Series AM3T-RZ 3 Watt | DC-DC Converter FEATURES: * * * * RoHS compliant Wide 2:1 input range High efficiency up to 82% Auto recovery short circuit protection * * * * Operating temperature -40oC to + 85oC Input / Output Isolation 1500VDC Pin compatible with multiple manufacturers Low profile metal package Models Single output Model AM3T-1203S-RZ AM3T-1205S-RZ AM3T-1207S-RZ AM3T-1209S-RZ AM3T-1212S-RZ AM3T-1215S-RZ AM3T-1218S-RZ AM3T-1224S-RZ AM3T-2403S-RZ AM3T-2405S-RZ AM3T-2407S-RZ AM3T-2409S-RZ AM3T-2412S-RZ AM3T-2415S-RZ AM3T-2418S-RZ AM3T-2424S-RZ AM3T-4803S-RZ AM3T-4805S-RZ AM3T-4807S-RZ AM3T-4809S-RZ AM3T-4812S-RZ AM3T-4815S-RZ AM3T-4818S-RZ AM3T-4824S-RZ Output Voltage (V) Output Current max (mA) Isolation (VDC) Capacitive load, max (F) Efficiency (%) 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 900 600 417 333 250 200 167 125 900 600 417 333 250 200 167 125 900 600 417 333 250 200 167 125 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 470 470 68 68 47 47 22 22 470 470 68 68 47 47 22 22 470 470 68 68 47 47 22 22 72 76 78 78 80 80 80 80 72 76 79 78 80 82 79 82 72 76 77 78 80 80 80 80 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Capacitive load, max (F) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 450 300 208 167 125 100 84 63 450 300 208 167 125 100 84 63 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 220 220 33 33 22 22 10 10 220 220 33 33 22 22 10 10 72 76 78 80 80 80 78 80 72 78 81 80 82 82 82 82 Input Voltage (V) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 Models Dual output Model AM3T-1203D-RZ AM3T-1205D-RZ AM3T-1207D-RZ AM3T-1209D-RZ AM3T-1212D-RZ AM3T-1215D-RZ AM3T-1218D-RZ AM3T-1224D-RZ AM3T-2403D-RZ AM3T-2405D-RZ AM3T-2407D-RZ AM3T-2409D-RZ AM3T-2412D-RZ AM3T-2415D-RZ AM3T-2418D-RZ AM3T-2424D-RZ www.aimtec.com F 051e R6 Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-RZ 3 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Capacitive load, max (F) Efficiency (%) 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 3.3 5 7.2 9 12 15 18 24 450 300 208 167 125 100 84 63 1500 1500 1500 1500 1500 1500 1500 1500 220 220 33 33 22 22 10 10 72 76 78 78 80 80 78 80 AM3T-4803D-RZ AM3T-4805D-RZ AM3T-4807D-RZ AM3T-4809D-RZ AM3T-4812D-RZ AM3T-4815D-RZ AM3T-4818D-RZ AM3T-4824D-RZ Input Specifications Parameters Voltage range Nominal Typical 12 24 48 9-18 18-36 36-72 Maximum Units VDC (Pi) Network Filter Turn on Transient process time Start up time 350 500 -0.7-24 -0.7-40 -0.7-80 100 12 Vin 24 Vin 48 Vin Absolute Maximum Rating Peak Input Voltage time ms ms VDC ms Isolation Specifications Parameters Tested I/O voltage Case/ Input & Output Resistance Capacitance Conditions Typical 3 sec 1500 1000 > 1000 470 Conditions Typical Maximum Units VDC VDC MOhm pF Output Specifications Parameters Voltage accuracy Voltage balance Dual output Short Circuit protection Short Circuit restart Current limiting Line voltage regulation Load voltage regulation Load voltage regulation 3.3V/3.3V Models Temperature coefficient Ripple & Noise Rising time Maximum 1 1 Units % % Continuous Auto recovery 120% of Iout max LL-HL Load: 10...100% Load: 10...100% 0.5 0.5 1.5 % % % At 20MHz Bandwidth 0.02 60 10 %/oC mV p-p ms General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity 100% load Full Load without Derating 266 www.aimtec.com F 051e R6 Maximum Units 100 KHz o C o C o C 95 % RH -40 to +85 -40 to +125 Free air convection Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-RZ 3 Watt | DC-DC Converter General Specifications (continued) Parameters Conditions Typical Maximum Units Case material Nickel-coated copper Weight 17 g Dimensions(L x W x H) Tolerance 0.5 mm or 0.02 inches 1.28 x 0.84 x 0.41 inches 32.25 x 21.35 x 10.5 mm MTBF >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Safety meet IEC 60950-1:2001 EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Agency Approval Pin Out Specifications Pin 2 3 9 11 14 16 22 23 Dimensions 1500VDC Single Dual -V Input -V Input No pin N.C. +V Output -V Output +V Input +V Input -V Input -V Input Common -V Output +V Output Common +V Input +V Input Test Circuits Conducted Emissions: www.aimtec.com F 051e R6 Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-RZ 3 Watt | DC-DC Converter NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. www.aimtec.com F 051e R6 Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only