LM160,LM360 LM160/LM360 High Speed Differential Comparator Literature Number: SNOSBJ4B LM160/LM360 High Speed Differential Comparator General Description Features The LM160/LM360 is a very high speed differential input, complementary TTL output voltage comparator with improved characteristics over the A760/A760C, for which it is a pin-for-pin replacement. The device has been optimized for greater speed, input impedance and fan-out, and lower input offset voltage. Typically delay varies only 3 ns for overdrive variations of 5 mV to 400 mV. n n n n n n n n Complementary outputs having minimum skew are provided. Applications involve high speed analog to digital convertors and zero-crossing detectors in disk file systems. Connection Diagrams Guaranteed high speed: 20 ns max Tight delay matching on both outputs Complementary TTL outputs High input impedance Low speed variation with overdrive variation Fan-out of 4 Low input offset voltage Series 74 TTL compatible Dual-In-Line Package Metal Can Package 00570705 00570704 Order Number LM160H/883 (Note 1) See NS Package Number H08C Order Number LM360M, LM360MX or LM360N See NS Package Number M08A or N08E Note 1: Also available in SMD# 5962-8767401 (c) 2004 National Semiconductor Corporation DS005707 www.national.com LM160/LM360 High Speed Differential Comparator August 2000 LM160/LM360 Absolute Maximum Ratings (Notes 6, 8) Storage Temperature Range If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Lead Temperature Positive Supply Voltage +8V Negative Supply Voltage -8V Peak Output Current (Soldering, 10 sec.) Dual-In-Line Package Soldering (10 seconds) 5V ESD Tolerance (Note 9) 1600V -55C to +125C LM360 0C to +70C Vapor Phase (60 seconds) 215C Infrared (15 seconds) 220C See AN-450 "Surface Mounting Methods and Their Effect on Product Reliability" for other methods of soldering surface mount devices. Operating Temperature Range LM160 260C Small Outline Package V+ VIN V- Input Voltage 260C Soldering Information 20 mA Differential Input Voltage -65C to +150C Electrical Characteristics (TMIN TA TMAX) Parameter Conditions Min Typ Max Units Operating Conditions Supply Voltage VCC+ 4.5 5 6.5 V Supply Voltage VCC- -4.5 -5 -6.5 V Input Offset Voltage RS 200 Input Offset Current Input Bias Current 2 5 mV 0.5 3 A 5 20 A Output Resistance (Either Output) VOUT = VOH 100 Response Time TA = 25C, VS = 5V (Notes 2, 7) 13 25 ns TA = 25C, VS = 5V (Notes 3, 7) 12 20 ns TA = 25C, VS = 5V (Notes 4, 7) 14 ns (tpd of +VIN1) - (tpd of -VIN2) TA = 25C (Notes 2, 7) 2 ns (tpd of +VIN2) - (tpd of -VIN1) TA = 25C (Notes 2, 7) 2 ns (tpd of +VIN1) - (tpd of +VIN2) TA = 25C (Notes 2, 7) 2 ns (tpd of -VIN1) - (tpd of -VIN2) TA = 25C (Notes 2, 7) 2 ns f = 1 MHz 17 k Response Time Difference between Outputs Input Resistance Input Capacitance f = 1 MHz 3 pF Average Temperature Coefficient of RS = 50 8 V/C 7 nA/C 4.5 V Input Offset Voltage Average Temperature Coefficient of Input Offset Current Common Mode Input Voltage Range VS = 6.5V 4 5 Differential Input Voltage Range = -320 A, VS = 4.5V Output High Voltage (Either Output) IOUT Output Low Voltage (Either Output) ISINK = 6.4 mA Positive Supply Current Negative Supply Current 2.4 3 V 0.25 0.4 V VS = 6.5V 18 32 mA VS = 6.5V -9 -16 mA Note 2: Response time measured from the 50% point of a 30 mVp-p 10 MHz sinusoidal input to the 50% point of the output. Note 3: Response time measured from the 50% point of a 2 Vp-p 10 MHz sinusoidal input to the 50% point of the output. www.national.com V 2 (Continued) Note 4: Response time measured from the start of a 100 mV input step with 5 mV overdrive to the time when the output crosses the logic threshold. Note 5: Typical thermal impedances are as follows: Cavity DIP (J): jA 135C/W Molded DIP (N): jA 130C/W Header (H) jA jC 165C/W (Still Air) 67C/W (400 LF/min Air Flow) 25C/W Note 6: The device may be damaged if used beyond the maximum ratings. Note 7: Measurements are made in AC Test Circuit, Fanout = 1 Note 8: Refer to RETS 160X for LM160H, LM160J-14 and LM160J military specifications. Note 9: Human body model, 1.5 k in series with 100 pF. Typical Performance Characteristics Input Current vs Ambient Temperature Offset Voltage 00570708 00570709 Supply Current vs Ambient Temperature Input Characteristics 00570711 00570710 3 www.national.com LM160/LM360 Electrical Characteristics LM160/LM360 Typical Performance Characteristics (Continued) Delay of Output 1 With Respect to Output 2 vs Ambient Temperature Propagation Delay vs Ambient Temperature 00570712 00570713 Common-Mode Pulse Response 00570714 AC Test Circuit 00570703 VIN= 50 mV + FANOUT=1 FANOUT=4 V =+5V R=2.4k R=630 V-=-5V C=15 pF C=30 pF www.national.com 4 LM160/LM360 Schematic Diagram 00570701 5 www.national.com LM160/LM360 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM160H/883 NS Package Number H08C www.national.com 6 LM160/LM360 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Molded Dual-In-Line Package (M) Order Number LM360M or LM360MX NS Package Number M08A 7 www.national.com LM160/LM360 High Speed Differential Comparator Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Molded Dual-In-Line Package (N) Order Number LM360N NS Package Number N08E National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated