HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Typical Applications Features The HMC253QS24 / HMC253QS24E is ideal for DC - 2.5 GHz applications: Low Insertion Loss (2 GHz): 1.3dB * CATV/DBS Integrated 3:8 TTL Decoder * CDMA 24 Lead QSOP Package Single Positive Supply: Vdd = +5V * Cellular/PCS General Description The HMC253QS24 & HMC253QS24E are low-cost non-reflective SP8T switches in 24-lead QSOP packages featuring wideband operation from DC to 2.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 3:8 decoder is integrated on the switch requiring only 3 control lines and a positive bias to select each path. The HMC253QS24 & HMC253QS24E SP8T will replace multiple configurations of SP4T and SPDT MMIC switches. SWITCHES - SMT 9 Functional Diagram Electrical Specifi cations, TA = +25 C, For TTL Control and Vdd = +5V in a 50 Ohm system Parameter Min. Typ. Max. Units 1.1 1.3 1.8 1.5 1.7 2.4 dB dB dB Insertion Loss DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz Isolation DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz 32 26 24 36 30 28 dB dB dB Return Loss "On State" DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz 14 9 6 18 12 8 dB dB dB Return Loss (RF1-8) "Off State" 0.3 - 2.5 GHz 0.5 - 2.5 GHz 7 10 10 13 dB dB Input Power for 1 dB Compression 0.3 - 2.5 GHz 20 23 dBm Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 0.3 - 2.5 GHz 40 43 dBm Switching Characteristics 0.3 - 2.5 GHz 30 100 ns ns tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 9 - 134 Frequency For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Isolation 0 0 -0.5 -10 RF6, RF3 ISOLATION (dB) INSERTION LOSS (dB) Insertion Loss -1 -1.5 -2 -30 -40 -50 +25 C +85 C -40 C -2.5 -20 -60 RF1, RF2, RF4, RF5, RF7, RF8 -3 -70 0 1 2 0 3 1 3 FREQUENCY (GHz) Return Loss 0 RFC RFC 1-6 On RFC 1-6 Off -5 RETURN LOSS (dB) 9 SWITCHES - SMT FREQUENCY (GHz) 2 -10 -15 -20 -25 -30 0 1 2 3 FREQUENCY (GHz) Truth Table Bias Voltage & Current Vdd Range = +5.0 Vdc 10% Control Input Vdd (Vdc) Idd (Typ.) (mA) Idd (Max.) (mA) +5.0 6.0 9.0 TTL/CMOS Control Voltages A B Signal Path State C RFCOM to: Low Low Low RF1 High Low Low RF2 Low High Low RF3 High High Low RF4 State Bias Condition Low Low High RF5 Low 0 to +0.8 Vdc @ 5 uA Typ. High Low High RF6 +2.0 to +5.0 Vdc @ 70 uA Typ. Low High High RF7 High High High RF8 High NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4, 5, 6, 7, 8. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 135 HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vdd) +7.0 Vdc Control Voltage Range (A, B, C) -0.5V to Vdd +1Vdc Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Maximum Input Power Vdd = +5V +20 dBm (0.05 - 0.5 GHz) +24 dBm (0.5 - 2.5 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 SWITCHES - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Leadframe Plating MSL Rating HMC253QS24 Low Stress Injection Molded Plastic Silica and Silicon Impregnated Sn/Pb Solder MSL1 HMC253QS24E RoHS-compliant Low Stress Injection Molded Plastic Silica and Silicon Impregnated 100% Matte Tin MSL1 Package Marking [3] [1] HMC253 XXXX [2] HMC253 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 9 - 136 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Evaluation Circuit Board SWITCHES - SMT 9 List of Materials for Evaluation PCB 103706 [1] Item Description J1 - J9 PCB Mount SMA Connector J10 - J14 DC Pin C1 - C9 100 pF Capacitor, 0402 Pkg. C10 0.01 uF Capacitor, 0603 Pkg. U1 HMC253QS24 / HMC253QS24E SP8T Switch PCB [2] 103704 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown above. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 137