32 320-001 Extender Backshell Standard Profile - Rotatable Coupling 320 F S 001 M 16-3 CONNECTOR DESIGNATORS Product Series A-D-F-H-L-S Length - Straight only (1/2 inch increments: e.g. 3 = 1.5 inches) Minimum order length 1.0 inches Connector Designator ROTATABLE COUPLING Angle and Profile L = 90 K = 45 S = Straight Shell Size (Table I) Finish (Table II) Basic Part No. Length .060 (1.52) A Thread Class 2B (Table I) E (Table III) F (Table III) C Typ. (Table I) A Thread - Class 2A (Table I) G (Table III) TABLE II : STANDARD FINISHES H (Table III) GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel Now Available with the "NESTOR" Add "-445" to Specify Glenair's Non-Detent, Spring-Loaded, SelfLocking Coupling. See Back Cover for Complete Finish Information and Additional Finish Options TABLE III: DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 19 18 21 20 23 22 24 25 (c) 2005 Glenair, Inc. G Max .940 (23.9) 1.010 (25.7) 1.070 (27.2) 1.130 (28.7) 1.190 (30.2) 1.240 (31.5) 1.310 (33.3) 1.360 (34.5) 1.540 (39.1) F Max .890 (22.6) .920 (23.4) .942 (23.9) .970 (24.6) .990 (25.1) 1.010 (25.7) 1.040 (26.4) 1.060 (26.9) 1.090 (27.7) E Max .830 (21.1) .860 (21.8) .882 (22.4) .900 (22.9) .930 (23.6) .950 (24.1) .980 (24.9) 1.000 (25.4) 1.030 (26.2) CAGE Code 06324 H Max 1.000 (25.4) 1.070 (27.2) 1.130 (28.7) 1.190 (30.2) 1.250 (31.8) 1.300 (33.0) 1.370 (34.8) 1.420 (36.1) 1.490 (37.8) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Metric dimensions (mm) are indicated in parentheses. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 32 - Page 2 32 320-002 Extender Backshell Standard Profile - Direct Coupling - Straight Only CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S 320 F S 002 M 16-3 Product Series Connector Designator Angle and Profile S = Straight Shell Size (Table I) Finish (Table II) * Conn. Desig. B See Note 2 DIRECT COUPLING Length (1/2 inch increments: e.g. 3 = 1.5 inches) Minimum order length 1.5 inches Basic Part No. Length .060 (1.52) A Thread, Class 2B (Table I) B (Table I) TABLE II : STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options (c) 2005 Glenair, Inc. A Thread Class 2A (Table I) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. 1. Metric dimensions (mm) are indicated in parentheses. 2. When using Connector Designator B refer to pages 18 and 19 for part number development. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 32 - Page 3