Series AM3T-RZ
3 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R6 1 of 4 North America only
FEATURES:
Models
Single output
Model Input Voltage
(V)
Output Voltage
(V)
Output Current
max (mA)
Isolation
(VDC)
Capacitive load,
max (μF)
Efficiency
(%)
AM3T-1203S-RZ 9-18 3.3 900 1500 470 72
AM3T-1205S-RZ 9-18 5 600 1500 470 76
AM3T-1207S-RZ 9-18 7.2 417 1500 68 78
AM3T-1209S-RZ 9-18 9 333 1500 68 78
AM3T-1212S-RZ 9-18 12 250 1500 47 80
AM3T-1215S-RZ 9-18 15 200 1500 47 80
AM3T-1218S-RZ 9-18 18 167 1500 22 80
AM3T-1224S-RZ 9-18 24 125 1500 22 80
AM3T-2403S-RZ 18-36 3.3 900 1500 470 72
AM3T-2405S-RZ 18-36 5 600 1500 470 76
AM3T-2407S-RZ 18-36 7.2 417 1500 68 79
AM3T-2409S-RZ 18-36 9 333 1500 68 78
AM3T-2412S-RZ 18-36 12 250 1500 47 80
AM3T-2415S-RZ 18-36 15 200 1500 47 82
AM3T-2418S-RZ 18-36 18 167 1500 22 79
AM3T-2424S-RZ 18-36 24 125 1500 22 82
AM3T-4803S-RZ 36-72 3.3 900 1500 470 72
AM3T-4805S-RZ 36-72 5 600 1500 470 76
AM3T-4807S-RZ 36-72 7.2 417 1500 68 77
AM3T-4809S-RZ 36-72 9 333 1500 68 78
AM3T-4812S-RZ 36-72 12 250 1500 47 80
AM3T-4815S-RZ 36-72 15 200 1500 47 80
AM3T-4818S-RZ 36-72 18 167 1500 22 80
AM3T-4824S-RZ 36-72 24 125 1500 22 80
Models
Dual output
Model Input Voltage
(V)
Output Voltage
(V)
Output Current
max (mA)
Isolation
(VDC)
Capacitive load,
max (μF)
Efficiency
(%)
AM3T-1203D-RZ 9-18 ±3.3 ±450 1500 ±220 72
AM3T-1205D-RZ 9-18 ±5 ±300 1500 ±220 76
AM3T-1207D-RZ 9-18 ±7.2 ±208 1500 ±33 78
AM3T-1209D-RZ 9-18 ±9 ±167 1500 ±33 80
AM3T-1212D-RZ 9-18 ±12 ±125 1500 ±22 80
AM3T-1215D-RZ 9-18 ±15 ±100 1500 ±22 80
AM3T-1218D-RZ 9-18 ±18 ±84 1500 ±10 78
AM3T-1224D-RZ 9-18 ±24 ±63 1500 ±10 80
AM3T-2403D-RZ 18-36 ±3.3 ±450 1500 ±220 72
AM3T-2405D-RZ 18-36 ±5 ±300 1500 ±220 78
AM3T-2407D-RZ 18-36 ±7.2 ±208 1500 ±33 81
AM3T-2409D-RZ 18-36 ±9 ±167 1500 ±33 80
AM3T-2412D-RZ 18-36 ±12 ±125 1500 ±22 82
AM3T-2415D-RZ 18-36 ±15 ±100 1500 ±22 82
AM3T-2418D-RZ 18-36 ±18 ±84 1500 ±10 82
AM3T-2424D-RZ 18-36 ±24 ±63 1500 ±10 82
• RoHS compliant
•
Operating temperature -40oC to + 85oC
• Wide 2:1 input range • Input / Output Isolation 1500VDC
• High efficiency up to 82% • Pin compatible with multiple manufacturers
• Auto recovery short circuit protection • Low profile metal package
Series AM3T-RZ
3 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R6 2 of 4 North America only
Models
Dual output (continued)
Model Input Voltage
(V)
Output Voltage
(V)
Output Current
max (mA)
Isolation
(VDC)
Capacitive load,
max (μF)
Efficiency
(%)
AM3T-4803D-RZ 36-72 ±3.3 ±450 1500 ±220 72
AM3T-4805D-RZ 36-72 ±5 ±300 1500 ±220 76
AM3T-4807D-RZ 36-72 ±7.2 ±208 1500 ±33 78
AM3T-4809D-RZ 36-72 ±9 ±167 1500 ±33 78
AM3T-4812D-RZ 36-72 ±12 ±125 1500 ±22 80
AM3T-4815D-RZ 36-72 ±15 ±100 1500 ±22 80
AM3T-4818D-RZ 36-72 ±18 ±84 1500 ±10 78
AM3T-4824D-RZ 36-72 ±24 ±63 1500 ±10 80
Input Specifications
Parameters Nominal Typical Maximum Units
Voltage range
12
24
48
9-18
18-36
36-72
VDC
Filter π (Pi) Network
Turn on Transient process time 350 ms
Start up time 500 ms
Absolute Maximum Rating
12 Vin
24 Vin
48 Vin
-0.7-24
-0.7-40
-0.7-80
VDC
Peak Input Voltage time 100 ms
Isolation Specifications
Parameters Conditions Typical Maximum Units
Tested I/O voltage 3 sec 1500 VDC
Case/ Input & Output 1000 VDC
Resistance > 1000 MOhm
Capacitance 470 pF
Output Specifications
Parameters Conditions Typical Maximum Units
Voltage accuracy ±1 %
Voltage balance Dual output ±1 %
Short Circuit protection Continuous
Short Circuit restart Auto recovery
Current limiting 120% of Iout max
Line voltage regulation LL-HL ±0.5 %
Load voltage regulation Load: 10…100% ±0.5 %
Load voltage regulation 3.3V/±3.3V
Models
Load: 10…100% ±1.5 %
Temperature coefficient ±0.02 %/oC
Ripple & Noise At 20MHz Bandwidth 60 mV p-p
Rising time 10 ms
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 266 KHz
Operating temperature Full Load without Derating -40 to +85 oC
Storage temperature -40 to +125 oC
Max Case temperature 100 oC
Cooling Free air convection
Humidity 95 % RH
Series AM3T-RZ
3 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R6 3 of 4 North America only
General Specifications (continued)
Parameters Conditions Typical Maximum Units
Case material Nickel-coated copper
Weight 17 g
Dimensions(L x W x H) Tolerance ±0.5 mm or ±0.02 inches 1.28 x 0.84 x 0.41 inches 32.25 x 21.35 x 10.5 mm
MTBF >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)
NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load
unless otherwise specified.
Safety Specifications
Standards
Safety meet IEC 60950-1:2001
EN55022 Class A, EN55024
IEC61000-4-2, Perf. Criteria B
IEC61000-4-3, Perf. Criteria A
IEC61000-4-4, Perf. Criteria B (external 220uF/100V cap required)
IEC61000-4-5, Perf. Criteria B (external 220uF/100V cap required)
IEC61000-4-6, Perf. Criteria A
Agency Approval
IEC61000-4-8, Perf. Criteria A
Pin Out Specifications Dimensions
Test Circuits
Conducted Emissions:
Pin 1500VDC
Single Dual
2 -V Input -V Input
3 -V Input -V Input
9 No pin Common
11 N.C. -V Output
14 +V Output +V Output
16 -V Output Common
22 +V Input +V Input
23 +V Input +V Input
Series AM3T-RZ
3 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R6 4 of 4 North America only
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. Aimtec may not have conducted destructive testing or chemical analysis on all internal
components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release.
5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which
necessitate specific safety and regulatory standards other the ones listed in this datasheet.
