Installation Information
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style),
TR-490 (ratchet style) hand tools.
Specialty Terminals
HT-31-10 thru HT-33-10
Standard Fork, High Temperature, Butted Seam
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted
Max. Continuous Temp: 900˚F (482˚C)
Max. Current: Same as Wire
Terminal Material: Steel
Terminal Plating: Nickel
Barrel Crimp (Electrical)
L
EC
W
tcudorP rebmuN
eriW egnaR )GWA( dutS eziSWCLE ssenkcihT lerraB htgneL lerraB .D.I
01-13-TH81-220143.092.007.045.0030.052.0070.0
01-23-TH41-610143.092.007.045.0030.052.0090.0
01-33-TH01-210183.082.037.035.0040.052.0531.0
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
©3M 2002 78-8126-0861-6-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all r isks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the purchase pr ice of the 3M product. Except where prohibited by law, 3M will
not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
3M is a trademark of 3M.
Engineering Specification
Crimp-type terminals shall, electrically and mechnically,
connect to a pre-stripped end of a stranded copper wire
and hav e a flat tongue portion with a central opening for
mounting around a scre w or stud.
.
The non-insulated, butted seam high-temperature standard
fork terminal shall be nickel-plated, annealed steel, with
the tongue having a specif ied stud slot (size 10) and with a
0.250˝ long butted seam barrel ha ving a beveled I.D. for
ease of stranded wire entry, sized for a specified (AWG)
wire range (22-18, 16-14).
