MOTOROLA Order this document SEMICONDUCTOR TECHNICAL DATA by MRF5943/D The RF Line NPN Silicon MRF5943, R1, R2 High-Frequency Transistor ... designed for amplifier, oscillator or frequency multiplier applications in industrial equipment. Suitable for use as a Class A, B or C output driver or predriver stages in VHF and UHF. . I = 400 mA Low Cost SORF Plastic Surface Mount Package SURFACE MOUNT e Guaranteed RF Specification |S24|2 HIGH-FREQUENCY sae TRANSISTOR e SParameter Characterization NPN SILICON Tape and Reel Packaging Options Available by adding suffix: R1 suffix = 500 units per reel R2 suffix = 2,500 units per reel MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage VCEO 30 Vde CollectorBase Voltage VCBO 40 Vde EmitterBase Voltage VEBO 3.5 Vde Collector Current Continuous Ic 400 mAdc Operating and Storage Junction Ty: Tstg | 55 to +150 C Temperature Range CASE 751-05, STYLE 1 DEVICE MARKING (SO-8) MRF5943 = 5943 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation @ Ta = 25C PD 1.0 Watt Derate above 25C 8.0 mW/C Storage Temperature Tstg 150 C Thermal Resistance, Junction to Ambient RaJA 125 C/W ELECTRICAL CHARACTERISTICS (Ta, = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS CollectorEmitter Breakdown Voltage (Ico = 5.0 mA) V(BR)CEO 30 _ _ v CollectorBase Breakdown Voltage (Ic = 100 yA) V(BR)CBO 40 _ _ Vv Emitter-Base Breakdown Voltage (IE = 100 LA) V(BR)EBO 3.5 _ _ Vv Collector Cutoff Current (VCE = 20 V) ICEO _ _ 50 pA Collector Cutoff Current (Vcp = 15 V) ICBO _ _ 10 pA ON CHARACTERISTICS DC Current Gain (I = 50 mA, Vcg = 15 V) hFE 25 _ 300 _ CollectorEmitter Saturation Voltage (Ic = 100 mA, Ip = 10 mA) VCE(sat) _ _ 0.2 v BaseEmitter Saturation Voltage (Ic = 100 mA, |B = 10 mA) VBE(sat) _ _ 1.0 Vv SMALL-SIGNAL CHARACTERISTICS Current-Gain Bandwidth Product fT _ 1550 _ MHz (I = 35 mA, VcE = 15 V, f = 100 MHz) Insertion Gain (VcE = 15 V, Ic = 35 mA, f = 250 MHz) |Se4|2 12 15 _ dB REV6 (S) MOTOROLA Motorola, Inc. 1994VcE Ic i S41 S21 S12 $22 (Volts) (mA) (MHz) IS44| o IS24| o IS42| o IS2a| o 15 35 10 0.37 -63 53.7 157 0.01 59 0.91 -18 30 0.52 -120 36.5 128 0.01 48 0.64 -38 50 0.58 -142 25.4 113 0.02 45 0.47 44 70 0.59 -154 19 105 0.02 46 0.38 44 100 0.60 -162 13.6 97 0.02 49 0.32 -43 300 0.64 178 46 77 0.05 59 0.28 -49 500 0.65 168 2.8 64 0.07 60 0.32 -62 700 0.65 159 2.0 53 0.09 63 0.38 -76 1000 0.64 144 1.4 38 0.13 63 0.46 -93 Table 1. Common Emitter S-Parameters PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. . CONTROLLING DIMENSION: MILLIMETER. . DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. | ca [B_] 4% P - g Cc 7 f R x45 7 F Le tage SR sx D othe K | 0.25 (0.010) @ PIN(. EMITTER 2. COLLECTOR 3. COLLECTOR 4. EMITTER 5. EMITTER 6 7 8 BASE BASE EMITTER CASE 751-05 ISSUE N Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/ EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi+SPD-JLDC, Toshikatsu Otsuki, PO. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com TOUCHTONE (602) 244-6609 INTERNET: http://DesignNET.com 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Lid.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 (S) MOTOROLA MRF5943/D