SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 500VAC for 1 minute >Stroke: 0.3 0.1 mm 5,08 O 1,0 O 1,2 TECHNICAL CHARACTERISTICS 5,08 10,16 MATERIAL >Diffuser plate: >Actuator: >Frame: >Contact: >Terminal: >Rubber: P.C.B. MOUNTING PLAN 8,2 12,0 4,05 3,3 0,9 0,8 SOLDERING INFORMATION >Terminal in THT version >Wave soldering 260C 10 sec. max. >Hand soldering under 350C for 3 sec. max Switch Polarity Mark (Cathode) A 5,08 B ENVIRONMENTAL >Storage condition: -40C ~ +85C, 60% RH max. >Operation condition: -40C ~ +85C >Compliance: ROHS, Reach 0,8 5,08 10,16 PC UL HB PA66 UL HB PA66 UL HB, color Black Stainless Steel with Ag Brass with Ag Silicone CIRCUIT DIAGRAM 11,0 12,0 HANDLING ADVISE >ESD prevention methods need to be applicated for manual handling and processing by machinery >Resistors for protection are obligator PACKAGING INFORMATION >ESD Tray LED SCHEMATIC PN 4 3 Scale - 2:1 12-09-21 Name Jelisarow Checked WE eiCan CAD FILE DATE BY EDV NO 220g 50gf 220g 50gf 220g 50gf 220g 50gf Color of LED Life cycle Red Green Blue Yellow 100.000 100.000 100.000 100.000 Basic material Date Drawn REV 440 RS670 82622 440 GS670 82622 440 BS670 82622 440 YS670 82622 GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Projection This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. Force DESCRIPTION SwTLT WS-TLT 12x12mm Tact Switch with integrated LED, THT version Wurth Elektronik eiCan 440xx67082622.dft Scale Drawing.- No. 2:1 440xx67082622 Position SIZE A4 System :Solid Edge V20 item 1 2 3 4 5 6 7 8 9 10 11 Emitting color Order code unit Peak wavelength typ. nm Dominant Wave length @IF=20mA typ.nm spectral Line Half-width typ.nm @IF=20mA Capacitance VF=0V;f=1MHZ typ.pF Forward voltage typ. V @IF=20mA max.V Reverse current uA @VR=5V ESD V Viewing Angle @20mA 2 50% typ Luminous intensity min. mcd @IF=20mA typ. mcd Material lens type HANDLING ADVISE Yellow YS Red RS bright green VS green GS Blue BS 590 650 574 520 468 1) The solder profile has to be complied with according to the technical reflow /or wave soldering specification, otherwise no warranty will be sustained 590 630 567 525 470 2) All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not 100% solderability can't be warranted 20 28 20 35 21 20 2 2,5 35 1,95 2,5 15 2,1 2,5 100 3,2 4 100 3,2 4 10 2000 10 2000 10 2000 10 1000 10 1000 145 145 145 80 180 AIGaInP water clear 120 220 AIGaInP water clear 145 20 50 AIGaInP water clear 80 150 InGaN water clear 3) Violation of the technical product specifications such as exceeding the absolute maximum ratings will be result in the loss of warranty 4) It's also recommended to return the products into the original packaging 5) ESD prevention methods need to be applicated for manual handling and processing by machinery 6) Resistors for protection are obligatory 145 20 50 InGaN water clear Absolute Maximun Ratings (Ambient Temperature 25C ) Properties Power Dissipation Peak Forward current continuous Forward current Reverse voltage ESD Threshold / HBM Blue & green Red 120 100 30 5 1000 yellow 75 185 30 5 2000 bright green 75 175 30 5 2000 75 150 30 5 2000 Unit mW mA mA V V GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Projection This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. Basic material Date Drawn 12-09-21 Name Jelisarow Checked WE eiCan CAD REV FILE DATE BY EDV NO DESCRIPTION SwTLT WS-TLT 12x12mm Tact Switch with integrated LED, THT version Wurth Elektronik eiCan 440xx67082622.dft Scale Drawing.- No. 2:1 440xx67082622 Position SIZE A4 System :Solid Edge V20