^22μF
16V %5% %10% 0603^0.15μF;0805^0.68μF;
1206^2.2μF;1210^4.7μF
%15% 0201^0.01μF;0402^0.033μF;
0603^0.68μF;0805^2.2μF;
1206^4.7μF; 1210^22μF
10V %7.5% %15% 0201^0.012μF;0402^0.33μF;
0603^0.33μF; 0805^2.2μF;
1206^2.2μF; 1210^22μF
%20% 0201^0.1μF ;0402^1μF
6.3V %15% %30% 0201^0.1μF;0402^1μF;
0603^10μF; 805^4.7μF;
1206^47μF;1210^100μF
4V %20% - -
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <10> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
13
Humidity
(Damp Heat)
Steady State
Test temp.: 40±2°C
Humidity: 90~95% RH
Test time: 500+24/-0hrs.
Before initial measurement (Class II
only): Perform 150+0/-10°C for 1 hour
and then set for 24±2 hrs at room
temp.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
I.R.: ≥10V, 1G or 50 -F whichever is smaller.
Class II (X7R, X5R)
Rated voltage Insulation
Resistance
100V: X7R 1GΩ or
RxC ^10Ω
-F which-
ever is
smaller.
50V:0603≥1μF;0805≥1μF;1206≥4.7μF;1210≥4.
7μF
35V:0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;1206≥
10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥
0.47μF;0805≥2.2μF; 1206≥4.7μF;1210≥47μF
6.3V ; 4V
14
Humidity
(Damp Heat)
Load
Test temp.: 40±2°C
Humidity: 90~95%RH
Test time: 500+24/-0 hrs.
To apply voltage: rated voltage.
Before initial measurement (Class II
only): To apply test voltage for 1hr at
40°C and then set for 24±2 hrs at room
temp.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: ±7.5% or 0.75pF whichever is larger.
X7R, X5R: ≥10V, within ±12.5%;6.3V within ±25%;
10V:0603^4.7μF;0402^1μF;0201^0.1μF, within ±25%;
Q/D.F. value:
NP0: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <11> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
14
Humidity
(Damp Heat)
Load
X7R, X5R
Related
Vol.
D.F.%Exception of D.F. %
^50V %3%
%6% 0201(50V);0603^0.047μF;
0805^0.18μF; 1206^0.47μF
%10% 1210^4.7μF
%20% 0603^1μF; 0805^1μF;1206^4.7μF;
1210^10μF
35V %5% %20% 0805≥2.2μF;1210^10μF
25V %5%
%10% 0201^0.01μF;0805^1μF; 1210^10μF
%14% 0603^0.33μF;1206^4.7μF
%15%
0402^0.10μF;0603^0.47μF;0805^2.
2μF;1206^6.8μF;
1210^22μF
16V %5%
%10% 0603^0.15μF;0805^0.68μF;1206^2.
2μF;1210^4.7μF
%15%
0201^0.01μF;0402^0.033μF;0603^0
.68μF;0805^2.2μF;
1206^4.7μF; 1210^22μF
10V %7.5%
%15%
0201^0.012μF;0402^0.33μF;
0603^0.33μF; 0805^2.2μF;
1206^2.2μF; 1210^22μF
%20% 0201^0.1μF ;0402^1μF
6.3V %15% %30%
0201^0.1μF;0402^1μF;
0603^10μF; 805^4.7μF;
1206^47μF;1210^100μF
4V %20% - -
I.R.: ≥10V, 500MΩ or 25Ω-F whichever is smaller.
Class II (X7R, X5R)
Rated voltage Insulation
Resistance
100V: X7R 500MΩ or
RxC^5Ω-F
whichever is
smaller.
50V:0603≥1μF;0805≥1μF;1206≥4.7μF;
1210≥4.7μF
35V:0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;
1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥
0.47μF;0805≥2.2μF;
1206≥4.7μF;1210≥47μF
6.3V ; 4V
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <12> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
15
High
Temperature
Load
(Endurance)
Test temp.:
NP0, X7R: 125±3°C
X5R: 85±3°C
Test time: 1000+24/-0 hrs.
To apply voltage:
(1) 6.3V or C^10μF or TT series:
150% of rated voltage.
(2) 10V^Ur<500V:
200% of rated voltage.
(3) 500V: 150% of rated voltage.
(4) Ur^630V:
120% of rated voltage.
(5) 100% of rated voltage for
below range.
Size Dielectric Rated
voltage
Capaci-
tance range
0201 X5R/X7R 6.3V,10V C^0.1μF
0402 X5R/X7R 6.3V,10V C^1.0μF
0603 X5R/X7R 6.3V,10V C^4.7μF
0805 X5R/X7R 6.3V C^22μF
1206 X5R/X7R 6.3V C^47μF
NP0 3000V C^1.5pF
(6) 150% of rated voltage for below
range.
Size Dielectric Rated
voltage
Capaci-
tance range
0402 X5R/X7R 10V,16V,
25V C^0.22μF
0603 X5R/X7R 10V,16V C^1.0μF
0805 X5R/X7R 10V C^4.7μF
* Before initial measurement (Class II
only): To apply test voltage for 1hr at
test temp. and then set for 24±2 hrs at
room temp.
* Measurement to be made after
keeping at room temp. for 24±2 hrs
No remarkable damage.
Cap change:
NP0: ±3.0% or ±0.3pF whichever is larger
X7R, X5R: ≥10V, within ±12.5%;6.3V within ±25%;
10V:0603^4.7μF;0402^1μF;0201^0.1μF, within ±25%;
Q/D.F. value:
NP0: More than 30pF, Q≥350
10pF≤C<30pF, Q≥275+2.5C
Less than 10pF, Q≥200+10C
X7R, X5R:
Related
Vol.
D.F.%Exception of D.F. %
^50V %3%
%6% 0201(50V);0603^0.047μF;
0805^0.18μF; 1206^0.47μF
%10% 1210^4.7μF
%20%
0603^1μF;
0805^1μF;1206^4.7μF;
1210^10μF
35V %5% %20% 0805≥2.2μF;1210^10μF
25V %5%
%10% 0201^0.01μF;0805^1μF;
1210^10μF
%14% 0603^0.33μF;1206^4.7μF
%15%
0402^0.10μF;0603^0.47μF;0805
^2.2μF;1206^6.8μF;
1210^22μF
16V %5%
%10% 0603^0.15μF;0805^0.68μF;1206
^2.2μF;1210^4.7μF
%15%
0201^0.01μF;0402^0.033μF;
0603^0.68μF;0805^2.2μF;
1206^4.7μF; 1210^22μF
10V %7.5%
%15%
0201^0.012μF;0402^0.33μF;
0603^0.33μF; 0805^2.2μF;
1206^2.2μF; 1210^22μF
%20% 0201^0.1μF ;0402^1μF
6.3V %15% %30%
0201^0.1μF;0402^1μF;
0603^10μF; 805^4.7μF;
1206^47μF;1210^100μF
4V %20% - -
Reliability Test Conditions and Requirements:
www.element14.com
www.farnell.com
www.newark.com
Page <13> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
No Item Test Condition Requirements
15
High
Temperature
Load
(Endurance)
I.R.: ≥10V, 1G or 50 -F whichever is smaller.
Class II (X7R, X5R)
Rated voltage Insulation
Resistance
100V: X7R 500MΩ or
RxC^5Ω-F
whichever is
smaller.
50V:0603≥1μF;0805≥1μF;1206≥4.7μF;
1210≥4.7μF
35V:0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;
1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥
0.47μF;0805≥2.2μF;
1206≥4.7μF;1210≥47μF
6.3V ; 4V
Reliability Test Conditions and Requirements:
Appendixes
Tape & Reel Dimensions
The dimension of paper tape The dimension of plastic tape
Size 0402 0603 0805 1206
Thickness N S, X A B C, D, I B C, J, D G,P
A00.62±0.05 1.02±0.05 1.5±0.1 1.5±0.1 <1.57 2±0.1 <1.85 <1.95
B01.12±0.05 1.8±0.05 2.3±0.1 2.3±0.1 <2.4 3.5±0.1 <3.46 <3.67
T0.6±0.05 0.95±0.05 0.75±0.05 0.95±0.05 0.23±0.05 0.95±0.05 0.23±0.05 0.23±0.05
K0- - - - <2.5 -<2.5 <2.5
W8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1
P04±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1
10 × P040±0.1 4±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1
P12±0.05 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1
www.element14.com
www.farnell.com
www.newark.com
Page <14> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Size 1210
Thickness C, D G, K M
A0<2.97 <2.97 <2.97
B0<3.73 <3.73 <3.73
T0.23±0.05 0.23±0.05 0.23±0.05
K0<2.5 <2.5 <3
W8±0.1 8±0.1 8±0.1
P04±0.1 4±0.1 4±0.1
10 × P040±0.1 40±0.1 40±0.1
P14±0.1 4±0.1 4±0.1
P22±0.05 2±0.05 2±0.05
D01.5±0.05 1.5±0.05 1.5±0.05
D11±0.1 1±0.1 1±0.1
E1.75±0.1 1.75±0.1 1.75±0.1
F3.5±0.05 3.5±0.05 3.5±0.05
Size 0402, 0603, 0805, 1206, 1210
Reel size 7” 10” 13”
C 13+0.5/-0.2 13+0.5/-0.2 13+0.5/-0.2
W1 8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0
A 178±0.1 250±1 330±1
N 60+1/-0 100±1 100±1
Size 0402 0603 0805 1206
Thickness N S, X A B C, D, I B C, J, D G,P
P22±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05
D01.55±0.05 1.55±0.05 1.55±0.05 1.55±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05
D1- - - - 1±0.1 - 1±0.1 1±0.1
E1.75±0.05 1.75±0.05 1.75±0.05 1.75±0.05 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1
F3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05
www.element14.com
www.farnell.com
www.newark.com
Page <15> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Constructions:
No. Name X7R, X5R
1 Ceramic material BaTiO3 based
2 Inner electrode Ni
3
Termination
Inner layer Cu
4 Middle layer Ni
5 Outer layer Sn (Matt)
Storage and handling conditions:
(1) To store products at 5 to 40 C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension
is needed.
Cautions:
a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the
capacitors in the ambience of corrosive gas (e.g., hydrogen sulde, sulfur dioxide, chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the
solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition.
To store products on the shelf and avoid exposure to moisture.
Recommended soldering conditions:
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against
lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N2 within oven are recommended.
www.element14.com
www.farnell.com
www.newark.com
Page <16> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Description Part Number
Capacitor, MLCC, 2.2UF, 6.3V, X5R, 0402, Reel MC000404
Capacitor, MLCC, 2.2UF, 6.3V, X7R, 0603, Reel MC000497
Capacitor, MLCC, 2.2UF, 6.3V, X5R, 0603, Reel MC000499
Capacitor, MLCC, 4.7UF, 6.3V, X5R, 0603, Reel MC000500
Capacitor, MLCC, 1UF, 16V, X7R, 0603, Reel MC000504
Capacitor, MLCC, 2.2UF, 10V, X5R, 0603, Reel MC000513
Capacitor, MLCC, 4.7UF, 10V, X5R, 0603, Reel MC000515
Capacitor, MLCC, 1UF, 25V, X7R, 0805, Reel MC000548
Capacitor, MLCC, 2.2UF, 25V, X7R, 0805, Reel MC000551
Capacitor, MLCC, 4.7UF, 25V, X5R, 0805, Reel MC000556
Capacitor, MLCC, 4.7UF, 6.3V, X5R, 0805, Reel MC000609
Capacitor, MLCC, 1UF, 16V, X7R, 0805, Reel MC000610
Capacitor, MLCC, 4.7UF, 16V, X7R, 0805, Reel MC000614
Capacitor, MLCC, 4.7UF, 16V, X5R, 0805, Reel MC000617
Capacitor, MLCC, 1UF, 10V, X7R, 0805, Reel MC000618
Capacitor, MLCC, 4.7UF, 10V, X7R, 0805, Reel MC000619
Capacitor, MLCC, 3.3UF, 10V, X5R, 0805, Reel MC000622
Capacitor, MLCC, 4.7UF, 10V, X5R, 0805, Reel MC000623
Capacitor, MLCC, 10PF, 100V, NP0, 1206, Reel MC000624
Capacitor, MLCC, 1UF, 100V, X7R, 1206, Reel MC000639
Capacitor, MLCC, 1UF, 25V, X7R, 1206, Reel MC000656
Capacitor, MLCC, 2.2UF, 25V, X7R, 1206, Reel MC000658
Capacitor, MLCC, 4.7UF, 25V, X7R, 1206, Reel MC000661
Capacitor, MLCC, 4.7UF, 25V, X5R, 1206, Reel MC000664
Capacitor, MLCC, 1UF, 50V, X7R, 1206, Reel MC000681
Capacitor, MLCC, 1UF, 50V, X7R, 1206, Reel MC000682
Capacitor, MLCC, 4.7UF, 50V, X7R, 1206, Reel MC000694
Capacitor, MLCC, 22UF, 6.3V, X5R, 1206, Reel MC000697
Capacitor, MLCC, 1UF, 16V, X7R, 1206, Reel MC000708
Capacitor, MLCC, 2.2UF, 16V, X7R, 1206, Reel MC000710
Capacitor, MLCC, 22UF, 16V, X5R, 1206, Reel MC000713
Capacitor, MLCC, 2.2UF, 10V, X7R, 1206, Reel MC000714
Capacitor, MLCC, 1UF, 100V, X7R, 1210, Reel MC000717
Capacitor, MLCC, 2.2UF, 100V, X7R, 1210, Reel MC000719
Capacitor, MLCC, 1UF, 25V, X7R, 1210, Reel MC000722
Capacitor, MLCC, 2.2UF, 25V, X7R, 1210, Reel MC000724
Capacitor, MLCC, 22UF, 25V, X5R, 1210, Reel MC000727
Part Number Table
www.element14.com
www.farnell.com
www.newark.com
Page <17> V1.012/04/13
Multilayer Ceramic Capacitors
High Capacitance Series
Part Number Table
Description Part Number
Capacitor, MLCC, 4.7UF, 25V, X5R, 1210, Reel MC000728
Capacitor, MLCC, 1UF, 50V, X7R, 1210, Reel MC000730
Capacitor, MLCC, 4.7UF, 50V, X7R, 1210, Reel MC000734
Capacitor, MLCC, 22UF, 6.3V, X5R, 1210, Reel MC000735
Capacitor, MLCC, 47UF, 6.3V, X5R, 1210, Reel MC000736
Capacitor, MLCC, 22UF, 16V, X7R, 1210, Reel MC000739
Capacitor, MLCC, 4.7UF, 16V, X7R, 1210, Reel MC000740
Capacitor, MLCC, 22UF, 16V, X5R, 1210, Reel MC000742
Capacitor, MLCC, 22UF, 10V, X7R, 1210, Reel MC000743
Capacitor, MLCC, 22UF, 10V, X5R, 1210, Reel MC000745
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
