Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M (Preliminary) High Speed Transistor Optocouplers Features Description High speed -1 MBit/s The HCPL4503M, 6N135M, 6N136M, HCPL2530M and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. Superior CMR - 10kV/s Dual-Channel HCPL2530M, HCPL2531M (Preliminary) CTR guaranteed 0-70C U.L. recognized (File # E90700, Vol. 2) VDE recognition (pending) - Ordering option `V', e.g., 6N135VM 5,000Vrms (1 minute) isolation rating Superior CMR of 15,000V/s min. (HCPL4503M) No base connection for improved noise immunity (HCPL4503M) A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode rejection of up to 50,000V/s. Applications Related Resources Line receivers www.fairchildsemi.com/products/opto/ Pulse transformer replacement www.fairchildsemi.com/pf/HC/HCPL0500.html Output interface to CMOS-LSTTL-TTL www.fairchildsemi.com/pf/FO/FODM452.html Wide bandwidth analog coupling www.fairchildsemi.com/pf/FO/FOD050L.html Schematics N/C 1 Package Outlines 8 VCC + 1 8 8 VCC 1 V F1 + 2 7 VB _ 2 7 V01 V 8 F _ 3 6 VO _ 3 6 V02 8 1 1 V F2 N/C 4 5 GND 6N135M, 6N136M, HCPL4503M + 4 5 GND HCPL2530M/HCPL2531M Pin 7 is not connected in the HCPL4503M (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers January 2010 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Condition Value Units TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +100 C TSOL Lead Solder Temperature (Wave) 260 for 10 sec C IF (avg) DC/Average Forward Input Current Each Channel(1) 25 mA IF (pk) Peak Forward Input Current Each Channel(2) 50% duty cycle, 1ms P.W. 50 mA IF (trans) Peak Transient Input Current Each Channel 1s P.W., 300pps 1.0 A VR Reverse Input Voltage Each Channel 5 V PD Input Power Dissipation Each Channel(3) 45 mW EMITTER 6N135M, 6N136M, HCPL4503M HCPL2530M, HCPL2531M DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage IB Base Current 6N135M and 6N136M only PD Output Power Dissipation Each Channel(4) 6N135M and 6N136M only -0.5 to 20 V 5 mA 6N135M, 6N136M, HCPL4503M 100 mW HCPL2530M, HCPL2531M 35 mW Notes: 1. Derate linearly above 70C free-air temperature at a rate of 0.8mA/C. 2. Derate linearly above 70C free-air temperature at a rate of 1.6mA/C. 3. Derate linearly above 70C free-air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70C free-air temperature at a rate of 2.0 mW/C. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 2 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25C unless otherwise specified) (TA = 0 to 70C unless otherwise specified. Typical value is measured at TA = 25C and VCC = 5.0V.) Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit 1.45 1.7 V EMITTER VF BVR Input Forward Voltage Input Reverse Breakdown Voltage VF/TA Temperature Coefficient of Forward Voltage IF = 16mA, TA =25C All IF = 16mA All IR = 10 A All IF = 16mA 1.8 5.0 21 V All -1.7 mV/C IF = 0mA, VO = VCC = 5.5V, TA =25C All 0.0007 0.5 IF = 0mA, VO = VCC = 15V, TA =25C 6N135M 6N136M HCPL4503M 0.0019 1 163 200 DETECTOR IOH Logic High Output Current IF = 0mA, VO = VCC = 15V ICCL ICCH Logic Low Supply Current Logic High Supply Current (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 All A 50 IF = 16mA, VO = Open, VCC = 15V 6N135M 6N136M HCPL4503M IF1 = IF2 = 16mA, VO = Open, VCC = 15V HCPL2530M HCPL2531M IF = 0mA, VO = Open, VCC = 15V, TA =25C 6N135M 6N136M HCPL4503M 0.0002 1 IF = 0mA, VO = Open, VCC = 15V 6N135M 6N136M HCPL4503M 0.0004 2 IF = 0mA, VO = Open, VCC = 15V HCPL2530M HCPL2531M A 400 A 4 www.fairchildsemi.com 3 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit 6N135M 7 38 50 % 19 38 50 % COUPLED CTR Current Transfer Ratio(5) IF = 16mA, VO = 0.4 V, VCC = 4.5V, TA =25C HCPL2530M 6N136M HCPL4503M HCPL2531M IF = 16mA, VCC = 4.5V VOL Logic LOW Output Voltage VOL = 0.4V 6N135M VOL = 0.5V HCPL2530M VOL = 0.4V 6N136M HCPL4503M VOL = 0.5V HCPL2531M 6N135M IF = 16mA, IO = 1.1mA, VCC = 4.5V, TA =25C HCPL2530M IF = 16mA, IO = 3mA, VCC = 4.5V, TA =25C 6N136M HCPL4503M 5 % 15 % 0.12 6N135M V 0.5 0.20 HCPL2531M IF = 16mA, IO = 0.8mA, VCC = 4.5V 0.4 0.4 0.5 0.11 0.5 0.18 0.5 HCPL2530M IF = 16mA, IO = 2.4mA, VCC = 4.5V HCPL4503M HCPL2531M Note: 5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 4 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified. Typical value is measured at TA = 25C and VCC = 5.0V.) (Continued) (TA = 0 to 70C unless otherwise specified. Typical values are measured at TA = 25C and VCC = 5V.) Switching Characteristics (VCC = 5V) Symbol Parameter tPHL Propagation Delay Time to Logic LOW Test Conditions Device Min. 6N135M TA = 25C, RL = 4.1k, IF = 16mA(6) (Fig. 7) HCPL2530M RL = 1.9k, IF = 16mA, TA = 25C(7) (Fig. 7) 6N136M HCPL4503M Typ. Max. Unit 0.23 1.5 s 0.25 0.8 s HCPL2531M tPLH Propagation Delay Time to Logic HIGH RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 2.0 s RL = 1.9k, IF = 16mA(7) (Fig. 7) 6N136M HCPL4503M HCPL2531M 1.0 s 0.45 1.5 s 0.26 0.8 s 6N135M TA = 25C, (RL = 4.1k, IF = 16mA(6) (Fig. 7) HCPL2530M RL = 1.9k, IF = 16mA(7) (Fig. 7) TA = 25C 6N136M HCPL4503M HCPL2531M RL = 4.1k, IF = |CMH| |CML| Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low 16mA(6) (Fig. 7) 6N135M HCPL2530M 2.0 s RL = 1.9k, IF = 16mA(7) (Fig. 7) 6N136M HCPL4503M HCPL2531M 1.0 s IF = 0mA, VCM = 10VP-P, RL = 4.1k, TA = 25C(8) (Fig. 8) 6N135M HCPL2530M 10,000 V/s IF = 0mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) 6N136M HCPL2531M 10,000 V/s IF = 0mA, VCM = 1,500VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) HCPL4503M IF = 16mA, VCM = 10VP-P, RL = 4.1k, TA = 25C(8) (Fig. 8) 6N135M HCPL2530M 10,000 V/s IF = 16mA, VCM = 10VP-P, RL = 1.9k(8) (Fig. 8) 6N136M HCPL2531M 10,000 V/s IF = 0mA, VCM = 1,500VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) HCPL4503M 15,000 15,000 50,000 50,000 Notes: 6. The 4.1k load represents 1 LSTTL unit load of 0.36mA and 6.1k pull-up resistor. 7. The 1.9k load represents 1 TTL unit load of 1.6mA and 5.6k pull-up resistor. 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 5 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified. Typical values are measured at TA = 25C and VCC = 5V.) Isolation Characteristics (TA = 0 to 70C Unless otherwise specified) Symbol Characteristics Test Conditions Min. 5,000 VISO Withstand Insulation Test Voltage RH 50%, TA = 25C, II-O 10A, t = 1 min., f = 50Hz(9)(11) RI-O Resistance (Input to Output) VI-O = 500VDC(9) CI-O Capacitance (Input to Output) f = 1MHz, VI-O = 0V(9) Typ. Max. Unit VRMS 1011 1 pF II-I Input-Input Insulation Leakage Current RH 45%, VI-I = t = 5 s, (HCPL2530M/2531M only) A RI-I Input-Input Resistance VI-I = 500 VDC(10) (HCPL2530M/2531M only) CI-I Input-Input Capacitance f = 1MHz(10) (HCPL2530M/2531M only) pF 500VDC(10) Notes: 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. 11. 5,000Vrms for 1 minute duration is equivalent to 6,000Vrms for 1 second duration. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 6 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics Fig. 2 Normalized CTR vs. Temperature CTR (NORMALIZED) CTR(TA) / CTR (TA = 16mA) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16mA) Fig. 1 Normalized CTR vs. Forward Current 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 IF - FORWARD CURRENT (mA) IOH - LOGIC HIGH OUTPUT CURRENT (nA) IO - OUTPUT CURRENT (mA) IF = 40mA 20 35mA 30mA 15 25mA 20mA 10 15mA 10mA 5 5mA 0 2 4 6 8 10 12 40 60 80 100 120 100 120 Fig. 4 Logic High Output Current vs. Temperature 25 0 20 TA - TEMPERATURE (C) Fig. 3 Output Current vs. Output Voltage TA = 25C VCC = 5 V IF = 16mA VCC = 4.5V VO = 0.4V Normalized to: TA = 25C 14 16 18 1000 IF = 0 mA VCC = 5.5V VO = 5.5V 100 10 1 0.1 -40 20 -20 0 20 40 60 80 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 Propagation Delay vs. Temperature 800 Frequency = 10kHz Duty Cycle = 10% VCC = 5V RL = 4.1k (tPLH) TP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 700 600 500 RL = 1.9k (tPLH) 400 RL = 1.9k (tPHL) 300 RL = 4.1k (tPHL) 200 100 0 -40 Frequency = 10kHz Duty Cycle = 10% VCC = 5 V 1000 IF = 16mA (tPLH) IF = 10mA (tPLH) IF = 10mA (tPHL) IF = 16mA (tPHL) 100 -20 0 20 40 60 80 100 120 1 TA - TEMPERATURE (C) (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 7 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Typical Performance Curves Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s 1 Noise Shield 8 + 2 7 VF - VCC VB Pulse Generator tr = 5ns Z O = 50 +5 V 10% DUTY CYCLE I/f < 100S RL Noise Shield + 1 8 VCC +5 V RL VF1 - 7 2 V01 VO C L = 15 pF 3 6 VO - VO IF MONITOR 0.1 F I F Monitor 4 Rm IF 5 Rm C L = 15 pF GND 3 6 4 5 VF2 + V02 0.1 F GND Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 7 Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 F VFF 4 5 + GND VF2 + - V02 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 8 Common Mode Immunity Test Circuit (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 8 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Test Circuits Through Hole 0.4" Lead Spacing (Option T) PIN 1 ID. 4 3 2 PIN 1 ID. 1 4 3 2 1 0.270 (6.86) 0.250 (6.35) 5 6 7 0.270 (6.86) 0.250 (6.35) 8 5 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 7 8 0.390 (9.91) 0.370 (9.40) 0.020 (0.51) MIN 0.200 (5.08) MAX 6 0.156 (3.94) 0.144 (3.68) 0.070 (1.78) 0.045 (1.14) SEATING PLANE SEATING PLANE 0.390 (9.91) 0.370 (9.40) 0.156 (3.94) 0.070 (1.78) 0.144 (3.68) 0.045 (1.14) 0.020 (0.51) MIN 0.200 (5.08) MAX 15 MAX 0.016 (0.40) 0.008 (0.20) 0.154 (3.90) 0.120 (3.05) 0.300 (7.62) TYP 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.016 (0.40) 0.008 (0.20) 0.100 (2.54) TYP 0.031 (0.78) Surface Mount - 0.3" Lead Spacing (Option S) 0 to 15 0.400 (10.16) TYP 8-Pin Surface Mount DIP - Land Pattern (Option S) 0.390 (9.91) 0.370 (9.40) 4 3 2 1 0.070 (1.78) PIN 1 ID. 0.060 (1.52) 0.270 (6.86) 0.250 (6.35) 5 6 7 0.100 (2.54) 8 0.295 (7.49) 0.156 (3.94) 0.144 (3.68) 0.070 (1.78) 0.045 (1.14) 0.020 (0.51) MIN 0.200 (5.08) MAX 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.415 (10.54) 0.300 (7.62) TYP 0.030 (0.76) 0.016 (0.40) 0.008 (0.20) 0.015 (0.40) MIN Both Sides 0.315 (8.00) MIN 0.405 (10.30) MAX. Note: All dimensions are in inches (millimeters) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 9 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Package Dimensions Surface Mount - 0.4" Lead Spacing (Option TS) (Pending) 8-Pin Surface Mount DIP - Land Pattern (Option TS) 0.390 (9.91) 0.370 (9.40) 4 3 2 1 0.070 (1.78) PIN 1 ID. 0.060 (1.52) 0.270 (6.86) 0.250 (6.35) 5 6 7 0.100 (2.54) 8 0.392 (9.96) 0.156 (3.94) 0.144 (3.68) 0.020 (0.51) MIN 0.200 (5.08) MAX 0.511 (13.0) 0.300 (7.62) TYP 0.070 (1.78) 0.045 (1.14) 0.031 (0.775) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.030 (0.76) 0.016 (0.40) 0.008 (0.20) 0.015 (0.40) MIN Both Sides 0.400 (10.16) 0.497 (12.6) MAX. Note: All dimensions are in inches (millimeters) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 10 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Package Dimensions (Continued) Option Example Part Number Description No option 6N135M Standard through hole lead form (50 units per tube) S 6N135SM SD 6N135SDM V 6N135VM TSV 6N135TSVM IEC60747-5-2 (approval pending); surface mount TSDV 6N135TSDVM IEC60747-5-2 (approval pending); surface mount; tape and reel TV 6N135TVM IEC60747-5-2 (approval pending); 0.4" lead spacing SV 6N135SVM IEC60747-5-2 (approval pending); surface mount SDV 6N135SDVM IEC60747-5-2 (approval pending); surface mount; tape and reel Surface mount lead bend Surface mount; tape and reel IEC60747-5-2 (approval pending) Marking Information 1 6N135 XX YY V 3 4 B 2 6 5 Definitions 1 2(1) Fairchild logo Device number 3 IEC60747-5-2 mark (Note: Only appears on parts ordered with this option - See order entry table) 4 Two digit year code, e.g., `08' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code Note: 1. `HCPL' devices are marked with only the numeric characters (for example, HCPL4503M is marked as `4503'). 2. The `M' suffix is an ordering identifier only. It is used to indicated the white package version. The `M' does no appear in the top mark. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 11 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Ordering Information D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 0.3 Tape Thickness 0.30 0.05 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 7.5 0.1 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 12.0 0.1 10.30 0.20 B0 10.30 0.20 K0 4.90 0.20 W1 d R (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 Cover Tape Width 13.2 0.2 Cover Tape Thickness 0.1 max Max. Component Rotation or Tilt 10 Min. Bending Radius 30 www.fairchildsemi.com 12 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Carrier Tape Specifications (Option SD) D0 P0 t K0 P2 E F A0 W1 d P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 24.0 0.3 Tape Thickness 0.40 0.1 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 11.5 0.1 t 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 16.0 0.1 12.80 0.1 B0 10.35 0.1 K0 5.7 0.1 W1 d R (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 Cover Tape Width 21.0 0.1 Cover Tape Thickness 0.1 max Max. Component Rotation or Tilt 10 Min. Bending Radius 30 www.fairchildsemi.com 13 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Carrier Tape Specifications (Option TSR2) (Pending) Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 8 minutes max. www.fairchildsemi.com 14 AccuPower Auto-SPM Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet Series FACT(R) (R) FAST FastvCore FETBench FlashWriter(R)* FPS F-PFS (R) FRFET SM Global Power Resource Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax Motion-SPM OptoHiTTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPM PowerTrench(R) PowerXSTM Programmable Active Droop (R) QFET QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START SPM(R) STEALTH SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 SupreMOS SyncFET Sync-LockTM (R) * The Power Franchise (R) TinyBoost TinyBuck TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TriFault Detect TRUECURRENT * SerDes (R) UHC Ultra FRFET UniFET VCX VisualMax XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I47 (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.6 www.fairchildsemi.com 15 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.