Precision Edge(R) PrecisionSY100EL29V Edge(R) 5V/3.3V DUAL DIFFERENTIAL DATA AND CLOCK D FLIP-FLOP w/SET AND RESET Micrel, Inc. SY100EL29V FEATURES 3.3V and 5V power supply option Differential D, CLK and Q Extended VEE range of -3.0V to -5.5V Precision Edge(R) DESCRIPTION VBB output for single-ended use 1100MHz min. toggle frequency Asynchronous Reset and Set Fully compatible with Motorola MC100LVEL29 and MC100EL29 Available in 20-pin SOIC package The SY100EL29V is a dual differential register with differential data (inputs and outputs) and clock. The registers are triggered by a positive transition of the positive clock (CLK) input. A HIGH on the Reset (Rx) asynchronously resets the appropriate register so that the Q outputs go LOW. A HIGH on the Set (S x ) asynchronously resets the appropriate register so that the Q outputs go HIGH. The Set and Reset inputs cannot both be HIGH simultaneously. The differential input structures are clamped so that the inputs of unused registers can be left open without upsetting the bias network of the devices. The clamping action will assert the /D and the /CLK sides of the inputs. The noninverting input will pull down to VEE and the inverting input will be biased around VCC/2. Because of the edge-triggered flip-flop nature of the devices, simultaneously opening both the clock and data inputs will result in an output which reaches an unidentified but valid state. The fully differential design of the devices makes them ideal for very high frequency applications where a registered data path is necessary. PIN NAMES TRUTH TABLE Pin Function R S CLK, /CLK Differential Clock Inputs D L L L D[0:1], /D[0:1] Differential Data Inputs L L H Q[0:1], /Q[0:1] Differential Data Outputs H L X R0, R1 Reset Inputs L H S0, S1 Set Inputs H H VBB VBB Reference Output VCC VCC VEE VEE CLK Q /Q Z L H Z H L X L H X X H L X X Undef Undef NOTE: Z = LOW-to-HIGH Transition Precision Edge is a registered trademark of Micrel, Inc. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 Rev.: E 1 Amendment: /0 Issue Date: March 2006 Precision Edge(R) SY100EL29V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) Package Type Operating Range Package Marking Lead Finish SY100EL29VZC Z20-1 Commercial SY100EL29VZC Sn-Pb SY100EL29VZCTR(2) Z20-1 Commercial SY100EL29VZC Sn-Pb SY100EL29VZI Z20-1 Industrial SY100EL29VZI Sn-Pb SY100EL29VZITR(2) Z20-1 Industrial SY100EL29VZI Sn-Pb SY100EL29VZG(3) Z20-1 Industrial SY100EL29VZG with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL29VZGTR(2, 3) Z20-1 Industrial SY100EL29VZG with Pb-Free bar-line indicator Pb-Free NiPdAu Part Number Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. R0 VCC Q0 20 19 18 Q R D 1 D0 2 Q0 17 S0 16 S1 VCC Q1 15 14 13 Q Q S CLK 3 4 5 6 Q R CLK S D D0 CLK0 CLK0 VBB D1 7 8 2 9 10 D1 CLK1 CLK1 R1 20-Pin Wide SOIC (Z20-1) M9999-031306 hbwhelp@micrel.com or (408) 955-1690 Q1 VEE 12 11 Precision Edge(R) SY100EL29V Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol VEE VIN (3) Rating Value Unit Power Supply (VCC = 0V) -8.0 to 0 VDC Input Voltage (VCC = 0V) 0 to -6.0 VDC IOUT Output Current -Continuous -Surge 50 100 mA TLEAD Lead Temperature (soldering, 20sec.) +260 C TA Operating Temperature Range -40 to +85 C -5.7 to -3.0 V VEE Operating Range(1),(2) Notes: 1. Absolute maximum rating, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. 2. Parametric values specified at: 100EL29V Series: -3.0V to -5.5V. 3. In PECL mode operation, VI (Max) = VCC. DC ELECTRICAL CHARACTERISTICS VEE = -3.0V to +5.5V; VCC = GND TA = -40C Symbol Parameter TA = 0C TA = +25C TA = +85C Min. Max. Min. Max. Min. Typ. Max. Min. Max. Unit IEE Power Supply Current -- 50 -- 50 -- 30 50 -- 50 mA IIH Input HIGH Current -- 150 -- 150 -- -- 150 -- 150 A IIL Input LOW Current /CLK, /Dn 0.5 -300 -- -- 0.5 -300 -- -- 0.5 -300 -- -- -- -- 0.5 -300 -- -- A VBB Output Reference Voltage -1.38 -1.26 -1.38 -1.26 -1.38 -- -1.26 -1.38 -1.26 V M9999-031306 hbwhelp@micrel.com or (408) 955-1690 3 Precision Edge(R) SY100EL29V Micrel, Inc. AC ELECTRICAL CHARACTERISTICS VEE = -3.0V to +5.5V; VCC = GND TA = -40C Symbol Parameter TA = 0C TA = +25C TA = +85C Min. Max. Min. Max. Min. Typ. Max. Min. Max. Unit fMAX Max. Toggle Frequency 1.1 -- 1.1 -- 1.1 -- -- 1.1 -- GHz tPD Propagation Delay to Output 480 450 680 670 490 450 690 670 500 450 -- -- 700 670 520 450 720 670 ps tS Set-Up Time, D 200 -- 200 -- 200 -- -- 200 -- ps tH Hold Time, D 150 -- 150 -- 150 -- -- 150 -- ps tRR Reset Recovery Time 300 -- 300 -- 300 -- -- 300 -- ps tPW Minimum Pulse Width CLK, Set, Reset 400 -- 400 -- 400 -- -- 400 -- ps VCMR Common Mode Range(1) <500mV 500mV -2.0 -1.8 -0.4 -0.4 -2.1 -1.9 -0.4 -0.4 -2.1 -1.9 -- -- -0.4 -0.4 -2.1 -1.9 -0.4 -0.4 VPP (AC) Minimum Input Swing(2) 150 -- 150 -- 150 -- -- 150 -- mV tr tf Output Rise/Fall Time Q (20-80%) 280 550 280 550 280 330 550 280 550 ps CLK S, R V Notes: 1. VCMR is referenced to the most positive side of the differential input signal. Normal operation is obtained when the input signals are within the VCMR range and the input swing is greater than VPP(Min.) and <1V. The lower end of the VCMR range varies 1:1 with VEE. The numbers in the spec table assume a nominal VEE = -3.3V. Note for PECL operation, the VCMR(Min) will be fixed at 3.3V - |VCMR(Min)|. 2. Minimum input swing for which AC parameters are guaranteed. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 4 Precision Edge(R) SY100EL29V Micrel, Inc. 20-PIN SOIC .300" WIDE (Z20-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 5