Storage
Store between -10 and 40 °C [14 and 104 °F] in dry area.
Health, Safety, and Environmental Awareness
Please see the 8616 Safety Data Sheet (SDS) for greater details on transportation, storage, handling
and other security guidelines.
Environmental Impact: The VOC (volatile organic compound) content is 18% by WHMIS and European
standards. Not regulated as a dangerous good for transport.
Health and Safety: Wear safety glasses and disposable gloves to avoid exposures.
Approximate HMIS and NFPA Risk Ratings Legend:
0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
Application Instructions
The conductive grease performance depends on mainly on surface preparation. Improperly prepared
contact surfaces can degrade the paste’s stability, conductivity, and lubrication characteristics. While the
thickness and coverage are also important, the application method itself can easily be adjusted according
to performance and application needs.
Prerequisites
• Wear gloves and protective clothing.
• Clean and dry the surface of the substrate to remove other oils and greases, as well as dust, water,
solvents, or any other contaminants.
• Recommendations: Use MG 824 Isopropyl Alcohol or MG 4351 Thinner
Equipment
• Lint free cloth (for cleaning contact and for wiping excess residue)
• Spatula or stick application tools (sized appropriately for your application)
• Isopropyl alcohol or other residue-free organic solvents
To apply the grease
1. Wipe the contact with a lint-free cloth.
2. Clean the contacts with isopropyl alcohol or other non-oil based cleaner.
3. Once dry, spread grease in a thin layer onto the surface.