Vicor Corporation Power Solutions Vicor's product line of modular power components and complete power systems includes thousands of combinations of input voltage, output voltage, and power levels, complete with accessory components that integrate other power system functions. Together, these products allow designers around the world to meet their unique power requirements by selecting and interconnecting standard modular parts. The benefits for you are rapid, flexible design of complete power systems at any power level. If you don't find the converter you need from our thousands of predefined DC-DC converters, you can design your own custom product on the web using Vicor's Custom Module Design System. Vicor offers a wide range of solutions with 1 - 20 outputs and autoranging, PFC, or three-phase inputs. There are several chassis sizes to choose from with and without integral cooling fans. Also available from Vicor is a strong offering of front ends and filters to complete your design. Vicor's extensive MIL-COTS product line incorporates the technology and features of our commercial products into a cost-effective alternative for military, aerospace, and other highreliability, harsh-environment applications. Standard inputs of 28, 48, 155, 270, and 375 Vdc are available. Vicor is pioneering the second wave of the power component revolution with the introduction of flexible, high-performance power components: V*I Chips. Factorized Power Architecture provides the means to more efficient power distribution and the V*I Chips provide the building blocks with the right attributes of high density and efficiency, flexibility and fast transient response that enable power architects to more easily design small, high-performance, cost-effective power system solutions. V*I Chip PRMs (regulation), VTMs (transformation and isolation) and BCMs (bus conversion) are available for a wide range of DC-DC conversion and Intermediate Bus Architecture applications. Mil-COTS versions are also available. Vicor Integration Architects (VIAs) provide custom power solutions for communications, industrial, datacom, test equipment, medical diagnostics, and MIL-COTS. Using the extensive Vicor line of DC-DC converters in a modular, building-block design approach, VIAs offer complete solutions to unique power requirements in the shortest possible time. All Vicor products deliver agency-approved reliability and the predictable performance of field-proven power technology, including conformance to RoHS if desired. Vicor is ISO 9001:2000 certified and places heavy emphasis on the "PlanDo-Check-Act" model (PDCA) to foster continuous improvement. This enables proactive actions to be undertaken to improve our technology, our products, our processes, and our service to our customers. Vicor's new Quality Center on vicorpower.com enables quality managers, purchasing agents, and designers to see comprehensive video of Vicor's facilities as well as generate customized ISO 9001:2000 reports about Vicor's quality systems. Be assured that Vicor is always on a continuous quest for the best technical solution for you. And, our commitment to the elegance and affordability of your design is backed up by our global staff of experienced applications engineers. Rely on Vicor as your dedicated design partner. TABLE OF CONTENTS Product Overview Chart ...................................2 - 3 Power Conversion Components (V*I Chips) .... 4 - 7 Bus Converter Module (BCM), Pre-Regulator Module (PRM), Voltage Transformation Module (VTM) Intermediate Bus Converters (IBC).........................8 DC-DC Converters ...........................................9 - 15 Vicor develops new products all the time, so, to keep everyone up-to-date, we've created a special area on vicorpower.com where you can always see "what's new." Just go to vicorpower.com and click on "What's New." It will take you to our new products page. From there you'll be able to link to detailed design information. VICBrick, VI-200 and VI-J00 Series Converter Modules, Battery Charger (BatMod), Maxi, Mini and Micro Series Converter Modules AC-DC Front Ends..........................................16 - 19 Harmonic Attenuator Module (HAM), Alternating Input Module (AIM), Autoranging Rectifier Module (ARM), Filter / Autoranging Rectifier Module (FARM), Modular AC Front-end System (ENMods) Filters ............................................................ 20 - 23 Active EMI Filters (QPI Family), Output Ripple Attenuators (QPO Family), Filter Input Attenuator Module (FIAM), Input Attenuator Module (IAM), Ripple Attenuator Module (RAM), Output Ripple Attenuator Module (MicroRAM) Web ExpressCode Web ExpressCode provides quick access to detailed product information. Web ExpressCode Each product description in the Vicor catalog includes a unique Web ExpressCode. Each code provides direct access to the corresponding, information-rich product pages on vicorpower.com. Just enter the Web ExpressCode into the Web ExpressCode search box on vicorpower.com's homepage. You'll be sent to the exact page you want with access to all related information such as product description, operating specifications, access to data sheets, outline drawings, and product configuration tools. MIL-COTS Products....................................... 24 - 27 Configurable Power Solutions .................... 28 - 42 Web Express Code AC-DC / DC-DC Configurable Power Solutions (VIPAC Power System, RackGuard), DC Input Power Systems (VIPAC Arrays, ComPAC, DC MegaPAC), AC-DC Power Supplies (FlatPAC, FlatPAC-EN, LoPAC Family, MegaPAC Family, PowerBank, Badger), Chassis-mount for VI-200 and VI-J00 Series (MegaMods), Output FrontEnd (PFC FrontEnd), Single Output Power System (PFC FlatPAC) Custom Power Solutions ............................. 43 - 44 Accessories.................................................... 45 - 51 Vicor Quality ........................................................ 52 RoHS Compliance................................................. 53 Online Tools ......................................................... 54 Go directly directly to the tech nical infor mation you need! Mass Customization............................................. 55 Technical and Customer Support .........................57 For contact information, see back cover. U.S. & CANADA ONLY: 800-735-6200 VICORPOWER.COM 1 OVERVIEW V*I Chip Solutions DC-DC Products 330 - 365 Vin BCM 360 - 400 Vin BCM 38 - 55 Vin BCM 36 - 75 Vin PRM 18 - 36 Vin PRM 16 - 50 Vin M-PRM 24 Vdc, 48 Vdc QPI Bus Converter Module 10.3 - 11.4 Vdc @ 240 W Bus Converter Module 11.2 - 12.5 Vdc @ 300 W Bus Converter Module 2.4 - 55 V, Up to 300 W Pre-Regulator Module Up to 240 W VTM Pre-Regulator Module Up to 120 W MIL-COTS Pre-Regulator Module Up to 120 W M-VTM Voltage Transformation Module 0.8 - 55 V Up to 100 A or 300 W MIL-COTS Voltage Transformation Module 1 - 50 V Up to 100 A or 120 W EMI Filter Hot-Swap Controller Component Power Solutions: VI-200 & VI-J00 Series AC-DC Products DC-DC Products Harmonic Attenuator Module Unity Power Factor Universal 85 - 264 Vac DC-DC Converter VI-200 / MI-200 Up to 675 W per module 25 - 200 W per module 1 - 95 Vdc More Power? Add a Booster. Rectifier / EMI Filter Up to 250 W Universal 85 - 264 Vac Autoranging 90 - 132 Vac 180 - 264 Vac Output Ripple Attenuation Module combines active and passive filtering. RAM Filter / Autoranging Rectifier Module Up to 1,000 W VI-200 / MI-200 QPO Another Output? Add a Driver. Autoranging 90 - 132 Vac 180 - 264 Vac Autoranging Rectifier Module QPO provides active filtering to achieve differential noise attenuation. Up to 1,500 W Programmable Current Source DC-DC Products 10 - 400 Vdc 24 Vdc, 28 Vdc 48 Vdc, 270 Vdc, 300 Vdc 24 Vdc, 28 Vdc, 48 Vdc IAM / MI-IAM EMI Filter / Transient Protection Up to 400 W QPI Active EMI Filter Up to 576 W @ 48 V VI-J00 / MI-J00 DC-DC Converter 10 - 100 W per module Component Power Solutions: Maxi, Mini, Micro & VICBrick Series DC-DC Products AC-DC Products Universal 85 - 264 Vac HAM High-Boost Autoranging 90 - 132 Vac 180 - 264 Vac DC-DC Converter Up to 675 W per module Filter / Autoranging Rectifier Module Up to 1,000 W Autoranging 90 - 132 Vac 180 - 264 Vac Autoranging 115 - 230 Vac Input Harmonic Attenuator Module Unity Power Factor Autoranging Rectifier Module Up to 600 W per module 1 - 54 Vdc FARM3 MINIHAM Front-end System for EN Compliance Up to 550 W QPO Up to 300 W per module 1 - 48 Vdc DC-DC Converter Nominal Input 18 - 425 Vdc 24 Vdc, 28 Vdc, 48 Vdc 2 Transient Protection, Inrush Current Limiting EMI Filter Up to 25 A QPI Active EMI Filter Up to 576 W @ 48 V Up to 150 W per module 1 - 48 Vdc 48 Vin VICBrick Up to 220 W per module 1 - 48 Vdc U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Output Ripple Attenuation Module combines active and passive filtering. DC-DC Converter Up to 1,500 W DC-DC Products 28 Vdc, 48 Vdc, 270 Vdc Single wire paralleling for high power, fault tolerant arrays. QPO provides active filtering to achieve differential noise attenuation. OVERVIEW VIPAC Power Systems 90 - 132 Vac 180 - 264 Vac or DC Input 36 - 75 Vdc Maxi 1 - 3 Outputs using Maxi, Mini and Micro Series Modules Up to 900 W Mini Micro LoPAC Family VI-200 VI-J00 85 - 264 Vac 1 - 6 Outputs using VI-200, VI-J00 Series or Maxi, Mini and Micro Series Modules Up to 1,500 W Maxi Mini Micro FlatPAC Family 90 - 132 Vac 180 - 264 Vac 1-3 Outputs using VI-200 Series Modules FlatPAC-EN VI-200 Up to 600 W VI-200 VI-J00 90 - 132 Vac 180 - 264 Vac 1 - 4 Outputs using VI-200, VI-J00 Series or Maxi, Mini and Micro Series Modules Up to 500 W Maxi (425 W for EN compliance) Mini Micro MegaPAC Family VI-200 85 - 264 Vac 3o 208/240 Vac 1 - 20 Outputs using VI-200, VI-J00 and Maxi Series Modules Up to 4,000 W VI-J00 Maxi VIPAC Arrays Maxi DC Inputs 24 Vdc, 48 Vdc, 300 Vdc, 375 Vdc 1 - 4 Outputs using Maxi, Mini and Micro Series Modules Parallel for High Power Up to 750 W Mini Micro MegaMod Family (Chassis Mount) DC Inputs 10 - 400 Vdc 1 - 3 Outputs using VI-200 / MI-200 or VI-J00 / MI-J00 Series Modules VI-J00/ MI-J00 VI-200 / MI-200 Up to 300 W Up to 600 W ComPAC Family DC Inputs 24 Vdc, 28 Vdc, 48 Vdc, 270 Vdc, 300 Vdc 1 - 3 Outputs using VI-200 / MI-200 Series Modules VI-200 / MI-200 Up to 600 W Front-end filtering optimized for communication and defense applications U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 3 V * I CHIP SOLUTION 48 V BCM 48 V PRM Bus Converter Module page 5 ZVS / ZCS isolated Sine Amplitude Converter VTM Pre-Regulator Module Voltage Transformation Module page 6 page 7 48 Vin ZVS buck / boost regulator 48 Vin Sine Amplitude Converter Input: 36 - 75 Vdc 26 - 55 Vdc input range Provides 26 - 55 Vdc output factorized bus for 48 Vin VTMs 0.8 - 55 Vdc outputs Efficiency: Up to 97% High density: Up to 365 A/in3 or 1,095 W/in3 Up to 100 A or 300 W Small footprint: Up to 93 A/in2 or 225 W/in2 125C operation Low weight: 0.5 oz (14 g) Isolation to 2,250 Vdc Input: 38 - 55 Vdc Output: Ten models, 3 to 48 V Power: Up to 300 W (450 W for 1 ms) Efficiency: Up to 97% Efficiency: Up to 97% High density: Up to 1,095 W/in3 (68 W/cm3) High density: Up to 875 W/in3 (55 W/cm3) Small footprint: 1.1 in2 (7.1 cm2) Small footprint: 1.1 in2 (7.1 cm2) 125C operation 125C operation Low weight: 0.5 oz (14 g) Low weight: 0.5 oz (14 g) >3.5 million hours MTBF J-Lead package pick & place / SMD compatible Low noise: No output filtering required <1 s transient response J-Lead package pick & place / SMD compatible Low noise: No output filtering required J-Lead package pick & place / SMD compatible MIL-COTS Version Available - Page 24 MIL-COTS Version Available - Page 24 High Voltage BCM Bus Converter Module 24 V PRM page 5 ZVS / ZCS isolated Sine Amplitude Converter 24 Vin ZVS buck / boost regulator Support EN55022, Class B limits Input: 18 - 36 Vdc Compatible with 48 and 24 V V*I Chips Provides 26 - 55 Vdc output factorized bus for 48 Vin VTMs Efficiency: >99% Up to 65 dB CM attenuation at 1 MHz Up to 80 dB DM attenuation at 1 MHz 7 A models; parallelable for up to 14 A Hot-swap models available Supports AdvancedTCA(R) PICMG3.0 requirements 360 - 400 Vdc to 12 Vdc @ 300 W Efficiency: Up to 97% Efficiency: Up to 95% High density: Up to 1,095 W/in3 Small footprint: 1.1 in2 (7.1 cm2) High density: Up to 438 W/in3 (27 W/cm3) 125C operation Isolation to 4,242 Vdc >2.6 million hours MTBF Low noise: No output filtering required Low weight: 0.5 oz (14 g) J-Lead package pick & place / SMD compatible page 22 330 - 365 Vdc to 11 Vdc @ 240 W Input Filter Module page 6 QPI for V*I Chips Pre-Regulator Module Small footprint: 1.1 in2 (7.1 cm2) 125C operation Low weight: 0.5 oz (14 g) 12,5 x 25 x 4,5 mm LGA package J-Lead package pick & place / SMD compatible 25 x 25 x 4,5 mm package for Hot-swap models BRICK SOLUTION VICBrick IBC Intermediate Bus Converter VICBrick VI-200 / VI-J00 DC-DC Converter page 8 DC-DC Converter page 9 page 10 Up to 600 W 36 - 75 Vdc input Input voltage ranges: 10 - 400 Vdc 96% efficiency @ 9.6 Vdc 100C operation Output voltages: 1 - 95 Vdc 600 W @ 55C, 400 LFM High efficiency 125C operating temperature Low noise Output power (per module): VI-200: 50 - 200 W * VI-J00: 25 - 100 W 400 W/in3 power density Low profile: 0.35" in height Parallelable for higher power 100C operation: 85C for VI-200 Efficiency: Up to 90% Agency approvals: CE Marked cULus, cTUVus MIL-COTS Version 38 - 55 Vdc input range 3.5 MHz switching frequency Up to 84 A/in3 or 185 W/in3 Industry standard footprint Available - Page 25 Maxi / Mini / Micro DC-DC Converter QPI Family QPO Family Input Filter Modules page 14 page 20 24 V input: 18 - 36 Vdc >60 dB CM attenuation at 250 kHz 48 V input: 36 - 75 Vdc >80 dB DM attenuation at 250 kHz 300 V input: 180 - 375 Vdc 375 V input: 250 - 425 Vdc Efficiency: >99% at full load 100C, no derating Surface-mount, LGA package High efficiency Designed to support EN Class B Low-noise ZCS / ZVS Integrated hot-swap in select models Up to 120 W/in3 Current rating supports ATCA(R) blades Front-end Modules MIL-COTS Version Available - Page 25 page 21 Up to 14 A Output Filter Modules Input Filter Modules pages 16 - 17 >30 dB PARD attenuation, 1 kHz to 500 kHz 3 - 30 and 0.5 - 5.5 V input models Up to 20 A Supports precise point-of-load regulation Reduces required number of output capacitors to support dynamic loads User selectable optimization of attenuation, power dissipation, and transient load response Output Filter Modules page 22 page 23 Up to 1,000 W power output 24, 48 and 300 V models 5 - 50 V; Up to 20 A 85 - 264 Vac input Efficiency: Up to 98% 3 - 30 V; Up to 30 A Efficiency: 90 - 98% Efficiency: Up to 98% Agency approvals: CE Marked, cTUVus, cULus Agency approvals: CE Marked, cTUVus, cULus Up to 40 dB attenuation from 60 Hz to 1 MHz Operating temperature: -55C to +100C Operating temperature: -55C to +100C Designed to meet EN Class B, Bellcore and FCC transient and immunity Operating temperature: -55C to +100C Inrush current limiting MIL-COTS Version Available - Page 25 MIL-COTS Version Available - Page 26 MIL-COTS Version Available - Page 26 CONFIGURABLE SOLUTION VIPAC AC-DC or DC-DC Power Solution VIPAC Arrays DC Input Power System page 28 Input voltage ranges: 115/230 Vac or 36 - 75 Vdc Output voltages: 2 - 48 Vdc Output power: Up to 900 W Single, dual, or triple outputs Efficiency: 80 - 90% Local or remote control Agency approvals: CE Marked, cTUVus, cULus FlatPAC AC-DC Power Solution page 29 Input voltages: 24, 48, 300 or 375 Vdc Output voltages: 2 - 48 Vdc Output power: 50 - 600 W Array power: Up to 750 W Single, dual, triple or quad outputs Rugged, low profile, coldplate chassis High-temperature capability Agency approvals: CE Marked, cTUVus, cULus page 30 Input voltage: 115/230 Vac input, autoranging Output voltages: 1 - 95 Vdc Output power: 50 - 600 W Single, dual, or triple outputs Low-noise ZCS / ZVS power technology Agency approvals: CE Marked, cTUVus, cULus MIL-COTS Version Available - Page 27 ComPAC DC-DC Input Power Solution MegaMod Chassis-mount DC-DC Converter page 31 PFC FrontEnd Output Front-end Power Supply page 32 page 34 Input voltages: 24, 48 and 300 Vdc Input voltage range: 10 - 400 Vdc Input voltage ranges: 85 - 264 Vac and 100 - 385 Vdc Output voltages: 1 - 95 Vdc Output voltages: 1 - 95 Vdc Output power: Up to 2,200 W Efficiency: 80 - 90% Output power: Up to 600 W Up to 4 non-isolated outputs Up to 10 W/in3 Single, dual, or triple outputs Low-noise FM control Efficiency: 80 - 90% Operating temperature: - 20C to + 45C (full power) ZCS / ZVS power architecture Low-noise ZCS power architecture DIN rail mountable Agency approvals: CE Marked, cTUVus Agency approvals: CE Marked, cTUVus, cULus Single-Output Power System MIL-COTS Version Available - Page 27 MIL-COTS Version Available - Page 27 PFC FlatPAC Agency approvals: CE Marked, cTUVus, cULus LoPAC Family Switcher Power Supplies page 35 User-Config. Power Supplies page 36 Input voltage range: 85 - 264 Vac Output power: Up to 600 W 2 - 54 Vdc Output voltages: 2 - 95 Vdc (higher voltage available with series arrays) High efficiency Output power: 25 - 1,500 W Current limit Remote sense Agency approvals: CE Marked, cTUVus, cULus MegaPAC Family Input voltage ranges: 85 - 264 Vac and 100 - 380 Vdc page 38 Input voltage range: 85 - 264 Vac Output voltage: 2 - 95 Vdc (higher voltage available with series arrays) Output power: 25 - 4,000 W Up to 20 outputs Up to 6 user-specifiable outputs High power density Power density up to 11 W/in3 Agency approvals: CE Marked, cTUVus Agency approvals: CE Marked, cTUVus CONFIGURABLE SOLUTION FlatPAC-EN AC-DC Power Solution DC MegaPAC DC-DC Power Switcher page 40 Input voltage ranges: 85 - 132/180 - 264 Vac 180 - 264 Vdc Output voltages: 2 - 95 Vdc Output power: Up to 500 W Up to 4 user-specifiable outputs Autosense / remote sense Agency approvals: CE Marked, cTUVus Javelin Input voltage ranges: 85 - 254 Vac (PFC) / 85 - 380 Vdc Output voltages: Single output 2, 3.3, 5, 12, 15, 24, 28, 48 Vdc Output power: 600 - 5,400 W Agency approvals: CE Marked, cTUVus, cULus page 41 Input voltage range: 12 - 72 Vdc AC Input voltage: 115/230 Vac, Autoranging Output voltages: 2 - 95 Vdc Output power: Up to 1,600 W DC Input voltage: 48 V (38 - 72 V) or 150 V (105 - 200 V) Up to 16 outputs Output: 4 to 48 V Output power: 600 W Agency approvals: CE Marked, cTUVus, cULus Agency approvals: CE Marked, cTUVus AC-DC Low Profile Power Supply page 42 Redundant Input Power Supply page 41 PowerBank MIL-COTS Power Supply RackGuard Badger MIL-COTS Power Supply page 42 Input voltage: 115/230 Vac Output voltages: 1.8 - 52 V Output power: 1000 W @ 230 Vac input 800 W @ 115 Vac input Operating temperature: -20C to +50C at full load Agency approvals: CE Marked, cTUVus, cULus MIL-COTS Version CUSTOM SOLUTION Vicor can deliver a power supply built to your custom specification through our Vicor Integration Architects (VIAs). VIAs design and manufacture turnkey custom power systems for electronic equipment manufacturers in the datacom, telecom, industrial, test equipment, medical, information technology, and MIL-COTS markets. VIAs use Vicor component power in a modular, building-block design approach that offers low cost, quick turnaround, and reliable performance. For more information on custom solutions, see pages 43 - 44. page 42 Input voltage ranges: 85 - 264 Vac and 85 - 380 Vdc Output power: Up to 2,200 W Up to 4 non-isolated outputs Operating temperature: - 20C to + 75C DIN rail mountable Agency approvals: CE Marked, cTUVus, cULus MIL-COTS Version DC-DC vichip Web ExpressCode: V * I Chip The V*I Chip Advantage Density, Efficiency, Flexibility, and Speed Vicor's V*I Chips, new families of integrated power components, give the power architect new ways to create small, cost-effective, high-performance power system solutions. V*I Chips increase power system flexibility by separating or factorizing a DC-DC converter into two components. One component provides a regulation function (PRM), and another provides transformation and isolation (VTM / BCM). This allows the power system designer to select only the functions that are needed, where they are needed. Transformation & Isolation Regulation BCM VTM PRM N N N P P S L N S Product shown at actual size. Pre-Regulator Module Voltage Transformation Module Bus Converter Module DC-DC Conversion Using PRM and VTM Bus Conversion Using BCMs System solution with low component count Enable dense IBA Power Systems VTM isolation and transformation at the point of load High density bus converter > 1,000 W/in3 PRM regulation can be collocated with or remote from the VTM Efficiency: Up to 97% Minimize total system capacitance Efficiency: Up to 93% High power density: Up to 430 W/in3 niPOL LOAD 1/4 the capacitance volume here... L niPOL PRM VTM LOAD BCM L SOURCE N P LOAD N S SOURCE N N S P niPOL L LOAD L niPOL LOAD L ...little or no capacitance needed here. High Current Low Voltage Supply Enable twice the current in half the space Up to 240 W or 200 A High Voltage Outputs VTM N P N Put VTM stages in series to achieve output voltages greater than 55 V PRM VTM PRM SOURCE S High Power Arrays N P N P S LOAD N P N LOAD VTM S N P N LOAD VTM PRM N P S U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM S SOURCE L 4 N L VTM L VTM PRM N L SOURCE Parallel PRMs and VTMs to create multi-kW power systems N S DC-DC Web ExpressCode: bcm V *I Chip Bus Converter Module BCM The Bus Converter Module (BCM) is a member of the new family of V*I Chips. It provides an isolated intermediate bus voltage to power non-isolated POL converters from a narrow range DC input or can be used as an independent DC source. The BCM offers superior performance and lower cost than conventional bus converters. BCMs are available in standard 48 V telecom as well as in high-voltage offline input ranges. Due to the fast response time and low noise of the BCM, the need for limited life aluminum electrolytic or tantalum capacitors at the load is reduced - or eliminated - resulting in savings of board area, materials, and total system cost. Features Fixed-ratio bus converter Output power: Up to 300 W Available in 48, 352, and 384 V inputs Small footprint: 1.1in2 (7.1 cm2) High density: Up to 1,095 W/in3 Pick & place / SMD compatible Isolation to 4,242 Vdc 125C operation Efficiency: Up to 97% >3.5 million hours MTBF No output filtering required Heat Sinks Available See page 49 Part Numbering For a complete listing of our BCM model numbers, go to vicorpower.com/vichip. B 0 4 8 Bus Converter Module Input Voltage 38 - 55 Vdc Input Voltage Designator K Factor 1/16 1/12 1/8 1/6 1/5 1/4 1/3 1/2 2/3 1 Input Voltage K Factor 330 - 365 Vdc 360 - 400 Vdc 1/32 1/32 F Configuration F = J-Lead 1 2 0 Output Voltage Designator ( = Vout X10 ) Product Grade Temperatures Range 2.38 - 3.43 Vdc 3.17 - 4.58 Vdc 4.75 - 6.87 Vdc 6.33 - 9.16 Vdc 7.60 - 11.00 Vdc 9.50 - 13.80 Vdc 12.70 - 18.30 Vdc 19.00 - 27.50 Vdc 25.30 - 36.70 Vdc 38.00 - 55.00 Vdc Vout @ Nom. Vin 11.0 Vdc 12.0 Vdc 3 0 Grade Storage Operating T - 40 to125C - 40 to125C M -55 to125C -55 to125C Vout @ 48 Vin 3.0 Vdc 4.0 Vdc 6.0 Vdc 8.0 Vdc 9.6 Vdc 12.0 Vdc 16.0 Vdc 24.0 Vdc 32.0 Vdc 48.0 Vdc T Range 10.30 - 11.4 Vdc 11.25 - 12.5 Vdc Max Power 210 200 240 240 240 300 240 300 300 300 W W W W W W W W W W Output Power Designator ( = POUT / 10 ) BCM Model No. B048F030T21 B048F040T20 B048F060T24 B048F080T24 B048F096T24 B048F120T30 B048F160T24 B048F240T30 B048F320T30 B048F480T30 Max Power BCM Model No. 240 W 300 W B352F110T24 B384F120T30 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 5 DC-DC prm Web ExpressCode: V*I Chip Pre-Regulator Module PRM The V*I Chip Pre-Regulator Module (PRM) is a high-efficiency non-isolated regulator capable of both boosting and bucking a wide-range input voltage. PRMs may be used independently, as stand-alone regulators, or together with downstream V*I Chip Voltage Transformation Modules (VTMs) -- fast, efficient, isolated low-noise point-of-load (POL) converters. PRMs feature unique "Adaptive Loop" compensation feedback: a single-wire alternative to traditional remote sensing and feedback loops that enables precise control of an isolated POL voltage without the need for either a direct connection to the POL or for noise sensitive, bandwidth limiting, isolation devices in the feedback path. Features ZVS buck / boost regulator Small footprint: 1.1in2 (7.1 cm2) Provides factorized bus for 48 Vin VTMs 125C operation Available in 24 and 48 V models J-Lead package Efficiency: Up to 97% Pick & place / SMD compatible High density: Up to 875 W/in3 MIL-COTS Version Available - Page 24 Heat Sinks Available See page 49 Part Numbering For a complete listing of our PRM model numbers, go to vicorpower.com/vichip. P Pre-Regulator Module 0 4 8 Input Voltage Designator F Configuration F = J-Lead 0 4 8 T 2 4 Nominal Factorized Product Grade Temperatures Bus Voltage Grade Storage Operating T - 40 to125C - 40 to125C M -55 to125C -55 to125C Max Output Input Voltage Power 240 W 120 W 170 W 120 W 36 - 75 Vdc 38 - 55 Vdc 18 - 36 Vdc Current 5.0 A 4.2 A 3.5 A 2.5 A A L Output Power Designator ( = Pf/10 ) Adaptive Loop PRM Model No Trim / Vf Range P048F048T24AL P048F048T12AL P045F048T17AL P024F048T12AL 26 - 55 V Application Examples Vo = VL 1.0% VC PC TM IL NC PR PRM-AL +In +Out -In -Out Vin VC PC TM IL NC PR Vout Regulator 6 VH SC SG OS NC CD PRM-AL +In +Out -In -Out Vin VH SC SG OS NC CD Factorized Bus (Vf) ROS RCD VL (Io*Ro) + K K DC-DC Converter U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM -Out TM VC PC Vf = +Out +In -In VTM +Out K Ro -Out L O A D DC-DC Web ExpressCode: vtm V*I Chip Voltage Transformation Module VTM The Voltage Transformation Module (VTM) provides an isolated voltage to the point of load. Utilizing a Sine Amplitude Converter (SAC), it offers unprecedented performance in the critical areas of speed, noise, efficiency and density. VTMs address output requirements from 0.8 - 55 Vdc at up to 100 A, all in a surface-mount package only one-quarter of a cubic inch in volume. VTMs operate over an input voltage range of 26 - 55 Vdc -- the "factorized bus"-- and are a fixed-ratio device that requires a PRM or other stabilized voltage source for regulation. Features Fixed ratio DC-DC converter Efficiency: Up to 97% Output: Up to 100 A / 300 W High density: Up to 365 A/in3 125C operation 1 s transient response Small footprint: 1.1in2 (7.1 cm2) >3.5 million hours MTBF Low weight: 0.5 oz (14 g) J-Lead package Pick & place / SMD compatible Isolation to 2,250 Vdc (1,095 W/cm3) MIL-COTS Version Available - Page 24 Heat Sinks Available See page 49 Part Numbering For a complete listing of our VTM model numbers, go to vicorpower.com/vichip. V 0 4 8 Voltage Input Voltage Transformation Designator Module Input Voltage K Factor 26 - 55 Vdc 1/32 1/24 1/16 1/12 1/12 1/8 1/6 1/5 1/4 1/3 1/2 2/3 1 F Configuration F = J-Lead 1 2 0 Output Voltage Designator ( = Vout X10 ) 0 2 5 Product Grade Temperatures Grade Storage Operating T - 40 to125C - 40 to125C M -55 to125C -55 to125C Vout @ 48 Vin 1.5 Vdc 2.0 Vdc 3.0 Vdc 3.3 Vdc 4.0 Vdc 6.0 Vdc 8.0 Vdc 9.6 Vdc 12.0 Vdc 16.0 Vdc 24.0 Vdc 32.0 Vdc 48.0 Vdc T Range 0.82 - 1.71 1.09 - 2.29 1.63 - 3.43 2.17 - 4.00 2.17 - 4.58 3.25 - 6.87 4.33 - 8.98 6.00 - 11.00 6.50 - 13.80 8.70 - 18.30 13.00 - 27.50 17.30 - 36.70 26.00 - 55.00 Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Output Current Designator ( = Iout ) Output Current VTM Model No. 100 A 80 A 70 A 60 A 50 A 40 A 30 A 25 A 25 A 15 A 12 A 9A 6A V048F015T100 V048F020T080 V048F030T070 V040F033T060 V048F040T050 V048F060T040 V048F080T030 V048F096T025 V048F120T025 V048F160T015 V048F240T012 V048F320T009 V048F480T006 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 7 DC-DC ibc Web ExpressCode: Bricks Intermediate Bus Converters IBC These "VICBrick" Intermediate Bus Converter (IBC) modules use Vicor's V*I Chip Bus Converter Modules (BCM) to achieve the highest performance for Intermediate Bus Architecture applications. Operating from a 38 - 55 Vdc input, 9 different fixed-ratio outputs are available from 3 to 48 Vdc. You can choose the intermediate bus voltage that is optimal for your system and load requirements. These quarter-bricks are available with a single BCM, rated up to 300 W or 70 A, or with dual BCMs, capable of 600 W or 100 A. Dual output pins are used for output currents over 50 A. Features Up to 600 W 38 - 55 Vdc input range 96% efficiency @ 9.6 Vdc 3.5 MHz switching frequency 600 W @ 55C, 400 LFM Fast dynamic response 100C operating temperature Parallelable, with fault tolerance Industry standard quarter-brick footprint Power density: 500 W/in3 Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. I Format I = IBC Output Voltage 3.0 4.0 6.0 9.6 12.0 16.0 24.0 32.0 48.0 8 0 4 8 Nominal Input Voltage C C = Quarter Brick Nominal Output Voltage ( x10 ) 0 3 0 T Product Grade Temperatures T = - 40 to 125C 0 2 1 Output Power ( /10 ) P 2 Enable Polarity P = "+" M = "-" Package Style K Factor (Transformation Ratio) Full Load Efficiency (%) 94.5 2.0 31,000 F 1/16 94.3 2.0 31,000 F 94.1 93.7 93.5 1.0 2.3 1.2 4.0 2.0 10.0 Full Load Watts Output Amps Bus Converter Model No. Number of BCMs 150 50.0 I048C030T015P1 1 210 70.0 I048C030T021P2 1 300 200 400 240 480 240 100.0 50.0 100.0 40.0 80.0 25.0 I048C030T030P2 I048C040T020P1 I048C040T040P2 I048C060T024P1 I048C060T048P2 I048C096T024P1 2 1 2 1 2 1 480 300 600 50.0 25.0 50.0 I048C096T048P1 I048C120T030P1 I048C120T060P1 2 1 2 240 480 300 600 300 15.0 30.0 12.5 25.0 9.4 I048C160T024P1 I048C160T048P1 I048C240T030P1 I048C240T060P1 I048C320T030P1 1 2 1 2 1 600 18.7 I048C320T060P1 2 34.0 400 F 300 600 6.3 12.5 I048C480T030P1 I048C480T060P1 1 2 150.0 75.0 100 F 200 F 1/12 1/8 94.8 1/5 96.3 1/4 96.0 96.0 1/3 95.7 1/2 95.0 2/3 95.0 1 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 96.3 ROUT (m) Max Load Capacitance 62,000 17,000 34,000 7,600 15,200 3,000 F F F F F F 5.1 13.0 6.5 6,000 F 1,000 F 2,000 F 20.0 10.0 42.0 21.0 67.0 900 1,800 470 940 200 F F F F F DC-DC vicbrick Web ExpressCode: Bricks DC-DC Converters VICBrick These VICBricks are quarter-brick sized, high-performance DC-DC converters that conform to industry-standard footprints and pin-outs, while delivering unprecedented performance in power density, efficiency, transient response, and cost. This superior performance is enabled by the revolutionary V*I Chip technology with its Sine Amplitude Converter topology. Dual output pins are used for output currents over 50 A. Features 36 - 75 Vdc input Up to 84 A/in3 or 185 W/in3 100C operation Industry-standard footprint High efficiency Positive or negative logic enable Low noise 2,250 Vdc basic insulation Only 0.36" in height Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. D 0 4 8 Format Nominal Input Voltage C C = Quarter Brick 0 3 3 Nominal Output Voltage ( x10 ) Product Grade Temperatures T = - 40 to125C Output Input Range Model Number Vnom Imax D048C010T010M2N 1 100 D048C012T012M2N 1.2 100 D048C015T012M2N 1.5 80 T Trim Range 0 1 8 M Output Power ( /10 ) 2 N Enable Polarity P = "+" M = "-" Package Style Efficiency vs. Output Current Typ. Full Load Efficiency (%) 90 48 Vin D048C018T014M2N 1.8 80 D048C025T017M2N 2.5 70 D048C030T016M2N 3.0 55 0.81 - 1.5 Vdc 84 87 1.08 - 2.19 Vdc 88 85 Efficiency (%) 83 80 75 70 0 36 - 75 Vdc D048C033T018M2N 3.3 55 D048C050T018M1N 5.0 36 D048C100T018M1N 10.0 18 D048C120T022M1N 12.0 18.3 D048C150T020M1N 15.0 13.3 D048C240T022M1N 24.0 D048C280T019M1N 28.0 D048C480T022M1N 48.0 1.63 - 3.32 Vdc 89 90 2.17 - 4.0 Vdc 3.25 - 6.67 Vdc 10 20 30 40 50 60 70 80 Output Current (A) Typical efficiency vs. output current 1.5 Vout VICBrick 91 92 92 6.5 - 13.4 Vdc 92 8.67 - 17.9 Vdc 92 9.2 13 - 27 Vdc 92 6.8 17.4 - 36 Vdc 92 4.6 26 - 54.3 Vdc 92 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 9 DC-DC Web ExpressCode: bricks1 Bricks DC-DC Converter Modules VI-200 and VI-J00 Series VI-200 and VI-J00 converters feature wide input voltage ranges, remote sense, enhanced output programmability, logic disable, and low quiescent current. VI-200 product series feature output overvoltage protection and thermal shut down. VI-J00 product series, at half the size of VI-200 converters, operate to 100C. Both product series are safety agency approved, accelerating your time to market. MIL-COTS Version Available - Page 25 Features Input voltage range: 10 - 400 Vdc Output voltages: 1 - 95 Vdc Output power (per module): VI-200 Series: 50 - 200 W * VI-J00 Series: 25 - 100 W Parallelable for higher power 3,000 Vrms isolation 100C operation: 85C for VI-200 Series Output voltage trim range: 50 - 110% Efficiency: Up to 90% Agency approvals: cULus, cTUVus, CE Marked General Performance Dimensions: VI-200 Series: 4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm) VI-J00 Series: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) Weight: VI-200 Series: 6.0 oz / 170 g VI-J00 Series: 3.0 oz / 85 g Low-noise ZCS / ZVS power architecture 4 environmental grades Refer to data sheet for detailed specifications Parameter C-, I-, M-Grade Input voltage and output voltage Set point accuracy 0.5% 1.0% Load / line regulation (max) 0.2% 0.5% Output temperature drift 0.01%/C 0.02%/C Peak-to-peak output ripple (max) 1.5% 3% Trim range* 50 - 110% 50 - 110% Total remote sense compensation 0.5 V 0.5 V OVP set point (VI-200 Series only) 125% 125% Current limit 105 - 125% 105 - 135% Efficiency (output 5 V) 80 - 90% 78 - 88% Power sharing accuracy (VI-200 Series only) 5% 5% Input reflected ripple current 10% 10% No-load power dissipation 1.35 W 1.35 W Isolation Input to output 3,000 Vrms 3,000 Vrms Input to baseplate 1,500 Vrms 1,500 Vrms Output to baseplate 500 Vrms 500 Vrms 85C ( 100C ) 85C ( 100C ) Max. baseplate temperature: VI-200 Series (VI-J00 Series) * 10 V, 12 V and 15 V outputs, standard trim range 10%. Consult factory for wider trim range. 95 V outputs cannot be trimmed up. 10 E-Grade See Chart A on page 11 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM DC-DC prodselect Web ExpressCode: Bricks Part Number Configuration Chart For VI-200 and VI-J00 DC-DC Converters IMPORTANT NOTICE: PLEASE READ BEFORE STARTING Below is the part numbering format for Vicor VI-200 and VI-J00 DC-DC converters and configurables. The power levels shown are not available for every input and output voltage combination. Refer to Chart A for maximum output power. If you need more power than a VI-J00 offers, use a VI-200. If you need more power than a VI-200 ("driver"), add parallel "booster" modules (of the same power level). V I - Family Click~A~Brick vicorpower.com J 6 1 Series Input Output - C W Grade Power VI Non-RoHS 2 200 0 12 V 4 72 V Z 2V M 10 V K 40 V E -10C U 200 W VE RoHS J J00 1 24 V T 110 V Y 3.3 V 1 12 V 4 48 V C -25C V 150 W B Booster W 24 V 5 150 V 0 5V P 13.8 V H 52 V I W 100 W 2 36 V 6 300 V X 5.2 V 2 15 V 3 48 V 7 150/300 V W 5.5 V N 18.5 V D 85 V Y 50 W V 5.8 V 3 24 V Z T 6.5 V L 28 V R 7.5 V J 36 V N 48 V F 72 V - 40C M -55C X 75 W B 95 V 25 W Chart A For input and output voltages not listed, consult factory. See back cover for all phone numbers. VI-200 Series VI-J00 Series Input Voltage Des. Output Current or Power Available Per Module Nom. (Range) <5 V 5A Z 0 1 12 V (10 - 20 V) 24 V (21 - 32 V) W 24 V wide (18 - 36 V) 2 36 V (21 - 56 V) 3 48 V (42 - 60 V) N 48 V wide (36 - 76 V) 4 72 V (55 - 100 V) T 110 V (66 - 160 V) 5 150 V (100 - 200 V) 6 300 V (200 - 400 V) 7 150/300 V (100 - 375 V) 10 A 5V 15 A 20 A W 30 A V 10 V and Higher 40 A 25 W 50 W 75 W 100 W 150 W 200 W 25 W 50 W 75 W 100 W 150 W 200 W Y X U Z Y X W V U Z Y X W V U Certain output and power combinations are not available for a given input voltage range. Always check with the factory to verify your part number. For assistance with product selection or part numbers, call your local Vicor office, or visit the part number configurators at vicorpower.com. U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 11 DC-DC batmod Web ExpressCode: Bricks Battery Charger BatMod The fully-programmable BatMod current source module is based on the VI-200 Series of DC-DC converters. It accepts 48, 150, or 300 V inputs, provides programmable output current, and is well-suited for such applications as battery chargers, welders, metal platers, and laser diodes. The BatMod is compatible with all major battery types, and is available in booster versions for higher output current applications. Features Input voltages: 48, 150 or 300 V Programmable output current Booster versions for higher output current applications Agency approvals: cULus, cTUVus, CE Marked Dimensions: 4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm) Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. V I - 2 6 1 - Family Module Input Voltage VI = Non-RoHS 2 = Driver Nominal Range VE = RoHS B = Booster 3 = 48 V 42 - 60 V 5 = 150 V 100 - 200 V 6 = 300 V 200 - 400 V E U - Output Voltage Nominal Range 1 = 12 V 11.25 - 16.5 V 3 = 24 V* 22.5 - 33.0 V 4 = 48 V 45.0 - 66.0 V B M Product Grade E = -10 to +85C C = -25 to +85C I = -40 to +85C M = -55 to +85C * Available in 300 V input only. General Performance Refer to data sheet for detailed specifications Parameter Nominal input voltage Output current Remarks 48 Vdc 42 - 60 V 150 Vdc 100 - 200 V 300 Vdc 200 - 400 V 0 - 14.5 A 12 V battery system 0 - 7.25 A 24 V battery system 0 - 3.6 A 48 V battery system Current control input 1-5V Zero to max. current Current monitor output 1-5V Zero to full load Voltage control input 0 - 2.5 V Zero to FS output Output voltage set point 15 V, 30 - , 60 V +/-1% Trimmable +10%, -25% Dynamic characteristics V-Mode: 300 sec typ. I-Mode: 250 sec typ. Operating temp. / storage temp. -10 to +85C, -20 to +100C E-Grade -25 to +85C, - 40 to +100C C-Grade - 40 to +85C, -55 to +100C I-Grade -55 to +85C, -65 to +100C M-Grade Dielectric withstand Input to output 12 3,000 Vrms Output to baseplate 500 Vrms Input to baseplate 1,500 Vrms U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 12 V, 24 V, 48 V Output respectively Vnom for 50 - 100% Load changes DC-DC Bricks Packaging Options Chassis-mount housing for VI-200 and VI-J00 Series modules, see page 32. SlimMod FinMod BusMod Flangeless package Flangeless package with integral heat sink Chassis mount housing with screw / lug wiring interface 2.28"L x 1.80"W x 0.50"H (57,9 x 45,7 x 12,7 mm) Longitudinal, 0.25" fins -- add suffix "- F1" Longitudinal, 0.50" fins -- add suffix "- F2" 2.28"L x 2.40"W x 1.08"H (57,9 x 61,0 x 27,4 mm) 4.60"L x 1.80"W x 0.50"H (116,8 x 45,7 x 12,7 mm) Transverse, 0.25" fins -- add suffix "- F3" Transverse, 0.50" fins -- add suffix "- F4" 4.60"L x 2.40"W x 1.08"H (116,8 x 61,0 x 27,4 mm) To order the SlimMod configuration add the suffix " - S" to the standard module part number as shown on page 11. Available with longitudinal or transverse fins of 0.25" or 0.50" height. Add the appropriate suffix to the module part number as shown on page 11. To order the BusMod fully assembled, add suffix "-B1" to the standard module part number as shown on page 11. To order the BusMod separately: Half-sized BusMod -- P/N 18952 Full-sized BusMod -- P/N 06322 Web ExpressCode Number step 1 - Go to vicorpower.com step 2 - Enter the express code from this product catalog into the Web ExpressCode box, shown on our homepage, to get quick and detailed information about each Vicor product. step 3 - Click "GO" U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 13 DC-DC Web ExpressCode: bricks2 Bricks DC-DC Converter Modules Maxi, Mini and Micro 24, 48, 300 and 375 V These DC-DC converter modules use advanced power processing, control, and packaging technologies to provide the performance, flexibility, and cost effectiveness expected of a mature power component. High-frequency ZCS / ZVS switching, advanced power semiconductor packaging, and thermal management provide high power density with low noise and high efficiency. MIL-COTS Version Available - Page 25 Features 24 V input: 18 - 36 Vdc Overtemperature shut down 48 V input: 36 - 75 Vdc Module fault alarm 300 V input: 180 - 375 Vdc ZCS / ZVS power architecture 375 V input: 250 - 425 Vdc Output voltage trim: 10 - 110% 100C, no derating High efficiency Bias supply to power external circuitry Logic enable / disable Low-noise ZCS / ZVS Up to 120 W/in3 Low parts count 3,000 Vac isolation Low stress levels Single-wire paralleling Low thermal impedance Cost effective 5 environmental grades Input undervoltage lockout Output overvoltage protection General Performance See page 45 Click~A~Brick vicorpower.com/cmds Refer to data sheet for detailed specifications Parameter Notes Set point accuracy 1% Vout nom. Nominal input; full load; 25C Line regulation 0.02% Vout nom. Low line to high line; full load Load regulation 0.02% Vout nom. No load to full load; nominal input Temperature regulation 0.002% Vout/C -20 to 100C (C-Grade) Remote sense compensation 0.5 V Maxi and Mini only Overvoltage set point 115% Vout nom. Current limit 115% Iout max. Vout 95% of nominal Short-circuit current 115% Iout max. Output voltage <250 mV Efficiency Up to 90% Nominal input; 80% load; 25C Programming range 10 - 110% Vout nom. Isolation voltage 3,000 Vrms Input to output Size Maxi full-brick Mini half-brick Micro quarter-brick Agency approvals 4.6" x 2.2" x 0.5" (117 x 55,9 x 12,7 mm) Up to 600 W 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) Up to 300 W 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) Up to 150 W cULus, cTUVus, CE Marked Technical Seminar on CD 14 Module Mounting & Interconnect Options Fully indexed content Video demonstrations for many topics Downloadable application notes, technical articles, data sheets and white papers Designing with Component Power Visit vicorpower.com and claim your Free CD U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM DC-DC Web ExpressCode: prodselect Bricks Part Numbering For Maxi, Mini and Micro Series DC-DC Converters Maxi converter example: V24A48M400BN 24 Vin, Maxi, 48 Vout @ 400 W, long ModuMate pins, slotted baseplate V Mini converter example: V48B28C250BG 48 Vin, Mini, 28 Vout @ 250 W, long RoHS pins, slotted baseplate 48 A 48 C 500 Input Voltage Package A = Maxi B = Mini C = Micro Output Voltage Product Grade E = -10 to +100C C = -20 to +100C T = - 40 to +100C* H = -40 to +100C* M = -55 to +100C Output Power B L Pin Style Blank = Short solder L = Long solder S = Short ModuMate N = Long ModuMate F = Short RoHS G = Long RoHS Consult factory for other input / output / power models. 24 Vin Series Output Power (Watts) Output Voltage 3.3 5.0 12.0 15.0 24.0 28.0 48.0 Vdc Vdc Vdc Vdc Vdc Vdc Vdc Mini Micro 264 400 400 400 400 400 400 150 200 200 200 200 200 200 75 / 50 100 / 50 100 / 50 100 / 50 100 / 50 100 / 50 100 / 50 300 Vin Series Output Power (Watts) Output Voltage 2.0 3.3 5.0 12.0 15.0 24.0 28.0 48.0 375 Vin Series Maxi Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Maxi Mini Micro 160 264 400 500 500 500 500 500 100 150 200 250 250 250 250 250 50 75 / 50 100 / 50 150 / 75 150 / 75 150 / 75 150 / 75 150 / 75 Micro converter example: V375C24C150BG 375 Vin, Micro, 24 Vout @ 150 W, long RoHS pins, slotted baseplate Output Power (Watts) Output Voltage 2.0 3.3 5.0 12.0 15.0 24.0 28.0 48.0 54.0 Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc 48 Vin Series Maxi Mini Micro 160 264 400 600 600 600 600 600 600 100 150 200 300 300 300 300 300 50 75 100 150 150 150 150 150 Output Power (Watts) Output Voltage 2.0 3.3 5.0 12.0 15.0 24.0 28.0 48.0 Baseplate Blank = Slotted 2 = Threaded 3 = Thru hole Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Maxi Mini Micro N/A 264 400 500 500 500 500 500 100 150 200 250 250 250 250 250 50 75 100 / 75 / 50 150 150 150 150 150 * T-Grade storage temp. is -40C; H-Grade storage temp. is -55C Evaluation Boards Evaluation of Maxi, Mini and Micro DC-DC Converters Three styles: Maxi, Mini or Micro Inboard and onboard compatible Description Easy I /O and control connections Includes fusing and capacitors Can be paralleled for higher power arrays Part Number Price Maxi board style 24644 $39.95 Mini board style 24645 $39.95 Micro board style 24646 $39.95 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 15 AC-DC Web ExpressCode: ham Front-ends AC Input Harmonic Attenuator Module HAM The Harmonic Attenuator Module (HAM) accepts an input of 85 - 264 Vdc. The "M" version provides a DC output compatible with Vicor's 26x, J6x and userdefined Maxi, Mini and Micro DC-DC converters. The "L" version is compatible with V375 series DC-DC converters. The combination of a HAM, one or more Vicor DC-DC converters, and the 30205 line filter, listed on page 48, offers a high-density power solution meeting EN61000-3-2. Features Up to 675 W power output 85 - 264 Vac input Meets EN61000-3-2 0.99 Power Factor Part Numbering Short-circuit protection For ordering, call your nearest Vicor office. See back cover for all phone numbers. High efficiency Input-surge limiting Dimensions: 4.6" x 2.4" x 0.5" (117 x 61,0 x 12,7 mm) V Family VI = Non-RoHS VE = RoHS cULus, cTUVus, CE Marked I - H A M Product Types HAM = Driver HAM HAMD = Driver HAM for use with the BAMD BAMD = Booster HAM - C L Product Grade E = -10 to +85C C = -25 to +85C I = - 40 to +85C M = -55 to +85C Output Power M = 600 W L = 675 W* If power requirements exceed one HAM, use a HAMD and one or more BAMDs, with an external bridge rectifier. HAM, HAMD, and BAMD modules require three surge suppressors in series directly across the input. These surge suppressors are already contained in the EMI filter P/N 30205. Also, use a 10 A, 3AG fast-blow fuse ahead of the line filter. * Compatible with V375 Series General Performance Refer to data sheet for detailed specifications Parameter Notes AC line input 85 to 264 Vac No strapping 47 to 63 Hz No damage below low line Output power Up to 675 W Efficiency 92% Power factor 0.99 Total harmonic distortion* <8.5% Output ripple 7 Vp-p Cout = 1000 F, 600 W Inrush current 20 A peak No external circuitry Hold-up capacitance 420 - 3,000 F Power dependent None Provided by DC-DC converters Isolation voltage Input to output Input / output to baseplate 1,500 Vrms Auxiliary output 19 - 23 Vdc @ 2 mA Thermal shut down 90 to 100C baseplate Short-circuit protection Yes Weight 6 oz (170 g) * With sinusoidal input voltage ITHD - VTHD = THD Typical Configuration 85 - 264 Vac 16 Not for design use; see data sheet for more information 30205 Line Filter VI-HAM-CL +Out Pok E/O A/S -Out +In Gate In Gate Out -In U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM V375 VI-26X VI-J6X +Out +S T -S -Out LOAD AC-DC Web ExpressCode: aim Front-ends AC Input Module AIM The AIM (Alternating Input Module) is an AC front-end module which interfaces directly with worldwide AC mains. The AIM provides line rectification, EMI / RFI filtering, transient protection, and inrush limiting in a half-brick package measuring 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm). The AIM is used in conjunction with Vicor VI-200 or VI-J00 DC-DC converters to realize a universal AC input, high density, low-profile switching power supply with outputs from 1 - 95 Vdc and a total power rating up to 200 W. An external capacitor is used to satisfy system hold-up requirements. Internal EMI filtering meets EN55022 and FCC Part 15, Class A emissions limits. MIL-COTS Version Available - Page 25 Features Universal input: 85 to 264 Vac Output power: 250 W Part Numbering Operating temperature up to 100C baseplate (no derating) For ordering, call your nearest Vicor office. See back cover for all phone numbers. Efficiency: 97% Integral EMI filtering Input transient protection Inrush limiting cULus, cTUVus, CE Marked General Performance V I Family VI = Non-RoHS VE = RoHS - A Product I M - E 1 AC Input Module Product Grade E = -10C to +85C C = -25C to +85C I = -40C to +85C M = -55C to +85C Refer to data sheet for detailed specifications Parameter Notes AC line input 85 to 264 Vac No strapping 47 to 440 Hz No damage below low line Output power Up to 250 W Efficiency 97% Power factor 0.62 Inrush current <40 A peak No external circuitry Hold-up capacitance 270 - 1,200 F Power dependent Input to output None Provided by DC-DC converters Input / output to baseplate 1,500 Vrms Isolation voltage Short-circuit protection No Weight 3 oz (85 g) Typical Configuration Not for design use; see data sheet for more information L1 N/C 85 - 264 Vac N/C L2/N +Out Gate In Parallel Gate Out -Out +In Gate In Gate Out -In +Out Vicor DC-DC Converter +S Trim -S Load -Out VI-AIM U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 17 AC-DC Web ExpressCode: ExpressCode: Front-ends Modular AC Front-end System enmods ENMods The ENMod system is an AC front-end solution for compliance to electromagnetic compatibility (EMC) standards. It consists of the MiniHAM passive harmonic attenuation module and the FARM3 autoranging AC-DC front-end module. Combined with filtering and hold-up capacitors, the ENMod system provides full compliance to EN61000-3-2 Harmonic Current, EN55022, Level B Conducted Emissions, EN61000-4-5 Surge Immunity, EN61000-4-11 Line Disturbances, and EN61000-3-3 Inrush Current. Unlike active PFC solutions, the MiniHAM generates no EMI, greatly simplifying and reducing system noise filtering requirements. It is also smaller and more efficient than active alternatives. Optimized for operation on the DC bus (provided by the FARM3) rather than directly on the AC line, it will provide harmonic current compliance at up to 600 W of input power at 230 Vac. The FARM3 is a filter and autoranging module that has been optimized for use as the front end for the MiniHAM. Both modules are in Vicor's standard Mini half-brick package. Features Passive harmonic current attenuation to EN61000-3-2 575 W rated power output Autoranging 115/230 Vac Input Inrush current limiting Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. E N 1 Product Type* C Product Grade (C) E = -10 to +100 C = -20 to +100 T = -40 to +100*** H = -40 to +100*** 1 1 Baseplate Pin Style** 1 = Slotted 1 = Short 2 = Threaded 2 = Long S = Short ModuMate 3 = Thru hole N = Long ModuMate F = Short RoHS G = Long RoHS * EN1 product includes one each MiniHAM and FARM3, same product grade, pin and baseplate style. ** Pin styles S & N are compatible with ModuMate interconnect systems for socketing and surface mounting. *** T-Grade storage temp. is -40C; H-Grade storage temp. is -55C General Performance Refer to data sheet for detailed specifications Parameter Notes Operating input voltage 90 - 132 Vac Autoranging (doubler-mode) 180 - 264 Vac Autoranging (bridge-mode) Output power (max) 575 Watts Harmonic currents EN61000-3-2 Transient surge immunity EN61000-4-5 50 - 600 W, 230 Vac input 2 kV - 50 s line to earth 1 kV - 50 s line to line Conducted emissions EN55022, Class B Safety EN60950 Dimensions MiniHAM 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) FARM3 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) Typical Configuration Not for design use; see data sheet for more information N EMI GND FARM3 SR L 18 + N/+ BOK NC ST EN NC - L/- MINI HAM N/+ +In NC PC (Gate In) NC NC PR (Gate Out) L/- -In U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM + Vicor 300 Vin DC-DC Converter Load - AC-DC Web ExpressCode: ExpressCode: Autoranging Rectifier Module ARM The Autoranging Rectifier Module (ARM) is the front end of a switching power supply and uses a microprocessor to control strapping of the voltage doubler. The user only needs to add an input filter, hold-up capacitor and appropriate DC-DC converters to realize an autoranging, high-density, low-profile switching power supply. Features Efficiency: 96 - 98% Part Numbering Operating temperature up to 100C baseplate (no derating) For ordering, call your nearest Vicor office. See back cover for all phone numbers. Agency approvals: cTUVus, cULus, CE Marked AC Bus OK, module enable Inrush limiting (no external circuitry) Autoranging input: 90 - 132 / 180 - 264 Vac V I Product - A R M - C 1 2 Product Grade Type Pin Style 1 = Short E = -10 to +100C 1 = 500 W / 750 W C = -20 to +100C 2 = 1,000 W / 1,500 W 2 = Long S = Short ModuMate T = -40 to +100C* N = Long ModuMate H = -40 to +100C* F = Short RoHS M = -55 to +100C G = Long RoHS * T-Grade storage temp. is -40C; H-Grade storage temp. is -55C Filter/Autoranging Rectifier Module FARM The FARM (Filter / Autoranging Rectifier Module) is an AC front-end module which provides EMI filtering, autoranging line rectification, transient protection, and inrush current limiting. farm Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. F A Product R Type 1 = 500 W / 750 W 2 = 750 W / 1,000 W M - 1 Product Grade E = -10 to +100C C = -20 to +100C T = - 40 to +100C* H = - 40 to +100C* M = -55 to +100C C 1 1 Baseplate Pin Style 1 = Slotted 1 = Short 2 = Threaded 2 = Long S = Short ModuMate 3 = Thru hole N = Long ModuMate F = Short RoHS G = Long RoHS * T-Grade storage temp. is -40C; H-Grade storage temp. is -55C General Performance for ARM & FARM Parameter Input voltage Input frequency (C-Grade) Input frequency (T-Grade) Output power 115 Vac input 230 Vac input Compatible DC-DC converter Efficiency (typical) Inrush current (peak line. Cold start) Dielectric withstand: Input / output I/O to baseplate Package Inches (mm) Operating temperature (C-Grade) Operating temperature (T-Grade) Weight Refer to data sheet for detailed specifications ARM -( )12 ARM -( )22 90 - 132 Vac 180 - 264 Vac 47 - 63 Hz 47 - 880 Hz 500 Watts 1,000 Watts 750 Watts 1,500 Watts 26x, J6x, V300 97% <30 A @ 264 Vac <60 A @264 Vac Provided by DC-DC converters 1,500 Vrms Micro 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) -20 to +100C - 40 to +100C 2.1 oz (60 g) FARM1( )21 FARM2( )21 90 - 132 Vac 180 - 264 Vac 47 - 63 Hz 47 - 880 Hz 500 Watts 750 Watts 750 Watts 1,000 Watts 26x, J6x, V300 96% <30 A @ 264 Vac <60 A @264 Vac Provided by DC-DC converters 1,500 Vrms Mini 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) -20 to +100C - 40 to +100C 3.1 oz (87.9 g) U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 19 DC-DC QuietPower Web ExpressCode: Qpi TM Active EMI Filters QPI-3L through QPI-12L The QPI family of active EMI filters provides conducted common-mode (CM) and differential-mode (DM) attenuation from 150 kHz to 30 MHz (CISPR22 range). The proprietary active filtering circuit provides superior attenuation at low frequencies intended to support EN Class B limits, including PICMG(R) 3.0 for ATCA. Models QPI-3 through QPI-8 are designed to work with most switch-mode power supplies. The QPI-9 through QPI-12 products are designed specifically for use with Vicor's V*I Chip power conversion products. Full-size QPI models are 25 x 25 x 4,5 mm SiP (System-in-Package), with LGA mounting. QPI-11 and QPI-12 are half size 12,5 x 25 x 4,5 mm SiPs. Patents Pending Features Up to 60 dB CM attenuation at 250 kHz Up to 80 dB DM attenuation at 250 kHz Efficiency: >99% at full load Surface-mount LGA package Integrated hot-swap in selected models Supports PICMG(R) 3.0 ATCA requirements QPI Evaluation Boards Available For more information, go to picorpower.com Part Numbering Part Number (Z = RoHS) QPI-3L ( Z) Input Voltage 24/28 Vdc Nominal Range 10 - 40 Vdc Current Rating 7A CM Attenuation @ 250 kHz 60 dB DM Attenuation @ 250 kHz 80 dB Hipot Hot-Swap 707 Vdc N/A QPI-4L ( Z) 48/60 Vdc 30 - 80 Vdc 7A 40 dB 70 dB 1,500 Vdc N/A QPI-5L ( Z) 24/28 Vdc 10 - 40 Vdc 14 A 60 dB 80 dB 707 Vdc N/A QPI-6L ( Z) 48/60 Vdc 30 - 80 Vdc 14 A 40 dB 80 dB 1,500 Vdc N/A QPI-7L ( Z) 24/28 Vdc 18 - 38 Vdc 6A 50 dB 80 dB 707 Vdc Yes QPI-8L ( Z) 48/60 Vdc 32 - 76 Vdc 6A 40 dB 70 dB 1,500 Vdc Yes V*I Chip Specific Models QPI-9L ( Z) 24/28 Vdc 18 - 38 Vdc 6A @ 1 MHz 65 dB @ 1 MHz 80 dB 707 Vdc Yes QPI-10L ( Z) 48/60 Vdc 32 - 76 Vdc 6A 45 dB 70 dB 1,500 Vdc Yes QPI-11L ( Z) 24/28 Vdc 5 - 50 Vdc 7 A* 65 dB 80 dB 707 Vdc N/A QPI-12L ( Z) 48/60 Vdc 10 - 80 Vdc 7 A* 45 dB 70 dB 1,500 Vdc N/A * Parallelable for up to 14 A. Typical Configuration Not for design use; see data sheet Performance CR EN 55022B 10 , 1/4 W Models QPI-3 through QPI-8 20 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Conducted EMI scans showing QPI performance. Blue trace = no QPI; Red trace = with QPI. DC-DC QuietPower Web ExpressCode: Qpo TM Output Ripple Attenuator QPO-1L / QPO-2L The QPO output ripple attenuator SiP (System-in-Package) products use proprietary active filtering to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 kHz. QPOs improve transient response and ensure quiet point-of-load regulation. They also reduce the number of output capacitors to support dynamic loads. QPOs work with most DC-DC converters and switching power supplies. Output regulation is maintained using remote sensing or the trim input of the power supply. Features Patents Pending >30 dB PARD attenuation, 1 kHz to 500 kHz 25 x 25 x 4,5 mm SiP, LGA mounting Supports precise point-of-load regulation Reduces required number of output capacitors to support dynamic loads User selectable optimization of attenuation, power dissipation, and transient load response Compatible with most DC-DC converters QPO Evaluation Boards Available For more information, go to picorpower.com Part Numbering Part Number (Z = RoHS) Description QPO-1L( Z) QPO-2L( Z) 3 - 30 Vdc input, 10 A, > 30 dB PARD attenuation, 1 kHz to 500 kHz 0.5 - 5.5 Vdc input, 20 A, > 20 dB PARD attenuation, 1 kHz to 500 kHz, Aux. Bus biased Typical Application Performance LOAD+ VOUT+ QPO IN QPO OUT Rsc SENSE+ QPO-1 SC QPO IN (AC) Cout SC SET RSL SC CESR REFGND GND VREF QPO OUT (AC) CSC RHR SENSE- LOAD CURRENT (DC) 5A/DIV VOUTLOAD- Programmable POL Controller PI1004-X Picor's PI1004 combines a VID-controlled reference with control and supervisory functions to accurately set the regulator output voltage at the point of load for isolated and CPU DC-DC converters in desktop and server applications. The PI1004 feature set is intended to be used in conjunction with a variety of power architectures, including Factorized Power Architecture (FPA), to provide CPU power in accordance with Intel(R) VR10.X requirements. The PI1004 is available in two options, PI1004-1: Programmable VID offset current and no OVP output. PI1004-2: OVP output and no VID offset. polc Features 0.5% initial output voltage accuracy Remote differential output voltage sense 6 Bit DAC, with 12.5 mV resolution 5 to 12 V operation Power good output with blanking Programmable adaptive voltage positioning (AVP) 24 pin, 4 x 4 mm QFN U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 21 DC-DC fiam Web ExpressCode: Filters Filter Input Attenuator Module FIAM A DC input, front-end module providing transient protection, inrush current limiting and EMI filtering. The FIAM enables designers using Vicor Maxi, Mini, and Micro 48 Vin DC-DC converters to meet the transient immunity and EMI requirements of Telcordia, FCC, ETSI and European Norms. Features EMI filtering - Class A Inrush current limiting Transient protection 36 - 76 Vdc input 10 and 20 Amp versions Agency approvals: cULus, cTUVus, CE Marked General Performance Defense / MIL-COTS Version - Page 26 Part Numbering Not for design use; see data sheet For ordering, call your nearest Vicor office. See back cover for all phone numbers. Parameter Input voltage F 36 to 76 Vdc I A M - 1 C 1 1 Output current FIAM1xxx / FIAM2xxx Inrush limiting 10 A / 20 A Product 0.014 Amp/F Telcordia GR-1089-Core Issue 2, EM I / RFI Product Grade C = -20 to +100C T = -40 to +100C* H = -40 to +100C* Type 1 = 10 A 2 = 20 A EN55022, Class A, FCC Part 15, Class B Telcordia GR-499-Core, Section 13-2, Transient immunity Pin Style 1 = Short 2 = Long S = Short ModuMate N = Long ModuMate F = Short RoHS G = Long RoHS Baseplate 1 = Slotted 2 = Threaded 3 = Thru hole ETS 300 386-1, Class 2 Mini package size 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) Input Attenuator Module * T-Grade storage temp. is -40C; H-Grade storage temp. is -55C IAM The IAM provides EMI filtering and transient protection for industrial and communications applications, using VI-200 and VI-J00 Series modules. iam Features Meets Telcordia & British Telecom standards for EMI/RFI Meets Telcordia, IEC and British Telecom standards for transients Agency approvals: cULus, cTUVus, CE Marked Efficiency: 97% Input reverse polarity protection Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) IAM Models and General Performance Model 22 Typical Configuration Min. Typ. Max. Power VI-A11-CU 21 Vdc 24 Vdc 32 Vdc 200 W VI-AWW-CU 18 Vdc 24 Vdc 36 Vdc 200 W VI-A33-CQ 42 Vdc 48 Vdc 60 Vdc 400 W VI-ANN-CQ 36 Vdc 48 Vdc 76 Vdc 400 W VI-A66-CQ 200 Vdc 300 Vdc 400 Vdc 400 W RoHS compliant versions begin with "VE-". For example: VE-A33-CQ -IN Output response to an input transient -OUT -IN -S FIAM / IAM Maxi, Mini and Micro Series / VI-200 and J00 Series DC-DC Converters +IN +IN Load +S +OUT Block diagram for either FIAM and IAM modules, see product specific data sheet for connection diagram U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Defense / MIL-COTS Version - Page 26 DC-DC ram Web ExpressCode: Filters Ripple Attenuator Module RAM Combining active and passive filtering, the RAM attenuates both low-frequency input power source fundamental and harmonics, and high-frequency switching components in the frequency range of DC to 20 MHz, while exhibiting efficiencies of 93 - 99%. No adjustments are required, and remote sense and output voltage trim features are retained. Features Reduces output ripple to <3 mV pp (VI-200) Compatible with any VI-200 / VI-J00 based product: 5 to 50 Vdc output Full attenuation up to 20 A No adjustments required Efficiency: 93 - 99% Converter sense, trim, overvoltage, and overcurrent retained Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) CE Marked Input to VI-RAM Low Noise Output Part Numbering Typical Configuration + In Not for design use; see data sheet + In + Out + S In +S Gate In VI-200 Trim Gate Out V + Out + S Out VI-RAM N/C - S In -S - In - Out - In For ordering, call your nearest Vicor office. See back cover for all phone numbers. I - R A M - C 2 Load - S Out - Out Product Family VI = Non-RoHS VE = RoHS Output Ripple Attenuator Module E = C= I = M= Product Grade -10 to +100C - 25 to +100C - 40 to +100C -55 to +100C Type 1 = Up to 10 Amps 2 = Up to 20 Amps MicroRAM Combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz. uram Features Integrated OR'ing diode supports N+1 redundancy >40 dB ripple attenuation from 60 Hz to 1 MHz Significantly improves load transient response Reduces ripple to less than 10 mV peak to peak Efficiency: Up to 98% 20 and 30 Amp ratings 3 - 30 Vdc input range Dimensions: 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) Compatible with Vicor's DC-DC converters MIL-COTS Version Available - Page 26 Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. Typical Configuration Not for design use; see data sheet R A M - 2 C 2 1 RSENSE Product 5.1 +In +Out PC +S 22 F DC-DC Converter PR -In +In SC SC +Out RHR CTRAN* -Out -In LOAD VREF CTRAN -S CHR* -Out Type 2 = 20 Amps 3 = 30 Amps Product Grade ( C ) C = -20 to +100 T = - 40 to +100* H = - 40 to +100* M = -55 to +100 Pin Style Baseplate 1 = Short 1 = Slotted 2 = Long 2 = Threaded S = Short ModuMate 3 = Thru hole N = Long ModuMate F = Short RoHS G = Long RoHS *Optional Component * T-Grade storage temp. is -40C; H-Grade storage temp. is -55C U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 23 MIL-COTS Web ExpressCode: mvichips V*I Chips 28 V DC-DC V*I Chip Modules Pre-Regulator Modules and Voltage Transformation Modules Voltage Transformation Modules (VTMs) put isolated current multiplication and voltage division directly at the point of load (POL), and an upstream Pre-Regulator Module (PRM) controls the factorized bus voltage supplied to the VTM to provide line and load regulation. Together, the PRM and VTM chip set provides the full functionality of a DC-DC converter, but with breakthrough performance and flexibility in a rugged, miniature package. The MIL-COTS PRM operates from a wide input range of 16 - 50 Vdc, meeting many of the ground vehicle and airborne requirements of MIL-STD-1275 and MIL-STD-704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of 36 Vdc, controllable over the range of 26 - 50 Vdc. The downstream isolated VTM is available with twelve voltage division ratios from 1:1 to 1:32 and provides the user with flexibility to supply up to 100 A or 120 W at any output voltage from 1 to 50 Vdc in a surface-mount package occupying only 1 in2. Features for PRM Features for VTM 16 - 50 Vdc input range Isolated 1-50 Vdc output 1.3 MHz switching frequency 1 s transient response Efficiency: 95% 3 MHz switching frequency -55C to 125C operation Efficiency: Up to 96.5% ZVS buck-boost regulator -55 to 125C operation (c) MIL-COTS Product Catalog (c) Designing with Component Power This document provides information on Vicor's line of MIL-COTS standard products, including DC-DC converters, custom solutions, and technical support. Environmental stress screening and MTBF Environmental qualification Custom configured modules Field tested... proven reliability Includes complete information on these and other products. Visit vicorpower.com and enter 'milcat' in the Web ExpressCode box. 24 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM milcat MIL-COTS Web ExpressCode: mbricks2 Bricks / Front end DC-DC Converter Modules Maxi, Mini and Micro Series These high-density DC-DC power converters are available in three rugged packages with output power up to 600 W. Standard inputs of 24, 48, 300, and 375 Vdc; and outputs from 1 to 48 Vdc, make these converters extremely flexible for MIL-COTS applications. Features 24, 48, 300, and 375 Vdc inputs Two operating temperature ratings: - 40 to +100C and -55 to +100C MIL-STD-810 and MIL-STD-202 qualified Environmental stress screening Final test data available at vicorpower.com DC-DC Converter Modules MI-200 and MI-J00 Series Vicor's field-proven MIL-COTS power components have gained a reputation for quality and reliability among military power system designers. With thousands of standard models available, designers can rapidly meet performance, schedule, and budget objectives for just about any power solution. mbricks1 Features 28 and 270 Vdc inputs per MIL-STD-704D/E/F 155 Vdc input per MIL-STD-1399A Output voltages from 2 - 48 Vdc 10 to 100 W output power MIL-STD-810 and MIL STD-202 qualified NAVMAT component derating guidelines Up to 25 W/in3 power density 75 and 100 W booster modules available AC Front-end Module MI-AIM The MI-AIM works in conjunction with Vicor's MI-x7x module family and is ideal for systems requiring AC rectification and transient protection. maim Features 115 Vac nom, 60/400 Hz operation MIL-STD-461D EMI (CE102) @ 60 Hz MIL-STD-704A transient protection MIL-STD-810 and MIL-STD-202 qualified U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 25 MIL-COTS Web ExpressCode: muram Filters Output Ripple Attenuator Module MicroRAM Vicor's MicroRAM output ripple attenuation module combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz. The MicroRAM operates over a range of 3 to 30 Vdc, is available in either 20 or 30 A models, and is compatible with all Vicor DC-DC converters. Features >40 dB ripple attenuation from 60 Hz to 1 MHz 20 and 30 Amp ratings Operation: -55C 3 - 30 Vdc input Filter Input Attenuator Module M-FIAM The M-FIAM is a DC front-end module that provides EMI filtering and transient protection. The M-FIAM enables designers using Vicor 24 and 300 V Maxi, Mini and Micro DC-DC converters to meet conducted emission / conducted susceptibility per MIL-STD-461E; and input transients per MIL-STD-704E/F. mfiam Features MIL-STD-461E conducted emissions / susceptibility MIL-STD-704E/F transient protection MIL-STD-810 and MIL-STD-202 qualified Compatible with 24 and 300 Vdc input Maxi, Mini and Micro DC-DC converters Input Attenuator Module MI-IAM The MI-IAM provides EMI filtering to MIL-STD-461C/D/E and transient protection to the most severe levels of MIL-STD-704A and MIL-STD-1275A/B, using MI-200 or MI-J00 modules. Features 26 28 and 270 Vdc per MIL-STD-704A and MIL-STD-1275A/B MIL-STD-461C/D/E conducted emissions / susceptibility MIL-STD-810 and MIL-STD-202 qualified Compatible with MI-200 and MI-J00 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM miam MIL-COTS Web ExpressCode: mmega Configurables Chassis-Mount DC-DC Converter MI-MegaMod Family DC input power converters delivering up to 300 W from one, two, or three outputs in a package just 0.62" in height. Features Standard inputs of 28, 155, and 270 Vdc Output voltages from 2 - 48 Vdc Up to 13.5 W/in3 1, 2 or 3 outputs, up to 300 W DC Power Supply MI-ComPAC The MI-ComPAC is a complete single, dual, or triple output DC-DC power supply that delivers up to 300 W from inputs of 28 or 270 Vdc. mcompac Features Complete single, dual, or triple output power supply 50 - 300 W MIL-STD-704A and MIL-STD-1275A/B compatible MIL-STD-461C/D/E conducted emissions / susceptibility Conduction-cooled models available Chassis Mount DC-DC Converter VIPAC Arrays VIPAC Arrays are a highly flexible 24 and 300 Vdc input power system that can be configured with up to four user-defined outputs, with power capability, up to 750 W. mvipac Features 24 and 300 Vdc inputs -55C operation Rugged, low profile, coldplate chassis Configurable multi outputs up to 750 W Configure your MIL-COTS VIPAC Arrays online at vicorpower.com/vcad U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 27 DC-DC AC-DC Web ExpressCode: vipac Configurables AC-DC or DC-DC Configurable Power Supply VIPAC Power System Vicor's VIPAC is an integrated power system leveraging the latest advances in DC-DC converter technology and modular front ends. VIPAC combines application-specific power processing units (PPU), a choice of chassis styles and, in AC input versions, remotely located hold-up capacitors to provide fast, flexible, and highly reliable power solutions for a wide range of demanding applications. The PPU is the core element of the system and may be specified for operation from 48 Vdc or 115/230 Vac. The PPU incorporates Vicor's FIAM (for DC input) or autoranging FARM (for AC input) modular front end to provide transient protection, EMI filtering, and inrush current limiting. The web-based VIPAC Design Center enables designers to configure the PPU with up to three independently regulated outputs having power levels from 50 to 500 W and with as much as 900 W total output power. Features AC input: 115/230 Vac autoranging, 47 - 440 Hz Choice of output terminations: LugMate or PlugMate DC input: 48 Vdc Local or remote control Output voltages: 2 - 48 Vdc 50 - 900 Watts total; 1, 2, or 3 outputs Package style: Low-profile coldplate Optional finned heat sink Protective features: Inrush current limiting Input transient protection EMI filtering Agency approvals: cULus, cTUVus, CE Marked Chassis Configurations RoHS-compliant versions can be selected with the VIPAC Design Tool. Configure your VIPAC Power System online at vicorpower.com/vcad Dimensions vary with specific model configurations D A 2 Micros 3.15" x 6.8" (80,0 x 172,7 mm) Single or dual output Up to 300 W 3 Micros 4.96" x 6.8" (126,0 x 172,7 mm) Dual or triple output Up to 450 W E B 2 Minis 4.96" x 6.8" (126,0 x 172,7 mm) Single or dual output Up to 500 W F C 2 Maxis 4.96" x 9.15" (126,0 x 232,4 mm) Single or dual output Up to 900 W 28 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 1 Mini 3.15" x 6.8" (80,0 x 172,7 mm) Single output Up to 250 W 1 Maxi 3.15" x 9.15" (80,0 x 232,4 mm) Single output Up to 500 W G 1 Micro 3.15" x 6.8" (80,0 x 172,7 mm) Single output Up to 150 W DC-DC Web ExpressCode: vipacarray Configurables DC Input Power System * 1 - 4 Outputs VIPAC Arrays VIPAC Arrays are a highly flexible system of DC input, power building blocks that can be configured with as many as four user-definable outputs on a low-profile, coldplate chassis. Using Vicor's VCAD design tool (vicorpower.com/vcad), designers are able to specify VIPAC Arrays with inputs of 24, 48, 300, or 375 Vdc and outputs from 2 to 48 Vdc at power levels up to 600 Watts per output. VIPAC Arrays are ideal for use in distributed and modular power systems where power density and reliable operation are critical. A current share option is available on single output models enabling them to be used in applications requiring high power / redundancy. Fully connectorized input and output terminations speed system installation and a versatile coldplate chassis simplifies thermal management. Features Input voltage: 24, 48, 300 or 375 V Booster versions for higher output current applications Agency approvals: cULus, cTUVus, CE Marked Dimensions: 4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm) RoHS-compliant versions can be selected with the VIPAC Design Tool. Configure your VIPAC Array online at vicorpower.com/vcad Chassis Configurations Dimensions vary with specific model configurations A 2 Minis Single or dual outputs 3.62" x 6.69" (92,0 x 170,0 mm) Up to 600 W total E 1 Micro, 2 Minis Dual or triple outputs Up to 750 W total 3.62" x 7.52" (92,0 x 191,0 mm) B 1 Mini, 2 Micros Single, dual or triple outputs Up to 600 W total 3.62" x 6.69" (92,0 x 170,0 mm) F 4 Micros Dual, triple or quad outputs Up to 600 W total 3.62" x 7.52" (92,0 x 191,0 mm) C 3 Micros Dual or triple outputs Up to 450 W total 3.62" x 6.69" (92,0 x 170,0 mm) G 1 Mini Single output Up to 300 W Current share option 3.62" x 4.39" (92,0 x 112,0 mm) D 1 Maxi Single output Up to 600 W Current share option 3.62" x 6.69" (92,0 x 170,0 mm) H 2 Micros Single or dual outputs Up to 300 W total 3.62" x 4.39" (92,0 x 112,0 mm) U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 29 AC-DC Web ExpressCode: flatpac Configurables 50 - 600 Watt AC-DC Power System FlatPAC Family The FlatPAC is a complete, low-profile, agency-approved switching power supply. It combines Vicor's VI-200 Series of DC-DC converters and front-end subassemblies to provide from 50 to 600 W of output power from one to three outputs. The FlatPAC design provides rapid turnaround on standard models. FlatPAC is available with BatMod current source module, see p.12. Features Microprocessor-controlled front end Inputs: 115/230 Vac, autoranging 22 Standard output voltages from 1 - 95 Vdc FCC Part 15, Class B, EN55022, Class B Low-noise ZCS / ZVS power topology Transient surge: EN61000-4-5 40 ms hold up Conduction-cooled models available Agency approvals: cULus, cTUVus, CE Marked Low profile only 1.37" (34,7 mm) Custom output voltages also available BatMod current-source option available Module disable BUS OK and AC OK Finned or conduction-cooled package General Performance Configure a FlatPAC Part Number see page 33 Refer to data sheet for detailed specifications Parameter Number of outputs 1 to 3 Output power Up to 600 W 90 - 132 Vac / 180 - 264 Vac Input voltage 47 - 63 Hz (400 Hz available; contact factory) Conducted EMI EN/FCC "B" Set point 1% max. (E-Grade 2%) Load / line regulation 0.2% max. (E-Grade 0.5%) Output ripple (pp) 150 mV or 3% max. (E-Grade 5%) Trim range* 50 - 110% Remote sense range 0.5 Vdc max. OVP set point 125% typical Current limit 115% Maximum temperature 0 to 85C baseplate *10, 12 and 15 V outputs, standard trim range 10%. Consult factory for wider trim range. Chassis Configurations Single output Single or dual outputs 50 - 200 Watts 100 - 400 Watts 9.25" x 2.5" x 1.37" (234,8 x 63,5 x 34,8 mm) 9.25" x 4.9" x 1.37" (234,8 x 124,5 x 34,8 mm) OUTPUT 1 30 OUTPUT 1 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 12 OUTPUT 1 Single, dual or triple outputs 150 - 600 Watts 9.25" x 7.3" x 1.37" (234,8 x 185,4 x 34,8 mm) DC-DC Web ExpressCode: compac Configurables 50 - 600 Watt DC Input Power System ComPAC Family ComPAC delivers up to 600 W from one, two, or three outputs in a package just 0.99" (25,2 mm) in height with the field proven performance, high efficiency and high reliability inherent in Vicor's component level power converters. ComPAC meets British telecom and European norms for input surge withstand and meets conducted emissions of EN55022, Class B. ComPAC is offered with input voltage ranges optimized for industrial and telecommunication applications and provides extended input overvoltage capability, input reverse polarity protection, undervoltage lockout, and master disable. ComPAC is available with BatMod current source module, see p.12. MIL-COTS Version Available - Page 27 Features Inputs: 24, 48, and 300 Vdc Any output: 1 to 95 Vdc Agency approvals: cULus, cTUVus, CE Marked Efficiency: 80 - 90% Up to 10 W/in3 EMI / RFI specifications: Telcordia TR-TSY-000513, British Telecom BTR 2511 General Performance Conduction-cooled ComPAC models available EN55022, Class B: Conducted emissions Input surge withstand: British Telecom BTR 2511, EN61000-4-5 Low-noise ZCS / ZVS power topology Conduction-cooled models available Optional high-performance heat sink Refer to data sheet for detailed specifications Parameter Rating Unit 18 - 36 Vdc 21 - 32 Vdc 42 - 60 Vdc 36 - 76 Vdc 200 - 400 Vdc Input voltage range Outputs 1, 2 or 3 Output power 50 - 600 Output voltage(s) Configure a ComPAC Part Number see page 33 Watts 1 - 95 Vdc Operating temperature (case) E-Grade -10 to +85 C C-Grade -25 to +85 C I-Grade - 40 to +85 C M-Grade -55 to +85 C Chassis Configurations 50 - 200 Watts 9.25" x 2.5" x 0.99" (234,8 x 63,5 x 25,2 mm) 12 OUTPUT 1 12 Single output OUTPUT 1 Single or dual outputs 100 - 400 Watts 9.25" x 4.9" x 0.99" (234,8 x 124,5 x 25,2 mm) Single, dual, or triple outputs 150 - 600 Watts 9.25" x 7.3" x 0.99" (234,8 x 185,4 x 25,2 mm) 12 OUTPUT 1 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 31 DC-DC Web ExpressCode: megamod Configurables Chassis-Mount VI-200 / VI-J00 Converters Full and Half-sized MegaMods MegaMod and MegaMod Jr. DC-DC converters incorporate one, two, or three Vicor VI-200 or VI-J00 MiniMod converters in a modular package to provide a chassis-mounted alternative to board-mounted power supplies. MegaMods offer 50 - 600 W of power from 1 - 3 outputs. MegaMod Jrs offer a total of 25 - 300 W from 1 - 3 outputs. Each output may be independently sensed, adjusted, and sequenced using the procedures outlined for VI-200 and VI-J00 converters in the Vicor Applications Manual. Download a PDF of the manual from the library section of vicorpower.com. MIL-COTS Version Available - Page 27 Features Inputs: 10 to 400 Vdc Any output: 1 to 95 Vdc Agency approvals: cULus, cTUVus, CE Marked Efficiency: 80 - 90% (typical) Up to 27 W/in3 Low profile: 0.62" high Low noise ZCS / ZVS power topology Temperature grades (MegaMod Jr.): E = -10 to 85C (100C) C = -25 to 85C (100C) I = -40 to 85C (100C) M = -55 to 85C (100C) ZCS power architecture Booster versions available for expanded output power (MegaMod only) Configure a MegaMod Part Number see page 33 Chassis Configurations Input Selection Package MegaMod 4.9'' (124,4 mm) Output Power MegaMod Jr. 2.58'' (35,5 mm) 12 MODEL S/N INPUT OUTPUT TM MegaMOD MegaMOD Jr. 24 2.5'' (63,5 mm) DC-DC Converter Single output 50 - 200 Watts -- MegaMod 25 - 100 Watts -- MegaMod Jr. Single or dual outputs 100 - 400 Watts -- MegaMod 50 - 200 Watts -- MegaMod Jr. Single, dual or triple outputs 100 - 600 Watts -- MegaMod 75 - 300 Watts -- MegaMod Jr. 36 MODEL S/N INPUT OUTPUT MegaMOD Jr. MegaMODTM DC-DC Converter 48 4.9'' (124,4 mm) 72 110 INPUT MODEL S/N OUTPUT MegaMOD Jr. MegaMODTM DC-DC Converter 150 300 7.3'' (185,4 mm) 150/300 32 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Part Number Configuration Chart For FlatPAC Family, ComPAC Family, and MegaMod Family Output Configurations for FlatPACs, ComPACs and MegaMods Single outputs: Dual outputs: Triple outputs: Family Style L LJ M N P PJ Q R RJ Total Number Internal Modules 1 1 2 3 2 2 3 3 3 Module VI-200 VI-J00 VI-200 VI-200 VI-200 VI-J00 VI-200 VI-200 VI-J00 OUT 1 1 2 3 1 1 2 1 1 Modules Per Output 1 OUT 2 OUT 3 - - - - - - - - 1 - 1 - 1 - 1 1 1 1 The chart to the left shows the number of modules per output for MegaMod product families. Refer to Chart A, on page 11, for a complete listing of available output voltages and to determine the maximum output power available for each internal module, with your specific input / output voltage combination. If your power requirements exceed the limits shown here, call Vicor Express or your local Vicor office for information regarding booster versions. See back cover for all telephone numbers. FlatPAC Family Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. V I Family L = Single M = Single N = Single P = Dual Q = Dual R = Triple - M U Input U = Autoranging 90 - 132 and 180 - 264 Vac Out 1 Z =2V Y = 3.3 V 0 =5V X = 5.2 V W = 5.5 V V = 5.8 V T = 6.5 V R = 7.5 V 3 Out 2* Out 3** M = 10 V K = 40 V 1 = 12 V 4 = 48 V P = 13.8 V H = 52 V 2 = 15 V F = 72 V N = 18.5 V D = 85 V 3 = 24 V B = 95 V L = 28 V J = 36 V All voltages available for output 1, 2, or 3 - C Q Power 1 Grade M = 600 V E = 0C P = 450 V C = 0C I = - 30C Q = 400 V S = 300 V U = 200 V V = 150 V W = 100 V X = 75 V Y = 50 V Power 2* U = 200 W V = 150 W W = 100 W X = 75 W Y = 50 W Power 3** U = 200 W V = 150 W W = 100 W X = 75 W Y = 50 W Power 2* U = 200 W V = 150 W W = 100 W X = 75 W Y = 50 W Power 3** U = 200 W V = 150 W W = 100 W X = 75 W Y = 50 W For conduction-cooled package add - CC to the part number. For example, VI -LU0 -CV -CC. ComPAC Family Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. V I - Family L = Single M = Single N = Single P = Dual Q = Dual R = Triple N 1 W 3 N 6 C Input = 24 V*** = 24 V = 48 V = 48 V = 300 V 3 Out 1 Z =2V Y = 3.3 V 0 =5V X = 5.2 V W = 5.5 V V = 5.8 V T = 6.5 V R = 7.5 V 4 Out 2* Out 3** M = 10 V K = 40 V 1 = 12 V 4 = 48 V P = 13.8 V H = 52 V 2 = 15 V F = 72 V N = 18.5 V D = 85 V 3 = 24 V B = 95 V L = 28 V J = 36 V All voltages available for output 1, 2, or 3 - C M Power 1 Grade E = -10C M = 600 V C = -25C P = 450 V I = - 40C Q = 400 V M= -55C S = 300 V U = 200 V V = 150 V W = 100 V X = 75 V Y = 50 V For conduction-cooled package add - CC to the part number. For example, VI -LWX -CV -CC. MegaMod Part Numbering Some output voltages and power combinations are not available for a given input voltage. Always check with the factory to verify your part number. For ordering, call your nearest Vicor office. See back cover for all phone numbers. V I Family L = Single M = Single N P Q R LJ PJ RJ = = = = = = Single Dual Dual Triple Single Dual = Triple - 0 1 W 2 3 N 4 T 5 6 7 L = = = = = = = = = = = Input 12 V 24 V*** 24 V 36 V 48 V 48 V 72 V 110 V 150 V 300 V 150 / 300 V 1 Out 1 Z =2V Y = 3.3 V 0 =5V X = 5.2 V W = 5.5 V V = 5.8 V T = 6.5 V R = 7.5 V 3 Out 2* Out 3** M = 10 V K = 40 V 1 = 12 V 4 = 48 V P = 13.8 V H = 52 V 2 = 15 V F = 72 V N = 18.5 V D = 85 V 3 = 24 V B = 95 V L = 28 V J = 36 V - E V Grade Power 1 E = -10C M = 600 V C = -25C P = 450 V I = - 40C Q = 400 V M= -55C S = 300 V U = 200 V V = 150 V W = 100 V X = 75 V Y = 50 V Z = 25 V Power 2* U = 200 W V = 150 W W = 100 W X = 75 W Y = 50 W Z = 25 V Power 3** U = 200 W V = 150 W W = 100 W X = 75 W Y = 50 W Z = 25 V All voltages available for output 1, 2, or 3 * For P, Q, R, PJ, and RJ only. Refer to output configuration chart above. ** For R and RJ only. Refer to output configuration chart above. *** Max output power / module 150 W. U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 33 AC-DC Web ExpressCode: pfcfrontend Configurables 375 V Output FrontEnd PFC FrontEnd* The PFC FrontEnd is low-profile, 1 RU enclosed chassis-mount AC front end that may be used with any 375 Vin Vicor module, VIPAC Array, or other module to create a complete, high-density AC-DC power supply. Accepting universal input voltages of 85 to 264 Vac, and 100 to 385 Vdc, the PFC FrontEnd can deliver up to 2,200 Watts from four non-isolated outputs. With an extremely compact package size of 1.72" x 6.4" x 7" (43,6 x 162,6 x 177,8 mm), the PFC FrontEnd can provide >28 W/in3. Besides meeting the cTUVus and CE Marked safety agency approvals, the PFC FrontEnd complies with harmonic current limits per EN61000-3-2, Electrical Fast Transient / burst EN61000-4-5. It also meets MIL-STD-810E for vibration. Features Power Factor Corrected (PFC) Integral cooling fans Low profile 1.72" (43,6) Meets MIL-STD-810E for vibration Output power up to 2,200 Watts DIN rail mountable Power density Up to four 375 Vdc non-isolated outputs Safety agency approvals: cTUVus, CE Marked General Performance Product F E 3 7 5 Refer to data sheet for detailed specifications Size Input Power Output Power Number of Outputs 85 - 264 Vac 2,200 W @ 230 Vac 4 (non-isolated) 1,100 W @ 115 Vac 375 Vdc 1.72" x 6.4" x7" PFC FrontEnd Part Number 47 - 500 Hz (43,6 x 162,6 x 177,8 mm) 100 - 380 Vdc Typical Configuration With VIPAC Array; see data sheet for more information MBJ5 EXTERNAL HUB PIN FUNCTION MBJ5 4 N/C 2 4 3 N/C 1 3 2 375 V COM 1 375 Vdc OPTIONAL EXTERNAL HUB P3 CBJx 1 OF 4 PFC F/E CBJx PIN FUNCTION P1 3 3 N/C 3 2 2 14 Vdc 2 1 1 14 V COM 1 VIPAC ARRAY ADAPTOR P/E MBJx 1 OF 4 MBJx PIN FUNCTION P2 4 4 DISABLE 4 3 3 375 V COM 3 2 N/C 1 375 Vdc 2 1 2 1 * Available Q2, 2006. Consult Factory. 34 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 10 9 8 7 6 5 4 3 2 1 20 9 8 7 6 5 4 3 2 1 J1 J1 PIN FUNCTION 10 20 9 9 1-4 -V IN 8 8 5-7 +V IN 8 NC/PR 7 7 9 PE 6 6 10 -REMOTE 5 5 11-13 -V IN 4 4 14-17 +V IN 18 NC/PR 3 3 19 PE 2 2 20 +REMOTE 1 1 VIPAC ARRAY AC-DC Web ExpressCode: pfcflatpac Configurables AC-DC PFC Single Output Power System PFC FlatPAC The PFC FlatPAC uses Vicor's field-proven VI-HAM and Maxi DC-DC converters to deliver up to 600 Watts of clean, reliable power. The PFC FlatPAC is a single-output power supply available with standard output voltages from 2 - 54 Vdc. It operates from an input of 85 - 264 Vac, includes active power factor correction (0.99 power factor), and meets EN61000-3-2 harmonic current limits. Internal filtering provides compliance to EN55022-A conducted EMI. It is available in Vicor's low profile 1.37" (34,8 mm) FlatPAC chassis, in either finned or conduction-cooled (CC) versions. Features Input: 85 - 264 Vac Power factor: 0.99 Safety agency approvals: cULus, cTUVus, CE Marked Single output: Up to 600 W 2 - 54 Vdc High efficiency Remote sense Low profile package: 1.37" x 4.9" x 9.25" (34,8 x 124,4 x 235 mm) Current limit Thermal shut down OVP General Performance Refer to data sheet for detailed specifications Parameter Rating Unit Notes 85 - 264 Vac 47 - 63 Hz 47 - 440 Hz I-Grade 0.5 % 10 to 100% load 44.8 (1,304) oz (g) 1.37 x 4.9 x 9.25 inches 24,8 x 1,244 x 235 mm Input Voltage Frequency Regulation line / load Mechanical Weight Size Operating temperature (case) C-Grade and E-Grade I-Grade 0 to +85 C -30 to +85 C Storage temperature (case) C-Grade and E-Grade 30 to +100 C I-Grade -55 to +100 C Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. V I - C Input Universal 85 - 264 Vac M 0 1 2 3 L U 3 Output Voltage = 5.0 V 4 = 48 V = 12 V Z = 2.0 V = 15 V Y = 3.3 V = 24 V J = 36 V = 28 V G = 54 V C Product Grade ( C ) E = 0 to 85C case C = 0 to 85C case I = -30 to 85C case M Output Power Vout = <5 V Vout 12 V Q = 80 A M = 600 W Options -CC = Conduction Cooled U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 35 AC-DC lopac Web ExpressCode: Configurables AC-DC Switcher Power Supplies LoPAC Family - PFC Mini, PFC Micro and PFC MicroS The LoPAC Family consists of three power supplies and are available as one-, two-, or three-slot packages. For maximum flexibility, they are configured with standard Vicor DC-DC converters. These modules cover the entire range of outputs from 2 - 95 Vdc (higher through series arrays) and 25 - 600 W, as well as an array of non-standard voltages. Depending on the configuration, the LoPACs can provide up to six user-specifiable isolated outputs. Features Near unity power factor Power density: Up to 11 W/in3 Power factor corrected Autosense feature Output power: Up to 1,500 W Choice of full, half, or quarter brick Agency approvals: cTUVus, CE Marked Up to 6 user-specifiable outputs Fan cooled Configure a LoPAC online at vicorpower.com/vspoc Standard Single-Output AC-DC Switchers PFC Mini* Vout Amps Watts PFC Micro* PM1-03B-48-2 48 31.2 1,500 PM1-03B-28-2 28 53.6 PM1-03B-24-2 24 PM1-03B-12-2 12 PM1-03B-05-2 5 240.0 PFC MicroS* Vout Amps Watts 48 12.5 600 PS1-01-28 28 21.4 600 800 PS1-01-24 24 25.0 600 800 PS1-01-12 12 50.0 600 800 PS1-01-05 5 80.0 400 Vout Amps Watts PC1-02B-48 48 16.7 800 PS1-01-48 1,500 PC1-02B-28 28 28.6 800 62.5 1,500 PC1-02B-24 24 33.3 125.0 1,500 PC1-02B-12 12 66.7 1,200 PC1-02B-05 5 160.0 * Replace -2 with -G for RoHS compliant * Add -G to the end of the part number for RoHS compliant * Add -G to the end of the part number for RoHS compliant Low Profile PFC - 1.72" (43,7 mm) / 1.86" (47,2 mm) Part Numbering For ordering, call your nearest Vicor office. See back cover for all numbers. PM Product Prefix PM = PFC Mini PC = PFC Micro PS = PFC MicroS 36 X1 - Number of Output Voltages X2 X3 -X4 XXXX Number of VI-200 / VI-J00 Series Modules Number of Maxi, Mini or Micro Series Modules Optional Factory Assigned Factory Assigned U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM -X5 Optional Factory Assigned 2 = FasTrak G = RoHS -X6 Optional Codes L L = Low Leakage Q F= Quiet Fan PFC MicroS PFC Mini LoPAC Family Accessories PFC Micro General Performance see page 51 Refer to data sheet for detailed specifications Product Size Input Voltage Number of Slots Number of Outputs Maximum Output Power @ 230 Vac @ 115 V Modules per Slot PFC Mini 12.2" x 6" x 1.72" (309,9 x 152,4 x 43,6 mm) 85 - 264 Vac 100 - 380 Vdc 3 6 1,500 W 800 W 1 Full or 2 Half PFC Micro 10.4" x 5.06" x 1.86" (264,1 x 128,5 x 47,3 mm) 85 - 264 Vac 100 - 300 Vdc 2 6 800 W 500 W 1 Full or 2 Half or 3 Quarter PFC MicroS 7.95" x 5.06" x 1.86" (201,9 x 128,5 x 47,3 mm) 85 - 264 Vac 100 - 300 Vdc 1 3 600 W 500 W Full or 2 Half or 3 Quarter For detailed information, review specific product design guides available online at vicorpower.com New Affordable Power Supply Option The VANTAGE Line Now you can have the Westcor "advantage" of power supplies at a 15% discount (complete power supplies). Westcor's VANTAGE Line of power supplies was developed with all of the user configurability, field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Applicable on all new design-ins starting March 21, 2006 You can configure your complete VANTAGE power supply NOW by visiting VSPOC (Vicor System Product Online Configurator), the flexible, easy-to-use power supply configurator at vicorpower.com/vspoc For more information, call your local Vicor Representative. For your nearest Rep location go to vicorpower.com/contact_us U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 37 AC-DC Web ExpressCode: megapac Configurables User-configurable Power Supply * 1 - 20 Outputs MegaPAC Family The MegaPAC family from Westcor consists of eight fan-cooled, configurable power supplies that enable users to factory configure almost any set of output requirements by combining appropriate slide-in output assemblies called ConverterPACs, with the appropriate chassis. The MegaPAC chassis has a standardized feature-laden front end with slots to accept the ConverterPACs. Models are available with single or three-phase AC inputs. MegaPACs will also operate from high-voltage DC input. Features include EMI/RFI filtering, enable / disable, general shut down, output sequencing. and AC OK. Features 200 to 4,000 Watts Fan cooled User-configurable outputs Efficiency: >80% DC input capability Agency approvals: cTUVus, CE Marked Power factor corrected (some models) Low leakage option available (some model) Up to 20 outputs Current sharing available Low ripple 10 mV p-p or 0.15%, whichever is greater (some models) General Performance Configure your MegaPAC online at vicorpower.com/vspoc Refer to data sheet for detailed specifications Product Size Input Voltage Output Power Mini MegaPAC 9.5" x 6.0" x 3.4" (241,3 x 152,4 x 86,4) 115/230 Vac; Strappable 260-380 Vdc 1,000 W @ 115 Vac or 230 Vac 1 - 10 Outputs ModuPAC(M), JrPAC(J), (5 slots) DualPAC(D), RAMPAC(R), BatPAC(B) 11.9" x 6.0" x 3.4" 115/230 Vac; Autoranging (302,3 x 152,4 x 86,4) 260-380 Vdc 1,200 W @ 115 Vac 1,600 W @ 230 Vac 1 - 16 Outputs ModuPAC(M), JrPAC(J), (8 slots) DualPAC(D), RAMPAC(R), BatPAC(B) PFC MegaPAC 12.3" x 6.0" x 3.4" (312,4 x 152,4 x 86,4) 85 - 264 Vac 100 - 380 Vdc 1,200 W @ 115 Vac 1,600 W @ 230 Vac 1 - 16 Outputs ModuPAC(M), JrPAC(J), (8 slots) DualPAC(D), RAMPAC(R), BatPAC(B) PFC MegaPAC-EL 15.6" x 6.0" x 3.4" (396,2 x 152,4 x 86,4) 85 - 264 Vac 100 - 380 Vdc 1,200 W @ 115 Vac 1,600 W @ 230 Vac 1 - 16 Outputs QPAC(L), JrQPAC(LJ ), (8 slots) DualQPAC(LD) 4 kW MegaPAC-EL 17.0" x 7.5" x 4.9" (431,8 x 190,5 x 124,5) 208 or 240 Vac; 3-Phase 260 - 352 Vdc PFC MegaPAC-HP 12.3" x 6.0" x 3.4" (312,4 x 152,4 x 86,4) 85 - 264 Vac 100 - 380 Vdc 1,200 W @ 115 Vac 2,400 W @ 230 Vac 1 - 13 Outputs BatPAC(B), ModuPAC(M), JrPAC(J), (8 slots) DualPAC(D), RAMPAC(R), FinPAC(PZ) PFC MegaPAC-HPEL 15.6" x 6.0" x 3.4" (396,2 x 152,4 x 86,4) 85 - 264 Vac 100 - 380 Vdc 1,200 W @ 115 Vac 2,400 W @ 230 Vac 1 - 13 Outputs QPAC(L), DualQPAC(LD), (8 slots) JrQPAC(LJ), FinQPAC(PZL) Autoranging MegaPAC 4 kW MegaPAC 14.0" x 7.5" x 4.9" (355,6 x 190,5 x 124,5) MegaPAC Series # of Outputs Slot Configurations 2,000 W - 4,000 W, (3O) 1 - 20 Outputs QPAC(L), DualQPAC(LD), 1,500 W, (1O) (10 slots) JrQPAC(LJ ), QPAC(XU) 208 or 240 Vac; 3-Phase 2,000 W - 4,000 W, (3O) 1 - 20 Outputs ModuPAC(M), JrPAC(J), DualPAC(D), 260 - 352 Vdc 1,500 W, (1O) (10 slots) RAMPAC(R), BatPAC(B), UniPAC(XQ) Low Noise Series High Power Series * FinPACs and FinQPACs require two slots For detailed information, review specific product design guides available online at vicorpower.com Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. MP Product Prefix MP = PFCs, Autoranging or 3-Phase using VI-200 / VI-J00 Series Modules only MX = PFCs, Autoranging or 3-Phase using VI-200 / VI-J00 Series and/or Maxi Series Modules only X1 Number of Output Voltages - X2 Optional Codes 1 = Autoranging / Strappable 4 = 3-Phase 7 = PFC 9 = Autoranging XXXX -X3 Factory Assigned MM = Strappable 38 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Optional Codes 2 = FasTrak G = RoHS -X4 X5 -X6 Optional Codes Optional Codes E L = Extended Length L L = Low Leakage AC-DC Web ExpressCode: cpacs Configurables ConverterPACs Output power up to 600 Watts ConverterPACs incorporate VI-200 or VI-J00 and / or Maxi Vicor DC-DC converter bricks. For additional power, ConverterPACs can be paralleled. Some ConverterPACs are available for low-noise applications (VX I options, RamPACs and QPACs) and as current sources (BatPACs). All ConverterPACs can be easily removed in the field by loosening a single screw and sliding the unit out of the chassis. VI-200 / VI-J00 ConverterPACs Output power up to 200 Watts For general electrical specifications for VI-200 / VI-J00 ConverterPACs, see module specifications on the VI-200 / VI-J00 information sheets in the library section of our website. bricks1 ModuPAC (M) RoHS Compliant (GM) JuniorPAC (J) RoHS Compliant (GJ) RamPAC (R) RoHS Compliant (GR) BatPAC (B) RoHS Compliant (GB) Up to 200 W Up to 100 W Up to 100 W Up to 200 W programmable current source DualPAC (D) RoHS Compliant (GD) QPAC (L) RoHS Compliant (GL) DualQPAC (LD) RoHS Compliant (GLD) JrQPAC (LJ) RoHS Compliant (GLJ) Dual outputs: Up to 100 W / output Up to 200 W Up to 100 W / output Up to 100 W Maxi ConverterPAC Output power up to 600 Watts For general electrical specifications for Maxi ConverterPACs, see module specifications on the data sheets in the library section of our website. bricks2 UniPAC (XU) RoHS Compliant (GXU) FinPAC (PZ) RoHS Compliant (GPZ) QPAC (XQ) RoHS Compliant (GXQ) FinQPAC (PZL) RoHS Compliant (GPL) Up to 500 W Up to 600 W Up to 500 W Up to 600 W U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 39 AC-DC Web ExpressCode: flatpacen Configurables AC-DC Power Supply FlatPAC-EN With a power density greater than 7 W/in3, the FlatPAC-EN is capable of providing up to 500 W (425 W for EN compliance) from up to four isolated outputs. The FlatPAC-EN can be configured with standard Vicor DC-DC converter modules. Like all other configurable power supplies offered by Vicor, the optimum FlatPAC-EN solution can be factory configured based on the exact voltage and power requirements of the customer. Features EN61000-3-2 harmonic current compliance Agency approvals: cTUVus, CE Marked Output power to 500 W (425 W for EN compliance) Choice of full-, half- and quarter-brick modules with outputs from 2 to 95 Vdc and 25 to 500 Watts, as well as an array of non-standard output voltages Special extended temperature range (-E) and low leakage (-LL) versions available Conduction or convection cooled (same model) Power density: >7 W/in3 Ultra low profile: 1.4" (35,6 mm) height RS-232 microcontroller interface Rugged: Meets MIL-STD-810E, category 10 for vibration General Performance Product FlatPAC-EN FlatPAC-EN Accessories see page 51 Refer to data sheet for detailed specifications Size Input Power Output Power Number of Outputs 9.2" x 5.0" x 1.4" (233,7 x 127 x 35,6 mm) 85 - 132 / 180 - 264 Vac 250 - 380 Vdc 500 W (425 W for EN compliance) 1-4 Part Numbering For ordering, call your nearest Vicor office. See back cover for all phone numbers. FL X1 - Product Prefix FL = FlatPAC-EN Number of Output Voltages X2 X3 -XXXX Number of Number of VI-200 / VI-J00 Maxi, Mini or Micro Series Modules Series Modules -X4 -X5 Configure a FlatPAC-EN online at Factory Optional Factory Optional Codes Assigned Assigned L L = Low Leakage 2 = FasTrak G = RoHS vicorpower.com/vspoc Layout Configurations MBJ1 Input Conn. MBJ1 Input Conn. CBJ1 Interface Conn. Single or Dual Outputs Assumes either a full brick and / or half brick is used. M2 MiniHAM M1 VI-J00 or Mini VI-200, Maxi or Batmod Stud Connectors For a single output configuration, either M1 or M2 is used. CBJ1 Interface Conn. M3 MiniHAM VI-J00 or Mini M1 M2 VI-J00 or Mini VI-J00 or Mini MBJ1 Input Conn. Triple Outputs Assumes only half bricks are used. Two 18-pin Molex Connectors. CBJ1 Interface Conn. M4 VI-J00 or Mini MiniHAM M1 M2 M3 Micro Micro Micro Quadruple Outputs Assumes only half and / or quarter bricks are used. Two 18-pin Molex Connectors. Note: The type of output connector a FlatPAC-EN has depends on which modules are used. For example, if a two output configuration uses two half bricks (instead of a full brick and half brick) this two output configuration will have the 18 pin Molex connectors, not stud connectors. 40 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM DC-DC Web ExpressCode: dcmegapac Configurables DC-DC Power Supply DC MegaPACTM The DC MegaPAC DC-DC switcher allows users to instantly configure highly-efficient power supplies. A complete power supply is configured by selecting and inserting up to eight slide-in output assemblies called "ConverterPACs." ConverterPACs incorporate one or two Vicor DC-DC converters and are available in a wide array of outputs and power levels. If output requirements change, the user can simply unlock a single screw and replace the slide-in ModuPAC assembly with one that has the desired rating. Features DC inputs of 12 to 72 V available Conducted EMI meets BTR 2511 Output power: Up to 16 outputs and 1,600 W total power (depending upon input voltage) Remote sense capability and output overcurrent protection on all outputs Output overvoltage protection on most outputs Temperature rating: Full power to 45C; half power to 65C Output overtemperature protection on all outputs Input over, under and reverse voltage protection Box-to-box paralleling capability 9.25 lbs. fully configured Input temperature monitor, warning and shut down Fan cooled CE Marked Soft start for limiting inrush current Size: 3.4"H x 6.0"W x 12.0"L (86,3 x 152,4 x 304,8 mm) AC and DC Redundant Input Power Supply RackguardTM The AC input is 115 / 230 Vac autoranging, 50 - 60 Hz. There are two DC input options: 48 V (38 - 72 V) or 150 V (105 - 200 V). Consisting of two configurable and independent outputs of 400 W and 200 W, the supply delivers a full-load output power of 600 W. rackguard Features AC input: 115/230 Vac, autoranging Total power: 600 W DC input: 48 V (38 - 72 V) or 150 V (105 - 200 V) Convection cooling Output: 24 to 48 V Dimensions: 17" L x 9.57" W x 4.87" H (431,8 x 243,07 x 123,6 mm) U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 41 AC-DC badger Web ExpressCode: Configurables MIL-COTS PFC Power Supply BadgerTM The Badger is a rugged PFC multi-output power supply, capable of withstanding extreme environments and stresses often inherent with military applications. General Specifications Product Badger Typical unless otherwise noted Size 2.55" x 7.0" x 13.75" (64,8 x 177,8 x 349,3 mm) Input Voltage Max # of Outputs Maximum Power Cooling 85 - 264 Vac 12 1,500 W Internal fans MIL-COTS Power Supply Notes OCP, OVP, and OTP on all outputs JavelinTM The Javelin is an AC input power supply with a single DC output, capable of up to 5,400 W, in a rugged package suitable for industrial and military applications. General Specifications Product javelin Refer to data sheet for detailed specifications Size Input Voltage Max # of Outputs Maximum Power Cooling Javelin I 4.9" x 7.0" x 10.75" (124,5 x 177,8 x 273,05 mm) 85 - 254 Vac 1 600 - 1,800 W Internal fans Javelin II 4.9" x 7.0" x 9.5" (124,5 x 177,8 x 241,3 mm) 85 - 254 Vac 1 600 - 1,800 W No fan Javelin III 7.0" x 16.0" x 13.0" (177,8 x 406,4 x 330,2 mm) 85 - 254 Vac 3-Phase 1 1,800 - 5,400 W AC-DC Low Profile Power Supply Internal fans PowerBankTM The PowerBank is a low-profile AC-DC switching power supply that offers up to six configurable outputs at up to 1,500 Watts. General Specifications Product 42 powerbank Refer to data sheet for detailed specifications Size Input Voltage Max # of Outputs Maximum Power Cooling Notes PB1004PFC 1.74" x 8.08" x 10.28" (44,2 x 205,2 x 261,1 mm) 85 - 264 Vac 4 1,000 W Internal fans Low power stand-by output PB1005AC 1.68" x 7" x 10.5" (42,7 x 177,8 x 266,7 mm) 115/230 Vac 300 Vdc 5 1,000 W Internal fans SEMI F47 compatible PB1506PFC 1.75" x 12.6" x 16.84" (44,5 x 320,04 x 427,7 mm) 90 - 264 Vac 6 1,500 W Internal fans Two aux. low power outputs PBC1002AC 2.5" x 7.38" x 9" (63,5 x 187,5 x 228,6 mm) 115/230 Vac 2 1,000 W Cond., conv., liquid Customizable baseplate / heat sink PBC1002PFC 2" x 6.5" x 13.5" (50,8 x 165,1 x 342,9 mm) 90 - 264 Vac 2 1,000 W Cond., conv., liquid Customizable baseplate / heat sink U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM CUSTOM Web ExpressCode: custom Technical Support Custom Power Solutions Designed To Fit Your Specific Needs Vicor VIAs: Small company responsiveness, large company resources Each of the six Vicor Integration Architects (VIAs), located throughout the United States, designs and manufactures turnkey custom power systems. VIAs maintain the flexibility of a small entrepreneurial company while taking advantage of the technical and business resources of Vicor to deal effectively with the most challenging power problems. Their total focus is on the power solution that best satisfies the needs of each customer. VIAs provide custom power solutions for: COMMUNICATIONS INDUSTRIAL DATACOM TEST EQUIPMENT MEDICAL DIAGNOSTICS MIL-COTS TRANSPORTATION Vicor Integration Architects Aegis Power Systems North Carolina ConverTec Corporation Minnesota Freedom Power Systems Texas Granite Power Technologies New Hampshire Mission Power Solutions California Northwest Power Integrations Oregon = Vicor Integration Architects (VIAs) U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 43 CUSTOM Web ExpressCode: custom Technical Support Every Vicor Integration Architect has developed high-level technical expertise and design and manufacturing skills in these key areas: VIAs have: Built custom applications for satellite transceivers, PBX, digital phones, and microwave radio and are up-to-date on the changing requirements of the communications industry for powerful and quick-to-build power systems. Developed customized power supplies for use in harsh environments and industrial conditions. Applications have included avionics, telemetry systems, and control systems. Developed a variety of custom supplies for EDP. Applications have included full computer systems, portable workstations, and redundant disk arrays. Developed ruggedized power systems and supplies specifically for test equipment. Applications have included portable and automated test fixtures. Designed and built custom power supplies for a wide range of medical applications, including scanners, x-ray systems, and other medical equipment and tools. Extensive experience with military COTS and aerospace applications and can provide module-based custom solutions quickly and cost effectively. Based on Vicor high-density, low-noise DC-DC converter modules every VIA design exists to solve your unique requirements in the shortest possible time. Need fault tolerance? Hot swap? High power? Have size and weight constraints? Demanding thermal or noise requirements? NOT A PROBLEM. In addition to manufacturing your custom solution, VIAs arrange for agency approvals. By basing their designs on Vicor component power modules, VIAs can provide prototypes and production quantities of your power supply in far less time and with far less risk than conventional discrete approaches. Vicor's VARs - Custom Turnkey Power Solutions Worldwide Throughout Europe and Asia Pacific, Vicor and its distributors operate in partnership with Vicor's Value-Added Resellers (VARs). These companies have the same experience, manufacturing capabilities, and quality focus as Vicor's VIAs in creating custom turnkey power systems. Typical applications include: Industrial controllers Mobile tracking radar Test equipment Shipboard communications and networking Super computers Railroad telemetry RAID storage Transportation control Satellite transceivers In-flight entertainment Network encryption Field-portable gas chromatograph / mass spectrometer Avionics Battery charger Missile guidance and control For information on component-based custom systems designed and manufactured to meet your specific requirements, go to vicorpower.com 44 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM ACCESSORIES Web ExpressCode: ModuMate Sockets sockets For Maxi, Mini and Micro Series SurfMate: Surface mount sockets* Full brick (Maxi) Board Thickness Mounting Style All Surface mount Input Output 5 Sets Half brick (Mini) Input Output Quarter brick (Micro) 5 Sets Input Output 5 Sets P/N 22100 P/N 22101 P/N 16017 P/N 22100 P/N 22102 P/N 16021 P/N 22103 P/N 22104 P/N 16025 $5.18 $6.82 $65.00 1. $5.18 $6.82 $65.00 2. $4.90 $4.10 $50.00 Use module pin style** S, F 3. InMate: Thru hole sockets* All sockets are supplied on InMate headers to assure proper alignment during installation. Full brick (Maxi) Board Thickness Mounting Style Nominal 0.063" Inboard Min / Max 0.055" / 0.071" Onboard Nominal 0.094" Inboard Min / Max 0.084" / 0.104" Onboard Nominal 0.125" Min / Max 0.1125" / 0.1375" Onboard Input Output P/N 18374 P/N 18382 $3.56 $5.35 $5.35 $3.56 $5.35 $3.56 $5.35 $3.56 1. $5.35 Input Output 5 Sets $3.56 $5.35 $50.00 $3.89 $3.01 Use module pin style** $3.56 $5.35 $50.00 $3.89 $3.01 S, F $38.75 $38.75 $3.56 $5.35 $50.00 $3.89 $3.01 N, G $3.56 $5.35 $50.00 $3.89 $3.01 $38.75 P/N 21510 P/N 21539 P/N 21544 P/N 21511 P/N 21540 P/N 21545 P/N 21512 $50.00 2. $3.56 $5.35 $50.00 $3.89 3. $3.01 S, F $38.75 P/N 18365 P/N 18379 P/N 18391 P/N 18369 P/N 18381 P/N 18393 P/N 18373 $50.00 P/N 21539 P/N 21543 5 Sets P/N 18363 P/N 18375 P/N 18385 P/N 18367 P/N 18377 P/N 18387 P/N 18371 $50.00 P/N 18379 P/N 18389 Output P/N 18364 P/N 18378 P/N 18390 P/N 18368 P/N 18380 P/N 18392 P/N 18372 $50.00 P/N 18375 P/N 18383 Input Quarter brick (Micro) P/N 18362 P/N 18374 P/N 18384 P/N 18366 P/N 18376 P/N 18386 P/N 18370 $50.00 P/N 18378 P/N 18388 $3.56 5 Sets Half brick (Mini) $38.75 N, G N, G 4. * For individual input / output purchases, a 35-piece minimum (and multiples) applies to Maxis / Minis and a 40-piece minimum for Micros. ** See p. 15 for pin styles. Module Exchange Tool Used in facilitating the proper extraction of modules from InMate or SurfMate sockets. Removal without using the Exchange Tool may cause damage to the sockets. Description Maxi Exchange Tool Mini Exchange Tool Micro Exchange Tool Part Number 22827 22828 22829 Price (1 - 9) $150.00 $150.00 $150.00 22829 22827 22828 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 45 ACCESSORIES comp Web ExpressCode: Components All parts are RoHS compliant unless otherwise noted. Diodes and Rectifiers Oscilloscope Test Jacks (for 0.095" diameter probe) Fwd. Peak Rev. Characteristics Voltage Case Part Number Price Diode: Used for isolating signals (i.e., Gate In / Gate Out). 1 Amp 800 V DO-41 00670 $1.07 1 V @ 10 mA 100 V DO-35 30647 $0.10 Recommended for common-mode noise measurements. Schottkg Barrier Rectifier: 1 Amp 20 V MOVs 26108 $0.50 OR'ing Diodes: Used for fault-tolerant applications. 0.4 V @ 30 A @ 100C 35 V TO-220-Dual 02838 0.38 V @ 80 A @ 100C 15 V D-61-8 10122 $3.74 $19.26 Bridge Rectifiers: Used to rectify AC line. 8 Amps 600 V 35 Amps 600 V $3.10 $10.43 03261 30660 Zener Diode(1.5KE51A): Use with ENMod system. 51 V 41A-04 30262-051 Optocouplers: For logic disable. Toshiba TLP595G (or TLP795G) 6N139 HCPL-0701 Darlington 13468* 26106 26109 $10.70 $2.00 $3.00 Price $5.88 $5.35 For use with Front-end Modules. Description 275 V MOV, 14 mm Disc 68 V MOV, 10 mm Disc 120 V MOV, 10 mm Disc 200 V MOV, 10 mm Disc 220 V MOV, 10 mm Disc Part Number 30076 30234-068 30234-120 30234-200 30234-220 Price $1.00 $1.00 $1.00 $1.00 $1.00 13755 For use with the ENMods and VI-ARM. Part Number 13755 30515 Spark Over (DC) 220 V 75 V Price $2.67 $2.67 Phased Array Controller (PAC) chip For use with arrays of up to 12 converters, the PAC chip provides phased operation to minimize overall noise. 02838 Part Number 30488 26106 00670, 30647 03261 Part Number 01830 06207 Gas Discharge Tube $1.00 30660 13468* Description Shielded, horizontal Shielded, vertical 10 Piece price $12.28 Order in 10 piece lots Fuses and Fuse Holders Standard design practices as well as safety agency conditions of acceptability often require appropriate fusing at the input of power conversion components. Rating Fuse Part Number 2 Amps / 450 Vdc 2.5 Amps / 450 Vdc 3 Amps / 250 Vdc 5 Amps / 125 Vdc 7 Amps / 125 Vdc 10 Amps / 125 Vdc 12 Amps / 250 Vdc 20 Amps / 250 Vdc 30 Amps /125 Vdc 6.3 Amps / 400 Vdc 03360* 08395* 30243 30276 30236 30247 05147 22409* 23196* 22985 03360*, 30243, 30276, 08395* Price $1.44 $1.44 $1.44 $1.60 $1.12 $1.12 $0.90 $1.50 $2.75 $5.00 Fuse Holder Part Number Description (to be used with fuse holder) PC-Tron(R) $0.64 Vertical mount with stability pins, 0.25" x 1.25" 03144 03144 03144 03144 -- -- 09981 Horizontal mount, 0.25" x 1.25" 10660* $4.81 PC-Tron(R) Socket-Type Price (minimum order 100 pcs.) $4.81 is a registered trademark of Bussman. 10660* 05147 09981 30236, 30247 03144 * Not RoHS compliant Minimum order quantities may apply. 46 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM ACCESSORIES caps Web ExpressCode: Capacitors All parts are RoHS compliant unless otherwise noted. Capacitors, Surface Mount Polymer Capacitors, Hold-up Low ESR, Polymer 0.287" x 0.169" pkg. Rating 330 F, 6.3 V 470 F, 6.3 V 1,000 F, 2.5 V 680 F, 2.5 V 470 F, 4 V 680 F, 4 V 220 F, 10 V Part Number 23484-337 23484-477 23577-108 23577-687 23578-477 23578-687 23579-227 Price $3.00 $3.00 $3.00 $3.00 $3.00 $3.00 $3.00 Product VI-AIM Description 270 F, 200 V 270 F, 400 V Part Number 30769 30240 Price $4.81 $10.00 VI-HAM 470 F, 450 V 30249 $13.37 1,200 F, 200 V 2,200 F, 200 V 30275 30483 $6.50 $11.77 FARM / ARM Capacitors, Tantalum Solid tantalum capacitor used to reduce output ripple. Capacitors, Ceramic Product VI-AIM Description 470 pF, 500 V 0.01 F, 500 V Part Number 30458 28054 Price $0.80 $0.80 Description Part Number Price 270 F, 10 V 120 F, 20 V 68 F, 30 V 27 F, 50 V 24252* 30506 30507 30259 $6.25 $6.25 $6.25 $6.25 Capacitor, Multilayer Polymer Rating 0.81 F, 250 V Part Number 06852 Price $0.96 Capacitors, Y-type For EMI / RFI considerations, Y capacitors should be used with any of Vicor's DC-DC converter modules. Capacitors, X-type To meet the filtering specifications of FCC Level A, add a 0.47 F "X-type" capacitor to the input of the VI-AIM. Description "X" Cap., 0.68 F "X" Cap., 0.47 F "X" Cap., 0.33 F "X" Cap., 0.22 F "X" Cap., 0.15 F "X" Cap., 1.0 F Part Number 11217 03047 00927 04068 03269 02573 Price $3.74 $2.94 $2.14 $3.21 $1.33 $2.67 Description "Y" Cap., 1,500 pF "Y" Cap., 4,700 pF "Y" Cap., 0.01 F "Y" Cap., 0.022 F "Y" Cap., 4,700 pF "Y" Cap., 1,500 pF SMT version SMT version Part Number 00770 01000 01501 03093 25283 30802 Price $1.71 $1.33 $1.01 $1.39 $2.25 $2.25 Part Number 13439* 13441* 13443* 30468 13447* 30788 30469 Price $0.96 $0.96 $0.96 $0.96 $0.96 $0.96 $0.96 Capacitors, Aluminum Electrolytic Radial lead, 16 mm x 15 mm Description 2,200 F, 6.3 V 1,500 F, 10 V 1,200 F, 16 V 820 F, 25 V 560 F, 35 V 200 F, 63 V 120 F, 100 V Part Number 13438* 13440* 13442* 13444* 13446* 30787 30789 Price $2.14 $2.14 $2.14 $2.14 $2.14 $2.14 $2.14 Radial lead, 12 mm x 25 mm Description 10 F, 450 V Part Number 13469* Price $1.60 Radial lead, 10 mm x 16 mm Description 680 F, 6.3 V 560 F, 10 V 390 F, 16 V 270 F, 25 V 180 F, 35 V 68 F, 63 V 33 F, 100 V * Not RoHS compliant Minimum order quantities may apply. VIEW MECHANICAL DRAWINGS ON-LINE! v i c o r p o w e r. c o m U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 47 ACCESSORIES chokes Web ExpressCode: Magnetics All parts are RoHS compliant unless otherwise noted. Basket Chokes Inductors, Common Mode 0.80" x 0.39" x 0.33" (20,3 x 9,8 x 8,45 mm) Common-mode inductors provide a high level of attenuation of common-mode currents. Low profile, surface mount power inductors. Other values available, consult factory. Inductance1 (open circuit) Rated Current DCR (max.) Part Number Price 243.09 H 3.9 A 156.35m 31499-02 $3.50 115.17 H 5.6 A 77.50 m 31499-03 $3.50 47.40 H 8.8 A 29.38 m 31499-05 $3.50 Inductance / Winding 1000 H DC Current / Resistance 12 A / 6.5 m Part Number 31743 Price $14.23 3000 H 7 A / 18 m 31742 $14.23 2163 H 1 A / 42 m (low profile) 31943 $4.65 1.3 mH 13 A / 14 m 32006 $12.50 13.28 H 16.6 A 7.56 m 31499-08 $3.50 5.90 H 25.0 A 3.23 m 31499-10 $3.50 2.62 H 37.5 A 1.31 m 31499-12 $3.50 Inductor, Differential Mode, Input 1.48 H 50.0 A 0.82 m 31499-13 $3.50 1.03 H 60.0 A 0.58 m 31499-14 $3.50 Inductance / Winding DC Current / Resistance Part Number Price 12 A / 5.8 m 29764 $3.21 4 A / 250 m 36-00036* $10.70 0.66 H 75.0 A 0.37 m 31499-15 $3.50 22 H 0.37 H 100.0 A 0.22 m 31499-16 $3.50 1 mH 1Inductance values roll off to approximately 35% at full rated current. Full data sheet available at vicorpower.com Inductor, Output Sense Compensation Inductance 1 mH Basket Choke Design Kit Part Number 36-00030* Price $1.50 Includes 6 pieces of the 10 part numbers listed above. Part Number 28806* Price $180.00 Inductors, Differential Mode Output inductors may be used to reduce differential output noise by approximately 20 dB. PR Bus Isolation Transformer Developed for isolation of PR Bus signal when used with 2nd Generation parallel configurations. Consult Vicor for applications instructions. Part Number 29768 Price $7.50 Inductance 0.2 H DC Current (max.) 40 A Part Number 30268 Price $3.21 27 H 12 A 32012 $3.21 1.8 H 10 A 32562 $3.21 Common Mode Output Inductors Inductance VI-HAM Line Filter The VI-HAM requires an external line filter. When used in conjunction with part number 07818, the VI-HAM / Filter combination will meet the requirements of worldwide EMI standards. Part Number 30205* DC Current (max.) Part Number Price 420 H 20 A 36-00037* $10.70 350 H 40 A 36-00029-01* $10.70 1.27 mH 10 A 36-00029-04* $10.70 70 H 80 A 36-00029-06* $22.50 110 H 60 A 36-00029-07* $15.00 Price $29.96 * Not RoHS compliant Minimum order quantities may apply. 48 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM ACCESSORIES Web ExpressCode: mounting1 Mounting & Thermal Management All parts are RoHS compliant unless otherwise noted. Transverse Fins Longitudinal Fins Transverse Fins Longitudinal Fins Transverse Fins 0.90" Fin P/N 30089 0.90" Fin P/N 30090 0.70" Fin P/N 30775 0.70" Fin P/N 30193 1.45" Fin P/N 30780 0.40" Fin P/N 30194 $8.02 $8.02 $8.02 $8.02 $10.70 $8.02 VI-200 Longitudinal Fins VI-J00 Longitudinal Fins Transverse Fins Transverse Fins 0.90" Fin P/N 30191 0.90" Fin P/N 30771 0.40" Fin P/N 30140 $5.35 $5.35 $5.35 V*I Chip Heat Sinks and Push-Pins For use with PRM, VTM and BCM V*I Chip Power Components. Heat Sink Part Number Price Push-Pins (includes thermal interface) Part Number (incudes spring) Transverse Fins, 11 mm Transverse Fins, 6.3 mm Longitudinal Fins, 11 mm Longitudinal Fins, 6.3 mm 32438 32439 32440 32441 $3.00 $3.00 $3.00 $3.00 0.051" 0.070" 0.105" 0.133" - - - - 0.069" 0.104" 0.132" 0.156" Price (100 pieces) ) PCB PCB PCB PCB 32434 32435 32436 32437 $12.00 $12.00 $12.00 $12.00 Grounding Clips For use with FinMod and SlimMod packaging options (see page 13). Grounding clips provide a convenient means for making electrical connection between the heat sink assembly and the printed circuit board. Use With... F1 and F2 F3 and F4 SlimMods Part Number 32185 32186 09674* Sockets Sockets are available for all Vicor VI-200 and VI-J00 modules and are intended for applications requiring ease of module installation or removal. Vicor modules have nine pins, seven of which are 0.040" and two are 0.080". Pin Size 0.040" 0.080" Finish Electro-tin Electro-tin Price $0.42 $0.42 $0.64 32186 09674* 32185 Module Standoffs 30075 30074 For mechanical mounting of VI-200 and VI-J00 Series modules. Also provides grounding of the module from the baseplate to the printed circuit board. (Sold individually) Description 0.525" Long, 0.25" Hex Part Number 30074 30075 Part Number 10692-01 Price $1.07 Price $0.42 $0.85 ThermMate Thermal Pads For use with Vicor modules, ThermMate thermal pads are a "dry" alternative to thermal compound and are pre-cut to the outline dimensions of the module. Thermal Pad Part Number VI-200 (10 pc. pkg.) 20266 VI-J00 (10 pc. pkg.) 20267 Thickness 0.007" 0.007" Price $37.50 $30.00 Minimum order quantities may apply. 20266 20267 * Not RoHS compliant U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 49 ACCESSORIES Web ExpressCode: mounting2 Thermal Management For Maxi, Mini and Micro products All parts are RoHS compliant unless otherwise noted. Transverse Fins Longitudinal Fins Maxi Heat Sinks Mini Heat Sinks Micro Heat Sinks Threaded Thru Hole Threaded Thru Hole Threaded Thru Hole 0.4" Fin P/N 30482 $8.82 0.4" Fin P/N 30718 $11.25 0.4" Fin P/N 32188 $7.75 0.4" Fin P/N 30195 $9.89 0.4" Fin P/N 32174 $6.36 0.4" Fin P/N 30719 $8.29 0.9" Fin P/N 30188 $8.82 0.9" Fin P/N 30181 $11.25 0.9" Fin P/N 30189 $7.75 0.9" Fin P/N 30182 $9.89 0.9" Fin P/N 30190 $6.36 0.9" Fin P/N 30183 $8.29 0.4" Fin P/N 30778 $8.82 0.4" Fin P/N 30720 $11.25 0.4" Fin P/N 30184 $7.75 0.4" Fin P/N 30721 $9.89 0.4" Fin P/N 32173 $6.36 0.4" Fin P/N 30722 $8.29 0.9" Fin P/N 30196 $8.82 0.9" Fin P/N 30723 $11.25 0.9" Fin P/N 30269 $7.75 0.9" Fin P/N 30724 $9.89 0.9" Fin P/N 30270 $6.36 0.9" Fin P/N 30725 $8.29 Low-profile side-fin heat sinks - HEIGHT ONLY 0.125" ABOVE MODULE BASEPLATE ! ! ! Standoffs and screws standoffs Bulk and single-module kits compatible with all standard mounting configurations. 0.55" Side Fins P/N 30096 $11.25 0.55" Side Fins P/N 32190 $9.89 0.55" Side Fins P/N 30095 $8.29 Not compatible with standoff kits. ThermMate Thermal Pads For use with Vicor modules, ThermMate thermal pads are a "dry" alternative to thermal compound and are pre-cut to the outline dimensions of the module. Thermal pad Maxi (10 pc. pkg.) Mini (10 pc. pkg.) Micro (10 pc. pkg.) Part Number 20263 20264 20265 Thickness 0.007" 0.007" 0.007" 20263 Price $37.50 $30.00 $26.75 20265 Minimum order quantities may apply. 50 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 20264 ACCESSORIES Connector Kits Web ExpressCode: connects For FlatPAC, FlatPAC-EN, LoPAC, and MegaPAC products All parts are RoHS compliant unless otherwise noted. FlatPAC Accessories MegaPAC Accessories Input and Output Retrofit Kits Description Input connector Output connector Connector Kits Part Number 14136* 14137* Price $6.42 $4.28 Input and Output Mating Connectors Description Input connector, 6 pin1 Output connector, 5 pin1 1 Part Number 32182* 16385* Price $1.60 $1.60 Insertion tool for use with FlatPAC input / output connectors are available from AMP, Inc., part number 58074-1. Manual hand tool, part number 58246-1, interchangeable head. Part Number 19-130047 19-130044 Price $15.00 $10.00 Part Number CSB01* Price $59.00 CSB02* $59.00 Current Share Boards Part Number CSB01* Price $59.00 CSB02* $59.00 Current Share Boards Description MegaPACs using VI-200 and VI-J00 Series modules MegaPAC using Maxi modules Description 2 holes 3 holes 4 holes 5 holes Series bus bar Part Number 88-00033-01 88-00033-02 88-00033-03 88-00033-04 88-00043 Price $1.00 $1.00 $1.00 $1.00 $1.00 FlatPAC-EN Accessories Connector Kit PFC FrontEnd Accessories Description Din Rail Mounting Kit Connector Kit VIPAC Array Adapter Price $20.00 $30.00 $6.00 $5.00 Bus Bars Connector Kits Description LoPACs using VI-200 and VI-J00 Series modules LoPACs using Maxi, Mini and Micro Series modules Part Number 19-130040 19-130041 19-130042 96-00032-01 MegaPAC chassis and ConverterPACs can be purchased separately for scalable systems and / or spares. LoPAC Accessories Description PFC Mini PFC Micro, PFC MicroS Description Single-phase input Three-phase input DualPAC output ConverterPacs Air block Part Number 19-130060 19-130059 10-130182 Description FlatPAC-EN Price $12.00 $30.00 $25.00 Part Number 19-130044 Price $10.00 CSB01* $59.00 CSB02* $59.00 Current Share Boards FlatPAC-EN using VI-200 and VI-J00 Series modules FlatPAC-EN using Maxi, Mini and Micro Series modules * Not RoHS compliant U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 51 QUALITY Web ExpressCode: quality Technical Support Quality System Vicor is ISO 9001:2000 Certified through TUV Management Services. Using a process approach to continuous improvement, this certification covers all facets of the corporation including operations, engineering, and sales. ISO 9001:2000 Certification is recognized internationally as the standard for verifying that a company has achieved recognized quality standards and employs continuous improvement to constantly improve their operations. Vicor places heavy emphasis on the "Plan-Do-Check-Act" model (PDCA) to foster continuous improvement. We focus on key performance metrics that are continuously measured and results reviewed. This enables proactive actions to be undertaken to improve our technology, our products, our processes, and our service to our customers. Quality Center Online The Vicor Quality Center provides you with the specific information you need about Vicor's comprehensive quality systems. You can create a custom quality report, take a video tour of our 230,000 sq. ft factory, or walk through every step of our quality process. If there's something you can't find, ask our Vicor Quality Team about your specific question. Our goal is your total satisfaction. Explore Vicor's quality systems through a robust library of documentation, videos, and process charts. Generate a report based on ISO 9001:2000 criteria that entirely meets your specific requirements. Get your report in PDF format with hyperlinks to videos and other info of your choosing. v i c o r p o w e r. c o m Quality Library See and hear quality systems at work Choose from a whole listing of quality videos shot at our manufacturing plant in Andover, Massachusetts. Many process stages can easily be accessed and viewed by simply clicking a button. The videos take you each step of the way through module development process, from handling to washing of the module brains, to the label processes. Whitepapers that talk about quality specifics ISO 9001:2000 certificates RoHS compliant information Get in touch with our quality team Play Video >> 52 Experience Vicor's Quality Center vicorquality.com Play Video >> Play Video >> U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Play Video >> Play Video >> RoHS Web ExpressCode: rohs Technical Support RoHS Compliance Vicor Corporation has a strong commitment to protecting our environment. As an ISO 9001:2000 registered company and a member of the global community, we are dedicated to meeting government regulations, international standards, and our customers' requirements. To those ends, we have developed and currently maintain Environmental Management Systems (EMS) and the requisite controlled business, design, and manufacturing processes to service our worldwide customer base. ISO 9001:2000 Certified Dedicated to developing and maintaining design and manufacturing processes to competitively service our world-wide customer base that meet government regulations, international standards, and our customers requirements. Environmental Management Systems As a result of our EMS program, Vicor is pleased to announce the availability of component-level (brick) products that fulfill the requirements of the European RoHS Directive 2002/95/EC restricting the use of certain hazardous substances. Higher-level configurable power supply systems, manufactured by both Vicor and its Westcor Division, will be available in RoHS-compliant versions. Go to vicorpower.com for availability on these RoHS products. Vicor allows customers to specify RoHS-compliant brick products through a simple part numbering change. The process is available at vicorpower.com. To support customers who may have exemptions or in industries that do not desire RoHS-compliant materials, Vicor will continue to provide non-RoHS products. Vicor remains committed to exceeding our customers' needs and actively participating in improving our global neighborhood through environmentally friendly initiatives. Vicor's EMS team is ready to assist you with any question you may have related to our RoHS products. Please feel free to contact us. Announcement! Component-level (brick) products are now available that meet European RoHS Directive 2002/95/EC restricting the use of certain hazardous substance. 53 CONFIGURATOR Web ExpressCode: Do-It-Yourself Power Design cmds Custom Design Systems Design your own DC-DC converter or configurable power supply - online - anytime using Vicor's custom configurators. Designs that you create are saved in your "My Designs" account for future review and editing. You only have to register once to access all Vicor's custom configurators via the "Single Sign-On" feature. SINGLE SIGN-ON With Vicor's Custom Module Design System you can design your own DC-DC converters using our proprietary simulator or using hundreds of predefined designs. You simply specify design parameters such as input voltage range, output voltage set point, output power, packaging, and environmental options. A true expert system, our Custom Module Design System generates a variety of valid designs, ranks them all, and selects the optimum one. A unique part number, unit price, and delivery schedule will be returned to you. You can even order online. My Designs An online tool for storing your designs you create VCADTM is a patented system that enables users to specify online, the design of Vicor's VIPAC family from available input voltages, output configuration, thermal features, mechanical configurations, and an optional power-up / power-down sequencing feature. And, VSPOCTM (Vicor Systems Product Online Configurator) enables the registered user to specify and verify complete AC-DC power supplies in real time. The system is fully integrated with Westcor manufacturing operations. Once the user approves the product configuration, a bill of materials is generated and an order can be placed immediately. Vicor is committed to meeting designers' needs via mass customization. All our manufacturing facilities have this capability. We'll support you with the best applications group in the industry. Thousands of designers worldwide have taken advantage of custom Vicor DC-DC converters and power supplies designs. You can, too. 54 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM Custom Module Design System Design your own DC-DC converters at vicorpower.com MASS CUSTOMIZATION Computer Integrated Manufacturing Web ExpressCode: quality Andover, MA Facilities Vicor manufactures its DC-DC converters and configurable products at an exceptional facility in Andover, Massachusetts, USA. There is no power conversion manufacturing facility in the world quite like it. Only at Vicor are you able to get the exact power solution that you want whether it's one unit or one million units. Vicor built this 230,000 sq. ft. manufacturing facility around a model of true mass-customization and total quality. Computer Integrated Manufacturing (CIM) makes it all possible. Once underway, every module in the manufacturing process is recognized by a unique number assigned to it. It's tracked throughout its build, station to station, and is required to successfully pass all electrical, extended environmental, and mechanical requirements at every point of the manufacturing process. If it doesn't pass, the CIM system will not allow the module to proceed to the next station. ISO 9001 Certified since 1993 Also unique to Vicor is individual final test data for each converter available on vicorpower.com for every I-, H-, and M-Grade module. Each module undergoes extensive postproduction environmental stress screening before shipment to verify compliance with Vicor's high-quality performance standards and to eliminate early-life failures. This constant checking and monitoring at each stage of manufacture ensures the highest levels of quality and reliability for our customers. Since 1993, Vicor has been ISO-9001 certified and is engaged in proactive continuous-improvement programs. Quality, reliability, and performance are integrated into every aspect of our products. Our goal is your total satisfaction. U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM 55 VICORPOWER.COM Use the Power of the Web vicorpower.com Develop your power solution by going to vicorpower.com. It's one of the premiere power-conversion sites on the web. Vicorpower.com is especially designed to get you the information you need quickly. And, through Vicor's unique mass-customization capabilities, we can provide you with exactly the power specifications you want at a price that's always affordable. Whether it's converters, user-configurable or custom power, Vicor has the solution. Here's what you'll find on vicorpower.com Product configurators and a converter simulator that specifically analyzes your best options Technical seminars with synchronized video, PowerPoint, and access to related resources Webcasts on technical subjects of interest Application demonstrations Online catalog with direct links to product pages, data sheets, and mechanical drawings Dedicated quality site with detailed factory tour and a custom quality report generator Technical articles that cover a huge range of applications challenges Data sheets and mechanical drawings for all Vicor products Feel free to contact Applications for any technical question you may have at 1 (800) 927-9474 or Vicor Express for price and delivery at 1 (800) 735-6200. For all other phone numbers, please see back cover. DATA SHEETS MECHANICAL DRAWINGS VIDEOS vicorpower.com Experience one of the premiere power conversion sites on the web 56 U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER VICORPOWER.COM CONFIGURATORS SUPPORT Powerful Experience When It Counts Web ExpressCode: support Applications and Customer Support Specialists Contact the Vicor Applications Group or our Customer Support Specialists and experience Vicor's special commitment to your design. There's one goal at Vicor: to help you optimize your power design faster and always affordably. Our worldwide applications engineering staff is ready to give technical support, and our Customer Support Specialists will provide price and delivery information. They can easily be reached via email, at vicorexp@vicr.com or apps@vicr.com. Here's how we can help Applications Engineers Evaluate specific customer design issues and offer a wide range of component-based power solutions Answer technical questions by phone, fax, email, or via the Vicor website. Assist with component-based power system design Support user needs through visits to your facilities Customer Support Specialists Provide price and delivery information Help select the most appropriate product for your application Can arrange a visit to your site by a Vicor Applications Engineer or Sales Representative Fulfill literature requests Process purchase order requirements Provide order status information You'll also have access to Vicor's online power conversion design tools. These range from easy-to-use standard product configurators to real-time custom design generators. Vicor accepts VISA, MasterCard, American Express, a bank check or money order; an open account with established credit, or COD. Most products are covered by a two-year limited warranty. See vicorpower.com/warranty for the complete warranty statement. All prices shown are single quantity unless otherwise noted. F.O.B. Andover, Massachusetts, and Sunnyvale, California, USA. For international pricing, please contact your local Vicor office or distributor. 57 USA Europe Asia-Pacific vicorpower.com vicoreurope.com Vicor Corporation (Corporate Headquarters) 25 Frontage Road Andover, MA 01810-5413 Vicor France Tel: +33 1 34 52 18 30 France: 0800 419 419 Benelux: 00 800 419 419 20 Fax: +33 1 34 52 28 30 E-mail: vicorfr@vicorpower.com Vicor Japan Co., Ltd. Tel: +81-3-5487-3880 Fax: +81-3-5487-3885 vicr.co.jp For General Information Tel: 978-470-2900 Fax: 978-475-6715 For Technical Support Tel: 800-927-9474 Fax: 978-749-3341 E-mail: apps@vicorpower.com For Sales Support (Vicor Express) In U.S. and Canada: 800-735-6200 Fax: 978-475-6715 E-mail: vicorexp@vicorpower.com Vicor Corporation Lombard, IL 60148 Tel: 630-769-8780 Fax: 630-769-8782 Vicor, Westcor Division Sunnyvale, CA Tel: 408-522-5280 Fax: 408-774-5555 Vicor Germany Tel: +49 89 962 439 0 Germany: 0800 018 29 18 Denmark: 00800 8426 7000 Austria: 0800 20 37 27 Fax: +49 89 962 439 39 E-mail: vicorde@vicorpower.com Vicor Hong Kong Tel: +852-2956-1782 Fax: +852-2956-0782 vicor-asia.com In Latin America: Call the number below and ask the operator to connect you to 800-735-6200. Argentina: 800-555-4288 Brazil: 0800-890-0288 Mexico: 011 52 333 647 7881 Vicor Italy Tel: +39 02 22 47 23 26 800 899 677 Fax: +39 02 22 47 31 66 E-mail: vicorit@vicorpower.com Vicor UK Tel: +44 1276 678222 UK: 0800 980 8427 Sweeden: 020 794 143 Fax: +44 1276 681269 E-mail: vicoruk@vicorpower.com Picor Corporation Slatersville, RI Tel: 401-235-1100 Fax: 401-235-1117 picorpower.com Vicor Integration Architects (VIAs) Aegis Power Systems Murphy, NC Tel: 828-837-4029 Fax: 828-837-4106 e-mail: aegis@aegispower.com www.aegispower.com Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 Fax: 512-259-4438 e-mail: sales@freedompower.com www.freedompower.com Mission Power Solutions Oceanside, CA Tel: 760-631-6846 Fax: 760-631-6972 e-mail: sales@mpwrs.com www.mpwrs.com Convertec Corporation Roseville, Minnesota Tel: 651-604-0289 Fax: 651-604-0293 e-mail: eswanson@vicr.com Granite Power Technologies Manchester, NH Tel: 603-623-3222 Fax: 603-627-3222 e-mail: tduff@granitepower.com www.granitepower.com Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 Fax: 503-652-6868 e-mail: info@npi-inc.com www.npi-inc.com (c) Vicor Corporation 2006 Printed in USA, 32765, 5/06