To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. H7N0608LD, H7N0608LS, H7N0608LM Silicon N Channel MOS FET High Speed Power Switching REJ03G0144-0100Z Rev.1.00 Oct.30.2003 Features * Low on-resistance RDS(on) = 6.0 m typ. * Low drive current * Available for 4.5 V gate drive Outline LDPAK D 4 G 1 1 S Rev.1.00, Oct.30.2003, page 1 of 11 2 4 4 2 1 3 2 3 H7N0608LS H7N0608LM 3 H7N0608LD 1. Gate 2. Drain 3. Source 4. Drain H7N0608LD, H7N0608LS, H7N0608LM Absolute Maximum Ratings (Ta = 25C) Item Symbol Ratings Unit Drain to source voltage VDSS 60 V Gate to source voltage VGSS 20 V Drain current ID 70 A Note1 Drain peak current ID (pulse) 280 A Body-drain diode reverse drain current IDR 70 A 40 A Note3 Avalanche current IAP Avalanche energy EARNote3 Channel dissipation Pch Channel temperature Storage temperature 137 mJ 80 W Tch 150 C Tstg -55 to +150 C Notes: 1. PW 10 s, duty cycle 1% 2. Value at Tc = 25C 3. Value at Tch = 25C, Rg 50 Rev.1.00, Oct.30.2003, page 2 of 11 Note2 H7N0608LD, H7N0608LS, H7N0608LM Electrical Characteristics (Ta = 25C) Item Symbol Min Typ Max Unit Test Conditions Drain to source breakdown voltage V(BR)DSS -- -- V ID = 10 mA, VGS = 0 Gate to source breakdown Voltage V(BR)GSS 20 -- -- V IG = 100 A, VDS = 0 Gate to source leak current IGSS -- -- 10 A VGS = 16 V, VDS = 0 Zero gate voltage drain current IDSS -- -- 10 A VDS = 60 V, VGS = 0 Gate to source cutoff voltage VGS(off) 1.5 -- 2.5 V ID = 1 mA, VDS = 10 VNote1 Static drain to source on state RDS(on) -- 6.0 8.0 m ID = 35 A, VGS = 10 VNote1 -- 8.0 12 m ID = 35 A, VGS = 4.5 VNote1 resistance 60 Forward transfer admittance |yfs| 45 75 -- S ID = 35 A, VGS = 10 VNote1 Input capacitance Ciss -- 6200 -- pF VDS = 10 V Output capacitance Coss -- 680 -- pF VGS = 0 Reverse transfer capacitance Crss -- 350 -- pF f = 1 MHz Total gate charge Qg -- 100 -- nC VDD = 25 V Gate to source charge Qgs -- 20 -- nC VGS = 10 V Gate to drain charge Qgd -- 20 -- nC ID = 70 A Turn-on delay time td(on) -- 45 -- ns VGS = 10 V, ID = 35 A Rise time tr -- 220 -- ns RL = 0.86 Turn-off delay time td(off) -- 125 -- ns Rg = 4.7 Fall time tf -- 35 -- ns Body-drain diode forward voltage VDF -- 0.94 -- V IF = 70 A, VGS = 0 Body-drain diode reverse recovery time -- 40 -- ns IF = 70 A, VGS = 0 diF/dt = 100 A/s trr Notes: 1. Pulse test Rev.1.00, Oct.30.2003, page 3 of 11 H7N0608LD, H7N0608LS, H7N0608LM Main Characteristics Power vs. Temperature Derating Maximum Safe Operation Area 1000 300 (A) Drain Current 40 0 50 100 150 Case Temperature 0.3 0.1 Operation in this area is limited by RDS(on) 0.03 Ta = 25C 0.01 0.1 0.3 1 200 3 10 Drain to Source Voltage Tc (C) 30 VDS 100 (V) Typical Transfer Characteristics 100 40 VGS = 3.2 V 20 (A) 3.6 V 80 ID Pulse Test 10 V 4.5 V 4.0 V 60 Drain Current (A) ID Drain Current PW = 10 ms (1 shot) 1 Typical Output Characteristics 60 DC Operation (Tc = 25C) 3 100 80 s 30 10 s s m 80 0 100 ID 120 10 10 1 Channel Dissipation Pch (W) 160 VDS = 10 V Pulse Test 40 Tc = 150C 20 25C -40C 0 2 4 6 Drain to Source Voltage Rev.1.00, Oct.30.2003, page 4 of 11 8 VDS 10 (V) 0 2 4 6 Gate to Source Voltage 8 VGS 10 (V) H7N0608LD, H7N0608LS, H7N0608LM Static Drain to Source on State Resistance vs. Drain Current Pulse Test 400 ID = 50 A 300 200 20 A 100 10 A 0 4 12 8 Drain to Source on State Resistance RDS(on) (m) Gate to Source Voltage 16 50 A 10, 20 A 4 4.5 V VGS = 10 V 0 -50 -25 0 25 10, 20, 50 A 50 75 100 125 150 Case Temperature Tc Rev.1.00, Oct.30.2003, page 5 of 11 Pulse Test 30 VGS = 4.5 V 10 10 V 3 1 1 3 VGS (V) 16 8 100 20 Static Drain to Source on State Resistance vs. Temperature 20 Pulse Test 12 Drain to Source on State Resistance RDS(on) (m) 500 (C) 30 100 300 1000 10 Drain Current ID (A) Forward Transfer Admittance vs. Drain Current Forward Transfer Admittance |yfs| (S) Drain to Source Saturation Voltage VDS(on) (V) Drain to Source Saturation Voltage vs. Gate to Source Voltage 1000 300 VDS = 10 V Pulse Test Tc = -40C 100 30 25C 10 150C 3 1 0.3 0.1 0.1 0.3 1 3 Drain Current ID 10 30 (A) 100 H7N0608LD, H7N0608LS, H7N0608LM Body-Drain Diode Reverse Recovery Time 10000 di / dt = 100 A / s VGS = 0, Ta = 25C 300 100 30 10 1000 Coss 300 30 0.3 1 3 10 Reverse Drain Current 30 Crss 100 3 1 0.1 Ciss 3000 Capacitance C (pF) Reverse Recovery Time trr (ns) 1000 Typical Capacitance vs. Drain to Source Voltage VGS = 0 f = 1 MHz 10 0 100 IDR (A) 10 VDS 40 20 0 (V) 12 8 VDD = 50 V 25 V 10 V 40 80 120 160 Gate Charge Qg (nc) Rev.1.00, Oct.30.2003, page 6 of 11 4 0 200 VGS VDD = 50 V 25 V 10 V 300 Switching Time t (ns) 60 16 Gate to Source Voltage VDS (V) Drain to Source Voltage VGS 80 40 50 (V) Switching Characteristics 1000 20 ID = 85 A 30 Drain to Source Voltage VDS Dynamic Input Characteristics 100 20 tf tr td(off) 100 td(on) tf 30 tr 10 VGS = 10 V, VDD = 30 V 3 PW = 5 s, duty < 1 % Rg = 4.7 1 0.1 0.3 3 10 1 Drain Current ID 30 (A) 100 H7N0608LD, H7N0608LS, H7N0608LM Reverse Drain Current vs. Source to Drain Voltage Repetitive Avalanche Energy EAR (mJ) Maximum Avalanche Energy vs. Channel Temperature Derating Reverse Drain Current IDR (A) 100 80 10 V 60 40 5V VGS = 0, -5 V 20 Pulse Test 0 0.4 0.8 1.2 Source to Drain Voltage 1.6 2.0 VSD 200 IAP = 40 A VDD = 25 V duty < 0.1 % Rg > 50 160 120 80 40 0 25 (V) 50 75 100 125 Channel Temperature Tch (C) Avalanche Test Circuit V DS Monitor Avalanche Waveform EAR = L 1 2 * L * I AP * 2 I AP Monitor VDSS VDSS - V DD V (BR)DSS I AP Rg D. U. T V DS VDD ID Vin 15 V 50 0 Rev.1.00, Oct.30.2003, page 7 of 11 150 VDD H7N0608LD, H7N0608LS, H7N0608LM Normalized Transient Thermal Impedance s (t) Normalized Transient Thermal Impedance vs. Pulse Width 3 1 Tc = 25C D=1 0.5 0.3 0.2 0.1 0.1 0.03 ch - c(t) = s (t) * ch - c ch - c = 1.56C/ W, Tc = 25C 0.05 2 0.0 PDM e 1 0.0 t ho ls pu D= PW 1s 0.01 10 PW T T 100 1m 10 m 100 m 1 10 100 Pulse Width PW (S) Switching Time Test Circuit Vout Monitor Vin Monitor Rg Waveform 90% D.U.T. RL Vin Vout Vin 10 V V DS = 30 V 10% 90% td(on) Rev.1.00, Oct.30.2003, page 8 of 11 10% tr 10% 90% td(off) tf H7N0608LD, H7N0608LS, H7N0608LM Package Dimensions * H7N0608LD As of January, 2003 4.44 0.2 10.2 0.3 1.3 0.15 1.3 0.2 1.37 0.2 0.2 0.86 +- 0.1 0.76 0.1 2.54 0.5 2.54 0.5 11.0 0.5 8.6 0.3 11.3 0.5 0.3 10.0 +- 0.5 (1.4) Unit: mm 2.49 0.2 0.4 0.1 Package Code JEDEC JEITA Mass (reference value) Rev.1.00, Oct.30.2003, page 9 of 11 LDPAK (L) -- -- 1.40 g H7N0608LD, H7N0608LS, H7N0608LM * H7N0608LS As of January, 2003 Unit: mm (1.5) 10.0 7.8 7.0 2.49 0.2 0.2 0.1 +- 0.1 1.7 7.8 6.6 1.3 0.15 + 0.3 - 0.5 8.6 0.3 (1.5) (1.4) 4.44 0.2 10.2 0.3 2.2 1.37 0.2 2.54 0.5 0.2 0.86 +- 0.1 2.54 0.5 0.4 0.1 0.3 3.0 +- 0.5 1.3 0.2 Package Code JEDEC JEITA Mass (reference value) Rev.1.00, Oct.30.2003, page 10 of 11 LDPAK (S)-(1) -- -- 1.30 g H7N0608LD, H7N0608LS, H7N0608LM * H7N0608LM As of January, 2003 Unit: mm (2.3) 10.0 7.8 7.0 2.49 0.2 1.7 7.8 6.6 1.3 0.15 + 0.3 - 0.5 8.6 0.3 (1.5) (1.4) 4.44 0.2 10.2 0.3 0.2 0.1 +- 0.1 2.2 1.37 0.2 2.54 0.5 0.2 0.86 +- 0.1 2.54 0.5 0.4 0.1 0.3 5.0 +- 0.5 1.3 0.2 Package Code JEDEC JEITA Mass (reference value) Rev.1.00, Oct.30.2003, page 11 of 11 LDPAK (S)-(2) -- -- 1.35 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2003. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon 1.0