MODEL: K17A-0101
17” OPEN FRAME MONITOR SPECIFICATION
Version 1.0
Date 04/12/2013
17” Open Frame Monitor Specification V1.0
We are committed to continuous improvement of the TRu™ Projected Capacitive
Multi-Touch Monitors product designs and performance. This document is therefore
subject to change without notice. Please contact a customer representative to insure
that you have the most current specification. Products are not intended for use in
safety-critical or military/aerospace applications, and customer is responsible for all
legal and regulatory requirements associated with use in such applications.
17” Open Frame Monitor Specification V1.0
TABLE OF CONTENTS
1 GENERAL SPECIFICATIONS .............................................................................................. 1
1.1 Display Specifications ................................................................................................ 1
1.2 Physical Specifications............................................................................................... 2
1.3 Electrical Specifications ............................................................................................. 2
1.4 Touch Specifications .................................................................................................. 2
1.5 Environmental Specifications .................................................................................... 3
1.6 Miscellaneous Specifications ..................................................................................... 3
2 MECHANICAL DRAWINGS ................................................................................................. 4
2.1 Overview Geometry ................................................................................................... 4
2.2 Mounting Geometry ................................................................................................... 4
Page 1 of 5
1 GENERAL SPECIFICATIONS
1.1 DISPLAY SPECIFICATIONS
Characteristic
Value
Comment
LCD Size/Type
17” Diagonal TFT Active Matrix Panel
Aspect Ratio
5:4
Active Area
Horizontal
338.9 mm
Vertical
271.3 mm
Pixel Pitch
Horizontal
.264 mm
Vertical
.264 mm
Panel Resolution
1280 X 1024
Native
Display Modes
VGA 640 X 480 (60/66/70/72/75 Hz)
VGA 720 X 400 (70 Hz)
SVGA 800 X 600 (60/70/72/75 Hz)
XGA 1024 X 768 (60/70/75 Hz)
SXGA 1280 X 1024 (60/70/75 Hz)
Display Color
16.7 Million
6 bits + HI-FRC
Contrast Ratio
1000:1
Brightness
225 nits
Typical
Response Time
5 ms
Typical
Viewing Angle
Horizontal
160°
Typical
Vertical
160°
Video Input
Format
RGB Analog 0.7V peak to peak
Video Sync Format
Separated H&V Sync / Composite Sync /
Sync-on Green
Video Signal Input
D-sub 15 pin female (Analog)
Page 2 of 5
1.2 PHYSICAL SPECIFICATIONS
Characteristic
Value
Comment
Dimensions
Width
See Drawings in
Section 2.1
Height
Depth
Net Weight
4.8 kg
Shipping Weight
7.0 kg
Box Dimensions
Length
Width
Height
1.3 ELECTRICAL SPECIFICATIONS
Characteristic
Value
Comment
Power Supply
DC 12V 4.16A
Power Brick
Included
Power
Consumption
Operating
Typical Value
Sleep
Off
1.4 TOUCH SPECIFICATIONS
Touch Technology
Projected Capacitive
Touch Interface
USB (Type B)
Multi-Touch Support
At least 2 unambiguous points
Maximum Report Rate
75 points per second
OS Supported
Native
Support
Multi-Touch
Windows 7
Single Touch
Windows Vista and Prior Versions of
Windows (HID)
Driver
Support
Multi-Touch
All Windows, Linux (Ubuntu),
Mac OS X, QNX Neutrino RTOS
Page 3 of 5
1.5 ENVIRONMENTAL SPECIFICATIONS
Condition
Specification
Temperature
Operating
0°C ~ +40°C
Storage
-20°C ~ +60°C
Humidity
Operating
20% ~ 80%
Storage
10% ~ 90%
1.6 MISCELLANEOUS SPECIFICATIONS
OSD Keys
Control Key
Power On/Off, Select, Down, Up
OSD Options
Contrast, Brightness, Auto Adjust,
Left/Right, Down/Up
Horizontal Size, Fine, OSD Left/Right,
OSD Down/Up
OSD Timeout, Factory Reset, Language,
RGB, Audio
Remote
Optional remote is available for
controlling all OSD functions
Audio
Not Available in Slim Line Model
Plug & Play
DDC 2B Compatible
Compliance
TUV, CE, UL, CUL, FCC-B, RoHS
Page 4 of 5
2 MECHANICAL DRAWINGS
2.1 OVERVIEW GEOMETRY
Page 5 of 5
2.2 MOUNTING GEOMETRY