Features * Portable ESD worksurface that can also be used to transport populated, unsoldered circuit boards W * Static dissipative foam (Rtt 1x104 to < 1x1011 ohms) laminated to Protektive Pak(R) impregnated corrugated material for greater durability * Foam is shuntable, component leads can be kept at equipotential and more stable when moved * Includes 10mm (3/8") grounding snap * Static dissipative material 1x106 to < 1x109 ohms * Buried shielding layer minimizes sloughing and rub-off contamination L * Made in America SPECIFICATIONS FOR CORRUGATED MATERIAL Properties Surface Resistance Discharge Shielding Sloughing Test Typical Values 1 x 106 to < 1 x 109 ohms < 50 nanoJoules Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface Complete recyclability of package Recyclability SPECIFICATIONS FOR FOAM: Property Density Surface Resistance Corrosivity Water Extract Total Chlorine Recommended Operating Temperature Range Tear Strength Tensile Strength Test Method ASTM D3575-91 ANSI/ESD S4.1 TS 1021BA (UK MOD) TS 1021BA (UK MOD) TS 1021BA (UK MOD) Internal ASTM D3575-91 ASTM D2575-91 Results 1.9 lb/ft3 1 x 104 to < 1 x 1011 ohms Pass Pass Pass +200F to -95F 14 lbf/in 44 psi Test Procedures/Method ANSI/ESD STM11.11 ANSI/ESD STM11.31 ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and 1000 grams load Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Item Size - L x W Snap 37800 12" x 18" Male 39852 12" x 18" Female 37801 18" x 24" Male 39854 18" x 24" Female Dimensional Tolerances: +/- 1/8" unless otherwise specified Specifications and procedures subject to change without notice. Made in the United States of America TEK-MATETM BOARD HANDLERS PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578 ProtektivePak.com (c) 2018 DESCO INDUSTRIES INC Employee Owned DRAWING NUMBER 37800 DATE: December 2018