F-219 (Rev 15APR19) SLH-010-1.50-G-D-A TLH-010-0.50-G-D-A-K TLH-030-0.50-G-D-A SLH-020-1.50-G-D-A-K (0.50 mm) .0197" TLH, SLH SERIES ULTRA-LOW PROFILE TERMINAL TLH Mates with: SLH SLH Mates with: TLH NO. OF POSITIONS LEAD STYLE -010, -020, -030 =0.50 mm TLH SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?TLH or www.samtec.com?SLH PLATING OPTION -0.50 (1.94) .076 = Alignment Pin = 10 " (0.25 m) Gold in contact, Gold flash on tail No. of positionsper row (3.64) x (0.50) .01969 .143 + (3.00) .118 OPTION -K = (3.00 mm) .118" DIA Polyimide Film Pick & Place Pad (4.70) .185 (1.24) .049 (0.50) .0197 (0.38) .015 PROCESSING (0.68) .027 (0.20) .008 (1.43) .056 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm)TM .004" max Board Stacking: For applications requiring two or more connectors per board, contact ipg@samtec.com (5.00) .197 (0.80) .032 -A OPTION HIGH-SPEED CHANNEL PERFORMANCE -030 POSTIONS SHOWN TLH/SLH @ 2 mm Mated Stack Height Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality OPTION -A -G (Per Row) Insulator Material: Black Liquid Crystal Polymer Contact Material: Copper Alloy Plating: Au over 50 " (1.27 m) Ni Current Rating: 2.1 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes D NO. OF POSITIONS LEAD STYLE -010, -020, -030 = 1.50 mm SLH PLATING OPTION D OPTION 28 G b p s OPTION FILE NO. E111594 -1.50 -A -G = Alignment Pin = 10 " (0.25 m) Gold in contact, Gold flash on tail (Per Row) No. of positions per row x (0.50) .01969 + (4.06) .160 (4.70) .185 (0.50) .0197 (0.15) .006 Note: Some lengths, styles and options are non-standard, non-returnable. (1.83) .072 (0.73) .029 (5.00) .197 -30 POSTIONS SHOWN (0.80) .032 -A OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. -K = (3.00 mm) .118" DIA Polyimide Film Pick & Place Pad