E3X-DA11TW-S - Omron - Datasheet.Directory

Digital Fiber Sensors

E3X-DA-S

Perfection Transcended!

A Wealth of Advanced Functions

for Easy and Reliable Application

CSM_E3X-DA-S_MDA_DS_E_3_1

The industry's first Power Tuning Function in a digital sensor.

Evolution and Perfection

The next-generation platform for a wide range of sensing

2 3

Large, Easy-to-Read Displays that are clear even from a distance.

Seven convenient display formats.

Stable long-term performance achieved with

OMRON's Auto Power Control (APC) function.

A wide array of Advanced Functions for even more applications.

The same Ease-of-Use as the E3X-DA-N Amplifier.

Environmentally

Friendly design.

Improved Mobile Console.

Patent Pending

Large, Easy-to-Read Displays: Clear Even from a Distance

Incident level

Threshold level

Function Setting

Industry's largest

characters: 6 mm

(like earlier models)

Function numbers

added to function

items.

Settings are now reversible.

Seven Convenient Display Formats

An incident level/threshold display, percentage/threshold display, and large bar graph display

have been added, so you can select the best display method for the application.

Display the peak level when light was brightest and bottom level when light was

dimmest. The digital levels of high-speed objects can be read precisely.

(Refreshing the hold level was changed from a fixed time to synchronizing with

the output, so the peak and bottom hold values can be checked with certainty.)

Threshold

level

Patent Pending

Without workpiece

With workpiece

Transparent workpiece

Incident level

does not change. Incident level changes.

Detection is not possible Incident level Threshold level Incident level Threshold level Bar display

4 5

Industry's First Power Tuning Function in a Digital Sensor.

Settings can be made more simply and confident-

ly with two digital displays. For example, the

threshold value can be changed while reading the

incident level or a setting can be changed while

confirming the setting's function item number.

The displays are large and easy-to-read,

despite the small case.

High-speed mode

Short-distance mode

Standard mode

Long-distance mode

Super-long-distance mode

The best mode for each application was

selected from several power modes.

The Sensor can be used immediately without

setting the mode.

If the incident light level is too high or too low,

just press the Mode key to achieve the optimum

status.

Change the threshold level while read-

ing the incident level.

Verify the difference between the inci-

dent level and threshold level while set-

ting the threshold level.

Check the incident level intuitively. Ideal

when it is better to view an analog dis-

play instead of the actual digital level.

Incident level Peak hold

Simultaneously display the peak hold level and

present incident level. The optical axis can be

adjusted more easily and surely by checking the

peak hold level while adjusting the optical axis.

Incident Level/Threshold Display Percentage/Threshold Display Large Bar Graph Display

Detecting missing tablets

RUN mode

SET mode

Incident Level/Peak Hold Display Peak Hold/Bottom Hold Display

1350 1280

2010 2055

Incident level

Threshold level

Press

Earlier Method New Method

Large, bright

operation indicator

(like earlier models)

Power tuning indicator added

to indicate setting status.

No power modes

Up to 1/25 reduction

Up to 5-fold increase

Detection is possible.

Press

No incident light

Incident light

No complicated mode settings.

Troublesome power adjustments have been eliminated, so it isn't necessary

to select from power mode settings, such as long-distance mode, standard

mode, and short-distance mode. When the MODE Key is pressed once, the

power tuning function shifts the power level so that the present incident level

is set to the ideal level (2000 on the digital display.)

Insufficient light or saturation at short distances can be corrected.

The power tuning range is extended to the allowable limits to eliminate prob-

lems such as insufficient light or detection failures due to saturation.

If the installation distance is too short, the incident light may saturate (i.e., to

a digital incident level of 4,000), preventing detection. The power can be

tuned down to 1/25th of the default setting for stable detection even at close

range.

Variations between different Sensors can be eliminated.

Threshold levels had to be set and maintained separately for individual Sen-

sors due to variations in the digital light levels measured by each Sensor.

With power tuning, the incident level can be fine-tuned so the same thresh-

old level can be set for each Sensor in an application. Maintenance is also

simplified because it is easier to recognize measurement levels that have

shifted during operation.

Appropriate

Saturated

Incident

insufficient

Digital light levels vary due to individual

differences in the Sensors, so the

threshold levels must be set individually.

All of the Amplifiers are set to the same digi-

tal light level, so the same threshold level

can be set and maintained for the Sensors.

In addition to our unique APC circuit used in the

E3X-DA-N Amplifiers to compensate for the dete-

rioration of the LED, the E3X-DA-S uses 4-ele-

ment LEDs to counteract the deterioration of the

light-emitting elements over time and achieve the

industry's most stable long-term detection perfor-

mance.

Furthermore, the circuit is designed with excess

light capacity, so the Sensors can be used with

high stability regardless of whether the APC cir-

cuit is ON or OFF.

With the Twin-output Amplifiers, output 2 can function as an

alarm output (light level operation) to indicate when the light

level has changed due to dirt or other causes.

Time

OMRON provides the industry's most stable long-term detection

by using new 4-element LEDs and an APC (Auto Power Control) circuit.

Time

Without APC circuit Without APC circuit

3-element LED and APC 4-element LED and APC

Earlier Method New Method

Time

Light Level Operation

(Normal Operation)

Judges light level changes by comparing

the incident level and threshold level.

Differential Operation

Judges light level changes by comparing the

incident level to a time-averaged incident level.

Threshold level

(absolute value)

Light level difference

(absolute value)

Incorrect operation due to light level change

The light level varies due to dirt, temperature

variations, or other environmental factors.

Detecting differences in the light level enables

setting more subtle light level differences.

Incident

level

Incident

level

Output

OFF

Time

2000

1000

Threshold 1

Threshold 2

The counter function can output signal after counter

counts up or down.

(Advanced External-input Models)

Counter Function

Highest Level of Stability

Stable, Long-term Performance with OMRON's APC Function Many Advanced Functions for Even More Applications

Patent Pending

Incorrect operation Minute changes are

detected reliably.

Area output function can be

used for range judgement.

(Advanced Twin-output Models)

Remote input function can control the Sensor remotely.

(Advanced External-input Models)

Provides high-speed response for miniature workpieces, such as chip parts and devices with short tact times.

Operations that required multiple Sensors, such as

height measurement, can be performed with just one

Sensor. Two threshold levels can be set to easily output

within-range and out-of-range outputs.

A counter function is built-in, so the number

of workpieces can be counted without a sep-

arate counter or small PLC that used to be

required.

Input signals can make various remote settings, such as teaching operations, power tuning, and emitter

OFF. This model is ideal for diverse needs, such as checking Sensor operation remotely before operation

or making settings remotely because teaching has to be performed often for frequent workpiece model

changes.

Fastest in the Industry

Three kinds of timer functions are supported. The timers can be set between 1 ms and 5 s.

A one-shot timer is supported in addition to the ON-delay and OFF-delay timers.

The Amplifier's ON time can be fixed, which is useful during high-speed workpiece detection.

Discriminating Tablet Lengths

Detecting Seals

Detecting Leads on Electronic Parts

Detecting Chip Components

6 7

This operation mode uses a special OMRON algorithm to compensate for slight light level changes

due to dirt or temperature variations and detect only the light level changes due to the workpiece.

Area output

Incident

level

Time

Counter

Time

Up Counter Down Counter

Counter

value

Time

Threshold

level

Output when count reaches SV. Output when count reaches 0.

Alarm output

threshold

Alarm output

Long-term stability

Slight light level changes can be detected with stability and

precision, eliminating the need for time-consuming manual ad-

justments for light level changes.

Compensate for the effects of contaminants and temperature variation

with differential operation mode. (Advanced Models)

Incident level

Detecting marks in a dusty environment

Detecting knots in thread

This ECO label is indicated on produts

that meet the environmental standards

established by OMRON.

First in the industry

Optical

communi-

cations

Up to 10 Amplifiers

Display reset to 0.

Incident level

difference = 700

Threshold level

set to 350.

Selectable

Standard mode

Reverse mode

Environmentally friendly features are

essential in truly high-performance products.

During operation

(After 30 s without

an operation)

During operation

(After 30 s without

an operation)

Lights up if an

operation is

performed.

Display not lit. Dimmed display

Cable disposal is not necessary.

Eco-mode

Simplified Connector Design

Reduced Power Wiring Saves Space

Patent Pending

Power supply pin

Optical

commun-

ications

Up to 16 Amplifiers can be connected.

Relay connectors

not required.

Connector models

Prewired models Eliminate the installation time, cost, and

space associated with relay connectors.

Streamlined

wiring

7 cables

Japan patent number 3266198

Lights up if an

operation is

performed.

The Same Ease-of-Use as the E3X-DA-N Environmentally Friendly Design

8 9

Wiring time is significantly reduced.

Relay connectors are unnecessary, so wiring takes up less space.

Storage and maintenance are simpler because it isn't necessary to distin-

guish between master connector and slave connectors on the Amplifier.

Zero reset

Master connector

Slave connector

Close-mounting of up to 10 Sensors

Shift

In Amplifiers with Connectors, the power supply is dis-

tributed to slave connectors through a single master

connector. This design has three major advantages.

Reversible Digital Display (Reverse Mode)

The digital display can be reversed to match the

Amplifier's mounting direction.

Zero reset function immediately

resets the digital display to 0.

The zero reset function can immediately reset the

digital display to 0 at any time. By setting the ref-

erence value to 0, the threshold value can be set

while monitoring differences in incident light lev-

els. The threshold value will also shift simultane-

ously when the zero reset button is pressed.

The E3X-DA-S uses OMRON's own

simplified wiring connectors that

were introduced with the E3X-DA-N.

Patent Pending

Japan patent number 3255229

Output lines only

Power line

Output lines only

Power line

Power is supplied

from the master

Amplifier Unit to

the slave Amplifier

Units through the

Master Connector.

15 cables

Separate power

lines and output

lines are required

for each Amplifier.

Optical communications

prevents mutual interference.

Mutual interference is prevented with optical com-

munications, so up to 10 Amplifiers can be mount-

ed together.

(The number of Amplifiers depends on the operating conditions.)

With Workpiece

Without Workpiece

When the digital display is viewed infre-

quently during operation, current con-

sumption can be reduced by dimming the

display or turning it OFF entirely.

The display will light up again automatical-

ly when an operation key is touched. (Eco-

mode can be set from the Mobile Console

only.)

2The digital display can be turned OFF or dimmed during operation.

The Fiber Sensor is the first in the industry

to use environmentally friendly lead-free

solder.

In addition to saving space and reducing

wiring time, the new connector design

eliminates the need to dispose of cables

together with the Amplifiers.

Cable disposal is not required during maintenance.

Materials containing lead have been completely eliminated.

No lead!

Group teaching

Group Power Tuning

Operation OK

Operation OK Operation OK

Operation OKLocked

Locked Locked

Locked

Application

Set for manual operation.

Set for teaching operation.

Set for teaching

manual operation.

Function Block

Manual setting Teaching

Function setting

Easily set

multiple Sensors.

New and Improved

Fiber Sensor and

Mobile Console.

The Age of User-

customizable Sensors.

Channel 1

Copy channel 1's

contents to all channels.

All of the group's

settings are copied.

Channel 2 Channel 5

Channel 1 All channels

10 11

Can also be used with Photoelectric Sensors with Separate Digital Amplifiers.

E3C-LDA

Photoelectric Sensor with Separate Digital Amplifier

E3X-MC-S

Mobile Console

E3X-DA-S

Digital Fiber Sensor

Manual

Teaching

Teaching +

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Further Improvements to the Mobile Console

Group Power Tuning

Improved Mode Lock Function

Retains all of the Previous Advantages of the Mobile Console.

Machine A

Machine B

Machine D

With the group power tuning function, power tuning is possible

for multiple Sensors at the same time.

Settings can be customized for different applications by locking

out unnecessary function blocks within function settings.

Settings, teaching, and fine-tuning

can be performed at the fiber tip.

The Mobile Console can be used for settings and teaching at

the tip of the fiber. Difficult adjustments can be made while

checking the workpiece position.

Even if the Amplifier and Sensor head are separated during

operation, it is still possible to flash the Sensor head and dis-

play the amplifier channels.

With Group Teaching, Teach Multiple

Amplifiers Simultaneously.

The tedious teaching that had to be performed separately for

each Amplifier can now be performed for several Amplifiers at

once using the Mobile Console.

Copying Settings within the Same Group

Settings such as mode or threshold settings in an Amplifier or

bank can be copied to all of the Amplifiers in the same group.

Copying Settings to Other Groups

The settings for a group of Amplifiers on one machine can be

copied to a group of Amplifiers on another machine.

(The settings can also be copied to and from banks.)

Authorized Distributor:

OMRON Corporation

Industrial Automation Company

Application Sensors Division

Sensing Devices and Components Division H.Q.

Shiokoji Horikawa, Shimogyo-ku,

Kyoto, 600-8530 Japan

Tel: (81)75-344-7068/Fax: (81)75-344-7107

Regional Headquarters

OMRON EUROPE B.V.

Sensor Business Unit,

Carl-Benz-Str. 4, D-71154 Nufringen,

Germany

Tel: (49)7032-811-0/Fax: (49)7032-811-199

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg, IL 60173

U.S.A.

Tel: (1)847-843-7900/Fax: (1)847-843-8568

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,

#11-01, UE Square,

239920 Singapore

Tel: (65)6835-3011/Fax: (65)6835-2711

OMRON CHINA CO., LTD. BEIJING OFFICE

Room 1028, Office Building,

Beijing Capital Times Square,

No. 88 West Chang'an Road,

Beijing, 100031 China

Tel: (86)10-8391-3005/Fax: (86)10-8391-3688

CSM_E3X-DA-S_MDA_DS_E_3_1

In the interest of product improvement, specifications are

subject to change without notice.

This document provides information mainly for selecting

suitable models. Please read the Instruction Sheet

carefully for information that the user must understand

and accept before purchase, including information on

warranty, limitations of liability, and precautions.

E3X-MDA

Super Dual Fiber Sensor

Bringing a new dimension to sensing…

…the 2-channel amplifier has arrived.

Authorized Distributor:

OMRON Corporation

Industrial Automation Company

Sensing Devices Division H.Q.

Industrial Sensors Division

Shiokoji Horikawa, Shimogyo-ku,

Kyoto, 600-8530 Japan

Tel: (81)75-344-7022

Fax: (81)75-344-7107

Regional Headquarters

OMRON EUROPE B.V.

Sensor Business Unit, Carl-Benz-Str. 4,

D-71154 Nufringen, Germany

Tel: (49)7032-811-0/Fax: (49)7032-811-199

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg, IL 60173 U.S.A.

Tel: (1)847-843-7900/Fax: (1)847-843-8568

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue, #11-01, UE Square,

239920 Singapore

Tel: (65)6835-3011/Fax: (65)6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Road (M),

Shanghai, 200120 China

Tel: (86)21-5037-2222/Fax: (86)21-5037-2200

In the interest of product improvement, specifications are subject to change without notice.

This document provides information mainly for selecting suitable models.

Please read the Instruction Sheet carefully for information that the user must understand and accept before purchase, including

information on warranty, limitations of liability, and precautions.

CSM_E3X-DA-S_MDA_DS_E_3_1

Slimmest in the industry — 5 mm per channel.

Checking alignment and mounting

of LCD substrates

Detection and front/back

discrimination of parts

Detection of bends in electronic

component leads

Patent pending

Compact PLC

Sensor Controller

AND/OR AND/OR

1 ch

2 ch Emitting

Receiving

Emitting

Receiving

10 mm

Two Amplifiers squeezed into a body of width

10 mm.

Remarkable space saving of approx. 50%.

Power saving of approx. 40%.

(Savings per channel compared with

existing products.)

Equipped with AND/OR control output. Patent pending

Two types of control output possible with one

Sensor (AND/OR).

Compact PLCs and Sensor Controllers no

longer required.

Flexible control with Mobile Console.

The Mobile Console, which can also be used with the E3X-DA-S,

allows handheld operation of the Fiber Head even when it is

separated from the Amplifier.

Having problems gang-mounting Fiber Sensor Amplifier Units

in tight spaces?

50 mm

100 mm

Half the Space

Incident level

Operation

indicator Channel 1

display

Channel 2

display

Incident level

Operation

indicator

A host of remarkable functions inside a compact body.

A complete lineup of Sensor Heads to handle an even wider

range of applications.

This is the platform for OMRON's sensing technology.

A lineup of Smart Sensors that use

the eddy current method

An improved lineup for smarter sensing

Refinement and a new dimension that

goes beyond superior performance.

Photoelectric Sensors with Separate

Digital Amplifiers have joined the Smart

Sensor family.

High-resolution sensing using laser

and magnetic technology

A common platform for Fiber Sensors

and Sensors with Separate Amplifiers

Laser-type Smart Sensors

ZX-L Series

Inductive Displacement

Smart Sensors

ZX-E Series

Digital Fiber Sensors

E3X-DA-S/MDA Series

Laser-type Photoelectric Sensors

with Separate Amplifiers

E3C-LDA Series

Linear Platform

ON/OFF Platform

Smart Monitor

Mobile Console

Models with Cables

Models with Green LED

Models with Blue LED

Infrared Models

An impressive lineup of Digital Amplifiers to

handle a wide variety of applications.

Standard Models

Models with Connectors

Equipped with OMRON's own easy-wiring connector.

External-input Models

The Sensor can be controlled externally. Equipped with counting function.

(E3X-MC11-S)

(E3X-DA11-S)

(E3X-DA6-S)

(Representative model:

E3X-DAG6-S)

(Representative model:E3X-DAB6-S)

(Representative model:E3X-DAH6-S)

(Representative model:E3X-MDA6)

(Representative model: E3X-DA6TW-S)

The Digital Amplifiers achieve a maximum response time of 48 µs.

Twin-output Models

Two threshold values can be set. Judgement and self-diagnosis

output available.

Advanced Models

Available Soon

Mark-detecting Models and Infrared Models

2-channel Models

Mobile Console

(Representative model:

E3X-DA6RM-S)

A wide variety of color variations available. Equipped

with APC circuit for more stable detection.

NEW Two Amplifiers squeezed into a single, compact Unit.

AND/OR output available.

Maximize Fiber Amplifier potential using remote setting,

copying, and other functionality.

New Models That Counteract the Decline

in Operating Rates Caused by Dust and Dirt

A unique OMRON algorithm has been used that can determine whether

changes have been caused by dust and dirt or by differences in

workpieces.

The threshold value is automatically adjusted by the Sensor according

to changes to increase equipment operating rates by reducing sensing

errors. This is particularly true in applications requiring high-precision

detection.

OMRON's many years of accumulated sensing technology and high-

speed digital processing techniques merge to meet onsite needs. Our

goal is high-performance sensing that provides easy, reliable application.

■ Active Threshold Control (ATC)

Automatically adjusts the threshold value.

■ ATC Error Output (Selectable Function)

Provides an error output when ATC does not adjust

the threshold value.

■ Alarm Output (Selectable Function)

Provides an alarm when maintenance is required.

Digital Laser Sensors

E3C-LDA@AT

Digital Fiber Sensors

E3X-DA@AT- S

Glass substrate detection though

view ports

Chip component detection

■ Fixed Threshold Value (Previous Models)

2000

Digital incident

level

Output OFF

■ Active Threshold Control (ATC Models)

2000 −10%

The value of the threshold is

adjusted every 30 s (see note) to prevent sensing errors.✽

A relative value

is set for the threshold.

Time

1800

Time

An absolute value

is set for the threshold.

Adjustment is required for sensing errors.

✽The monitoring range is set in the Sensor according to the thresh-

old value. The threshold value is adjusted according to changes

within this range.

Advanced ATC Models

Sensing Engine

The Engine for High-performance

Sensing

Intelligently Solve Problems Onsite with

ATC Function

Automatic Compensation for

External Changes

Active Threshold Control (ATC)

Easy-to-read Displays Even at a Distance

Intelligent Display

Fine Sensing

High Performance

Easy Operation

Reliable Detection of Small Workpieces

12-bit A/D converter (4,000 resolution),

high-speed response of 48 µs (Fiber Sensors)

Technology

Digital incident

level

Consistent Emitter Power

Auto Power Control (APC)

Eliminates the Need for Distance Mode Settings

Power Tuning

CSM_E3X-DA-S_MDA_DS_E_3_1

Ordering Information

Ratings and Specifications

NPN output PNP output

E3X-DA41AT-S

E3X-DA8AT-S

E3C-LDA41AT

E3X-DA11AT-S

E3X-DA6AT-S

E3C-LDA11AT

E3X-DA8AT-S E3C-LDA8AT

E3X-DA6AT-S E3C-LDA6AT

Pre-wired Models AT C

ATC error output

Alarm output

AT C

ATC error output

Alarm output

Connector Models

Type

■ Digital Fiber Sensor

■ Separate Digital Amplifier Laser Sensors

Appearance Model

E3C-LDA41AT

E3C-LDA8AT

E3C-LDA11AT

E3C-LDA6AT

Pre-wired Models

Connector Models

Type Appearance

Functions

Item

Type

Model Digital Fiber Sensors Separate Digital Amplifier Laser Sensors

NPN output

PNP output

Response

time

Functions

Operate or Reset: 80 µs Operate or Reset: 100 µs

Operate or Reset: 250 µs

Operate or Reset: 1 ms

Operate or Reset: 4 ms

Active threshold control (used for output 1)

The signal that is output can be selected (used for output 2): ATC error output

The operation when power is turned ON can be selected: No operation, PT, or PT + ATC

Super-high-speed mode

High-speed mode

Standard mode

High-resolution mode

AT C

I/O settings

Startup operation

Basic performance is the same as the Advanced Twin-output Sensors. Refer to E3C-LDA Datasheet (E338) and E3X-DA-S Datasheet (E336) for details.

Only differences from the Advanced Twin-output Sensors have been given above.

Model

PNP outputNPN output

Functions

Operate or Reset: 250 µs

Note:

Authorized Distributor:

Note: Specifications subject to change without notice.

Note: Do not use this document to operate the Unit.

OMRON Corporation

Industrial Automation Company

Application Sensors Division

Sensing Devices and Components Division H.Q.

Shiokoji Horikawa, Shimogyo-ku,

Kyoto, 600-8530 Japan

Tel: (81)75-344-7068/Fax: (81)75-344-7107

Regional Headquarters

OMRON EUROPE B.V.

Sensor Business Unit,

Carl-Benz-Str. 4, D-71154 Nufringen,

Germany

Tel: (49)7032-811-0/Fax: (49)7032-811-199

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg,

IL 60173 U.S.A.

Tel: (1)847-843-7900/Fax: (1)847-843-8568

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,

#11-01, UE Square,

239920 Singapore

Tel: (65)6835-3011/Fax: (65)6835-2711

OMRON CHINA CO., LTD. BEIJING OFFICE

Room 1028, Office Building,

Beijing Capital Times Square,

No. 88 West Chang'an Road,

Beijing, 100031 China

Tel: (86)10-8391-3005/Fax: (86)10-8391-3688

This document provides information mainly for selecting suitable models.

Please read the Instruction Sheet carefully for information that the user must

understand and accept before purchase, including information on warranty,

limitations of liability, and precautions.

CSM_E3X-DA-S_MDA_DS_E_3_1

New Models That Eliminate Worries about

Digital Sensor Setting Mistakes

■ One-key, one-operation concept for easy operation.

■ Threshold value setting with direct operation performed

while monitoring the detection status.

■ Lock function to prevent operating errors through

unintentional operation.

Technology

Digital Fiber Sensors

E3X-DA@SE-S

Easy and Reliable Digital Sensors

with the Same Detection Performance

as Previous Models

Limited-function Models: Simple and Easy

Some people think that digital sensors with their advanced performance

are difficult to use, so we went back to the drawing board to rethink per-

formance and functions.

Without changing basic functions like APC and digital displays, OMRON

created a Digital Fiber Sensor that can be used as easily as the familiar

sensors with sensitivity adjustment knobs.

OMRON's many years of accumulated sensing technology and high-

speed digital processing techniques merge to meet onsite needs.

Our goal is high-performance sensing that provides easy, reliable

application.

Incident level Threshold value

KEY LOCK Switch

OPERATION MODE Selector

Threshold adjustment

Threshold Teaching

With/Without Workpiece: Teaching is performed in two states.

Automatic: Teaching is performed by passing a workpiece.

UP/DOWN Key

TEACH Key

The Engine for High-performance

Sensing

Reliable Detection of Small Workpieces

12-bit A/D converter (4,000 resolution)

Sensing Engine

Consistent Emitter Power

Auto Power Control (APC)

Easy-to-read Displays Even at a Distance

Intelligent Display

Fine Sensing

High Performance

Easy Operation

The Simplest Digital Fiber Sensor

One Key, One Operation

Simple and easy direct operation

CSM_E3X-DA-S_MDA_DS_E_3_1

Ordering Information

Ratings and Specifications

NPN

out

PNP

out

X-DA41

E-

E3X-DA41

E-

3X-DA8SE-S

3X-DA8

E-

X-DA11

E-

E3X-DA11

E-

3X-DA6SE-

3X-DA6

E-

re-wired Models

Connector Models

ppearance

del

ital Fiber

enso

NPN out

PNP

out

Light source

(

wavelength

)

Power supply volta

Power consumption

ontrol outpu

rot

cui

onse t

Sensitivity setting

uto

ower

control

utual interference

reventio

ndicator

Red LED

(

650 nm

)

2 to 24 VD

10%, ri

: 10% max

960 mW max. (Power suppl

: 24 V,

urrent consumption: 40 mA max.)

oad power supply: 26.4 VDC max., Open-collector output, Load current: 50 mA max. (Residual volta

e: 1 V max.)

Power supply reverse polarity protection, Output short-circuit protection

perate or Reset: 1 ms

Teachin

or manual adjustmen

High-speed control method for emission current

Optical communications s

nc, possible for up to 10 Units

peration indicator (oran

Twin di

ital displays (incident level + threshold

)

Basic

erformance is the same as the E3X-DA-S Series. Refer to the E3X-DA-S Datasheet

(

E336

)

for details.

ote:

Authorized Distributor:

Note: Specifications subject to change without notice.

Note: Do not use this document to operate the Unit.

OMRON Corporation

Industrial Automation Company

Application Sensors Division

Sensing Devices and Components Division H.Q.

Shiokoji Horikawa, Shimogyo-ku,

Kyoto, 600-8530 Japan

Tel: (81)75-344-7068/Fax: (81)75-344-7107

Regional Headquarters

OMRON EUROPE B.V.

Sensor Business Unit,

Carl-Benz-Str. 4, D-71154 Nufringen,

Germany

Tel: (49)7032-811-0/Fax: (49)7032-811-199

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg,

IL 60173 U.S.A.

Tel: (1)847-843-7900/Fax: (1)847-843-8568

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,

#11-01, UE Square,

239920 Singapore

Tel: (65)6835-3011/Fax: (65)6835-2711

OMRON CHINA CO., LTD. BEIJING OFFICE

Room 1028, Office Building,

Beijing Capital Times Square,

No. 88 West Chang'an Road,

Beijing, 100031 China

Tel: (86)10-8391-3005/Fax: (86)10-8391-3688

This document provides information mainly for selecting suitable models.

Please read the Instruction Sheet carefully for information that the user must

understand and accept before purchase, including information on warranty,

limitations of liability, and precautions.

CSM_E3X-DA-S_MDA_DS_E_3_1

Digital Fiber Sensors

E3X-DA-S/MDA

OMRON’s Next-generation Platform

for a Wide Range of Detection

• Features a Power Tuning function that optimizes light reception at

the press of a button.

• Combines newly de veloped 4-element LEDs with an APC circuit to

ensure stable, long-term LED performa nce.

• Utilizes OMRON’s innovative wire-saving connector.

• 2-channel models achiev e the thinnest profile in the industry, at only

5 mm per channel.

• 2-channel models also offer AND/OR control output.

Be sure to read Safety Precautions on

page 15.

Features

Equipped with an Industry’s First Power Tuning (Optimum Light Setting) Function

The E3X-DA-S/MDA features a Power Tuning function that optimizes

power at the press of a button.

This function easily but securely resolves saturation due to short

sensing distances or insufficient incident light due to long sensing

distances.

In addition, the response speed does not change as mode selection

has tuned the power.

Adoption of Newly Developed 4-Element LEDs and an APC (Auto Power Control) Circuit

Achieves Long-term Reliable Detection at the Highest Level in the Industry

The long-term reliable detection at the highest level in the industry is

achieved with the innovative APC circuit whose performance is

proved by E3X-DA-N series and the newly developed high-power

LEDs (4-element type) to ensure super stable, long-term LED

performance.

Stable performance is always available without the ON/OFF setting of

an APC circuit.

OMRON’s Innovative Wire-saving Connector Inherited from the E3X-DA-N

The amplifier units with connectors sup ply the power to slave

connectors via a master connector. This offers three following

advantages.

Selected from various

power mode according to applications

Up to approx. 1/25 times

Up to approx.

5 times

Incident

level Low

Appropriate

Incident level

Threshold

Saturation

High-speed mode

Short-range mode

Standard mode

Long-range mode

Super-long-range mode

Appropriate

Modeless

Press

Available without mode setting.

Press the MODE key once to

adjust high or low incident levels

to be appropriate.

Conventional New proposal

Conventional Newly developed

Time

No APC circuit No APC circuit

3-element LEDs + APC

4-element LEDs + APC

Incident level

Time

Long-term

stability

1. Greatly reduced wiring work

2. Improved space usability due to the unnecessity of relay

connectors

3. Simple stock management due to the unnecessity of

distinction between master and slave for amplifiers

Wire-saving Connector Model

Reduced Wiring and Space Requirements for Power Lines

Optical

communications

Power supply pin

Relay connector

Relay connector installation work, cost and space are saved.

No relay connector required

Amplifier units with connectors

Amplifier units with cables

The power is

supplied from a

master unit to

slave units via a

master connector.

Power and output

lines are required

respectively.

Up to 16 amplifier units connectable

Master connector

Slave connector

Only output lines

Power line

Output lines

Power lines

Clear 7 lines

15 lines

E3X-DA-S/MDA

Industry Leading Two Amplifiers Loaded in a Small Body

Two amplifiers are loaded in a 10 mm-wide body.

Space usability can be approximately doubled.

In addition, approximately 40% of th e energy can be

saved.

(compared to the value per channel of the former

model)

Simpler Digital Fiber Sensors

Required performance and functions have been reviewed from basic points to improve high-performance

but hard-to-use digital models. Digital fiber sensors, used in the se nse as if using volume type sensors,

are added to the basic functions such as an APC function and digital display.

High-speed and High-resolution Analog Output Supports Wide Variety of Applications

Analog Control Output

The voltage in the range of 1 to 5 V is output according to the incident

level (digital display). Wide variety of applications is possible including

positioning control or difference detection with multiple levels.

High-speed and High Resolution

Detection modes can be switched in accordance with applications.

High-speed response of 80 µs (super-high-speed mode) supports the

positioning controls that require high-speed control.

Area Output Function Area Judgment Is

Possible

Only one sensor is enough for area judgment for height or others that

has required multiple sensors.

Setting two threshold values allows easy output inside and outside

range.

Remote Input Function Sensors Controlled from Outside

Remote settings for teaching/power tuning/light OFF are possible with input signals.

The remote input function meets the diversifying demands such as remote settings made for frequent teaching

due to level change corresponding to workpiece change or remote operation check of sensors before operation.

Equipped with an Industry's First ATC Function that Resolves Problems

at Manufacturing Sites

OMRON’s unique algorithm is equipped to

distinguish dust or dirt and the change of

workpieces. Automatic correction of threshold

values by sensors in accordance with changes

prevents malfunctions and improves the

operating rates of machines. The ATC function

is especially effective for the applications that

require high-resolution detection.

Models available for a wide variety of applications at manufacturing sites

. . . . 2-channel models

Liquid crystal board installation and alignment check

20mm 10mm

2-channel models

E3X-MDA

Current value Threshold value

Key lock switch

Operation mode

selection switch

Threshold value adjustment

Threshold value teaching

Yes/No: Teaching at two points to be detected

Automatic: Automatic teaching by feeding workpieces

UP/DOWN keys

TEACH key

. . . . Simple & Easy Single-function Models

. . . .Advanced Analog

Output Models

ON/OFF

Analog

Sheet Displacement

. . . .Advanced, Twin-output Models Area Output Tablet length detection

2000

1000

Threshold

value 1

Threshold

value 2

Output

OFF

Incident

level

Time

Sticker detection

. . . .Advanced, External-

input Models

. . . .Advanced ATC Models

Fixed Threshold Value Method (Conventional Models)

2000

Incident level

(digital value)

Incident level

(digital value)

Output OFF

Corrected Threshold Value Method (ATC Models)

2000 −10%

Threshold value is corrected every 30 seconds

Malfunctions are prevented

Threshold value

set as a relative

value

Time

1800

Time

Threshold value

set as an

absolute value

Malfunction Adjustment is required

* Monitoring range is defined in sensors according to threshold

values. Threshold values are corrected in this definition range.

E3X-DA-S/MDA

Ordering Information

Amplifier Units

Amplifier Units with Cables (2 m) [Refer to Dimensions on page 17.]

Amplifier Units with Connectors

Ratings and Specifications

Item Appearance Functions Model

NPN output PNP output

Single-function models --- E3X-DA11SE-S 2M E3X-DA41SE-S 2M

Standard models

Timer, Response speed change

E3X-DA11-S 2M E3X-DA41-S 2M

Mark-detecting models

(multiple color light sources)

Green LED E3X-DAG11-S 2M E3X-DAG41-S 2M

Blue LED E3X-DAB11-S 2M E3X-DAB41-S 2M

Infrared LED E3X-DAH11-S 2M E3X-DAH41-S 2M

Advanced m od e l s

External-input

models Remote setting, counter, differential oper-

ation E3X-DA11RM-S 2M E3X-DA41RM-S 2M

Twin-output

models Area output, self-diagnosis, differential

operation E3X-DA11TW-S 2M E3X-DA41TW-S 2M

ATC function

models ATC (Threshold value automatic correc-

tion) E3X-DA11AT-S 2M E3X-DA41AT-S 2M

Analog output

models Analog output models E3X-DA11AN-S 2M E3X-DA41AN-S 2M

2-channel models AND/OR output E3X-MDA11 2M E3X-MDA41 2M

Item Appearance Functions Model

NPN output PNP output

Single-function models --- E3X-DA6SE-S E3X-DA8SE-S

Standard models

Timer, Response speed change

E3X-DA6-S E3X-DA8-S

Mark-detecting models

(multiple color light sources)

Green LED E3X-DAG6-S E3X-DAG8-S

Blue LED E3X-DAB6-S E3X-DAB8-S

Infrared LED E3X-DAH6-S E3X-DAH8-S

Advanced m od e l s

External-input

models Remote setting, counter, differential op-

eration E3X-DA6RM-S E3X-DA8RM-S

Twin-output

models Area output, self-diagnosis, differentia l

operation E3X-DA6TW-S E3X-DA8TW-S

ATC function

models ATC (Threshold value automatic correc-

tion) E3X-DA6AT-S E3X-DA8AT-S

2-channel models AND/OR output E3X-MDA6 E3X-MDA8

Light source Response

time

Control output/input Functions

ON/OFF

output Input Analog

output Power

tuning Timer Interfer-

ence pre-

vention

Differen-

tial detec-

tion counter ATC

Single-function models Red LED 1 ms Only

main --- --- --- --- --- --- ---

Standard models 50 µs to

4ms

Mark-

detecting

models

E3X-DA@G-S Green LED 50 µs to

4ms Only

main --- --- --- --- ---3X-DA@B-S Blue LED

E3X-DA@H-S Infrared LED

Ad-

vanced

models

Twin-output

models

Red LED

50 µs to

4ms Only

main

(1 line)

--- ---

External-input

models 80 µs to

4ms Main +

sub

(2 lines) --- ---

ATC function

models 130 µs to

4ms

Analog output 80 µs to

4ms Only

main

(1 line) --- ---

2-channel models Red LED 130 µs to

4ms

Main +

main

(2 inde-

pendent

lines)

--- --- --- --- ---

E3X-DA-S/MDA

Amplifier Unit Connectors (Order Separately)

Note: Protector seals are provided as accesso r ie s . [Refer to Dimensions on page 19.]

Mobile Console (Order Separately) [Refer to Dimensions on page 20.]

Note: Use the E3X-MC11-SV2 Mobile Consol e for the E3X-DA-S/MDA-series Amplifier Units.

The E3X-MC11-SV2 is an upgraded versi on of the E3X-MC11-S that is fully interchangeable with the older model.

Accessories (Order Separately)

Mounting Bracket [Refer to E39-L/F39-L/E39-S/E39-R.] End Plate [Refer to PFP-

Item Appearance Cable

length No. of con-

ductors Model

Master Connector

2 m

3E3X-CN11

4E3X-CN21

Slave Connector 1E3X-CN12

2E3X-CN22

Appearance Model Remarks

E3X-MC11-SV2

(model number of set)

Mobile Console with Head,

Cable, and AC adapter pro-

vided as accessories

E3X-MC11-C1-SV2 Mobile Console

E3X-MC11-H1 Head

E39-Z12-1 Cable (1.5 m)

Combining Amplifier Units and Connectors

Amplifier Units and Connectors are sold separately. Refer to the following tables when placing an order.

When Using 5 Amplifier Units

Amplifier Unit Applicable Connector (Order Separa tely)

Model NPN output PNP output Master Connector Slave Connector

Single-fun ction models E3X-DA6SE-S E3X-DA8SE-S

+ E3X-CN11 E3X-CN12

Standard models E3X-DA6-S E3X-DA8-S

Mark-detecting models

(multiple color light

sources)

E3X-DAG6-S E3X-DAG8-S

E3X-DAB6-S E3X-DAB8-S

E3X-DAH6-S E3X-DAH8-S

Advanced models E3X-DA6TW-S E3X-DA8TW-S

E3X-CN21 E3X-CN22

E3X-DA6RM-S E3X-DA8RM-S

E3X-DA6AT-S E3X-DA8AT-S

2-channel models E3X-MDA6 E3X-MDA8

Amplifier Units (5 Units) + 1 Master Connector + 4 Slave Connectors

Appearance Model Quantity

E39-L143 1

Appearance Model Quantity

PFP-M 1

E3X-DA-S/MDA

Ratings and Specifications Refer to pages 17 to 20 for dimensions.

Amplifier Units

*1. Communications are disabled if the detection mode is selected duri ng super-high-speed mode, and the communications functions for mutual interf erence prevention

and the Mobile Console will not function.

*2. PNP output is as follows: Operate: 53 µs, reset: 55 µs.

*3. Mutual interference prevention can be used for only up to 6 Unit s if power tuning is enabled.

Type Single-function

models Standard

models Mark-detecting models (multiple color light sources)

Green LED Blue LED Infrared LED

Item Model E3X-DA@SE-S E3X-DA@-S E3X-DAG@-S E3X-DAB@-S E3X-DAH@-S

Light source (wavelength) Red LED (635 nm) Green LED (525 nm) Blue LED (470 nm) Infrared LED

(870nm)

Power supply voltage 12 to 24 VDC ±10%, ripple (p-p) 10% max.

Power consumption 960 mW max. (current consumption: 40 mA max. at power supply voltage of 24 VDC)

Control output Load power supply voltage: 26.4 VDC; NPN/PNP open collector;

load current: 50 mA max.; residual voltage: 1 V max.

Protection circuits Reverse polarity for power supply connection, output short-circuit

Re-

sponse

time

Super-high-

speed mode --- Operate: 48 µs, reset: 50 µs *1, *2

High-speed

mode --- Operate/reset: 250 µs

Standard mode Operate or reset: 1 ms

High-resolution

mode --- Operate or reset: 4 ms

Sensitivity setting Teaching or manual method

Func-

tions

Power tuning --- Light emission power and reception gain, digital control method

Timer function --- Select from OFF-delay, ON-delay, or one-shot timer.

1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,

200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments)

Automatic power

control (APC) High-speed control method for emission current

Zero-reset --- Negative values can be displayed. (Threshold value is shifted.)

Initial reset Settings can be returned to defaults as required.

Mutual interfer-

ence prevention Possible for up to 10 Units *3

Display Operation indicator

(orange) Operation indicator (orange), Power Tuning indicator (orange)

Digital display incident level +

threshold Select from incident level + threshold or other 6 patterns

Display orientation --- Switching between normal/reversed display is possible.

Ambient illumination

(Receiver side) Incandescent lamp: 10,000 lux max.

Sunlight: 20,000 lux max.

Ambient temperature range Operating:Groups of 1 to 2 Amplifiers: −25°C to 55°C

Groups of 3 to 10 Amplifiers: −25°C to 50°C

Groups of 11 to 16 Amplifiers: −25°C to 45°C

Storage: −30°C to 70°C (with no icing or condensation)

Ambient humidity range Operating and storage: 35% to 85% (with no condensation)

Insulation resistance 20 MΩ min. (at 500 VDC)

Dielectric strength 1,000 VAC at 50/60 Hz for 1 minute

Vibration resistance Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions

Shock resistance Destruction: 500 m/s2, for 3 times each in X, Y and Z directions

Degree of protection IEC 60529 IP50 (with Protective Cover attached)

Connection method Pre-wired or amplifier unit connector

Weight (packed state) Pre-wired model: Approx. 100 g, Amplifier unit connector model: Approx. 55 g

Materials Case Polybutylene terephthalate (PBT)

Cover Polycarbonate (PC)

Accessories Instruction manual

E3X-DA-S/MDA

*1. Input Specifications

*2. Communications are disabled if the dete ction mode is selected du ring super-high-speed mode, and t he communications functions for mut ual interference prevention

and the Mobile Console will not function.

*3. PNP output is as follows: Operate: 53 µs, reset: 55 µs.

*4. When counter is enabled: 80 µs for operate and reset respectively.

*5. When differential output is selected for the output setting, the second channel output is 200 µs for operation and reset respecti vely.

*6. Mutual interference prevention can be used for only up to 6 Units if power tuning is enabled.

*7. Mutual interference prevention can be used for up to 5 Units (10 channels) if powe r tuning is enabled.

Type Advanced models 2-channel models

External input mod-

els Twin output mod-

els ATC function mod-

els Analog output mod-

els

Item Model E3X-DA@RM-S E3X-DA@TW-S E3X-DA@AT-S E3X-DA@AN-S E3X-MDA@

Light source (wavelength) Red LED (635 nm)

Power supply voltage 12 to 24 VDC ±10%, ripple (p-p) 10% max.

Power consumption 1,080 mW max. (current consumption: 45 mA max. at power supply voltage of 24 VDC)

Con-

trol

output

ON/OFF output Load power supply voltage: 26.4 VDC; NPN/PNP open collector;

load current: 50 mA max.; residual voltage: 1 V max.

Analog output ---

Control output

Voltage output: 1 to

5VDC

(Connection load

10 kΩ min.)

Temperature charac-

teristics

0.3%F.S./°C

Response speed/re-

peat accuracy

Super-high-speed

mode:

80 µs/1.5%F.S.

High-speed mode:

250 µs/1.5%F.S.

Standard mode:

1 ms/1%F.S.

High-resolution mode:

4 ms/0.75%F.S.

---

Remote control input No-voltage input (contact/non-contact) *1

Protection circuits Reverse polarity for power supply connection, output short-circuit

Re-

sponse

time

Super-high-

speed mode Operate: 48 µs,

reset: 50 µs *2, *3, *4Operate or reset:

80 µs *2Operate or reset:

130 µs *2Operate or reset:

80 µs *2Operate or reset:

130 µs *2, *5

High-speed

mode Operate or reset: 250 µsOperate or reset:

450 µs

Standard mode Operate or reset: 1ms

High-resolution

mode Operate or reset: 4ms

Sensitivity setting Teaching or manual method

Func-

tions

Power tuning Light emission power and reception gain, digital control method

Differential de-

tection

Switchable between single edge and double edge detection mode

Single edge: Can be set to 250 µs, 500 µs, 1 ms, 10 ms, or 100 ms.

Double edge: Can be set to 500 µs, 1 ms, 2 ms, 20 ms, or 200 ms. ---

Timer function Select from OFF-delay, ON-delay, or one-shot timer.

1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments, 200 ms to 1 s set in 100-ms

increments, and 1 to 5 s set in 1 s-increments)

Automatic pow-

er control (APC) High-speed control method for emission current

Zero-reset Negative values can be displayed. (Threshold value is shifted.)

Initial reset Settings can be returned to defaults as required.

Mutual interfer-

ence prevention Possible for up to 10 Units *6Possible for up to 9

Units (18 channels) *7

Counter

Switchable between

up counter and down

counter.

Set count:

0 to 9,999,999

---

Contact input (relay or switch) Non-contact input (transistor)

NPN ON: Shorted to 0 V (sourcing current: 1 mA max.).

OFF: Open or shorted to Vcc. ON: 1.5 V max. (sourcing current: 1 mA max.)

OFF: Vcc - 1.5 V to Vcc (leakage current: 0.1 mA max.)

PNP ON: Shorted to Vcc (sinking current: 3 mA max.).

OFF: Open or shorted to 0 V. ON: Vcc - 1.5 V to Vcc (sinking current: 3 mA max.)

OFF: 1.5 V max. (leakage current: 0.1 mA max.)

E3X-DA-S/MDA

Type Advanced models 2-channel models

External input

models Twin-output mod-

els ATC function mod-

els Analog output

models

Item Model E3X-DA@RM-S E3X-DA@TW-S E3X-DA@AT-S E3X-DA@AN-S E3X-MDA@

Func-

tions I/O setting

External input set-

ting (Select from

teaching, power tun-

ing, zero reset, light

OFF, or counter re-

set.)

Output setting

(Select from channel

2 output, area out-

put, or self-diagno-

sis.)

Output setting (Se-

lect from channel 2

output, area output,

self-diagnosis out-

put, or ATC error

output)

Analog output set-

ting (offset voltage

adjustable)

Output setting

(Select from channel

2 output, AND, OR,

leading edge sync,

falling edge sync, or

differential output)

Display

Operation indicator

(orange), Power

Tuning indicator (or-

ange)

Operation indicator for channel 1 (orange),

Operation indicator for channel 2 (orange)

Operation indicator

(orange),

Power Tuning indi-

cator (orange)

Operation indicator

for channel 1 (or-

ange), Operation in-

dicator for channel 2

(orange)

Digital display Select from incident

level + threshold or

other 7 patterns Select from incident level + threshold or other 6 patterns

Select from incident

level for channel 1 +

incident level for

channel 2 or other 7

patterns

Display orientation Switching between normal/reversed display is possible.

Ambient illumination

(Receiver side) Incandescent lamp: 10,000 lux max.

Sunlight: 20,000 lux max.

Ambient temperature range

Operating: Groups of 1 to 2 Amplifiers: −25°C to 55°C

Groups of 3 to 10 Amplifiers: −25°C to 50°C

Groups of 11 to 16 Amplifiers: −25°C to 45°C

Storage: −30°C to 70°C (with no icing or condensation)

Ambient humidity range Operating and storage: 35% to 85% (with no condensation)

Insulation resistance 20 MΩ min. (at 500 VDC)

Dielectric strength 1,000 VAC at 50/60 Hz for 1 minute

Vibration resistance Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions

Shock resistance Destruction: 500 m/s2, for 3 times each in X, Y and Z directions

Degree of protection IEC 60529 IP50 (with Protective Cover attached)

Connection method Pre-wired or amplifier unit connector

Weight (packed state) Pre-wired model: Approx. 100 g, Amplifier unit connector model: Approx. 55 g

Materials Case Polybutylene terephthalate (PBT)

Cover Polycarbonate (PC)

Accessories Instruction manual

Amplifier Unit Connectors

Item Model E3X-CN11/21/22 E3X-CN12

Rated current 2.5 A

Rated voltage 50 V

Contact re sistance 20 m Ω max. (20 mVDC max., 100 mA max.)

(The figure is for connection to the Amplifier Unit and the adjacent Connec-

tor. It does not include the conductor resistance of the cable.)

No. of insertions Destructio n: 50 times

(The figure for the number of insertions is for connection to the Amplifier Unit

and the adjacent Connector.)

Mate-

rials Housing Polyb u tylene terephthala te (PB T )

Contacts Phosphor bronze/gold-plated nickel

Weight

(packed state) Approx. 55 g Approx. 25 g

Mobile Console

Item Model E3X-MC11-SV2

Applicable

Sensors

E3X-DA-S

E3X-MDA

E3C-LDA

E2C-EDA

Power supply

voltage Charged with AC adapter

Connection

method Connected via adapter

Weight

(packed state) Approx. 580 g (Console

only: 120 g)

Refer to Instruction Manual provided with

the Mobile Console for details.

E3X-DA-S/MDA

Sensing Distance

Through-beam Models (Unit: mm)

*1. The optical fiber for t he E32-T17L is 10 m long on each side, so the value is 20,000 mm

*2. The optical fiber is 2 m long on each side, so the sensing di stance is 4,000 mm.

Model E3X-DA@-S E3X-MDA@

Type

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

Standard

models

Flexible

(new

standard)

E32-T11R/E32-T12R/E32-T15XR/

E32-TC200BR(B4R) 700 530 350 140 450 350 230 140

E32-T14LR/E32-T15YR/E32-T15ZR 270 210 130 50 170 130 85 50

E32-T21R/E32-T22R/E32-T222R/

E32-T25XR/E32-TC200FR(F4R) 160 130 75 30 100 75 50 30

E32-T24R/E32-T25YR/E32-T25ZR 60 50 25 10 35 27 18 10

Standard

E32-TC200/E32-T12/E32-T15X/

E32-TC200B(B4) 1,000 760 500 200 650 500 330 200

E32-T14L/E32-T15Y/E32-T15Z 600 460 300 120 390 300 200 120

E32-TC200A 900 680 450 180 580 450 300 180

E32-TC200E/E32-T22/E32-T222/

E32-T25X/E32-TC200F(F4) 270 220 125 50 170 130 85 50

E32-T24/E32-T25Y/E32-T25Z 160 130 75 30 100 70 45 30

Break-

resistant

E32-T11/E32-T12B/E32-T15XB 900 680 450 180 580 450 300 180

E32-T21/E32-T221B/E32-T22B 240 200 110 45 150 110 70 45

E32-T25XB 180 150 85 35 125 95 60 35

Fluorine

coating E32-T11U 900 680 450 180 580 450 300 180

Special-

beam

models

Long-

distance,

high power

E32-T17L

20,000*1 20,000*1

10,000 4,000 13,000 10,000 6,500 4,000

E32-TC200 + E39-F1

4,000*24,000*2

2,600 1,500 4,000 3,700 2,400 1,500

E32-T11R + E39-F1

4,000*2

3,700 2,400 970 3,100 2,400 1,600 970

E32-T11 + E39-F1

4,000*2

3,600 2,300 930 3,000 2,300 1,500 930

E32-T14

4,000*2

3,400 2,250 900 2,900 2,200 1,450 900

E32-T11L/E32-T12L 1,700 1,330 870 350 1,100 870 580 350

E32-T11L + E39-F2 910 800 500 180 600 520 340 180

E32-T11R + E39-F2 520 400 250 100 330 260 170 100

E32-T11 + E39-F2 820 660 430 160 530 430 280 160

E32-T21L/E32-T22L 540 440 250 100 340 260 170 100

Ultracom-

pact,

ultrafine

sleeve

E32-T223R 160 130 75 30 110 85 55 30

E32-T33-S5 53 44 25 10 35 28 18 10

E32-T333-S5 1210648654

E32-T334-S5 65324322

Fine beam E32-T22S 2,500 1,900 1,250 500 1,600 1,250 830 500

E32-T24S 1,750 1,300 870 350 1,100 870 580 350

Area sensing

E32-T16PR 1,100 840 560 220 730 560 370 220

E32-T16P 1,500 1,100 750 300 970 750 500 300

E32-T16JR 980 750 480 190 600 480 320 190

E32-T16J 1,300 1,000 650 260 800 650 430 260

E32-T16WR 1,700 1,300 850 340 1,100 860 570 340

E32-T16W 2,300 1,800 1,150 450 1,400 1,100 730 450

E32-T16 3,700 2,800 1,850 740 2,400 1,800 1,200 740

E32-M21 750 610 350 140 470 360 240 140

E3X-DA-S/MDA

* The optical fiber for the E32-T12F is 2 m long on each side, so the sensing distance is 4,000 mm.

Reflective Models (Unit: mm)

Model E3X-DA@-S E3X-MDA@

Type

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

Environ-

ment

resistant

models

Heat-

resistant

E32-T51 1,000 760 500 200 650 500 330 200

E32-T54 300 230 150 60 190 150 100 60

E32-T81R-S 360 280 180 70 230 180 120 70

E32-T61-S + E39-F2 600 450 300 120 390 300 200 120

E32-T61-S + E39-F1 4,000 3,400 2,200 900 3,000 2,200 1,450 900

E32-T84S-S 1,750 1,300 870 350 1,100 870 570 350

E32-T61-S 600 450 300 120 390 300 200 120

Chemical

resistant

E32-T11F 2,500 2,000 1,300 520 1,600 1,300 850 520

E32-T12F 4,000*3,000 2,000 800 2,600 2,000 1,300 800

E32-T14F 500 400 250 100 320 250 160 100

E32-T51F 1,800 1,400 900 350 1,190 920 600 350

E32-T81F-S 920 700 460 190 600 460 300 190

Vacuum

resistant

E32-T51V 260 200 130 50 170 130 85 50

E32-T51V + E39-F1V 1,350 1,000 680 260 850 650 430 260

E32-T54V 210 130 100 35 110 85 55 35

E32-T54V + E39-F1V 660 500 330 180 420 320 210 180

E32-T84SV 630 480 320 130 410 310 200 130

Model E3X-DA@-S E3X-MDA@

Type

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

Standard

models

Flexible

(new stan-

dard)

E32-D11R/E32-D12R/E32-D15XR/

E32-DC200BR(B4R) 300 170 120 50 170 120 80 50

E32-D14LR 80 45 30 14 45 33 22 14

E32-D15YR/E32-D15ZR 70 40 26 12 40 29 19 12

E32-D211R/E32-D21R/E32-D22R/

E32-D25XR/E32-DC200FR(F4R) 50 30 20 8 30 22 14 8

E32-D24R 26 15 10 4 15 10 6 4

E32-D25YR/E32-D25ZR 14852853.32

Standard

E32-DC200/E32-D15X/

E32-DC200B(B4) 500 300 200 90 300 210 130 90

E32-D12 400 230 160 70 230 160 100 70

E32-D14L 200 110 80 36 110 80 50 36

E32-D15Y/E32-D15Z 170 100 65 30 100 70 45 30

E32-D211/E32-DC200E/E32-D22/

E32-D25X/E32-DC200F(F4) 130 80 50 22 80 55 35 22

E32-D24 50 30 20 8 30 22 14 8

E32-D25Y/E32-D25Z 35 20 12 6 20 14 9 6

Break-

resistant

E32-D11/E32-D15XB 300 170 120 50 170 125 80 50

E32-D21B/E32-D221B 110 70 45 20 70 50 30 20

E32-D21/E32-D22B 50 30 20 8 30 22 14 8

E32-D25XB 85 50 30 15 50 35 23 15

Fluorine

coating E32-D11U 300 170 120 50 170 125 80 50

E3X-DA-S/MDA

Model E3X-DA@-S E3X-MDA@

Type

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

Special-

beam

models

Long

distance,

high power

E32-D16 40 to

1,000 40

700 40 to

450 40

240 40

600 40

490 40 to

300 40

240

E32-D11L 650 400 260 110 400 270 180 110

E32-D21L/E32-D22L 210 130 80 35 130 85 55 35

Ultracom-

pact, ultrafine

sleeve

E32-D33 25 16 10 4 16 10 6 4

E32-D331 5320.8321.30.8

Coaxial/small

spot

E32-CC200R 250 150 100 45 150 105 65 45

E32-CC200 500 300 200 90 300 210 140 90

E32-D32L 250 150 100 45 150 100 65 45

E32-C31/E32-D32 120 75 50 22 75 50 30 22

E32-C42 + E39-F3A Spot diameter variable in the range 0.1 to 0.6 mm at distances in the

range 6 to 15 mm.

E32-D32 + E39-F3A Spot diameter variable in the range 0.5 to 1mm at distances in the range

6 to 15 mm.

E32-C41 + E39-F3A-5 0.1-mm dia. spot at a distance of 7 mm.

E32-C31 + E39-F3A-5 0.5-mm dia. spot at a distance of 7 mm.

E32-C41 + E39-F3B 0.2-mm dia. spot at a distance of 17 mm.

E32-C31 + E39-F3B 0.5-mm dia. spot at a distance of 17 mm.

E32-C31 + E39-F3C Spot diameter of 4 mm max. at distances in the range 0 to 20 mm.

Area sensing E32-D36P1 250 150 100 45 150 100 65 45

Retroireflec-

tive

E32-R21 + E39-R3 (provided) 10 to 250

E32-R16 + E39-R1 (provided) 150 to 1,500

Convergent-

reflective

E32-L25/E32-L25A 3.3

E32-L24S 0 to 4

E32-L24L 2 to 6 (center 4)

E32-L25L 5.4 to 9 (center 7.2)

E32-L86 4 to 10

Environ-

ment-

resistant

models

Heat-

resistant

E32-D51 400 230 160 72 230 165 110 72

E32-D81R-S

E32-D61-S 150 90 60 27 90 63 40 27

E32-D73-S 100 60 40 18 60 40 25 18

Chemical-

resistant

E32-D12F 160 95 65 30 95 70 45 30

E32-D14F 70 40 30 10 40 28 18 10

E3X-DA-S/MDA

Application-specific Models (Unit: mm)

* The optical fiber for the E32-T14 is 2 m long on each side, so the sensing distance is 4,000 mm.

Model E3X-DA@-S E3X-MDA@

Type

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

Applica-

tion-

specific

models

Label

detection

E32-G14 10

E32-T14 4,000*3,400 2,250 900 2,900 2,200 1,450 900

Liquid-level

detection

E32-L25T Applicable tube: Transparent tube with a diameter in the range 8 to 10

mm and a recommended wall thickness of 1 mm

E32-D36T Applicable tube: Transparent tube (no restriction on diameter)

E32-A01 Applicable tube: Transparent tube with a diameter of 3.2, 6.4, or 9.5 mm

and a recommended wall thickness of 1 mm

E32-A02 Applicable tube: Transparent tube with a diameter in the range 6 to 13

mm and a recommended wall thickness of 1 mm

E32-D82F1(F2) Liquid-contact model

Glass-

substrate

alignment

E32-L16-N 0 to 15 0 to 12 0 to 15 0 to 12

E32-A08 10 to 20 --- 10 to 20 ---

E32-A07E1(E2) 15 to 25 --- 15 to 25 ---

E32-L66 5 to 18 5 to 16 --- 5 to 18 5 to 14 ---

Glass-

substrate

Mapping

E32-A09/E32-A09H 15 to 38 --- 15 to 38 ---

E32-A09H2 20 to 30 --- 20 to 30 ---

Wafer

mapping

E32-A03/E32-A03-1 1,150 890 600 250 750 580 380 250

E32-T24S 1,750 1,300 870 350 1,100 870 580 350

E32-A04/E32-A04-1 460 340 225 100 300 220 145 100

E3X-DA-S/MDA

Green, Blue, and Infrared Light Sources (Unit: mm)

Model E3X-DAG@-S/DAB@-S E3X-DAH@-S

Type

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

High-

reso-

lution

mode

Stan-

dard

mode

High-

speed

mode

Super-

high-

speed

mode

Through-

beam

models

Standard

E32-T11R/E32-T12R/E32-T15XR/

E32-TC200BR(B4R) 65 50 35 30 280 190 130 55

E32-T14LR/E32-T15YR/E32-T15ZR 25 20 22 12 100 75 80 21

E32-TC200/E32-T12/E32-T15X/

E32-TC200B(B4) 100 75 50 45 400 280 180 80

E32-T14L/E32-T15Y/E32-T15Z 50 40 30 25 240 160 110 45

Special beam E32-T11L/E32-T12L 150 120 85 75 700 490 320 140

Reflective

models

Standard

E32-D11R/E32-D12R/E32-D15XR/

E32-DC200BR(B4R) 17 14 10 8 120 90 60 21

E32-D14LR 4.4 3.5 2.5 2.2 32 24 16 5.5

E32-D15YR/E32-D15ZR 4.2 3.3 2.2 2.1 28 20 13 5

E32-DC200/E32-D15X/

E32-DC200B(B4) 32 25 16 16 200 150 100 35

E32-D14L 11 9 6 5.5 80 60 40 14

E32-D15Y/E32-D15Z 10 85.5 565503311

Special beam

E32-D11L 44 35 22 22 260 190 130 45

E32-CC200R 15 12 8 7.5 100 75 50 17

E32-CC200 32 25 16 16 200 150 100 35

E32-D32L 15 12 8 7.5 100 75 50 17

E32-C31/E32-D32 7.5 6 4 3.5 50 37 25 8.5

Applica-

tion-

specific

models

Label

detection

E32-T14 320 260 220 160 1,800 1,200 820 360

E32-G14 10 10

Refer to E32 Series for details on Fiber Units.

E3X-DA-S/MDA

Output Circuit Diagrams

NPN Output

Note: 1. The ON/OFF regions when areas settings are used with the E3X-

DA@TW-S are as follows:

LIGHT ON: ON when the incident level is betwee n the thresholds for

channels 1 and 2.

DARK ON: OFF when the incident level is between th e thresholds for

channels 1 and 2.

2. Timing Charts for Timer Function Settings (T: Set Time)

3. Control Output (AND, OR, Sync) and Timing Chart for Timer Set tings

(T: Set Time)

Model Operation

mode Timing charts Operation

selector Output circuit

E3X-DA11-S

E3X-DA6-S

E3X-DAG11-S

E3X-DAG6-S

E3X-DAB11-S

E3X-DAB6-S

E3X-DA11SE-S

E3X-DA6SE-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

E3X-DA11TW-S

E3X-DA6TW-S

E3X-MDA11

E3X-MDA6

E3X-DA11AT-S

E3X-DA6AT-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

E3X-DA11RM-S

E3X-DA6RM-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

E3X-DA11AN-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between brown and black leads)

Output

transistor

Load

(relay)

Load

Brown

Black

Blue

Control output

Display

Power

tuning

indicator

(orange)

Operation indicator

(orange)

Photo-

electric

Sensor

main

circuit

12 to

24 VDC

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between brown and black leads)

Output

transistor

Load

(relay)

CH1/

CH2

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Output

transistor

Load

(relay)

(Between brown and black leads)

Load

Brown

Black

Orange

Blue

Display Operation indicator

(orange)

ch 1

Operation indicator

(orange) ch 2

Photo-

electric

Sensor

main

circuit

Control

output 1

Control

output 2

12 to

24 VDC

CH1/

CH2

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Output

transistor

Load

(relay)

(Between brown and black leads)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between brown and black leads)

Output

transistor

Load

(relay)

Brown

Control output

Black

Orange

Blue

Load

Display

Photo-

electric

Sensor

main

circuit

12 to

24 VDC

Operation indicator

(orange)

External

input

Power

tuning

indicator

(orange)

OFF

Operate

Reset

Operation

indicator

(orange)

(Between brown and black leads)

Output

transistor

Load

(relay)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between brown and black leads)

Output

transistor

Load

(relay)

Analog

output

models

12 to

24 VDC

10kΩmin

Display

Power

tuning

indicator

(orange)

Operation indicator

(orange)

Photo-

electric

Sensor

main

circuit

Brown

Black

Orange

Blue

Load

Control output

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between brown and black leads)

Output

transistor

Load

(relay)

ON delay OFF delay One-shot

Incident light

No incident light

OFF

L-ON

D-ON

Incident light

No incident light

OFF

L-ON

D-ON

Incident light

No incident light

OFF

L-ON

D-ON

CH1

CH2

OFF

OUT

(sync)

OUT

(OR)

OUT

(AND)

CH1

CH2

OFF

One-shot

(AND)

OFF delay

(AND)

ON delay

(AND)

E3X-DA-S/MDA

PNP Output

Note: The ON/OFF regions when areas settings are used with the E3X-DA@TW-S are as follows:

LIGHT ON: ON when the incident level is between the thresholds for channels 1 and 2.

DARK ON: OFF when the incident level is between the thresholds for channels 1 and 2.

Model Opera-

tion mode Timing chart Operation

selector Output circuit

E3X-DA41-S

E3X-DA8-S

E3X-DAG41-S

E3X-DAG8-S

E3X-DAB41-S

E3X-DAB8-S

E3X-DA41SE-S

E3X-DA8SE-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

E3X-DA41TW-S

E3X-DA8TW-S

E3X-MDA41

E3X-MDA8

E3X-DA41AT-S

E3X-DA8AT-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

E3X-DA41RM-S

E3X-DA8RM-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

E3X-DA41AN-S

Light-ON LIGHT ON

(L-ON)

Dark-ON DARK ON

(D-ON)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

Load

Brown

Black

Blue

Display

Power

tuning

indicator

(orange)

Operation indicator

(orange)

Photo-

electric

Sensor

main

circuit

12 to

24 VDC

Control

output

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

CH1/

CH2

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

Load

Brown

Black

Orange

Blue

Display Operation indicator

(orange)

ch 1

Operation indicator

(orange) ch 2

Photo-

electric

Sensor

main

circuit

Control

output 1

Control

output 2

12 to

24 VDC

CH1/

CH2

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

Brown

Orange

Black

Blue Load

Display

Photo-

electric

Sensor

main

circuit

12 to

24 VDC

Power

tuning

indicator

(orange)

Operation indicator

(orange)

External

input

Control

output

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

10kΩmin

Analog

output models

Load Load

Control

output

12 to

24 VDC

Display

Power

tuning

indicator

(orange) Photo-

electric

Sensor

main

circuit

Operation indicator (orange) Brown

Orange

Black

Blue

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

(Between blue and black leads)

Output

transistor

Load

(relay)

E3X-DA-S/MDA

Nomenclature

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for ensuring

safety of persons either directly or indirectly.

Do not use it for such purposes.

Do not use the product in atmospheres or environments that exceed

product ratings.

Amplifier Unit

● Designing

Operation after Turning Power ON

The Sensor is ready to detect within 200 ms after the power supply is

turned ON. If the Sensor and load are connected to separate power

supplies, be sure to turn ON the Sensor first.

● Mounting

Connecting and Disconnecting Connecto rs

Mounting Connectors

1. Insert the Master or Slave Connector into the Amplifier Unit until it

clicks into place.

2. Attach the protector seals (provided as accessories) to the sides of

master and slave connectors that are not connected.

Note: Attach the seals to the sides with grooves.

Removing Connectors

1. Slide the slave Amplifier Unit(s) for which the Connector is to be

removed away from the rest of the group.

2. After the Amplifier Unit(s) has been separated, press down on the

lever on the Connector and remove it. (Do not attempt to remove

Connectors without separating them from other Amplifier Units

first.)

Adding and Removing Amplifier Units

Adding Amplifier Units

1. Mount the Amplifier Units one at a time onto the DIN track.

2. Slide the Amplifier Units together, line up the clips, and press the

Amplifier Units together until they click into place.

Removing Amplifier Units

Slide Amplifier Units away from each other, and remove from the DIN

track one at a time. (Do not attempt to remove Amplifier Units from the

DIN track without separating them first.)

WARNING

DOWN

MODE

Lock lever

Locks the fiber.

Main Display (Red)

Incident level, function, etc.

Sub-Display (Green)

Threshold, function settings,

etc.

Operation Keys

Function setting operations

Channel Selector

Use to switch between channels

1 and 2.

Mode Selector

Use to select SET or RUN mode.

Operation indicator for

channel 2 (orange)

ON when output is ON.

OFF when output is OFF.

Operation indicator for

channel 1 (orange)

ON when output is ON.

OFF when output is OFF.

Lock lever

Locks the fiber.

DOWN

MODE

Main Display (Red)

Incident level, function, etc.

Sub-Display (Green)

Threshold, function settings,

etc.

Operation Keys

Function setting operations

Operation Indicator

(orange)

ON when output is

ON.

OFF when output is

OFF.

Power Tuning Indicator

ON: Power tuning is set.

Mode Selector

Use to select SET or RUN mode.

Operation Selector

Use to switch between Light

ON and Dark ON modes.

Amplifier Units

E3X-DA@-S

E3X-DA@RM-S

E3X-DA@AN-S

E3X-DA@TW-S

E3X-DA@AT-S

E3X-MDA@

Precautions for Correct Use

Insert

Seal

Note: 1. The specifications for ambient t emperature will vary a ccording to the

number of Amplifie r Units used togeth er. For details, r efer to Ratings

and Specifications.

2. Always turn OFF the power supply before joining or separating

Amplifier Units.

Remove

Lever

Press down

Click into place

E3X-DA-S/MDA

Mounting the End Plate (PFP-M)

An End Plate should be used if there is a possibility of the Amplifier

Unit moving, e.g., due to vibration. If a Mobile Console is going to be

mounted, connect the End Plate in the direction shown in the following

diagram.

Mounting the Mobile Console Head

Leave a gap of at least 20 mm between the nearest Amplifier Unit and

the Mobile Console head.

Fiber Connection

The E3X Amplifier Unit has a lock button for easy connection of the

Fiber Unit. Connect or disconnect the fibers using the following

procedures:

1. Connection

Open the protective cover, insert the fibers according to the fiber

insertion marks on the side of the Amplifier Unit, and lower the lock

lever.

Fibers with E39-F9 Attachment

Fibers That Cannot Be Free-Cut (with Sleeves)

2. Disconnecting Fibers

Remove the protective cover and raise the lock lever to pull out the

fibers.

● Adjusting

Mutual Interference Protection Function

There may be some instability in the digital display values due to light

from other sensors. If this occurs, decrease the sensitivity (i.e.,

decrease the power or increase the threshold) to perform stable

detection.

EEPROM Writing Error

If the data is not written to the EEPROM correctly due to a power

failure or static-electric noise, initialize the settings with the keys on

the Amplifier Unit. ERR/EEP will flash on the display when a writing

error has occurred.

Optical Communications

Several Amplifier Units can be slid together and used in groups. Do

not, however, slide the Amplifier Units or attempt to remove any of the

Amplifier Units during operation.

● Others

Protective Cover

Always keep the protective cover in place when using the Amplifier

Unit.

Mobile Console

Use the E3X-MC11-SV2 Mobile Console for the E3X-DA-S-series

Amplifier Units.

End Plate

20 mm

9 mm

Insertion position

Locked Unlocked

Protective cover

Lock button

Fiber insertion mark

Fiber

Fiber Unit

9 mm

13 mm

Note: 1. To maintain the fiber properties, confirm that the lock is released

before removing the fibers.

2. Be sure to lock or unlock the lock button within an ambient

temperature range bet ween −10°C and 40°C.

9 mm

13 mm

Locked Unlocked

Protective cover

E3X-DA-S/MDA

Dimensions

Amplifier Units

(Unit: mm)

Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

Main display Sub-display Vinyl-insulated round cable

Standard length: 2 m*

Round ( ): Power tuning indicator

Oblong ( ): Operation indicator for channel 2

*Cable Specifications

CH1

CH2

Operation indicator

Amplifier Units wit h Cables

E3X-DA11-S

E3X-DA41-S

E3X-DAG11-S

E3X-DAG41-S

E3X-DAB11-S

E3X-DAB41-S

E3X-DA11RM-S

E3X-DA41RM-S

E3X-DA11TW-S

E3X-DA41TW-S

E3X-DA11SE-S

E3X-DA41SE-S

E3X-DA11AT-S

E3X-DA41AT-S

E3X-DA11AN-S

E3X-DA41AN-S

E3X-MDA11

E3X-MDA41

Four, 2.4 dia.

4.5

5.65

4.5

3.4

4.3 70

12.5

9.9

34.8

28.1

18.7

44.3 Mounting Bracket (E39-L143)

SUS304 stainless steel

Two, 3.2 dia. holes

Hole for optical communications

Two, 2.4 dia.

4.5

5.65

3.9 × 3

=11.7

12.15

15.1

32.8

3.25

29.8

3.9 × 3 = 11.7

3.4 4.4

1628.1

A *

Two, M3

* The Mounting Bracket can also

be used on this side.

With Mounting Bracket Attached

Mounting Holes

(E3X-DA@-S) (E3X-MDA@)

E3X-DA11-S

-DA41-S

-DAG11-S

-DAG41-S

-DAB11-S

-DAB41-S

4-dia., 3-conducto r (C onductor

cross section: 0.2 mm2, insulator

diameter: 1.1 mm)

E3X-DA11TW-S

-DA41TW-S

-DA11RM-S

-DA41RM-S

4-dia., 4-conducto r (C onductor

cross section: 0.2 mm2, insulator

diameter, 1.1 mm)

E3X-MDA11

-MDA41

4-dia., 2-conducto r (C onductor

cross section: 0.2 mm2, insulator

diameter: 1.1 mm)

E3X-DA-S/MDA

4.5

5.65

4.5

Four, 2.4 dia.

3.4

3.9 × 3

=11.75

12.15

15.1

32.8

3.25

29.8

3.9 × 3 = 11.7

A *1

4.3 70 8.1

12.95

9.9

34.8

28.1

18.7

44.3 Mounting Bracket (E39-L143)

SUS304 stainless steel

Two, 3.2-dia. holes

3.4 4.4

Two, M3

Two, 2.4 dia.

4.5

5.65

Connector

Dia. A*2

*1 The Mounting Bracket can also be

used on this side.

*2 Cable Diameters

1628.1

Hole for optical communications

CH1

CH2

Main display Sub-display

Round ( ): Power tuning indicator

Oblong ( ): Operation indicator for channel 2

Operation indicator

Amplifier Units wit h

onnectors

E3X-DA6-S

E3X-DA8-S

E3X-DAG6-S

E3X-DAG8-S

E3X-DAB6-S

E3X-DAB8-S

E3X-DA6RM-S

E3X-DA8RM-S

E3X-DA6TW-S

E3X-DA8TW-S

E3X-DA6SE-S

E3X-DA8SE-S

E3X-DA6AT-S

E3X-DA8AT-S

E3X-MDA6

E3X-MDA8

(E3X-DA@-S) (E3X-MDA@)

With Mounting Bracket Attached

Mounting Holes

(E3X-DA@-S) (E3X-MDA@)

E3X-CN22

(2 conductors)

E3X-CN21

(4 conductors)

E3X-CN11

(3 conductors)

4.0-mm

dia.

E3X-CN12

(1 conductor) 2.6-mm

dia.

E3X-DA-S/MDA

Amplifier Unit Connectors

Master Connectors

E3X-CN11

E3X-CN21

14.4

2.6

2.9

0.8 8.4

6.8

10.7

50+5

30±2

4 dia.

10±2

15.1

2,000+50

*E3X-CN11: 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm)

E3X-CN21: 4-dia. vinyl-insulated round cable with 4 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm)

Slave Connectors

E3X-CN12

E3X-CN22

14.4

2.6

2.9

0.8 8.4

6.8

10.7

2,000+50

50+5

30±2

E3X-CN12: 2.6 dia.

E3X-CN22: 4 dia.

10±2

15.1

*E3X-CN12: 2.6-dia. vinyl-insulated round cable with 1 conductor (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm)

E3X-CN22: 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm)

E3X-DA-S/MDA

Mobile Console

E3X-MC11-SV2

28.8

13.2

31.2

9.9

27.7

17.3

1.2 5.1 12.3

36.7

51.3

5.6

24.3

30.3

M5 ball plunger

31.8 16.3

13.1

(38.2)

Communications jack

Optical communica-

tions position

Mobile Console HeadMobile Console

136

52.8

Optical communications connection indicato

Menu indicators

AC adapter jack Communications jack

Channel indicator

Main display

Sub-display

RIGHT key

ESC/PWR key

Operation keys

ENT key

LEFT key

UP key

Sensor

operation

indicator

DOWN

key

Battery

indicators

Channel

buttons

Refer to E32 Series for details on Fiber Units.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2008.11

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/