PACKAGING SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE: TUBE PACKAGING
FOR PICOFLEX SMT
HEADERS
SHEET No.
C EC No: IPG2013-0094 1 of 5
DATE:
18-Sep-12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
9
0814
-
001
D.BYRNES D. Waszkiewicz J. Dennehy
TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC
TABLE OF CONTENTS
SECTION PAGE
1.0 SCOPE. 2
2.0 PURPOSE... 2
3.0 GENERAL.2
4.0 PACKAGING OF STANDARD HEADERS..... 3
5.0 PACKAGING OF LOW-PROFILE HEADERS....... 4
6.0 LABELING....... 5
PACKAGING SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE: TUBE PACKAGING
FOR PICOFLEX SMT
HEADERS
SHEET No.
C EC No: IPG2013-0094 2 of 5
DATE:
18-Sep-12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
9
0814
-
001
D.BYRNES D. Waszkiewicz J. Dennehy
TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC
1.0 SCOPE
This standard specifies the general requirements for the tube packaging of
Picoflex SMT Header Assemblies, series 90814/93405.
2.0 PURPOSE
The purpose of this specification is to assure that all 90814/93405 product
shipped from Molex arrives damage free and in a manner that allows ease of
handling, storage and distribution.
3.0 GENERAL
The shipping weight for a box from Molex should not exceed 15 kg.
The recommended carton closure is tape.
Bubble wrap may be used to fill up excess space in a carton if required.
PACKAGING SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE: TUBE PACKAGING
FOR PICOFLEX SMT
HEADERS
SHEET No.
C EC No: IPG2013-0094 3 of 5
DATE:
18-Sep-12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
9
0814
-
001
D.BYRNES D. Waszkiewicz J. Dennehy
TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC
4.0 PACKAGING OF STANDARD HEADERS
The Standard Headers are packaged in transparent antistatic u.P.V.C. tubes,
part no. 99024-0053.
The tubes are closed on each end with tape stops, part no. 96717-0002. The
tape stops are not to be placed on the face where the tube part number is
printed.
The full tubes are placed in a cardboard carton, part no. 91687-0012, with the
PCB pegs on the header facing upwards. The carton is closed with tape.
See Table 1 for packaging quantities of each circuit size.
See Table 2 for Bill Of Materials for Standard Headers.
TABLE 1
Circuit
Size
Quantity of
Headers per Tube
Quantity of
Headers per Box
Quantity of
Tubes per Box
4 60 6,300
105
6 46 4,830
8 38 3,990
10 32 3,360
12 28 2,940
14 25 2,625
16 22 2,310
18 20 2,100
20 18 1,890
22 16 1,680
24 15 1,575
26 14 1,470
TABLE 2
ITEM
DESCRIPTION PART NUMBER QUANTITY
1 CARTON 91687-0012 1
2 TUBE 99024-0053 105
3 TAPE STOPS 96717-0002 210
4 HEADER 90814/93405-*0**/ -*3** See TABLE 1
PACKAGING SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE: TUBE PACKAGING
FOR PICOFLEX SMT
HEADERS
SHEET No.
C EC No: IPG2013-0094 4 of 5
DATE:
18-Sep-12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
9
0814
-
001
D.BYRNES D. Waszkiewicz J. Dennehy
TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC
5.0 PACKAGING OF LOW-PROFILE HEADERS
The Low-Profile Headers are packaged in transparent antistatic u.P.V.C.
tubes, part no. 99024-0048.
The tubes are closed on each end with tape stops, part no. 96717-0002. The
tape stops are not to be placed on the face where the tube part number is
printed.
The full tubes are placed in a cardboard carton, part no. 91687-0012, with the
PCB pegs on the header facing upwards. The carton is closed with tape.
See Table 3 for packaging quantities of each circuit size.
See Table 4 for Bill Of Materials for Low-Profile Headers.
TABLE 3
Circuit
Size
Quantity of
Headers per Tube
Quantity of
Headers per Box
Quantity of
Tubes per Box
4 60 8,640
144
6 46 6,624
8 38 5,472
10 32 4,608
12 28 4,032
14 25 3,600
16 22 3,168
18 20 2,880
20 18 2,592
22 16 2,304
24 15 2,160
26 14 2,016
TABLE 4
ITEM
DESCRIPTION PART NUMBER QUANTITY
1 CARTON 91687-0012 1
2 TUBE 99024-0048 144
3 TAPE STOPS 96717-0002 288
4 HEADER 90814/93405-*6**/ -8** See TABLE 3
PACKAGING SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE: TUBE PACKAGING
FOR PICOFLEX SMT
HEADERS
SHEET No.
C EC No: IPG2013-0094 5 of 5
DATE:
18-Sep-12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
9
0814
-
001
D.BYRNES D. Waszkiewicz J. Dennehy
TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC
6.0 LABELLING
The labels used are standard Molex Ireland labels and measure 127.0 x 76.2
mm, see example in Fig.1.
The label is placed on the carton.
Fig.1
