Type TE Series
Tyco Electronics is a leading
supplier of standard and custom-
designed power resistors for
industrial, control and general-
purpose applications.
The TE range of Mullite coated
tubular ceramic core resistors have
a corrugated ribbon element for
rapid cooling effect to enable up to
2500W power handling capability.
Designed for heavy duty
machinery, electrical equipment,
motor control etc. requiring stability
and reliability.
Key Features
■Mullite Coated
■Up to 2500W Power
Rating
■Corrugated Ribbon
Element for Rapid
Cooling
■3x Overload for 5
Seconds
■Custom Terminations /
Leads Available
■Flameproof Construction
Applications
■Large Electrical and
Production Machinery
■Load Test Simulation
■Motor Start/Stop Cycles
■Dynamic Braking
■Equipment Discharge
High Power Wire Wound Resistor
Type TE Series
Literature No. 9-1773453-2
Issued: 12-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Characteristics -
Environmental
Temperature Coefficient of Resistance: Within ±440ppm/°C
Rated Power Free Air: 50 to 2500 Watts
Operating Temperature Range -25°C to +225°C
Test Item Specification Test Details
Life (Moisture Load): 40°C 95% RH 1000 hour on-off cycle ΔR ±3.0%
Short Term Overload: 3 x rated wattage, 5 seconds -
Flammability: 16x rated power, 5 minutes No Flames
Insulation Resistance: DC 500V Over 100MΩ
Voltage Resistibility: AC 2500V 1 minute Free of damage or flying arc
Resistor Strength: 200N, 30 seconds Free of visible damage
Terminal Strength: Ual: 45N, 30 seconds Free of visible damage
R ≤ ± (1%R + 0.05Ω)
Test Method-
Electrical
Resistance Range (Ohms) See Resistance Range Chart below
Selection Series E12
Tolerance +/-5%, +/-10% as per Resistance Range Chart below
Type Resistance Value Tolerance
50W R10 – R99 10%
1R0 – 2K7 5%
60W R10 – R99 10%
1R0 – 2K7 5%
80W R10 – R99 10%
1R0 – 2K7 5%
100W 1R0 – 2K7 5%
120W 1R0 – 2K7 5%
150W 1R0 – 2K7 5%
200W 1R0 – 2K7 5%
300W 1R0 – 2K7 5%
400W 1R0 – 2K7 5%
500W 1R0 – 2K7 5%
600W 1R0 – 2K7 5%
750W 1R0 – 2K7 5%
1000W 1R0 – 2K7 5%
1200W 1R0 – 2K7 5%
1500W 1R0 – 2K7 5%
2000W 1R0 – 2K7 5%
2500W 1R0 – 2K7 5%
Specifications-
Electrical
Derating Curve
-55 0 50 100 150 200 250 300 350 400
Ambient Temperature (°C)
100
80
60
40
20
0
Rated Ratio of Power Loss (%)
High Power Wire Wound Resistor
Type TE Series
Literature No. 9-1773453-2
Issued: 12-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Temperature Rise
0 50 100
Load Ratio (%)
400
300
200
100
0
Increase in Temperature (°C)
Rated Dimensions
Power L1 L2 L3 D H1
(W) (±2) (±5) (±3) (±2) B B1 H (±3) N d O
50 102 124 146 28 6.5 28 28 61 10 4.5 1.2
60 102 124 146 28 6.5 28 28 61 10 4.5 1.2
80 152 174 196 28 6.5 28 28 61 10 4.5 1.2
100 182 204 226 28 6.5 28 28 61 10 4.5 1.2
120 182 204 226 28 6.5 28 28 61 10 4.5 1.2
150 195 217 239 40 8 40 41 81 12 5.5 2.0
200 195 217 239 40 8 40 41 81 12 5.5 2.0
300 282 304 326 40 8 40 41 81 12 5.5 2.0
400 282 304 326 40 8 40 41 81 12 5.5 2.0
500 316 338 360 50 8 50 45 101 16 6 2.0
600 345 367 389 40 8 40 41 81 12 5.5 2.0
750 316 338 360 50 8 50 45 101 16 6 2.0
1000 300 325 350 60 8.5 60 60 119 16 6 2.0
1200 415 440 465 60 8.5 60 60 119 16 6 2.0
1500 415 440 465 60 8.5 60 60 119 16 6 2.0
2000 510 535 560 60 8.5 60 60 119 16 6 2.0
2500 600 625 650 60 8.5 60 60 119 16 6 2.0
Dimensions
TE 50 B 1K0 J
Common Part
50 - 50 Watt
60 - 60 Watt
80 - 80 Watt
100 - 100 Watt
etc.
Power Rating
1 ohm
(1000 milliohms)
1R0
10 ohm (10 ohms)
10R
100R ohms
(100 ohms)
100R
1k ohms
(1000 ohms)
1K0
Resistance Value Tolerance
TE - High Power
Wire Wound
Resistor
J - ±5%
K - ±10%
Mounting
A - Without Bracket
B - With Bracket
(Standard)
How to Order
