T PL IA N M CO *R oH S Features Surface Mount / Single Turn / Cermet Side adjust available Industrial / Sealed Compatible with surface mount manufacturing processes Compatible with popular vacuum pick-and-place equipment J-hook, gull-wing and pinned configurations Meets EIA/EIAJ/IPC/VECI SMD standard trimmer designs RoHS compliant* - see processing information on lead free surface mount trimmers For trimmer applications/processing guidelines, click here 3314 - 4 mm Square Trimpot(R) Trimming Potentiometer Electrical Characteristics Standard Resistance Range .....................10 ohms to 2 megohms (see standard resistance table) Resistance Tolerance ........... 20 % std. (tighter tolerance available) End Resistance ..... 1 % or 2 ohms max. (whichever is greater) Contact Resistance Variation .................................... 3 % or 3 ohms Resolution ................................... Insulation Resistance ............... 500 vdc. 100 megohms min. Dielectric Strength Sea Level............... 500 vac (1 minute) Adjustment Angle ................. 210 nom. Environmental Characteristics Power Rating (300 volts max. for Style G, J & H; 50 volts max. for Style R) 70 C .................................... 0.25 watt 125 C ....................................... 0 watt Temperature Range ... -55 C to +125 C ... 100 ppm/C Seal Test ..85 C Fluorinert/60 seconds Humidity ............................90-98 % RH, 10 cycles, 240 hours TRS 2 %; IR 10 megohms Vibration .....20 G TRS 1 %; VRS 1 % Shock .......100 G TRS 1 %; VRS 1 % Load Life ....(@ 70 C Rated Power 1000 Hours) TRS 3 % Rotational Life .......................100 cycles TRS 3 % Thermal Shock .........................5 cycles TRS 2 %; VRS 1 % Physical Characteristics Mechanical Angle ................. 240 nom. Torque.............................180 g-cm max. Stop Strength ..................300 g-cm min. Pushover Strength (S & Z Style) ................1.6 kilograms (3.5 lbs.) min. Weight ............... Approximately 0.01 oz. Marking.................Manufacturer's code, resistance code and date code Wiper ............... 50 % (Actual TR) 10 % Flammability ..........................U.L. 94V-0 Standard Packaging J, G and R ...500 pcs./7 " reel (MSL-1) S and Z........200 pcs./7 " reel (MSL-1) H....................................100 pcs./tube Adjustment Tool..............................H-90 Product Dimensions 3314J-1 4.50 (.177) 2 4.50 (.177) 2 2.55 (.100) 6.30 (.248) 4.50 (.177) 0.20 (.008) TYP. 4.50 (.177) 3 1 RECOMMENDED PCB LAYOUT 2.35 (.093) 1.0 (.040) 3 PLCS. 1 2.0 (.079) 3 PLCS. 0.20 (.008) TYP. 2.55 (.100) 4.00 TYP. (.157) 2.55 (.100) 2.55 (.100) 0.6 0.1 (.024 .004) 3 PLCS. 4.00 (.157) 1.30 0.1 (.051 .004) 5.00 (.197) 3 2.3 (.091) 1.3 (.051) 2 PLCS. 0.8 0.1 (.031 .004) 2 PLCS. 5.00 (.197) 5.00 0.10 (.197 .004) OUTSIDE WHEN PINS ARE PARALLEL 5.00 (.197) 2.0 (.079) 0.80 (.031) DIA. TYP. 5.00 (.197) 3314G-1 4.50 (.177) 2 2.55 (.100) 4.50 (.177) 3 0.20 (.008) TYP. 0.6 TYP. (.024) 5 MAX. TYP. 1 3 RECOMMENDED PCB LAYOUT 2.3 (.091) 0.8 0.1 1.3 (.031 .004) (.051) 2 PLCS. 2 PLCS. COMMON DIMENSIONS ALL PIN STYLES: STRAIGHT 2 ADJ. SLOT 2.45 LONG (.096) .51 WIDE X (.020) .51 1 3 DEEP X (.020) COMMON DIMENSIONS ALL PIN STYLES: CROSS 2 ADJ. SLOT 2.41 LONG (.095) .51 WIDE X (.020) .51 1 DEEP X (.020) COMMON DIMENSIONS ALL PIN STYLES: STRAIGHT 2 ADJ. SLOT 2.45 LONG (.096) .51 WIDE X (.020) .51 3 1 DEEP X (.020) COMMON DIMENSIONS ALL PIN STYLES: CROSS ADJ. SLOT 2.41 LONG (.095) .51 WIDE X (.020) 2.35 (.093) 6.20 (.244) 1.3 (.051) 3 PLCS. 5.00 (.197) 1.30 0.1 (.051 .004) 5.5 (.217) 3 2 1 X .51 DEEP (.020) 2.0 (.079) DIMENSIONS: TOLERANCES: 0.25 (.010) MM (INCHES) EXCEPT WHERE NOTED WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. "Fluorinert" is a registered trademark of 3M Co. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 - 4 mm Square Trimpot(R) Trimming Potentiometer Product Dimensions 2.55 (.100) 5.00 (.197) 2 6.20 (.244) 0.51 0.13 (.020 .005) TYP. 4.50 (.177) 2.54 (0.10) 1.27 (0.05) 0.51 0.13 (.020 .005) TYP. 1 3 1 R 0.13 (.005) MAX. TYP. TYP. 0.20 (.008) 2.35 (.092) 0.80 0.10 (.031 .004) 2 PLCS. 1.30 0.10 (.051 .004) 5.00 (.197) 5.61 (0.221) 3 0.61 (.024) 5.01 (.197) 1.42 REF. (.056) 4.95 0.13 (0.193 0.005) 3.13 (0.123) 5.81 0.13 (0.229 0.005) 3.30 (0.130) 1.78 (0.70) 0.50 (.020) 5.5 (.216) 4.5 (0.177) 1.05 (0.041) ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 RECOMMENDED PCB LAYOUT 2.3 (.090) 1.3 (.051) 2 PLCS. DIA. 3.2 (.126) THRU. 6.20 (.244) 2 1.42 0.13 (0.056 0.005) 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 2.0 (.079) 1.3 (.051) 2 PLCS. ORIENTATION FEATURE RECOMMENDED PCB LAYOUT 3.5 (0.138) 5.00 (.197) 2 6.70 (.264) 4.50 (.177) 0.51 0.12 (.020 .005) 3 PLCS. 2.35 (.093) 1 0.51 0.13 (.020 .005) TYP. 5 MAX. 3 PLCS. 0.80 0.10 (.031 .004) 2 PLCS. DIA. 3.2 (.126) THRUHOLE 0.27 0.10 (.050 .004) 2 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 R 3 1 1.3 (.051) 2 PLCS. 1.2 (0.047) 5.8 (.228) 0.20 (.008) MAX. 4 PLCS. RECOMMENDED PCB LAYOUT 2.31 (.091) 1.1 (0.043) 1.2 (0.047) 1.75 (0.069) 1.15 (0.045) 1.6 (0.063) 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 DIMENSIONS: 6.25 (.246) LEAD FOOTPRINT 2.0 (.079) 1.3 3 PLCS. (.051) 1.15 (0.045) 1.75 (0.069) TOLERANCES: 0.25 (.010) MM (INCHES) EXCEPT WHERE NOTED Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 - 4 mm Square Trimpot(R) Trimming Potentiometer Product Dimensions TAPE 1.27 (0.50) 1 2 2.54 (0.10) 1.19 (0.047) 3.32 (0.131) .30 MAX. (.012) 2.74 0.10 (.108 .004) 1.29 (0.051) 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 DIA. 1.50 + 0.10/ - 0.00 (.059 + .004/ - .000) 0.61 (.024) 5.01 (.197) 5.50 0.5 (.217 .020) 4.00 0.10 (.157 .004) 5.56 (0.219) 0.96 (.038) 3.08 (0.121) 3.18 (.125) 5.26 0.10 (J) (.207 .004) 6.45 0.10 (G) (.254 .004) 5.26 0.10 (.207 .004) 2.00 0.05 (.079 .020) 5.76 (0.227) RECOMMENDED PCB LAYOUT 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 1.3 (0.051) 8.00 0.20 (.315 .008) 2.54 (0.10) 2.01 (.079) DIA. 1.50 + 0.10/ - 0.00 (.059 + .004/ - .000) 1.75 0.10 (.069 .004) 0.26 (.010) 12.00 0.30 (.472 .012) 3.48 (.137) 0.21 (.008) 2.01 (.079) REEL 2.01 (.079) MIN. 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 0.51 (.512 .020) DIA. 1 2 18.4 (.724) MAX. (MEASURED AT HUB) 50.00 (1.969) MIN. 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 2 CCW WIPER 3 1 CLOCKWISE CW 177.8 2.03 DIA.* (7.00 .080) 330.2 2.0 DIA.** (13.00 .079) 12.4 + 2.01/ -.000 (.488 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 Meets EIA specification 481. DIMENSIONS: TOLERANCES: 0.25 (.010) MM (INCHES) EXCEPT WHERE NOTED Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 - 4 mm Square Trimpot(R) Trimming Potentiometer TAPE TAPE 3.5 (.138) 0.25 0.10 (.010 .004) 3.5 0.10 (.138 .004) TAPE 0.22 2 PLCS. (.009) 0.33 (.013) 0.50 0.05 (.020 .002) 0.3 (.012) 62 5.52 0.05 (.217 .002) 1.50 + 0.10/ - 0.00 (.059 + .004 - .00) DIA. 6.48 0.10 (.255 .004) 16.00 0.3 (.630 0.012) DIA. 1.5 (.059) 7.50 0.10 (.295 .004) 4.00 (.157) 4.00 0.10 (.157 .004) 5.26 0.10 (.207 .004) 2.00 0.05 (.079 .002) 1.50 + 0.10/ - 0.00 (.059 + .004 - .000) DIA. 1.75 0.10 (.069 .004) 2.00 (.079) 8.00 (.315) 1.5 + 0.1/-0.0 (0.59 +.004/-0.0) DIA. 12.00 0.30 (4.72 .012) 4.00 0.10 (.157 .004) 1.75 (.069) 5.5 8.3 (.217) (.327) 7.5 (.295) 16.00 (.630) REEL 5.30 0.10 (.209 .004) 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 0.51 (.512 .020) DIA. 0.5 TYP. (.020) 12.00 0.10 (.472 .004) 2.00 0.10 (.079 .004) 1.75 0.10 (.068 .004) MIN. R DIA. 1.5 MIN. (.059) 7.30 (.287) 18.4 (.724) MAX. (MEASURED AT HUB) LABEL REEL MIN. 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 0.51 (.512 .020) DIA. 50.00 (1.969) MIN. 178.0 DIA. (7.00) 22.4 (.882) MAX. (MEASURED AT HUB) 50.00 (1.969) MIN. 177.8 2.03 DIA.* (7.00 .080) 330.2 2.0 DIA.** (13.00 .079) 12.4 + 2.01/ -.000 (.488 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) 177.8 2.03 DIA.* (7.00 .080) 330.2 2.0 DIA.** (13.00 .079) 16.4 + 2.0/ -.000 (.646 + .079/ - .000) (MEASURED AT HUB) Meets EIA specification 481. DIMENSIONS: TOLERANCES: 0.25 (.010) MM (INCHES) EXCEPT WHERE NOTED * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 - 4 mm Square Trimpot(R) Trimming Potentiometer How To Order Standard Resistance Table 3314 J - 1 - 502 E Model Style TAPE 0.40 MAX. (.016) 16.00 (.630) 7.5 (.295) 1.75 (.069) 1.50 + 0.10/-0.0 (0.59 +.004/-.0) DIA. 12.00 (.472) 4.00 0.10 (.157 .004) 5.50 0.10 (.217 .004) 2.00 0.10 (.079 .004) 1.50 DIA. MIN. (.059) 5.50 0.10 (.217 .004) Indicator (Styles J, G, H & S) -1 = Single Slot -2 = Cross Slot -3 = Single Slot w/Reverse Marking -4 = Cross Slot w/Reverse Marking Product Indicator (Style R only) -GM5 = Cross Slot w/Extended Lead Frame -1 = Single Slot -2 = Cross Slot -3 = Single Slot w/Reverse Marking -4 = Cross Slot w/Reverse Marking Product Indicator (Style Z only) -GA4 = Single Slot -1 = Cross Slot -3 = Single Slot w/Reverse Marking -4 = Cross Slot w/Reverse Marking Resistance Code Embossed Tape Designator (MSL-1)** E = Styles J, G and R: 500 pcs./7 " reel Styles S and Z: 200 pcs./7 " reel G = Styles J and G: 3000 pcs./13 " reel Style R: 2500 pcs./13 " reel Styles S and Z: 1000 pcs./13 " reel **Style H is available in tube packaging only. Resistance (Ohms) 10 20 50 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 250,000 500,000 1,000,000 2,000,000 Resistance Code 100 200 500 101 201 501 102 202 502 103 203 503 104 204 254 504 105 205 Popular distribution values listed in boldface. Special resistances available. Tape and reel material meets Antistatic ANSI/ ESD 5541-2003 packaging standards. 5 MAX. 5.59 0.10 (.220 .004) REEL MIN. 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 0.51 (.512 .020) DIA. 22.4 (.882) MAX. (MEASURED AT HUB) 50.00 (1.969) MIN. 177.8 2.03 DIA.* (7.00 .080) 330.2 2.0 DIA.** (13.00 .079) 16.4 + 2.0/ -.000 (.646 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. DIMENSIONS: TOLERANCES: 0.25 (.010) MM (INCHES) EXCEPT WHERE NOTED REV. 08/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[ and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)WYVK\J[PUH\ZLYHWWSPJH[PVUTH]HY MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ(R) product with other components PU[OL\ZLYZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ(R) WYVK\J[HSZVJHUHUKKV]HYPUKPLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH]HYV]LY[PTL<ZLYZZOV\SKHS^HZ]LYPM the actual performance of the Bourns(R)WYVK\J[PU[OLPYZWLJPAJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPLYLUJLZIL[^LLUSHIVYH[VYHUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\YUZOHZL_WSPJP[SKLZPNUH[LKHUPUKP]PK\HS)V\YUZ(R) product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\SHYX\HSPAJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU MHPS\YLVMHUPUKP]PK\HS)V\YUZ(R)WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[YZ[HUKHYKVYWHY[PJ\SHYX\HSPAJH[PVU<ZLYZ of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns(R)WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN HWWSPJH[PVUZUVYPUHUV[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTHYLZ\S[PUWLYZVUHSPUQ\YKLH[OVYZL]LYLWYVWLY[ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZSHUKZWLJPAJHSSHWWYV]LKPU^YP[PUNI[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns(R)WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[ [OL\ZLYZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PALKI[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSSLX\P]HSLU[JSHZZPAJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ )V\YUZL_WYLZZSPKLU[PALZ[OVZL)V\YUZ(R)Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO WYVK\J[ZKH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK(WWSPJH[PVUZ<USLZZL_WYLZZSHUKZWLJPAJHSSHWWYV]LKPU^YP[PUNI[^V H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLIJHZLIHZPZ\ZLVMHUV[OLY)V\YUZ(R)Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPa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ourns(R)Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS VYHUV[OLYNLULYHSSLX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY \ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZSPKLU[PALZ)V\YUZ(R) standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[ZKH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK(WWSPJH[PVUZ<USLZZL_WYLZZSHUKZWLJPAJHSS HWWYV]LKPU^YP[PUNI[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLIJHZLIHZPZ\ZLVMHUV[OLY)V\YUZ(R) standard WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[ the user's sole risk. ;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)J\Z[VTWYVK\J[ZHYLZWLJPHSSKLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)WYVK\J[ZVY[LJOUVSVNMVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\ZL Bourns(R)WYVK\J[ZVY[LJOUVSVNPUHUMHJPSP[^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\SH[PVUZ-\Y[OLY)V\YUZ(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without WYPVYH\[OVYPa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bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf *9