CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com
Type DMMA Polyester Film Capacitors
T H L S T H L S
Cap. Catalog Maximum Maximum Maximum ±.062 (1.6 ) Cap. Catalog Maximum Maximum Maximum ±.062 (1.6 )
(µF) Part Number In. (mm) In. (mm) In. (mm) In. (mm) (µF) Part Number In. (mm) In. (mm) In. (mm) In. (mm)
360 Vac (800 Vdc) 480 Vac (1,000 Vdc)
0.015 DMMACS15K F .295 (7.5) .460 (11.7) .937 (23.8) .687 (17.4) 0.010 DMMADS1K-F .325 (8.3) .485 (12.3) .937 (23.8) .687 (17.4)
0.022 DMMACS22K-F .343 (8.7) .500 (12.7) .937 (23.8) .687 (17.4) 0.015 DMMADS15K-F .375 (9.5) .530 (13.5) .937 (23.8) .687 (17.4)
0.033 DMMACS33K-F .375 (9.5) .530 (13.5) .937 (23.8) .687 (17.4) 0.022 DMMADS22K-F .440 (11.2) .595 (15.1) .937 (23.8) .687 (17.4)
0.047 DMMACS47K-F .405 (10.3) .565 (14.3) .937 (23.8) .687 (17.4) 0.033 DMMADS33K-F .480 (12.2) .655 (16.6) .937 (23.8) .687 (17.4)
0.068 DMMACS68K-F .465 (11.8) .640 (16.3) .937 (23.8) .687 (17.4) 0.047 DMMADS47K-F .440 (11.2) .610 (15.5) 1.125 (28.6) .875 (22.2)
0.100 DMMACP1K-F .450 (11.4) .610 (15.5) 1.125 (28.6) .875 (22.2) 0.068 DMMADS68K-F .500 (12.7) .675 (17.1) 1.125 (28.6) .875 (22.2)
0.150 DMMACP15K-F .515 (13.1) .690 (17.5) 1.125 (28.6) .875 (22.2) 0.100 DMMADP1K-F .580 (14.7) .765 (19.4) 1.125 (28.6) .875 (22.2)
0.220 DMMACP22K-F .590 (15.0) .765 (19.4) 1.125 (28.6) .875 (22.2) 0.150 DMMADP15K-F .670 (17.0) .875 (22.2) 1.125 (28.6) .875 (22.2)
0.330 DMMACP33K-F .685 (17.4) .890 (22.6) 1.125 (28.6) .875 (22.2) 0.220 DMMADP22K-F .685 (17.4) .875 (22.2) 1.312 (33.3) 1.000 (25.4)
0.470 DMMACP47K -F .685 (17.4) .890 (22.6) 1.312 (33.3) 1.000 (25.4) 0.330 DMMADP33K-F .700 (17.8) .905 (23.0) 1.312 (33.3) 1.000 (25.4)
0.680 DMMACP68K-F .810 (20.6) 1.015 (25.8) 1.312 (33.3) 1.000 (25.4) 0.470 DMMADP47K-F .810 (20.6) 1.030 (26.2) 1.500 (38.1) 1.250 (31.7)
1.000 DMMACW1K-F .860 (21.8) 1.070 (27.2) 1.500 (38.1) 1.250 (31.7) 0.680 DMMADP68K-F .875 (22.2) 1.110 (28.2) 1.687 (42.8) 1.468 (37.3)
1.500 DMMACW1P5K-F .860 (21.8) 1.140 (28.9) 1.937 (49.2) 1.656 (42.0) 1.000 DMMADW1K-F .950 (24.1) 1.220 (31.0) 1.937 (49.2) 1.656 (42.0)
2.000 DMMACW2K-F .965 (24.5) 1.265 (32.1) 1.937 (49.2) 1.656 (42.0) 1.500 DMMADW1P5K-F 1.062 (27.0) 1.345 (34.2) 2.125 (54.0) 1.875 (47.6)
RoHS Compliant
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, conrming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specic customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.