Special Features
Electrical Specs
10 Watts
AEE01-12Vin
10 W, Dual output
2:1 Input range
1.0" x 2.0" x 0.33 case
Industry standard package
•Low Profile
•Low Cost
Trim and Enable Option on single out
module only
Operating base temperature range:
-25°C to +100°C
Storage temperature: -40°C to +125°C
MTBF: 3 Million Hours (Belcore TR332)
UL UL1950 Recognition
CSA CSA22.2-950 Recognition
TUV EN60950 Recognition
Input
Input range 9 to 18 VDC
Efficiency 78% typical (3.3V)
Output
Voltage tolerance ±1.0%
Overall regulation ±1% max
Noise/ripple 1% Typ, 2% Max
Transient response 300 usec typical (50% step load
change to within 3%Vo)
Temperature Regulation ±0.02 %Vo/°C
Switching frequency 330kHz
Isolation
I/O isolation 1500 VDC Input to Output
1000 VDC Input to Case
1000 VDC Output to Case
Isolation Resistance 300 Mohms
Total Power: 10 Watts
Input Voltages: 12V
No. of Outputs: Single and Dual
Environmental
Safety
America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662
24
W9959_02_DCDC_001-073_73 2/8/02 3:18 PM Page 24
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
Ordering Information
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Input Output Efficiency Model Number
Voltage Voltage
9-18 V 3.3V @ 2.55 A 78% AEE02F12
9-18 V 5.0V @ 2 A 81% AEE02A12
9-18 V 12V @ 0.84 A 83% AEE01B12
9-18 V 15V @ 0.68 A 84% AEE01C12
9-18 V ±5V @ ±1.0 A 81% AEE01AA12
9-18 V ±12V @ ±0.42 A 83% AEE00BB12
9-18 V ±15V @ ±0.33 A 84% AEE00CC12
NOTES:
Enable Function
"1" = negative logic enable (std, without "1 or 4" = no enable)
"4" = positive logic enable (std, without "1 or 4" = no enable)
Trim Feature
"9" = Trim feature (std, without "9" no Trim) Available on Single Output devices only
Notes:
1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor
is recommended to be placed from +V out to comm.
2. All specifications are typical at nominal line, full load,
and 25°C unless otherwise noted.
3. All specifications subject to change without notice.
4. Mechanical drawings are for reference only.
AEE01-12Vin
25
www.astec.com
W9959_02_DCDC_001-073_73 2/8/02 3:19 PM Page 25