DATEFILEREV BY EDV NO
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE Basic material
Projection
Drawing.- No.
WS-TLT 12x12mm Tact Switch with integrated LED, THT version
440xx67082622
440xx67082622.dft
12-09-21 Jelisarow
SwTLT
2:1
System :Solid Edge V20
WE
eiCan
CAD
Würth Elektronik
eiCan
.x = +/- 0,2
.xx = +/- 0,15
A4
SIZE
Scale - 2:1
This electronic component is designed and developed with the intention for use in general electronics
equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of direct damage or injury to
human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical
circuits that require high safety, reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user before usage.
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial: 100mOHM max.
After Life Test: 2OHM max.
>Insulation Resistance:
min. 100MOHM at 500VDC
>Dielectric Strength:
500VAC for 1 minute
>Stroke:
0.3 ± 0.1 mm
MATERIAL
>Diffuser plate:
PC UL HB
>Actuator:
PA66 UL HB
>Frame
: PA66 UL HB, color Black
>Contact:
Stainless Steel with Ag
>Terminal:
Brass with Ag
>Rubber:
Silicone
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C, 60% RH max.
>Operation condition: -40°C ~ +85°C
>Compliance: ROHS, Reach
HANDLING ADVISE
>ESD prevention methods need to be applicated for manual handling
and processing by machinery
>Resistors for protection are obligator
PACKAGING INFORMATION
>ESD Tray
P.C.B. MOUNTING PLAN
CIRCUIT DIAGRAM
10,16
5,08
5,08
O
1,0
O
1,2
12,0
12,0
10,16
11,0
4,05
8,2
3,3
0,9
5,08 0,8
5,08
0,8
Polarity Mark
(Cathode)
A B
LED SCHEMATIC
Switch
34
PN Force Color of LED Life cycle
440 RS670 82622 220g ± 50gf Red 100.000
440 GS670 82622 220g ± 50gf Green 100.000
440 BS670 82622 220g ± 50gf Blue 100.000
440 YS670 82622 220g ± 50gf Yellow 100.000
DATEFILEREV BY EDV NO
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE Basic material
Projection
Drawing.- No.
WS-TLT 12x12mm Tact Switch with integrated LED, THT version
440xx67082622
440xx67082622.dft
12-09-21 Jelisarow
SwTLT
2:1
System :Solid Edge V20
WE
eiCan
CAD
Würth Elektronik
eiCan
.x = +/- 0,2
.xx = +/- 0,15
A4
SIZE
This electronic component is designed and developed with the intention for use in general
electronics equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of direct damage or injury to
human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical
circuits that require high safety, reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user before usage.
HANDLING ADVISE
1) The solder profile has to be complied with according to the technical reflow /or wave
soldering specification, otherwise no warranty will be sustained
2) All products are supposed to be used before the end of the period of 12 months
based on the product date-code, if not 100% solderability can't be warranted
3) Violation of the technical product specifications such as exceeding the absolute
maximum ratings will be result in the loss of warranty
4) It's also recommended to return the products into the original packaging
5) ESD prevention methods need to be applicated for manual handling and processing
by machinery
6) Resistors for protection are obligatory
Yellow Red bright green green Blue
YS RS VS GS BS
unit
1 Peak wavelength typ. nm 590 650 574
520
468
Dominant Wave length
@IF=20mA
spectral Line Half-width
@IF=20mA
Capacitance
VF=0V;f=1MHZ
Forward voltage typ. V 2 1,95 2,1 3,2 3,2
@IF=20mA max.V 2,5 2,5 2,5 4 4
Reverse current
@VR=5V
7 ESD V 2000 2000 2000 1000 1000
8 Viewing Angle
@20mA 2θ 50% typ
Luminous intensity min. mcd 80 120 20 80 20
@IF=20mA typ. mcd 180 220 50 150 50
10 Material AIGaInP AIGaInP AIGaInP InGaN InGaN
11 lens type water clear water clear water clear water clear water clear
Absolute Maximun Ratings (Ambient Temperature 25C )
Properties Blue & green Red yellow bright green Unit
Power Dissipation 120 75 75 75 mW
Peak Forward current 100 185 175 150 mA
continuous Forward current 30 30 30 30 mA
Reverse voltage 5 5 5 5 V
ESD Threshold / HBM 1000 2000 2000 2000 V
Order code
10
4
5
6
item
2
3 typ.nm 28
35typ.pF
uA
Emitting color
20
20
10
21
100
10
20
15
10
35
100
10
º
9
145145145 145145
470typ.nm 590 630 567 525
