PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578
ProtektivePak.com
DRAWING NUMBER
37800
DATE:
December
2018
TEK-MATE™ BOARD HANDLERS
© 2018 DESCO INDUSTRIES INC
Employee Owned
Features
• Portable ESD worksurface that can also be used to transport
populated, unsoldered circuit boards
• Static dissipative foam (Rtt 1x104 to < 1x1011 ohms) laminated
to Protektive Pak® impregnated corrugated material for greater
durability
• Foam is shuntable, component leads can be kept at equipotential
and more stable when moved
• Includes 10mm (3/8”) grounding snap
• Static dissipative material 1x106 to < 1x109 ohms
• Buried shielding layer minimizes sloughing and rub-off contamination
• Made in America
Item Size - L x W Snap
37800 12" x 18" Male
39852 12" x 18" Female
37801 18" x 24" Male
39854 18" x 24" Female
SPECIFICATIONS FOR FOAM:
Property Test Method Results
Density ASTM D3575-91 1.9 lb/ft3
Surface Resistance ANSI/ESD S4.1 1 x 104 to < 1 x 1011 ohms
Corrosivity TS 1021BA (UK MOD) Pass
Water Extract TS 1021BA (UK MOD) Pass
Total Chlorine TS 1021BA (UK MOD) Pass
Recommended Operating
Temperature Range Internal +200°F to -95°F
Tear Strength ASTM D3575-91 14 lbf/in
Tensile Strength ASTM D2575-91 44 psi
Made in the
United States of America
SPECIFICATIONS FOR CORRUGATED MATERIAL
Properties Typical Values Test Procedures/Method
Surface Resistance 1 x 106 to < 1 x 109 ohms ANSI/ESD STM11.11
Discharge Shielding < 50 nanoJoules ANSI/ESD STM11.31
Sloughing Test Negligible surface damage at 10 cycles and <5% of surface ASTM D4060 at 70 rpm with CS-17 abrasive-coated
damage at 200 cycles in Taber Abrasion Test. wheels and 1000 grams load
No conductive particles abrased from surface Rockwell International Test Report of January 8, 1992
Recyclability Complete recyclability of package Rockwell International Test Report of January 8, 1992
Dimensional Tolerances:
+/- 1/8" unless otherwise specified
Specications and procedures subject to change without notice.
W
L
