RF PhotoMOS (AQW22PN) Lower output capacitance and on resistance. High speed switching. (Turn on time: 0.2ms, Turn off time: 0.08ms). FEATURES 6.4 .252 9.78 .385 RF PhotoMOS (AQW22PN) 3.90.2 .154.008 6.4 .252 9.78 .385 1. PhotoMOS relay 2-channels (Form A) type with high response speed, low leakage current and low On resistance. 2. Applicable for 2 Form A use as well as two independent 1 Form A use 3. Compact 8-pin DIP size The device comes in a compact (W) 6.4x(L) 9.78x(H) 3.9 mm (W) .252x(L) .385x(H) .154 inch , 8-pin DIP size (through hole terminal type). 4. Low capacitance between output terminals ensures high response speed: The capacitance between output terminals is small, typically 10 pF. This enables for a fast operation speed of 200 s. 5. High sensitivity and low On resistance: Maximum 0.07 A of load current can be controlled with input current of 5 mA. The On resistance is less than our 3.60.2 .142.008 mm inch 1 8 2 7 3 6 4 5 conventional models. With no metallic contacts, the PhotoMOS relay has stable switching characteristics. 6. Low-level off state leakage current: The SSR has an off state leakage current of several milliamperes, whereas the PhotoMOS relay has only 30 pA even with the rated load voltage of 200 V (AQW227N). 7. Controls low-level analog signals: PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 8. Low terminals electromotive force: (approx. 1 V) TYPICAL APPLICATIONS * Measuring equipment * Scanner, IC checker, Board tester TYPES Part No. Output rating* Type Through hole terminal Packing quantity Surface-mount terminal Tape and reel packing style Load voltage Load current 200 V 50 mA AQW227N 400 V 40 mA AQW224N Tube packing style Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side Tube Tape and reel AQW227NA AQW227NAX AQW227NAZ 1,000 pcs. AQW224NA AQW224NAX AQW224NAZ 1 tube contains 40 pcs. 1 batch contains 400 pcs. AC/DC type *Indicate the peak AC and DC values. Note: For space reasons, the package style indicator "X" or "Z" are not marked on the relay. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input Symbol AQW227N(A) AQW224N(A) LED forward current IF 50 mA LED reverse voltage VR 5V Peak forward current IFP 1A Power dissipation Pin 75 mW Load voltage (peak AC) VL 200 V 400 V IL 0.05 A (0.07 A) 0.04 A (0.05 A) Peak load current Ipeak 0.15 A 0.12 A Power dissipation Pout Continuous load current Output f = 100 Hz, Duty factor = 0.1% PT 850 mW I/O isolation voltage Viso 1,500 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F ds_x615_en_aqw22n: 181206J Peak AC, DC ( ): in case of using only 1 channel A connection: 100 ms (1 shot), VL = DC 800 mW Total power dissipation Temperature limits Remarks Non-condensing at low temperatures 1 RF PhotoMOS (AQW22PN) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical LED operate current Minimum Typical LED dropout voltage 0.4 mA Ron 30 70 50 100 Typical IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 f = 1 MHz 10 pF Output capacitance Cout Maximum Off state leakage current Turn on time* Switching speed Turn off time* Transfer characteristics IF = 50 mA 1.5 V Maximum Output IL = Max. 1.25 V (1.14 V at IF = 5 mA) Typical On resistance IL = Max. 0.8 mA VF Maximum Remarks 3.0 mA IFoff Typical AQW224N(A) 0.9 mA IFon Maximum LED turn off current Input AQW227N(A) 15 pF Maximum Ileak Typical Typical 0.08 ms Initial I/O isolation resistance Minimum IF = 5 mA IL = Max. 0.2 ms 0.8 pF Ciso Maximum IF = 5 mA IL = Max. 0.5 ms Toff Maximum Typical I/O capacitance 0.20 ms Ton Maximum IF = 0 VL = Max. 10 nA Riso 1.5 pF f = 1 MHz VB = 0 1,000 M 500 V DC Note: Recommendable LED forward current IF = 5mA. Type of connection *Turn on/Turn off time Input 90% Output 10% Ton Toff Q Dimensions Q Schematic and Wiring Diagrams Q Cautions for Use REFERENCE DATA 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 120 100 100 80 60 AQW227N AQW224N 40 AQW224N 80 60 -20 0 20 40 60 80 85 100 0 0.6 0.4 AQW227N AQW227N 0.2 20 Ambient temperature, C 2 0.8 40 20 0 -40 1.0 Turn on time, ms 140 On resistance, Load current, mA 1. Load current vs. ambient temperature characteristics -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 AQW224N -40 -20 0 20 40 60 80 85 Ambient temperature, C ds_x615_en_aqw22n: 181206J RF PhotoMOS (AQW22PN) 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 0.3 0.2 0.1 0 4 3 2 1 AQW224N AQW227N -40 0 -20 20 40 60 0 80 85 -40 -20 0 20 40 60 0 80 85 Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 1.3 -4 -3 -2 0 20 40 60 AQW227N AQW224N 50 -1 1 50mA 30mA 20mA 10mA 5mA -50 2 3 4 Voltage, V -100 20 40 60 80 85 Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 10-9 AQW224N AQW227N 10 -12 -150 80 85 0 10-6 100 1.4 -20 -20 9. Off state leakage current 150 Current, mA LED dropout voltage, V 1.5 -40 -40 AQW227N Ambient temperature, C Sample: All types; LED current: 5 to 50 mA 0 AQW224N Ambient temperature, C 8. Voltage vs. current characteristics of output at MOS portion 1.0 2 1 7. LED dropout voltage vs. ambient temperature characteristics 1.1 3 AQW224N Ambient temperature, C 1.2 4 AQW227N Off state leakage current, A Turn off time, ms 0.4 5 LED turn current, mA LED operate current, mA 5 0 100 Ambient temperature, C 200 300 Load voltage, V 400 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz, 30 mVrms; Ambient temperature: 25C 77F 1.4 Turn off time, ms Turn on time ms 1.2 1.0 0.8 0.6 0.18 0.14 AQW224N 0.10 AQW227N 0.4 10 0 20 30 40 50 0 60 12 10 8 6 4 AQW227N 0.06 AQW224N, AQW227N 0.2 0 Output capacitance, pF 0.22 2 0 10 20 30 40 50 60 LED forward current, mA LED forward current, mA 13. Isolation characteristics (50 impedance) 14. Insertion loss characteristics (50 impedance) Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 0 AQW224N 0 20 40 60 80 100 Applied voltage, V 6 5 Insertion loss, dB Isolation, dB 100 80 60 AQW224N 40 AQW227N 20 0 AQW224N 4 3 AQW227N 2 1 4 10 5 10 6 10 Frequency, HZ ds_x615_en_aqw22n: 181206J 7 10 0 104 105 106 Frequency, HZ 7 10 3