CAT.8100Y
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus
rated ripple current is applied for 2000 hours at 85°C,
the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 85°C
for 1000 hours and then performing voltage treatment
based on JIS C 5101-4 clause 4.1 at 20°C, they shall
meet the characteristic requirements listed at right.
Capacitance change
Leakage current
tan δWithin ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
Leakage current
tan δWithin ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Stability at Low Temperature
Tangent of loss angle (tan δ)
Endurance
–
40 to + 85°C (160 to 250V),
–
25 to + 85°C (400 to 450V)
Category Temperature Range
ALUMINUM ELECTROLYTIC CAPACITORS
LGseries
Snap-in Terminal Type, 85°C Smaller-Sized
One rank smaller case sized than LN series.
Suited for equipment down sizing.
Compliant to the RoHS directive (2002/95/EC).
Specifications
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Marking Printed with white color letter on black sleeve.
160 to 450V
120 to 3900µF
±20% at 120Hz, 20°C
I(µA)(
After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF)V : Voltage (V)]
Measurement frequency : 120Hz
400
•
450
8
Z
–
25°C/Z+20°C
Rated voltage(V)
Impedance ratio
ZT/Z20 (MAX.)
160 to 250
4
Minimum order quantity : 50pcs.
The other terminal is also available upon request.
Please refer to page 265 for schematic of dimensions.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
tan δ (MAX.) 160 to 400
0.15 450
0.20