Vicor's product line of modular power components and complete power systems
includes thousands of combinations of input voltage, output voltage, and power
levels, complete with accessory components that integrate other power system
functions. Together, these products allow designers around the world to meet their
unique power requirements by selecting and interconnecting standard modular
parts. The benefits for you are rapid, flexible design of complete power systems at
any power level.
If you don't find the converter you need from our thousands of predefined DC-DC
converters, you can design your own custom product on the web using Vicor's
Custom Module Design System. Vicor offers a wide range of solutions with 1 – 20
outputs and autoranging, PFC, or three-phase inputs. There are several chassis sizes
to choose from with and without integral cooling fans. Also available from Vicor is
a strong offering of front ends and filters to complete your design. Vicor's extensive
MIL-COTS product line incorporates the technology and features of our commercial
products into a cost-effective alternative for military, aerospace, and other high-
reliability, harsh-environment applications. Standard inputs of 28, 48, 155, 270,
and 375 Vdc are available.
Vicor is pioneering the second wave of the power component revolution with the
introduction of flexible, high-performance power components: V•I Chips. Factorized
Power Architecture provides the means to more efficient power distribution and the
V•I Chips provide the building blocks with the right attributes of high density and
efficiency, flexibility and fast transient response that enable power architects to
more easily design small, high-performance, cost-effective power system solutions.
V•I Chip PRMs (regulation), VTMs (transformation and isolation) and BCMs (bus
conversion) are available for a wide range of DC-DC conversion and Intermediate
Bus Architecture applications. Mil-COTS versions are also available.
Vicor Integration Architects (VIAs) provide custom power solutions for communications,
industrial, datacom, test equipment, medical diagnostics, and MIL-COTS. Using the
extensive Vicor line of DC-DC converters in a modular, building-block design
approach, VIAs offer complete solutions to unique power requirements in the
shortest possible time.
All Vicor products deliver agency-approved reliability and the predictable
performance of field-proven power technology, including conformance to RoHS if
desired. Vicor is ISO 9001:2000 certified and places heavy emphasis on the "Plan-
Do-Check-Act" model (PDCA) to foster continuous improvement. This enables
proactive actions to be undertaken to improve our technology, our products, our
processes, and our service to our customers. Vicor's new Quality Center on
vicorpower.com enables quality managers, purchasing agents, and designers to see
comprehensive video of Vicor's facilities as well as generate customized ISO
9001:2000 reports about Vicor's quality systems.
Be assured that Vicor is always on a continuous quest for the best technical
solution for you. And, our commitment to the elegance and affordability of your
design is backed up by our global staff of experienced applications engineers.
Rely on Vicor as your dedicated design partner.
Vicor Corporation Power Solutions
U.S. & CANADA ONLY: 800-735-6200
VICORPOWER.COM
1
Vicor develops new products all the time, so, to keep everyone up-to-date,
we've created a special area on vicorpower.com where you can always see
“what's new." Just go to vicorpower.com and click on “What's New." It will
take you to our new products page. From there you'll be able to link to
detailed design information.
Web
ExpressCode
Web ExpressCode
Web Express Code
Web ExpressCode provides quick access
to detailed product information.
Each product description in the Vicor catalog includes a unique Web
ExpressCode. Each code provides direct access to the corresponding, infor-
mation-rich product pages on vicorpower.com. Just enter the Web
ExpressCode into the Web ExpressCode search box on vicorpower.com's
homepage. You'll be sent to the exact page you want with access to all
related information such as product description, operating specifications,
access to data sheets, outline drawings, and product configuration tools.
Go dir
Go directly
ectly
to the tech
to the tech-
-
nical
nical
infor
information
mation
you need!
you need!
TABLE OF CONTENTS
Product Overview Chart ...................................2 – 3
Power Conversion Components (V•I Chips).... 4 – 7
Bus Converter Module (BCM), Pre-Regulator Module
(PRM), Voltage Transformation Module (VTM)
Intermediate Bus Converters (IBC).........................8
DC-DC Converters ...........................................9 – 15
VICBrick, VI-200 and VI-J00 Series Converter Modules,
Battery Charger (BatMod), Maxi, Mini and Micro Series
Converter Modules
AC-DC Front Ends..........................................16 – 19
Harmonic Attenuator Module (HAM), Alternating Input
Module (AIM), Autoranging Rectifier Module (ARM),
Filter / Autoranging Rectifier Module (FARM), Modular
AC Front-end System (ENMods)
Filters ............................................................ 20 – 23
Active EMI Filters (QPI Family), Output Ripple
Attenuators (QPO Family), Filter Input Attenuator
Module (FIAM), Input Attenuator Module (IAM),
Ripple Attenuator Module (RAM), Output Ripple
Attenuator Module (MicroRAM)
MIL-COTS Products....................................... 24 – 27
Configurable Power Solutions .................... 28 – 42
AC-DC / DC-DC Configurable Power Solutions
(VIPAC Power System, RackGuard), DC Input Power
Systems (VIPAC Arrays, ComPAC, DC MegaPAC),
AC-DC Power Supplies (FlatPAC, FlatPAC-EN, LoPAC
Family, MegaPAC Family, PowerBank, Badger),
Chassis-mount for VI-200 and VI-J00 Series (MegaMods),
Output FrontEnd (PFC FrontEnd), Single Output Power
System (PFC FlatPAC)
Custom Power Solutions ............................. 43 – 44
Accessories.................................................... 45 – 51
Vicor Quality ........................................................ 52
RoHS Compliance................................................. 53
Online Tools ......................................................... 54
Mass Customization............................................. 55
Technical and Customer Support.........................57
For contact information, see back cover.
AC-DC Products
AC-DC Products DC-DC Products
DC-DC Products
Universal
85 – 264 Vac
Universal
85 – 264 Vac
Universal
85 – 264 Vac
Autoranging
90 – 132 Vac
180 – 264 Vac
Autoranging
90 – 132 Vac
180 – 264 Vac
Autoranging Rectifier Module
Up to 1,500 W
Filter / Autoranging Rectifier Module
Up to 1,000 W
Rectifier / EMI Filter
Up to 250 W
Harmonic Attenuator Module
Unity Power Factor
Up to 675 W per module
EMI Filter / Transient Protection
Up to 400 W
Active EMI Filter
Up to 576 W @ 48 V
10 – 400 Vdc
24 Vdc, 28 Vdc
48 Vdc,
270 Vdc, 300 Vdc
24 Vdc, 28 Vdc,
48 Vdc
Autoranging
90 – 132 Vac
180 – 264 Vac
Autoranging
90 – 132 Vac
180 – 264 Vac
Autoranging
115 – 230 Vac
Input
Nominal Input
18 – 425 Vdc
28 Vdc, 48 Vdc,
270 Vdc
24 Vdc, 28 Vdc,
48 Vdc
Harmonic Attenuator Module
Unity Power Factor
Up to 675 W
per module
Filter / Autoranging Rectifier Module
Up to 1,000 W
Autoranging Rectifier Module
Up to 1,500 W
Front-end System
for EN Compliance
Up to 550 W
Transient Protection,
Inrush Current Limiting EMI Filter
Up to 25 A
Active EMI Filter
Up to 576 W @ 48 V
DC-DC Converter
25 – 200 W per module
1 – 95 Vdc
DC-DC Converter
Up to 600 W per module
1 – 54 Vdc
QPO provides active filtering
to achieve differential noise
attenuation.
Output Ripple Attenuation
Module combines active and
passive filtering.
MINIHAM
FARM3
QPI
More Power? Add a Booster.
Another Output? Add a Driver.
Programmable Current Source
DC-DC Converter
10 – 100 W per module
DC-DC Converter
Up to 300 W per module
1 – 48 Vdc
DC-DC Converter
Up to 150 W per module
1 – 48 Vdc
Single wire paralleling for
high power, fault tolerant arrays.
Output Ripple Attenuation Module
combines active and passive filtering.
QPO provides active filtering to
achieve differential noise attenuation.
V•I Chip Solutions
QPO
QPI
EMI Filter
Hot-Swap Controller
24 Vdc, 48 Vdc
QPI
QPO
330 – 365 Vin
360 – 400 Vin
DC-DC Products
DC-DC Products
BCM
BCM
38 – 55 Vin
36 – 75 Vin
BCM
PRM
18 – 36 Vin PRM
DC-DC Products
10.3 – 11.4 Vdc @ 240 W
Bus Converter Module
11.2 – 12.5 Vdc @ 300 W
Bus Converter Module
2.4 – 55 V, Up to 300 W
Bus Converter Module
Up to 240 W
Pre-Regulator Module
Up to 120 W
Pre-Regulator Module
16 – 50 Vin M-PRM
Up to 120 W
MIL-COTS Pre-Regulator Module
VTM Voltage Transformation Module 0.8 – 55 V
Up to 100 A or 300 W
M-VTM MIL-COTS Voltage Transformation Module 1 – 50 V
Up to 100 A or 120 W
RAM
VI-200 / MI-200
VI-200 / MI-200
VI-J00 /
MI-J00
IAM /
MI-IAM
48 Vin
VICBrick
Up to 220 W per module
1 – 48 Vdc
Component Power Solutions: Maxi, Mini, Micro & VICBrick Series
HAM
High-Boost
Component Power Solutions: VI-200 & VI-J00 Series
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
2
OVERVIEW
Up to 300 W
VI-J00/
MI-J00
Front-end filtering optimized for communication and defense applications
Up to
900 W
Up to
1,500 W
Up to
500 W
(425 W for
EN compliance)
Up to 600 W
Parallel for
High Power
Up to
750 W
Up to 600 W
Up to 600 W
1 – 3 Outputs using
VI-200 / MI-200
Series Modules
1 – 3 Outputs using
VI-200 / MI-200 or
VI-J00 / MI-J00
Series Modules
1 – 4 Outputs using
Maxi, Mini and Micro
Series Modules
1 – 20 Outputs using
VI-200, VI-J00 and Maxi
Series Modules
1 – 4 Outputs using
VI-200, VI-J00 Series or
Maxi, Mini and Micro
Series Modules
1-3 Outputs using
VI-200 Series Modules
1 – 6 Outputs using
VI-200, VI-J00 Series or
Maxi, Mini and Micro
Series Modules
1 – 3 Outputs using
Maxi, Mini and Micro
Series Modules
90 – 132 Vac
180 – 264 Vac
or
DC Input
36 – 75 Vdc
DC Inputs
24 Vdc, 28 Vdc,
48 Vdc, 270 Vdc,
300 Vdc
DC Inputs
10 – 400 Vdc
DC Inputs
24 Vdc, 48 Vdc,
300 Vdc, 375 Vdc
85 – 264 Vac
3ø 208/240 Vac
90 – 132 Vac
180 – 264 Vac
90 – 132 Vac
180 – 264 Vac
85 – 264 Vac
Maxi
Maxi
Mini
Micro
Maxi
Mini
Micro
Maxi
Mini
Micro
VI-200
VI-200
VI-200
VI-200 /
MI-200
VI-200 /
MI-200
VI-J00
Maxi
Mini
Micro
VI-200
VI-J00
VI-J00 Up to
4,000 W
VIPAC Power Systems
LoPAC Family
FlatPAC Family
FlatPAC-EN
MegaPAC Family
VIPAC Arrays
ComPAC Family
MegaMod Family
(Chassis Mount)
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
3
OVERVIEW
V•I CHIP SOLUTION
ZVS / ZCS isolated Sine
Amplitude Converter
Input: 38 – 55 Vdc
Output: Ten models, 3 to 48 V
Power: Up to 300 W (450 W for 1 ms)
Efficiency: Up to 97%
High density: Up to 1,095 W/in3
(68 W/cm3)
Small footprint: 1.1 in2(7.1 cm2)
125°C operation
Low weight: 0.5 oz (14 g)
>3.5 million hours MTBF
Low noise: No output filtering required
J-Lead package pick & place /
SMD compatible
48 V BCM Bus Converter Module
page 5
48 Vin ZVS buck / boost regulator
Input: 36 – 75 Vdc
Provides 26 – 55 Vdc output
factorized bus for 48 Vin VTMs
Efficiency: Up to 97%
High density: Up to 875 W/in3
(55 W/cm3)
Small footprint: 1.1 in2(7.1 cm2)
125ºC operation
Low weight: 0.5 oz (14 g)
J-Lead package pick & place /
SMD compatible
48 V PRM Pre-Regulator Module
page 6
48 Vin Sine Amplitude Converter
26 – 55 Vdc input range
0.8 – 55 Vdc outputs
Efficiency: Up to 97%
High density: Up to 365 A/in3or
1,095 W/in3
Up to 100 A or 300 W
Small footprint: Up to 93 A/in2or
225 W/in2
125ºC operation
Low weight: 0.5 oz (14 g)
Isolation to 2,250 Vdc
<1 µs transient response
Low noise: No output filtering required
J-Lead package pick & place /
SMD compatible
VTM Voltage Transformation Module
page 7
✩
✩
✩
MIL-COTS Version
Available – Page 24
✩
✩
✩
MIL-COTS Version
Available – Page 24
ZVS / ZCS isolated Sine
Amplitude Converter
330 – 365 Vdc to 11 Vdc @ 240 W
360 – 400 Vdc to 12 Vdc @ 300 W
Efficiency: Up to 97%
High density: Up to 1,095 W/in3
Small footprint: 1.1 in2(7.1 cm2)
125°C operation
Isolation to 4,242 Vdc
>2.6 million hours MTBF
Low noise: No output filtering required
Low weight: 0.5 oz (14 g)
J-Lead package pick & place /
SMD compatible
High Voltage BCM Bus Converter Module
page 5
24 Vin ZVS buck / boost regulator
Input: 18 – 36 Vdc
Provides 26 – 55 Vdc output
factorized bus for 48 Vin VTMs
Efficiency: Up to 95%
High density: Up to 438 W/in3
(27 W/cm3)
Small footprint: 1.1 in2(7.1 cm2)
125ºC operation
Low weight: 0.5 oz (14 g)
J-Lead package pick & place /
SMD compatible
24 V PRM Pre-Regulator Module
page 6
Support EN55022, Class B limits
Compatible with 48 and 24 V V•I Chips
Efficiency: >99%
Up to 65 dB CM attenuation at 1 MHz
Up to 80 dB DM attenuation at 1 MHz
7 A models; parallelable for up to 14 A
Hot-swap models available
Supports AdvancedTCA®PICMG3.0
requirements
12,5 x 25 x 4,5 mm LGA package
25 x 25 x 4,5 mm package for
Hot-swap models
QPI for V•I ChipsInput Filter Module
page 22
BRICK SOLUTION
Up to 600 W
96% efficiency @ 9.6 Vdc
600 W @ 55ºC, 400 LFM
125°C operating temperature
400 W/in3power density
38 – 55 Vdc input range
3.5 MHz switching frequency
VICBrick IBC Intermediate Bus Converter
page 8
36 – 75 Vdc input
100°C operation
High efficiency
Low noise
Low profile: 0.35” in height
Up to 84 A/in3 or 185 W/in3
Industry standard footprint
VICBrickDC-DC Converter
page 9
Input voltage ranges: 10 – 400 Vdc
Output voltages: 1 – 95 Vdc
Output power (per module):
VI-200: 50 – 200 W •VI-J00: 25 – 100 W
Parallelable for higher power
100°C operation: 85°C for VI-200
Efficiency: Up to 90%
Agency approvals: CE Marked
cULus, cTÜVus
VI-200 / VI-J00 DC-DC Converter
page 10
24 V input: 18 – 36 Vdc
48 V input: 36 – 75 Vdc
300 V input: 180 – 375 Vdc
375 V input: 250 – 425 Vdc
100°C, no derating
High efficiency
Low-noise ZCS / ZVS
Up to 120 W/in3
Maxi / Mini / Micro DC-DC Converter
page 14
>60 dB CM attenuation at 250 kHz
>80 dB DM attenuation at 250 kHz
Up to 14 A
Efficiency: >99% at full load
Surface-mount, LGA package
Designed to support EN Class B
Integrated hot-swap in select models
Current rating supports ATCA®blades
QPI Family Input Filter Modules
page 20
>30 dB PARD attenuation, 1 kHz
to 500 kHz
3 – 30 and 0.5 – 5.5 V input models
Up to 20 A
Supports precise point-of-load regulation
Reduces required number of output
capacitors to support dynamic loads
User selectable optimization of
attenuation, power dissipation, and
transient load response
QPO Family Output Filter Modules
page 21
Up to 1,000 W power output
85 – 264 Vac input
Efficiency: 90 – 98%
Agency approvals:
CE Marked, cTÜVus, cULus
Operating temperature:
–55°C to +100°C
Inrush current limiting
Front-end Modules
pages
16 - 17
24, 48 and 300 V models
Efficiency: Up to 98%
Agency approvals:
CE Marked, cTÜVus, cULus
Operating temperature:
–55°C to +100°C
Designed to meet EN Class B, Bellcore
and FCC transient and immunity
Input Filter Modules
page 22
✩
✩
✩
MIL-COTS Version
Available – Page 25
✩
✩
✩
MIL-COTS Version
Available – Page 25
✩
✩
✩
MIL-COTS Version
Available – Page 25 ✩
✩
✩
MIL-COTS Version
Available – Page 26
5 – 50 V; Up to 20 A
3 – 30 V; Up to 30 A
Efficiency: Up to 98%
Up to 40 dB attenuation
from 60 Hz to 1 MHz
Operating temperature:
–55°C to +100°C
Output Filter Modules
page 23
✩
✩
✩
MIL-COTS Version
Available – Page 26
Input voltage ranges:
85 – 264 Vac and 100 – 380 Vdc
Output voltages: 2 – 95 Vdc (higher
voltage available with series arrays)
Output power: 25 – 1,500 W
Up to 6 user-specifiable outputs
Power density up to 11 W/in3
Agency approvals:
CE Marked, cTÜVus
LoPAC Family Switcher Power Supplies
page 36
✩
✩
✩
MIL-COTS Version
Available – Page 27
✩
✩
✩
MIL-COTS Version
Available – Page 27
CONFIGURABLE SOLUTION
Input voltage ranges:
115/230 Vac or 36 – 75 Vdc
Output voltages: 2 – 48 Vdc
Output power: Up to 900 W
Single, dual, or triple outputs
Efficiency: 80 – 90%
Local or remote control
Agency approvals:
CE Marked, cTÜVus, cULus
VIPAC AC-DC or DC-DC Power Solution
page 28
Input voltages: 24, 48, 300 or 375 Vdc
Output voltages: 2 – 48 Vdc
Output power: 50 – 600 W
Array power: Up to 750 W
Single, dual, triple or quad outputs
Rugged, low profile, coldplate chassis
High-temperature capability
Agency approvals: CE Marked,
cTÜVus, cULus
VIPAC ArraysDC Input Power System FlatPAC AC-DC Power Solution
page 29
Input voltage:
115/230 Vac input, autoranging
Output voltages: 1 – 95 Vdc
Output power: 50 – 600 W
Single, dual, or triple outputs
Low-noise ZCS / ZVS power technology
Agency approvals:
CE Marked, cTÜVus, cULus
page 30
Input voltages:
24, 48 and 300 Vdc
Output voltages: 1 – 95 Vdc
Efficiency: 80 – 90%
Up to 10 W/in3
Low-noise FM control
ZCS / ZVS power architecture
Agency approvals: CE Marked,
cTÜVus, cULus
ComPAC DC-DC Input Power Solution
page 31
Input voltage range:
10 – 400 Vdc
Output voltages: 1 – 95 Vdc
Output power: Up to 600 W
Single, dual, or triple outputs
Efficiency: 80 – 90%
Low-noise ZCS power architecture
Agency approvals: CE Marked,
cTÜVus, cULus
MegaModChassis-mount DC-DC Converter
page 32
Input voltage ranges:
85 – 264 Vac and 100 – 385 Vdc
Output power: Up to 2,200 W
Up to 4 non-isolated outputs
Operating temperature:
–20°C to +45°C (full power)
DIN rail mountable
Agency approvals:
CE Marked, cTÜVus
PFC FrontEndOutput Front-end Power Supply
page 34
Input voltage range:
85 – 264 Vac
Output power: Up to 600 W
2 – 54 Vdc
High efficiency
Current limit
Remote sense
Agency approvals:
CE Marked, cTÜVus, cULus
PFC FlatPAC Single-Output Power System
page 35
Input voltage range: 85 – 264 Vac
Output voltage: 2 – 95 Vdc (higher
voltage available with series arrays)
Output power: 25 – 4,000 W
Up to 20 outputs
High power density
Agency approvals:
CE Marked, cTÜVus
MegaPAC Family User-Config. Power Supplies
page 38
✩
✩
✩
MIL-COTS Version
Available – Page 27
FlatPAC-EN AC-DC Power Solution
CONFIGURABLE SOLUTION
CUSTOM SOLUTION
Input voltage ranges:
85 – 132/180 – 264 Vac
180 – 264 Vdc
Output voltages: 2 – 95 Vdc
Output power: Up to 500 W
Up to 4 user-specifiable outputs
Autosense / remote sense
Agency approvals:
CE Marked, cTÜVus
page 40
Input voltage range:
12 – 72 Vdc
Output voltages: 2 – 95 Vdc
Output power: Up to 1,600 W
Up to 16 outputs
Agency approvals:
CE Marked, cTÜVus
DC MegaPAC DC-DC Power Switcher RackGuardRedundant Input Power Supply
page 41
AC Input voltage:
115/230 Vac, Autoranging
DC Input voltage:
48 V (38 – 72 V) or 150 V (105 – 200 V)
Output: 4 to 48 V
Output power: 600 W
Agency approvals:
CE Marked, cTÜVus, cULus
page 41
Input voltage ranges:
85 – 254 Vac (PFC) / 85 – 380 Vdc
Output voltages: Single output 2, 3.3,
5, 12, 15, 24, 28, 48 Vdc
Output power: 600 – 5,400 W
Agency approvals:
CE Marked, cTÜVus, cULus
Javelin MIL-COTS Power Supply
page 42
Input voltage: 115/230 Vac
Output voltages: 1.8 – 52 V
Output power:
1000 W @ 230 Vac input
800 W @ 115 Vac input
Operating temperature:
-20°C to +50°C at full load
Agency approvals:
CE Marked, cTÜVus, cULus
PowerBank AC-DC Low Profile Power Supply
page 42
Input voltage ranges:
85 – 264 Vac and 85 – 380 Vdc
Output power: Up to 2,200 W
Up to 4 non-isolated outputs
Operating temperature:
–20°C to +75°C
DIN rail mountable
Agency approvals:
CE Marked, cTÜVus, cULus
Badger MIL-COTS Power Supply
page 42
✩
✩
✩
MIL-COTS Version ✩
✩
✩
MIL-COTS Version
Vicor can deliver a power supply built to your custom specification through our Vicor
Integration Architects (VIAs). VIAs design and manufacture turnkey custom power
systems for electronic equipment manufacturers in the datacom, telecom, industrial,
test equipment, medical, information technology, and MIL-COTS markets.
VIAs use Vicor component power in a modular, building-block design approach that
offers low cost, quick turnaround, and reliable performance.
For more information on custom solutions, see pages 43 – 44.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
4
DC-DC Web ExpressCode:
V•I Chip
Vicor’s V•I Chips, new families of integrated power components, give the
power architect new ways to create small, cost-effective, high-performance
power system solutions.
V•I Chips increase power system flexibility by separating or factorizing a
DC-DC converter into two components. One component provides a regula-
tion function (PRM), and another provides transformation and isolation
(VTM / BCM). This allows the power system designer to select only the
functions that are needed, where they are needed.
The V•I Chip Advantage Density, Efficiency, Flexibility, and Speed
vichip
SOURCE LOAD
PRM
L
NPNS
VTM
VTM isolation and transformation at the point of load
PRM regulation can be collocated with or remote
from the VTM
Efficiency: Up to 93%
High power density: Up to 430 W/in3
High density bus converter > 1,000 W/in3
Efficiency: Up to 97%
Minimize total system capacitance
Enable twice the current in half the space
Up to 240 W or 200 A
Put VTM stages in series to achieve
output voltages greater than 55 V
SOURCE
LOAD
LOAD
LOAD
LOAD
NPNS
BCM
L
niPOL
L
niPOL
L
niPOL
L
niPOL
1/4 the capacitance volume here...
...little or no capacitance needed here.
PRM
L
NPNS
VTM
NPNS
VTM
LOAD
SOURCE SOURCE
LOAD
PRM
L
PRM
L
NPNS
VTM
NPNS
VTM
SOURCE
LOAD
PRM
L
NPNS
VTM
NPNS
VTM
High Voltage OutputsHigh Power Arrays
Parallel PRMs and VTMs to
create multi-kW power systems
DC-DC Conversion Using PRM and VTM Bus Conversion Using BCMs
System solution with low component count Enable dense IBA Power Systems
High Current Low Voltage Supply
PRM
L
NPNS
VTM
Transformation & Isolation
NPNS
BCM
Regulation
Pre-Regulator Voltage Transformation Bus Converter
Module Module Module
Product shown at actual size.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
5
DC-DC Web ExpressCode:
V•I Chip
Fixed-ratio bus converter
Available in 48, 352, and 384 V inputs
High density: Up to 1,095 W/in3
Isolation to 4,242 Vdc
Efficiency: Up to 97%
No output filtering required
Output power: Up to 300 W
Small footprint: 1.1in2(7.1 cm2)
Pick & place / SMD compatible
125°C operation
>3.5 million hours MTBF
The Bus Converter Module (BCM) is a member of the new family of V•I Chips. It provides an
isolated intermediate bus voltage to power non-isolated POL converters from a narrow range
DC input or can be used as an independent DC source. The BCM offers superior performance
and lower cost than conventional bus converters. BCMs are available in standard 48 V telecom
as well as in high-voltage offline input ranges.
Due to the fast response time and low noise of the BCM, the need for limited life aluminum
electrolytic or tantalum capacitors at the load is reduced – or eliminated – resulting in savings
of board area, materials, and total system cost.
Bus Converter Module BCM
Input Voltage
Designator
Bus Converter
Module
Configuration
F = J-Lead
Output Voltage
Designator
( = Vout X10 )
Output Power
Designator
( = POUT /10 )
Product Grade Temperatures
Grade Storage Operating
T –40 to125°C –40 to125°C
M –55 to125°C –55 to125°C
B 048 F 120 T 30
Part Numbering
For a complete listing of our BCM model numbers, go to vicorpower.com/vichip.
Features
bcm
Vout
Input Voltage K Factor @ 48 Vin Range Max Power BCM Model No.
1/16 3.0 Vdc 2.38 – 3.43 Vdc 210 W B048F030T21
1/12 4.0 Vdc 3.17 – 4.58 Vdc 200 W B048F040T20
1/8 6.0 Vdc 4.75 – 6.87 Vdc 240 W B048F060T24
1/6 8.0 Vdc 6.33 – 9.16 Vdc 240 W B048F080T24
38 – 55 Vdc 1/5 9.6 Vdc 7.60 – 11.00 Vdc 240 W B048F096T24
1/4 12.0 Vdc 9.50 – 13.80 Vdc 300 W B048F120T30
1/3 16.0 Vdc 12.70 – 18.30 Vdc 240 W B048F160T24
1/2 24.0 Vdc 19.00 – 27.50 Vdc 300 W B048F240T30
2/3 32.0 Vdc 25.30 – 36.70 Vdc 300 W B048F320T30
1 48.0 Vdc 38.00 – 55.00 Vdc 300 W B048F480T30
Vout
Input Voltage K Factor @ Nom. Vin Range Max Power BCM Model No.
330 – 365 Vdc 1/32 11.0 Vdc 10.30 – 11.4 Vdc 240 W B352F110T24
360 – 400 Vdc 1/32 12.0 Vdc 11.25 – 12.5 Vdc 300 W B384F120T30
Heat Sinks Available
See page 49
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
6
DC-DC Web ExpressCode: Web ExpressCode:
✩
ZVS buck / boost regulator
Provides factorized bus for 48 Vin VTMs
Available in 24 and 48 V models
Efficiency: Up to 97%
High density: Up to 875 W/in3
Small footprint: 1.1in2(7.1 cm2)
125ºC operation
J-Lead package
Pick & place / SMD compatible
The V•I Chip Pre-Regulator Module (PRM) is a high-efficiency non-isolated regulator capable of
both boosting and bucking a wide-range input voltage. PRMs may be used independently, as
stand-alone regulators, or together with downstream V•I Chip Voltage Transformation Modules
(VTMs) — fast, efficient, isolated low-noise point-of-load (POL) converters.
PRMs feature unique "Adaptive Loop" compensation feedback: a single-wire alternative to
traditional remote sensing and feedback loops that enables precise control of an isolated POL
voltage without the need for either a direct connection to the POL or for noise sensitive, bandwidth
limiting, isolation devices in the feedback path.
Features
Application Examples
Pre-Regulator Module PRM
✩
✩
MIL-COTS Version
Available – Page 24
Input Voltage
Designator
Pre-Regulator
Module
Configuration
F = J-Lead
Nominal Factorized
Bus Voltage
Output Power
Designator
( = Pf/10 )
Adaptive LoopProduct Grade Temperatures
Grade Storage Operating
T –40 to125°C –40 to125°C
M –55 to125°C –55 to125°C
P 048 F 048 T 24 AL
Part Numbering
For a complete listing of our PRM model numbers, go to vicorpower.com/vichip.
V•I Chip
prm
+Out
–Out
+In
–In
VC
PC
TM
IL
VH
PR
NC
SG
SC
PRM-AL
OS
NC
CD
Vout
Vin
-In
PC
VC
TM
+In
-Out
+Out
VTM
+Out
-Out
K
Ro
+Out
–Out
+In
–In
VC
PC
TM
IL
VH
PR
NC
SG
SC
PRM-AL
OS
NC
CD
L
O
A
D
Factorized
Bus (Vf)
Vo = VL ± 1.0%
(Io•Ro)
K
Vf = VL +
K
Vin
ROS
RCD
Max Output
Input Voltage Power Current PRM Model No Trim / Vf Range
36 – 75 Vdc 240 W 5.0 A P048F048T24AL
120 W 4.2 A P048F048T12AL 26 – 55 V
38 – 55 Vdc 170 W 3.5 A P045F048T17AL
18 – 36 Vdc 120 W 2.5 A P024F048T12AL
Regulator DC-DC Converter
Heat Sinks Available
See page 49
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
7
DC-DC Web ExpressCode:
Fixed ratio DC-DC converter
Output: Up to 100 A / 300 W
High density: Up to 365 A/in3 (1,095 W/cm3)
Small footprint: 1.1in2(7.1 cm2)
Low weight: 0.5 oz (14 g)
Pick & place / SMD compatible
Efficiency: Up to 97%
125°C operation
1 µs transient response
>3.5 million hours MTBF
J-Lead package
Isolation to 2,250 Vdc
The Voltage Transformation Module (VTM) provides an isolated voltage to the point of load. Utilizing
a Sine Amplitude Converter (SAC), it offers unprecedented performance in the critical areas of speed,
noise, efficiency and density. VTMs address output requirements from 0.8 – 55 Vdc at up to 100 A,
all in a surface-mount package only one-quarter of a cubic inch in volume. VTMs operate over an
input voltage range of 26 – 55 Vdc — the "factorized bus"— and are a fixed-ratio device that
requires a PRM or other stabilized voltage source for regulation.
Voltage Transformation Module VTM
Features
✩
✩
✩
MIL-COTS Version
Available – Page 24
V•I Chip
vtm
Input Voltage
Designator
Voltage
Transformation
Module
Configuration
F = J-Lead
Output Voltage
Designator
( = Vout X10 )
Output Current
Designator
( = Iout )
Product Grade Temperatures
Grade Storage Operating
T –40 to125°C –40 to125°C
M –55 to125°C –55 to125°C
V 048 F 120 T 025
Part Numbering
For a complete listing of our VTM model numbers, go to vicorpower.com/vichip.
Vout
Input Voltage K Factor @ 48 Vin Range Output Current VTM Model No.
1/32 1.5 Vdc 0.82 – 1.71 Vdc 100 A V048F015T100
1/24 2.0 Vdc 1.09 – 2.29 Vdc 80 A V048F020T080
1/16 3.0 Vdc 1.63 – 3.43 Vdc 70 A V048F030T070
1/12 3.3 Vdc 2.17 – 4.00 Vdc 60 A V040F033T060
1/12 4.0 Vdc 2.17 – 4.58 Vdc 50 A V048F040T050
1/8 6.0 Vdc 3.25 – 6.87 Vdc 40 A V048F060T040
26 – 55 Vdc 1/6 8.0 Vdc 4.33 – 8.98 Vdc 30 A V048F080T030
1/5 9.6 Vdc 6.00 – 11.00 Vdc 25 A V048F096T025
1/4 12.0 Vdc 6.50 – 13.80 Vdc 25 A V048F120T025
1/3 16.0 Vdc 8.70 – 18.30 Vdc 15 A V048F160T015
1/2 24.0 Vdc 13.00 – 27.50 Vdc 12 A V048F240T012
2/3 32.0 Vdc 17.30 – 36.70 Vdc 9 A V048F320T009
1 48.0 Vdc 26.00 – 55.00 Vdc 6 A V048F480T006
Heat Sinks Available
See page 49
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
8
DC-DC Web ExpressCode:
These "VICBrick" Intermediate Bus Converter (IBC) modules use Vicor’s V•I Chip Bus
Converter Modules (BCM) to achieve the highest performance for Intermediate Bus
Architecture applications. Operating from a 38 – 55 Vdc input, 9 different fixed-ratio
outputs are available from 3 to 48 Vdc. You can choose the intermediate bus voltage
that is optimal for your system and load requirements.
These quarter-bricks are available with a single BCM, rated up to 300 W or 70 A, or with
dual BCMs, capable of 600 W or 100 A. Dual output pins are used for output currents
over 50 A.
Intermediate Bus Converters IBC
Up to 600 W
96% efficiency @ 9.6 Vdc
600 W @ 55ºC, 400 LFM
100°C operating temperature
Power density: 500 W/in3
38 – 55 Vdc input range
3.5 MHz switching frequency
Fast dynamic response
Parallelable, with fault tolerance
Industry standard quarter-brick
footprint
Nominal
Input Voltage
Format
I = IBC
C = Quarter Brick Nominal
Output Voltage
( x10 )
Output Power
( ÷10 )
Enable Polarity
P = “+”
M = “–”
Package
Style
Product Grade Temperatures
T = –40 to 125°C
I 048 C 030 T 021 P 2
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Output Full Load Output Bus Converter Number K Factor Full Load ROUT Max Load
Voltage Watts Amps Model No. of BCMs (Transformation Efficiency (%) (mΩ) Capacitance
Ratio)
3.0
150 50.0 I048C030T015P1 1
1/16
94.5 2.0 31,000 µF
210 70.0 I048C030T021P2 1 94.3 2.0 31,000 µF
300 100.0 I048C030T030P2 2 94.1 1.0 62,000 µF
4.0 200 50.0 I048C040T020P1 1 1/12 93.7 2.3 17,000 µF
400 100.0 I048C040T040P2 2 93.5 1.2 34,000 µF
6.0 240 40.0 I048C060T024P1 1 1/8 94.8 4.0 7,600 µF
480 80.0 I048C060T048P2 2 2.0 15,200 µF
9.6 240 25.0 I048C096T024P1 1 1/5 96.3 10.0 3,000 µF
480 50.0 I048C096T048P1 2 5.1 6,000 µF
12.0 300 25.0 I048C120T030P1 1 1/4 96.0 13.0 1,000 µF
600 50.0 I048C120T060P1 2 96.0 6.5 2,000 µF
16.0 240 15.0 I048C160T024P1 1 1/3 95.7 20.0 900 µF
480 30.0 I048C160T048P1 2 10.0 1,800 µF
24.0 300 12.5 I048C240T030P1 1 1/2 95.0 42.0 470 µF
600 25.0 I048C240T060P1 2 21.0 940 µF
32.0
300 9.4 I048C320T030P1 1 2/3 95.0 67.0 200 µF
600 18.7 I048C320T060P1 2 34.0 400 µF
48.0
300 6.3 I048C480T030P1 1 1 96.3 150.0 100 µF
600 12.5 I048C480T060P1 2 75.0 200 µF
Features
Bricks
ibc
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
9
DC-DC Web ExpressCode:
These VICBricks are quarter-brick sized, high-performance DC-DC converters that
conform to industry-standard footprints and pin-outs, while delivering unprecedented
performance in power density, efficiency, transient response, and cost. This superior
performance is enabled by the revolutionary V•I Chip technology with its Sine Amplitude
Converter topology. Dual output pins are used for output currents over 50 A.
DC-DC Converters VICBrick
Typical efficiency vs. output current
1.5 Vout VICBrick
Efficiency vs. Output Current
70
75
80
85
90
0 1020304050607080
Output Current (A)
Efficiency (%)
48 Vin
Features
36 – 75 Vdc input
100°C operation
High efficiency
Low noise
Only 0.36” in height
Nominal
Input Voltage
Format C = Quarter Brick Nominal
Output Voltage
( x10 )
Output Power
( ÷10 )
Enable Polarity
P = “+”
M = “–”
Package
Style
Product Grade Temperatures
T = –40 to125°C
D 048 C 033 T 018 M 2N
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Input Range Model Number
Output Typ. Full Load
Vnom Imax Trim Range Efficiency (%)
D048C010T010M2N 1 100 0.81 – 1.5 Vdc 83
D048C012T012M2N 1.2 100 84
D048C015T012M2N 1.5 80 1.08 – 2.19 Vdc 87
D048C018T014M2N 1.8 80 88
D048C025T017M2N 2.5 70 1.63 – 3.32 Vdc 89
D048C030T016M2N 3.0 55 2.17 – 4.0 Vdc 90
36 – 75 Vdc D048C033T018M2N 3.3 55 91
D048C050T018M1N 5.0 36 3.25 – 6.67 Vdc 92
D048C100T018M1N 10.0 18 6.5 – 13.4 Vdc 92
D048C120T022M1N 12.0 18.3 92
D048C150T020M1N 15.0 13.3 8.67 – 17.9 Vdc 92
D048C240T022M1N 24.0 9.2 13 – 27 Vdc 92
D048C280T019M1N 28.0 6.8 17.4 – 36 Vdc 92
D048C480T022M1N 48.0 4.6 26 – 54.3 Vdc 92
Bricks
vicbrick
Up to 84 A/in3 or 185 W/in3
Industry-standard footprint
Positive or negative logic enable
2,250 Vdc basic insulation
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
10
DC-DC Web ExpressCode:
✩
Input voltage range: 10 – 400 Vdc
Output voltages: 1 – 95 Vdc
Output power (per module):
VI-200 Series: 50 – 200 W • VI-J00 Series: 25 – 100 W
Parallelable for higher power
3,000 Vrms isolation
100°C operation: 85°C for VI-200 Series
Output voltage trim range: 50 – 110%
Efficiency: Up to 90%
Agency approvals:
cULus, cTÜVus, CE Marked
Dimensions:
VI-200 Series: 4.6" x 2.4" x 0.5"
(116,9 x 61,0 x 12,7 mm)
VI-J00 Series: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7 mm)
Weight:
VI-200 Series: 6.0 oz / 170 g
VI-J00 Series: 3.0 oz / 85 g
Low-noise ZCS / ZVS
power architecture
4 environmental grades
VI-200 and VI-J00 converters feature wide input voltage ranges, remote
sense, enhanced output programmability, logic disable, and low quiescent
current. VI-200 product series feature output overvoltage protection and
thermal shut down. VI-J00 product series, at half the size of VI-200
converters, operate to 100˚C. Both product series are safety agency
approved, accelerating your time to market.
Features
DC-DC Converter Modules VI-200 and VI-J00 Series
General Performance Refer to data sheet for detailed specifications
✩
✩
MIL-COTS Version
Available – Page 25
Parameter C-, I-, M-Grade E-Grade
Input voltage and output voltage See Chart A on page 11
Set point accuracy 0.5% 1.0%
Load / line regulation (max) 0.2% 0.5%
Output temperature drift 0.01%/°C 0.02%/°C
Peak-to-peak output ripple (max) 1.5% 3%
Trim range*50 – 110% 50 – 110%
Total remote sense compensation 0.5 V 0.5 V
OVP set point (VI-200 Series only) 125% 125%
Current limit 105 – 125% 105 – 135%
Efficiency (output ≥5 V) 80 – 90% 78 – 88%
Power sharing accuracy (VI-200 Series only) ±5% ±5%
Input reflected ripple current 10% 10%
No-load power dissipation 1.35 W 1.35 W
Isolation
Input to output 3,000 Vrms 3,000 Vrms
Input to baseplate 1,500 Vrms 1,500 Vrms
Output to baseplate 500 Vrms 500 Vrms
Max. baseplate temperature: VI-200 Series (VI-J00 Series) 85°C ( 100°C ) 85°C ( 100°C )
* 10 V, 12 V and 15 V outputs, standard trim range ±10%. Consult factory for wider trim range.
95 V outputs cannot be trimmed up.
Bricks
bricks1
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
11
DC-DC Web ExpressCode:
Part Number Configuration Chart For VI-200 and VI-J00 DC-DC Converters
IMPORTANT NOTICE: PLEASE READ BEFORE STARTING
Below is the part numbering format for Vicor VI-200 and VI-J00
DC-DC converters and configurables. The power levels shown are
not available for every input and output voltage combination.
Refer to Chart A for maximum output power. If you need
more power than a VI-J00 offers, use a VI-200. If you need more
power than a VI-200 (“driver”), add parallel “booster” modules
(of the same power level).
Chart A For input and output voltages not listed, consult factory. See back cover for all phone numbers.
■
VI-200 Series ■VI-J00 Series
Certain output and power combinations are not available for a given input voltage range. Always check with the factory to verify your part number.
For assistance with product selection or part numbers, call your local Vicor office, or visit the part number configurators at vicorpower.com.
Input Voltage Output Current or Power Available Per Module
Des. Nom. (Range) <5 V 5 V 10 V and Higher
5 A 10 A 15 A 20 A 30 A 40 A 25 W 50 W 75 W 100 W 150 W 200 W 25 W 50 W 75 W 100 W 150 W 200 W
ZYXWVUZ YXWVUZYXWVU
012 V (10 – 20 V)
■■ ■■ ■■
■■ ■ ■■ ■ ■■
124 V (21 – 32 V)
■■ ■ ■ ■ ■ ■ ■ ■■ ■■ ■■ ■
■■ ■ ■ ■■ ■ ■ ■■ ■
W24 V wide (18 – 36 V)
■■ ■ ■ ■ ■ ■ ■ ■■ ■■
■■ ■ ■ ■■ ■ ■ ■■ ■
236 V (21 – 56 V)
■■■ ■■■ ■■■
■■ ■■ ■ ■■
348 V (42 – 60 V)
■■ ■ ■ ■ ■ ■ ■ ■■ ■■ ■■ ■
■■■■ ■■■■ ■■■ ■
N48 V wide (36 – 76 V)
■■ ■ ■ ■ ■ ■ ■ ■■ ■■ ■■ ■
■■ ■ ■ ■■ ■ ■ ■■ ■
472 V (55 – 100 V)
■■ ■ ■ ■ ■ ■ ■ ■■ ■■ ■■ ■
■■ ■ ■ ■■ ■ ■ ■■ ■
T110 V (66 – 160 V)
■■ ■ ■ ■ ■ ■ ■ ■■ ■■
■■ ■ ■ ■■ ■ ■ ■■ ■
5150 V (100 – 200 V)
■■■■■ ■ ■■ ■ ■■ ■■■
■■ ■ ■ ■■ ■ ■ ■■ ■
6300 V (200 – 400 V)
■■■■■ ■ ■■ ■■ ■■ ■■■
■■■■ ■■■■ ■■■ ■
7
150/300 V (100 – 375 V)
■■■ ■ ■ ■■ ■
■■ ■■ ■ ■■
Click~A~Brick
vicorpower.com
Bricks
prodselect
VI - J 6 1 - C W
Family Series Input Output Grade Power
VI Non-RoHS 2200 012 V 472 V Z2V M10 V K40 V E–10°C U200 W
VE RoHS JJ00 124 V T110 V Y3.3 V 112 V 448 V C–25°C V150 W
BBooster W24 V 5150 V 05V P13.8 V H52 V I–40°C W100 W
236 V 6300 V X5.2 V 215 V F72 V M–55°C X75 W
348 V 7150/300 V W5.5 V N18.5 V D85 V Y50 W
N48 V V5.8 V 324 V B95 V Z25 W
T6.5 V L28 V
R7.5 V J36 V
Features
Input voltages: 48, 150 or 300 V
Programmable output current
Booster versions for higher
output current applications
Agency approvals:
cULus, cTÜVus, CE Marked
Dimensions:
4.6" x 2.4" x 0.5"
(116,9 x 61,0 x 12,7 mm)
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
12
DC-DC Web ExpressCode:
The fully-programmable BatMod current source module is based on the
VI-200 Series of DC-DC converters. It accepts 48, 150, or 300 V inputs,
provides programmable output current, and is well-suited for such
applications as battery chargers, welders, metal platers, and laser diodes.
The BatMod is compatible with all major battery types, and is available in
booster versions for higher output current applications.
Input Voltage
Nominal Range
3 = 48 V 42 – 60 V
5 = 150 V 100 – 200 V
6 = 300 V 200 – 400 V
Module
2 = Driver
B = Booster
Family
VI = Non-RoHS
VE = RoHS
Output Voltage
Nominal Range
1 = 12 V 11.25 – 16.5 V
3 = 24 V*22.5 – 33.0 V
4 = 48 V 45.0 – 66.0 V
Product Grade
E = –10 to +85°C
C = –25 to +85°C
I = –40 to +85°C
M = –55 to +85°C
VI-261-EU-BM
*Available in 300 V input only.
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
General Performance Refer to data sheet for detailed specifications
Parameter Remarks
48 Vdc 42 – 60 V
Nominal input voltage 150 Vdc 100 – 200 V
300 Vdc 200 – 400 V
0 – 14.5 A 12 V battery system
Output current 0 – 7.25 A 24 V battery system
0 – 3.6 A 48 V battery system
Current control input 1 – 5 V Zero to max. current
Current monitor output 1 – 5 V Zero to full load
Voltage control input 0 – 2.5 V Zero to FS output
Output voltage set point 15 V, 30 – , 60 V +/-1% 12 V, 24 V, 48 V
Trimmable +10%, –25% Output respectively
Dynamic characteristics V-Mode: 300 µsec typ. Vnom for 50 – 100% Load changes
I-Mode: 250 µsec typ.
Operating temp. / storage temp.
–10 to +85°C, –20 to +100°C E-Grade
–25 to +85°C, –40 to +100°C C-Grade
–40 to +85°C, –55 to +100°C I-Grade
–55 to +85°C, –65 to +100°C M-Grade
Dielectric withstand
Input to output 3,000 Vrms
Output to baseplate 500 Vrms
Input to baseplate 1,500 Vrms
Battery Charger BatMod
Bricks
batmod
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
13
2.28"L x 1.80"W x 0.50"H
(57,9 x 45,7 x 12,7 mm)
4.60"L x 2.40"W x 1.08"H
(116,8 x 61,0 x 27,4 mm)
SlimMod
Flangeless package
BusMod
Chassis mount housing with
screw / lug wiring interface
FinMod
Flangeless package with integral heat sink
To order the SlimMod configuration add
the suffix “– S” to the standard module
part number as shown on page 11.
Available with longitudinal or transverse fins of 0.25" or 0.50" height. Add
the appropriate suffix to the module part number as shown on page 11.
To order the BusMod fully assembled,
add suffix “–B1” to the standard module
part number as shown on page 11.
To order the BusMod separately:
Half-sized BusMod — P/N 18952
Full-sized BusMod — P/N 06322
4.60"L x 1.80"W x 0.50"H
(116,8 x 45,7 x 12,7 mm)
Longitudinal, 0.25" fins — add suffix “–F1”
Longitudinal, 0.50" fins — add suffix “–F2”
Transverse, 0.25" fins — add suffix “–F3”
Transverse, 0.50" fins — add suffix “–F4”
2.28"L x 2.40"W x 1.08"H
(57,9 x 61,0 x 27,4 mm)
Packaging Options Chassis-mount housing for VI-200 and VI-J00 Series modules, see page 32.
Web ExpressCode Number
step 1 – Go to vicorpower.com
step 2 – Enter the express code from this product catalog into the
Web ExpressCode box, shown on our homepage, to get
quick and detailed information about each Vicor product.
step 3 – Click “GO”
DC-DC
Bricks
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
14
DC-DC Web ExpressCode:
✩
24 V input: 18 – 36 Vdc
48 V input: 36 – 75 Vdc
300 V input: 180 – 375 Vdc
375 V input: 250 – 425 Vdc
100°C, no derating
High efficiency
Low-noise ZCS / ZVS
Up to 120 W/in3
3,000 Vac isolation
Single-wire paralleling
Input undervoltage lockout
Output overvoltage protection
Overtemperature shut down
Module fault alarm
ZCS / ZVS power architecture
Output voltage trim: 10 – 110%
Bias supply to power
external circuitry
Logic enable / disable
Low parts count
Low stress levels
Low thermal impedance
Cost effective
5 environmental grades
Fully indexed content
Video demonstrations for many topics
Downloadable application notes,
technical articles, data sheets and
white papers
These DC-DC converter modules use advanced power processing, control,
and packaging technologies to provide the performance, flexibility, and cost
effectiveness expected of a mature power component. High-frequency ZCS / ZVS
switching, advanced power semiconductor packaging, and thermal management
provide high power density with low noise and high efficiency.
Features
✩
✩
MIL-COTS Version
Available – Page 25
DC-DC Converter Modules Maxi, Mini and Micro 24, 48, 300 and 375 V
Parameter Notes
Set point accuracy ±1% Vout nom. Nominal input; full load; 25°C
Line regulation ±0.02% Vout nom. Low line to high line; full load
Load regulation ±0.02% Vout nom. No load to full load; nominal input
Temperature regulation ±0.002% Vout/°C –20 to 100°C (C-Grade)
Remote sense compensation 0.5 V Maxi and Mini only
Overvoltage set point 115% Vout nom.
Current limit 115% Iout max. Vout 95% of nominal
Short-circuit current 115% Iout max. Output voltage <250 mV
Efficiency Up to 90% Nominal input; 80% load; 25°C
Programming range 10 – 110% Vout nom.
Isolation voltage 3,000 Vrms Input to output
Size
Maxi full-brick 4.6" x 2.2" x 0.5" (117 x 55,9 x 12,7 mm) Up to 600 W
Mini half-brick 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) Up to 300 W
Micro quarter-brick 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) Up to 150 W
Agency approvals cULus, cTÜVus, CE Marked
General Performance Refer to data sheet for detailed specifications
Module Mounting &
Interconnect Options
See page 45
Click~A~Brick
vicorpower.com/cmds
Bricks
bricks2
Visit vicorpower.com and
claim your Free CD
Technical Seminar on CD Designing with Component Power
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
15
DC-DC Web ExpressCode:
375 Vin Series Output Power (Watts)
Output Voltage Maxi Mini Micro
2.0 Vdc 160 100 50
3.3 Vdc 264 150 75
5.0 Vdc 400 200 100
12.0 Vdc 600 300 150
15.0 Vdc 600 300 150
24.0 Vdc 600 300 150
28.0 Vdc 600 300 150
48.0 Vdc 600 300 150
54.0 Vdc 600
48 Vin Series Output Power (Watts)
Output Voltage Maxi Mini Micro
2.0 Vdc N/A 100 50
3.3 Vdc 264 150 75
5.0 Vdc 400 200 100/ 75/ 50
12.0 Vdc 500 250 150
15.0 Vdc 500 250 150
24.0 Vdc 500 250 150
28.0 Vdc 500 250 150
48.0 Vdc 500 250 150
Description Part Number Price
Maxi board style 24644 $39.95
Mini board style 24645 $39.95
Micro board style 24646 $39.95
Evaluation Boards Evaluation of Maxi, Mini and Micro DC-DC Converters
Three styles: Maxi, Mini or Micro
Inboard and onboard compatible
Easy I /O and control connections
Includes fusing and capacitors
Can be paralleled for higher
power arrays
Maxi converter example: Mini converter example: Micro converter example:
V24A48M400BN V48B28C250BG V375C24C150BG
24 Vin, Maxi, 48 Vout @ 400 W, 48 Vin, Mini, 28 Vout @ 250 W, 375 Vin, Micro, 24 Vout @ 150 W,
long ModuMate pins, slotted baseplate long RoHS pins, slotted baseplate long RoHS pins, slotted baseplate
Part Numbering For Maxi, Mini and Micro Series DC-DC Converters
Bricks
prodselect
Consult factory for other input / output / power models.
* T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
V48 A48 C 500 BL
Input Package Output Product Grade Output Pin Style Baseplate
Voltage A = Maxi Voltage E = –10 to +100°C Power Blank = Short solder Blank = Slotted
B = Mini C = –20 to +100°C L = Long solder 2 = Threaded
C = Micro T = – 40 to +100°C* S = Short ModuMate 3 = Thru hole
H = –40 to +100°C* N = Long ModuMate
M = –55 to +100°C F = Short RoHS
G = Long RoHS
24 Vin Series Output Power (Watts)
Output Voltage Maxi Mini Micro
3.3 Vdc 264 150 75 /50
5.0 Vdc 400 200 100 /50
12.0 Vdc 400 200 100 /50
15.0 Vdc 400 200 100 /50
24.0 Vdc 400 200 100 /50
28.0 Vdc 400 200 100 /50
48.0 Vdc 400 200 100 /50
300 Vin Series Output Power (Watts)
Output Voltage Maxi Mini Micro
2.0 Vdc 160 100 50
3.3 Vdc 264 150 75 /50
5.0 Vdc 400 200 100 /50
12.0 Vdc 500 250 150 /75
15.0 Vdc 500 250 150 /75
24.0 Vdc 500 250 150 /75
28.0 Vdc 500 250 150 /75
48.0 Vdc 500 250 150 /75
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
16
AC-DC Web ExpressCode:
The Harmonic Attenuator Module (HAM) accepts an input of 85 – 264 Vdc. The
“M” version provides a DC output compatible with Vicor’s 26x, J6x and user-
defined Maxi, Mini and Micro DC-DC converters. The “L” version is compatible
with V375 series DC-DC converters. The combination of a HAM, one or more
Vicor DC-DC converters, and the 30205 line filter, listed on page 48, offers a
high-density power solution meeting EN61000-3-2.
Features
Up to 675 W power output
85 – 264 Vac input
Meets EN61000-3-2
0.99 Power Factor
Short-circuit protection
High efficiency
Input-surge limiting
Dimensions:
4.6" x 2.4" x 0.5"
(117 x 61,0 x 12,7 mm)
cULus, cTÜVus, CE Marked
VI-HAM-CL
30205
Line Filter
V375
VI-26X
VI-J6X
85 – 264 Vac
+Out
Pok
E/O
A/S
-Out
+In
Gate In
Gate Out
-In
+Out
+S
T
-S
-Out
LOAD
Typical Configuration Not for design use; see data sheet for more information
General Performance Refer to data sheet for detailed specifications
Parameter Notes
AC line input 85 to 264 Vac No strapping
47 to 63 Hz No damage below low line
Output power Up to 675 W
Efficiency 92%
Power factor 0.99
Total harmonic distortion* <8.5%
Output ripple 7 Vp-p Cout = 1000 µF, 600 W
Inrush current 20 A peak No external circuitry
Hold-up capacitance 420 – 3,000 µF Power dependent
Isolation voltage
Input to output None Provided by DC-DC converters
Input / output to baseplate 1,500 Vrms
Auxiliary output 19 – 23 Vdc @ 2 mA
Thermal shut down 90 to 100°C baseplate
Short-circuit protection Yes
Weight 6 oz (170 g)
* With sinusoidal input voltage ITHD – VTHD = THD
Product Types
HAM = Driver HAM
HAMD = Driver HAM for
use with the BAMD
BAMD = Booster HAM
Family
VI = Non-RoHS
VE = RoHS
Output Power
M = 600 W
L = 675 W*
Product Grade
E = –10 to +85°C
C = –25 to +85°C
I = –40 to +85°C
M= –55 to +85°C
VI-HAM-CL
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
If power requirements exceed one HAM, use a HAMD and one or more BAMDs, with an external bridge rectifier. HAM,
HAMD, and BAMD modules require three surge suppressors in series directly across the input. These surge suppressors
are already contained in the EMI filter P/N 30205. Also, use a 10 A, 3AG fast-blow fuse ahead of the line filter.
Front-ends
ham
AC Input Harmonic Attenuator Module HAM
* Compatible with V375 Series
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
17
AC-DC Web ExpressCode:
The AIM (Alternating Input Module) is an AC front-end module which interfaces directly
with worldwide AC mains. The AIM provides line rectification, EMI / RFI filtering, transient
protection, and inrush limiting in a half-brick package measuring 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7 mm).
The AIM is used in conjunction with Vicor VI-200 or VI-J00 DC-DC converters to realize a
universal AC input, high density, low-profile switching power supply with outputs from
1 – 95 Vdc and a total power rating up to 200 W. An external capacitor is used to satisfy
system hold-up requirements. Internal EMI filtering meets EN55022 and FCC Part 15,
Class A emissions limits.
Features
Universal input: 85 to 264 Vac
Output power: 250 W
Operating temperature up to
100˚C baseplate (no derating)
Efficiency: 97%
Integral EMI filtering
Input transient protection
Inrush limiting
cULus, cTÜVus, CE Marked
General Performance Refer to data sheet for detailed specifications
Typical Configuration Not for design use; see data sheet for more information
85 – 264 Vac
VI-AIM
Gate Out
Parallel
Gate In
+Out
-Out
L2/N
N/C
N/C
L1
-Out
-S
Trim
+S
+Out
+In
Gate
In
Gate
Out
-In
Vicor DC-DC
Converter Load
Product Grade
E = –10°C to +85°C
C = –25°C to +85°C
I = –40°C to +85°C
M = –55°C to +85°C
AC Input Module
VI-AIM-E1
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
ProductFamily
VI = Non-RoHS
VE = RoHS
Parameter Notes
AC line input 85 to 264 Vac No strapping
47 to 440 Hz No damage below low line
Output power Up to 250 W
Efficiency 97%
Power factor 0.62
Inrush current <40 A peak No external circuitry
Hold-up capacitance 270 – 1,200 µF Power dependent
Isolation voltage
Input to output None Provided by DC-DC converters
Input / output to baseplate 1,500 Vrms
Short-circuit protection No
Weight 3 oz (85 g)
✩
✩
✩
MIL-COTS Version
Available – Page 25
Front-ends
aim
AC Input Module AIM
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
18
AC-DC Web
ExpressCode:
Web ExpressCode:
The ENMod system is an AC front-end solution for compliance to electromagnetic compatibility
(EMC) standards. It consists of the MiniHAM passive harmonic attenuation module and the
FARM3 autoranging AC-DC front-end module. Combined with filtering and hold-up capacitors,
the ENMod system provides full compliance to EN61000-3-2 Harmonic Current, EN55022,
Level B Conducted Emissions, EN61000-4-5 Surge Immunity, EN61000-4-11 Line Disturbances,
and EN61000-3-3 Inrush Current.
Unlike active PFC solutions, the MiniHAM generates no EMI, greatly simplifying
and reducing system noise filtering requirements. It is also smaller and more efficient
than active alternatives. Optimized for operation on the DC bus (provided by the FARM3)
rather than directly on the AC line, it will provide harmonic current compliance at
up to 600 W of input power at 230 Vac.
The FARM3 is a filter and autoranging module that has been optimized for use
as the front end for the MiniHAM. Both modules are in Vicor’s standard Mini
half-brick package.
Features
Passive harmonic current
attenuation to EN61000-3-2
575 W rated power output
Autoranging 115/230 Vac Input
Inrush current limiting
FARM3
N
SR
L
+
BOK
ST
EN
–
MINI
HAM
N/+
L/–
EMI GND
+In
PC (Gate In)
PR (Gate Out)
–In
+
–
Vicor 300 Vin
DC-DC
Converter
NC
NC
NC
NC
NC
N/+
L/–
Load
Typical Configuration Not for design use; see data sheet for more information
General Performance Refer to data sheet for detailed specifications
Parameter Notes
Operating input voltage 90 – 132 Vac Autoranging (doubler-mode)
180 – 264 Vac Autoranging (bridge-mode)
Output power (max) 575 Watts
Harmonic currents EN61000-3-2 50 – 600 W, 230 Vac input
Transient surge immunity EN61000-4-5 2 kV – 50 µs line to earth
1 kV – 50 µs line to line
Conducted emissions EN55022, Class B
Safety EN60950
Dimensions
MiniHAM 2.28" x 2.2" x 0.5” (57,9 x 55,9 x 12,7 mm)
FARM3 2.28" x 2.2" x 0.5” (57,9 x 55,9 x 12,7 mm)
EN1 C 1 1
Product Type* Product Grade (°C)
E = –10 to +100
C = –20 to +100
T = –40 to +100***
H = –40 to +100***
Pin Style**
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Baseplate
1 = Slotted
2 = Threaded
3 = Thru hole
* EN1 product includes one each MiniHAM and FARM3, same product grade, pin and baseplate style.
** Pin styles S & N are compatible with ModuMate interconnect systems for socketing and surface mounting.
*** T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
Front-ends
enmods
Modular AC Front-end System ENMods
Features
Efficiency: 96 – 98%
Operating temperature
up to 100˚C baseplate (no derating)
Agency approvals: cTÜVus, cULus, CE Marked
AC Bus OK, module enable
Inrush limiting (no external circuitry)
Autoranging input: 90 – 132 / 180 – 264 Vac
Web
ExpressCode:
farm
The Autoranging Rectifier Module (ARM) is the front end of a switching power supply
and uses a microprocessor to control strapping of the voltage doubler. The user only
needs to add an input filter, hold-up capacitor and appropriate DC-DC converters to
realize an autoranging, high-density, low-profile switching power supply.
The FARM (Filter / Autoranging Rectifier Module) is an AC front-end
module which provides EMI filtering, autoranging line rectification,
transient protection, and inrush current limiting.
Filter/Autoranging Rectifier Module FARM
VI-ARM-C12
Type
1 = 500 W / 750 W
2 = 1,000 W / 1,500 W
Product Grade
E = –10 to +100°C
C = –20 to +100°C
T = –40 to +100°C*
H = –40 to +100°C*
M = –55 to +100°C
Product Pin Style
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
General Performance for ARM & FARM Refer to data sheet for detailed specifications
Parameter ARM -( )12 ARM -( )22 FARM1( )21 FARM2( )21
Input voltage 90 – 132 Vac 90 – 132 Vac
180 – 264 Vac 180 – 264 Vac
Input frequency (C-Grade) 47 – 63 Hz 47 – 63 Hz
Input frequency (T-Grade) 47 – 880 Hz 47 – 880 Hz
Output power
115 Vac input 500 Watts 1,000 Watts 500 Watts 750 Watts
230 Vac input 750 Watts 1,500 Watts 750 Watts 1,000 Watts
Compatible DC-DC converter 26x, J6x, V300 26x, J6x, V300
Efficiency (typical) 97% 96%
Inrush current (peak line. Cold start) <30 A @ 264 Vac <60 A @264 Vac <30 A @ 264 Vac <60 A @264 Vac
Dielectric withstand: Input / output Provided by DC-DC converters Provided by DC-DC converters
I/O to baseplate 1,500 Vrms 1,500 Vrms
Package Micro Mini
Inches (mm) 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm)
Operating temperature (C-Grade) –20 to +100°C –20 to +100°C
Operating temperature (T-Grade) – 40 to +100°C –40 to +100°C
Weight 2.1 oz (60 g) 3.1 oz (87.9 g)
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
FARM-1C11
Type
1 = 500 W / 750 W
2 = 750 W / 1,000 W
Product Grade
E = –10 to +100°C
C = –20 to +100°C
T = –40 to +100°C*
H = –40 to +100°C*
M = –55 to +100°C
Product Pin Style
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Baseplate
1 = Slotted
2 = Threaded
3 = Thru hole
Autoranging Rectifier Module ARM
* T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
* T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
19
AC-DC Web ExpressCode:
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
20
DC-DC Web ExpressCode:
The QPI family of active EMI filters provides conducted common-mode (CM) and
differential-mode (DM) attenuation from 150 kHz to 30 MHz (CISPR22 range). The
proprietary active filtering circuit provides superior attenuation at low frequencies
intended to support EN Class B limits, including PICMG®3.0 for ATCA.
Models QPI-3 through QPI-8 are designed to work with most switch-mode power
supplies. The QPI-9 through QPI-12 products are designed specifically for use with
Vicor’s V•I Chip power conversion products.
Full-size QPI models are 25 x 25 x 4,5 mm SiP (System-in-Package), with LGA
mounting. QPI-11 and QPI-12 are half size 12,5 x 25 x 4,5 mm SiPs.
Features
Up to 60 dB CM attenuation at 250 kHz
Up to 80 dB DM attenuation at 250 kHz
Efficiency: >99% at full load
Surface-mount LGA package
Integrated hot-swap in selected models
Supports PICMG®3.0 ATCA requirements
10 Ω, 1/4 W
CR
Part Numbering
Typical Configuration Not for design use; see data sheet Performance
Part Number Input Nominal Current CM Attenuation DM Attenuation Hipot Hot-Swap
(Z = RoHS) Voltage Range Rating @ 250 kHz @ 250 kHz
QPI-3L( Z) 24/28 Vdc 10 – 40 Vdc 7 A 60 dB 80 dB 707 Vdc N/A
QPI-4L( Z) 48/60 Vdc 30 – 80 Vdc 7 A 40 dB 70 dB 1,500 Vdc N/A
QPI-5L( Z) 24/28 Vdc 10 – 40 Vdc 14 A 60 dB 80 dB 707 Vdc N/A
QPI-6L( Z) 48/60 Vdc 30 – 80 Vdc 14 A 40 dB 80 dB 1,500 Vdc N/A
QPI-7L( Z) 24/28 Vdc 18 – 38 Vdc 6 A 50 dB 80 dB 707 Vdc Yes
QPI-8L( Z) 48/60 Vdc 32 – 76 Vdc 6 A 40 dB 70 dB 1,500 Vdc Yes
V•I Chip Specific Models @ 1 MHz @ 1 MHz
QPI-9L( Z) 24/28 Vdc 18 – 38 Vdc 6 A 65 dB 80 dB 707 Vdc Yes
QPI-10L( Z) 48/60 Vdc 32 – 76 Vdc 6 A 45 dB 70 dB 1,500 Vdc Yes
QPI-11L( Z) 24/28 Vdc 5 – 50 Vdc 7 A* 65 dB 80 dB 707 Vdc N/A
QPI-12L( Z) 48/60 Vdc 10 – 80 Vdc 7 A* 45 dB 70 dB 1,500 Vdc N/A
Patents Pending
Conducted EMI scans showing QPI performance.
Blue trace = no QPI; Red trace = with QPI.
Models QPI-3 through QPI-8
QPI Evaluation Boards
Available
For more information,
go to picorpower.com
QuietPowerTM
Qpi
* Parallelable for up to 14 A.
Active EMI Filters QPI-3L through QPI-12L
EN 55022B
Web ExpressCode: Qpo
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
21
DC-DC
polc
The QPO output ripple attenuator SiP (System-in-Package) products use proprietary active filtering
to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 kHz. QPOs
improve transient response and ensure quiet point-of-load regulation. They also reduce the
number of output capacitors to support dynamic loads. QPOs work with most DC-DC converters
and switching power supplies. Output regulation is maintained using remote sensing or the trim
input of the power supply.
Features
>30 dB PARD attenuation, 1 kHz to 500 kHz
25 x 25 x 4,5 mm SiP, LGA mounting
Supports precise point-of-load regulation
Reduces required number of output capacitors to
support dynamic loads
User selectable optimization of attenuation,
power dissipation, and transient load response
Compatible with most DC-DC converters
Features
0.5% initial output voltage accuracy
Remote differential output voltage sense
6 Bit DAC, with 12.5 mV resolution
5 to 12 V operation
Power good output with blanking
Programmable adaptive voltage positioning (AVP)
24 pin, 4 x 4 mm QFN
Part Numbering
Part Number (Z = RoHS) Description
QPO-1L(Z) 3 – 30 Vdc input, 10 A, > 30 dB PARD attenuation, 1 kHz to 500 kHz
QPO-2L(Z) 0.5 – 5.5 Vdc input, 20 A, > 20 dB PARD attenuation, 1 kHz to 500 kHz, Aux. Bus biased
RHR
SC SET
CESR
QPO OUT
VREF
GND
SC
QPO IN
REFGND
QPO-1
Cout
Rsc
CSC
VOUT+
VOUT-
SENSE+
SENSE-
SC
LOAD+
LOAD-
RSL
Typical Application Performance
QPO IN (AC)
QPO OUT (AC)
LOAD CURRENT
(DC) 5A/DIV
Picor’s PI1004 combines a VID-controlled reference with control and supervisory functions to accurately
set the regulator output voltage at the point of load for isolated and CPU DC-DC converters in desktop
and server applications. The PI1004 feature set is intended to be used in conjunction with a variety of
power architectures, including Factorized Power Architecture (FPA), to provide CPU power in accordance
with Intel®VR10.X requirements. The PI1004 is available in two options, PI1004-1: Programmable VID
offset current and no OVP output. PI1004-2: OVP output and no VID offset.
Programmable POL Controller PI1004-X
QPO Evaluation Boards
Available
For more information,
go to picorpower.com
QuietPowerTM
Output Ripple Attenuator QPO-1L / QPO-2L
Patents Pending
iam
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
22
DC-DC Web ExpressCode:
A DC input, front-end module providing transient protection, inrush current limiting
and EMI filtering. The FIAM enables designers using Vicor Maxi, Mini, and Micro 48 Vin
DC-DC converters to meet the transient immunity and EMI requirements of Telcordia,
FCC, ETSI and European Norms.
Features
EMI filtering - Class A
Inrush current limiting
Transient protection
36 – 76 Vdc input
10 and 20 Amp versions
Agency approvals: cULus, cTÜVus, CE Marked
General Performance Not for design use; see data sheet
Filter Input Attenuator Module FIAM
Maxi, Mini and Micro Series /
VI-200 and J00 Series
DC-DC Converters
FIAM /
IAM
–IN
+IN
–OUT
–S
+S
+OUT
–IN
+IN
Load
FIAM- 1 C 11
Type
1 = 10 A
2 = 20 A
Product Grade
C = –20 to +100°C
T = –40 to +100°C*
H = –40 to +100°C*
Product Pin Style
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Baseplate
1 = Slotted
2 = Threaded
3 = Thru hole
Parameter
Input voltage 36 to 76 Vdc
Output current
FIAM1xxx / FIAM2xxx 10 A / 20 A
Inrush limiting 0.014 Amp/µF
EMI / RFI Telcordia GR-1089-Core Issue 2,
EN55022, Class A, FCC Part 15, Class B
Transient immunity Telcordia GR-499-Core, Section 13-2,
ETS 300 386-1, Class 2
Mini package size 2.28" x 2.2" x 0.5"
(57,9 x 55,9 x 12,7 mm)
✩
✩
✩
Defense / MIL-COTS
Version – Page 26
✩
✩
✩
Defense / MIL-COTS
Version – Page 26
Filters
fiam
* T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
The IAM provides EMI filtering and transient protection for industrial and
communications applications, using VI-200 and VI-J00 Series modules.
Input Attenuator Module IAM
Features
Meets Telcordia & British Telecom standards for EMI/RFI
Meets Telcordia, IEC and British Telecom standards for transients
Agency approvals: cULus, cTÜVus, CE Marked
Efficiency: 97%
Input reverse polarity protection
Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm)
IAM Models and General Performance Typical Configuration Output response to an input transient
Model Min. Typ. Max. Power
VI-A11-CU 21 Vdc 24 Vdc 32 Vdc 200 W
VI-AWW-CU 18 Vdc 24 Vdc 36 Vdc 200 W
VI-A33-CQ 42 Vdc 48 Vdc 60 Vdc 400 W
VI-ANN-CQ 36 Vdc 48 Vdc 76 Vdc 400 W
VI-A66-CQ 200 Vdc 300 Vdc 400 Vdc 400 W
RoHS compliant versions begin with “VE-”. For example: VE-A33-CQ Block diagram for either FIAM and IAM modules,
see product specific data sheet for connection diagram
Features
Integrated OR’ing diode supports N+1 redundancy
>40 dB ripple attenuation from 60 Hz to 1 MHz
Significantly improves load transient response
Reduces ripple to less than 10 mV peak to peak
Efficiency: Up to 98%
20 and 30 Amp ratings
3 – 30 Vdc input range
Dimensions: 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm)
Compatible with Vicor’s DC-DC converters
uram
Output Ripple Attenuator Module MicroRAM
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
23
DC-DC Web ExpressCode:
Combining active and passive filtering, the RAM attenuates both low-frequency
input power source fundamental and harmonics, and high-frequency switching
components in the frequency range of DC to 20 MHz, while exhibiting
efficiencies of 93 – 99%. No adjustments are required, and remote sense and
output voltage trim features are retained.
Features
Reduces output ripple to <3 mV pp (VI-200)
Compatible with any VI-200 / VI-J00 based product: 5 to 50 Vdc output
Full attenuation up to 20 A
No adjustments required
Efficiency: 93 – 99%
Converter sense, trim, overvoltage, and overcurrent retained
Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm)
CE Marked
Combines both active and passive filtering to achieve greater
than 40 dB of noise attenuation from 60 Hz to 1 MHz.
VI-200
+ Out
– Out
– S
+ S
+ In
– In
Trim
+ In
– In
+ Out
– Out
+ S Out
+ S In
– S Out
– S In
N/C
VI-RAM Load
Gate In
Gate Out
Typical Configuration Not for design use; see data sheet
Typical Configuration Not for design use; see data sheet
Input to VI-RAM Low Noise Output
Pin Style
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Baseplate
1 = Slotted
2 = Threaded
3 = Thru hole
DC-DC
Converter
+Out
VREF
–Out
+In
SC
CTRAN
–In
+Out
+S
SC
–S
–Out
+In
PC
PR
–In
RSENSE
5.1
22 μF
CTRAN*
*Optional Component
RHR
CHR*
LOAD
Ripple Attenuator Module RAM
µRAM-2C21
Product
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Product Grade (°C)
C = –20 to +100
T = – 40 to +100*
H = – 40 to +100*
M = –55 to +100
Type
2 = 20 Amps
3 = 30 Amps
VI - RAM - C2
Product
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Product Grade
E = –10 to +100°C
C = –25 to +100°C
I = –40 to +100°C
M = –55 to +100°C
Type
1 = Up to 10 Amps
2 = Up to 20 Amps
✩
✩
✩
MIL-COTS Version
Available – Page 26
Filters
ram
Family
VI = Non-RoHS
VE = RoHS
* T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
milcat
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
24
MIL-COTS Web ExpressCode:
Voltage Transformation Modules (VTMs) put isolated current multiplication and
voltage division directly at the point of load (POL), and an upstream Pre–Regulator
Module (PRM) controls the factorized bus voltage supplied to the VTM to provide
line and load regulation. Together, the PRM and VTM chip set provides the full
functionality of a DC-DC converter, but with breakthrough performance and
flexibility in a rugged, miniature package.
The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting
many of the ground vehicle and airborne requirements of MIL–STD–1275 and
MIL–STD–704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus
voltage of 36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream
isolated VTM is available with twelve voltage division ratios from 1:1 to 1:32 and
provides the user with flexibility to supply up to 100 A or 120 W at any output
voltage from 1 to 50 Vdc in a surface-mount package occupying only 1 in2.
28 V DC-DC V•I Chip Modules Pre-Regulator Modules and Voltage Transformation Modules
16 – 50 Vdc input range
1.3 MHz switching frequency
Efficiency: 95%
–55°C to 125°C operation
ZVS buck-boost regulator
Isolated 1–50 Vdc output
1 µs transient response
3 MHz switching frequency
Efficiency: Up to 96.5%
–55 to 125°C operation
Features for PRM Features for VTM
©©
V•I Chips
MIL-COTS Product Catalog Designing with Component Power
This document provides information on Vicor's line of MIL-COTS standard products,
including DC-DC converters, custom solutions, and technical support.
Includes complete information on these and other products.
Visit vicorpower.com and enter
'milcat' in the Web ExpressCode box.
Environmental stress screening and MTBF
Environmental qualification
Custom configured modules
Field tested... proven reliability
mvichips
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
25
MIL-COTS Web ExpressCode:
mbricks1
Vicor’s field-proven MIL-COTS power components have gained a
reputation for quality and reliability among military power system
designers. With thousands of standard models available, designers
can rapidly meet performance, schedule, and budget objectives for
just about any power solution.
These high-density DC-DC power converters are available in three rugged packages with
output power up to 600 W. Standard inputs of 24, 48, 300, and 375 Vdc; and outputs from
1 to 48 Vdc, make these converters extremely flexible for MIL-COTS applications.
DC-DC Converter Modules Maxi, Mini and Micro Series
Features
24, 48, 300, and 375 Vdc inputs
Two operating temperature ratings:
–40 to +100°C and –55 to +100°C
MIL-STD-810 and MIL-STD-202 qualified
Environmental stress screening
Final test data available at
vicorpower.com
Bricks / Front end
DC-DC Converter Modules MI-200 and MI-J00 Series
maim
The MI-AIM works in conjunction with Vicor’s MI-x7x module family and is ideal
for systems requiring AC rectification and transient protection.
Features
115 Vac nom, 60/400 Hz operation
MIL-STD-461D EMI (CE102) @ 60 Hz
MIL-STD-704A transient protection
MIL-STD-810 and MIL-STD-202 qualified
AC Front-end Module MI-AIM
Features
28 and 270 Vdc inputs per MIL-STD-704D/E/F
155 Vdc input per MIL-STD-1399A
Output voltages from 2 – 48 Vdc
10 to 100 W output power
MIL-STD-810 and MIL STD-202 qualified
NAVMAT component derating guidelines
Up to 25 W/in3power density
75 and 100 W booster modules available
mbricks2
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
26
MIL-COTS Web ExpressCode:
mfiam
The M-FIAM is a DC front-end module that provides EMI filtering and transient
protection. The M-FIAM enables designers using Vicor 24 and 300 V Maxi, Mini and
Micro DC-DC converters to meet conducted emission / conducted susceptibility per
MIL-STD-461E; and input transients per MIL-STD-704E/F.
Features
MIL-STD-461E conducted emissions / susceptibility
MIL-STD-704E/F transient protection
MIL-STD-810 and MIL-STD-202 qualified
Compatible with 24 and 300 Vdc input
Maxi, Mini and Micro DC-DC converters
Filter Input Attenuator Module M-FIAM
miam
The MI-IAM provides EMI filtering to MIL-STD-461C/D/E and transient protection to
the most severe levels of MIL-STD-704A and MIL-STD-1275A/B, using MI-200 or
MI-J00 modules.
Features
28 and 270 Vdc per MIL-STD-704A and MIL-STD-1275A/B
MIL-STD-461C/D/E conducted emissions / susceptibility
MIL-STD-810 and MIL-STD-202 qualified
Compatible with MI-200 and MI-J00
Input Attenuator Module MI-IAM
Vicor’s MicroRAM output ripple attenuation module combines both active and passive
filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz. The
MicroRAM operates over a range of 3 to 30 Vdc, is available in either 20 or 30 A
models, and is compatible with all Vicor DC-DC converters.
Output Ripple Attenuator Module MicroRAM
Features
>40 dB ripple attenuation from 60 Hz to 1 MHz
20 and 30 Amp ratings
Operation: –55°C
3 – 30 Vdc input
Filters
muram
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
27
MIL-COTS Web ExpressCode:
mcompac
mvipac
The MI-ComPAC is a complete single, dual, or triple output DC-DC power
supply that delivers up to 300 W from inputs of 28 or 270 Vdc.
DC Power Supply MI-ComPAC
VIPAC Arrays are a highly flexible 24 and 300 Vdc input power system that can be configured
with up to four user-defined outputs, with power capability, up to 750 W.
Chassis Mount DC-DC Converter VIPAC Arrays
Features
24 and 300 Vdc inputs
–55°C operation
Rugged, low profile, coldplate chassis
Configurable multi outputs up to 750 W
Configure your
MIL-COTS VIPAC Arrays online at
vicorpower.com/vcad
Configurables
DC input power converters delivering up to 300 W from one, two, or
three outputs in a package just 0.62" in height.
Chassis-Mount DC-DC Converter MI-MegaMod Family
Features
Standard inputs of 28, 155, and 270 Vdc
Output voltages from 2 – 48 Vdc
Up to 13.5 W/in3
1, 2 or 3 outputs, up to 300 W
Features
Complete single, dual, or triple output
power supply 50 – 300 W
MIL-STD-704A and MIL-STD-1275A/B compatible
MIL-STD-461C/D/E conducted emissions / susceptibility
Conduction-cooled models available
mmega
AC-DC
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
28
DC-DC Web ExpressCode:
AC input: 115/230 Vac autoranging,
47 – 440 Hz
DC input: 48 Vdc
Output voltages: 2 – 48 Vdc
50 – 900 Watts total;
1, 2, or 3 outputs
Protective features:
Inrush current limiting
Input transient protection
EMI filtering
Choice of output terminations:
LugMate or PlugMate
Local or remote control
Package style:
Low-profile coldplate
Optional finned heat sink
Agency approvals:
cULus, cTÜVus, CE Marked
Vicor’s VIPAC is an integrated power system leveraging the latest advances
in DC-DC converter technology and modular front ends. VIPAC combines
application-specific power processing units (PPU), a choice of chassis styles
and, in AC input versions, remotely located hold-up capacitors to provide
fast, flexible, and highly reliable power solutions for a wide range of
demanding applications.
The PPU is the core element of the system and may be specified for
operation from 48 Vdc or 115/230 Vac. The PPU incorporates Vicor’s FIAM
(for DC input) or autoranging FARM (for AC input) modular front end to
provide transient protection, EMI filtering, and inrush current limiting. The
web-based VIPAC Design Center enables designers to configure the PPU
with up to three independently regulated outputs having power levels from
50 to 500 W and with as much as 900 W total output power.
Features
Chassis Configurations Dimensions vary with specific model configurations
AC-DC or DC-DC Configurable Power Supply VIPAC Power System
A
3 Micros
4.96" x 6.8"
(126,0 x 172,7 mm)
Dual or triple output
Up to 450 W
B
2 Minis
4.96" x 6.8"
(126,0 x 172,7 mm)
Single or dual output
Up to 500 W
C
2 Maxis
4.96" x 9.15"
(126,0 x 232,4 mm)
Single or dual output
Up to 900 W
D
2 Micros
3.15" x 6.8"
(80,0 x 172,7 mm)
Single or dual output
Up to 300 W
E
1 Mini
3.15" x 6.8"
(80,0 x 172,7 mm)
Single output
Up to 250 W
F
1 Maxi
3.15" x 9.15"
(80,0 x 232,4 mm)
Single output
Up to 500 W
G
1 Micro
3.15" x 6.8"
(80,0 x 172,7 mm)
Single output
Up to 150 W
Configurables
vipac
RoHS-compliant versions can be
selected with the VIPAC Design Tool.
Configure your
VIPAC Power System
online at
vicorpower.com/vcad
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
29
DC-DC Web ExpressCode:
Web ExpressCode:
VIPAC Arrays are a highly flexible system of DC input, power building blocks that
can be configured with as many as four user-definable outputs on a low-profile,
coldplate chassis. Using Vicor’s VCAD design tool (vicorpower.com/vcad),
designers are able to specify VIPAC Arrays with inputs of 24, 48, 300, or 375
Vdc and outputs from 2 to 48 Vdc at power levels up to 600 Watts per output.
VIPAC Arrays are ideal for use in distributed and modular power systems where
power density and reliable operation are critical. A current share option is
available on single output models enabling them to be used in applications
requiring high power / redundancy. Fully connectorized input and output
terminations speed system installation and a versatile coldplate chassis simplifies
thermal management.
Features
Input voltage: 24, 48, 300 or 375 V
Booster versions for higher
output current applications
Agency approvals:
cULus, cTÜVus, CE Marked
Dimensions:
4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm)
Chassis Configurations Dimensions vary with specific model configurations
DC Input Power System •1 – 4 Outputs VIPAC Arrays
A
2 Minis
Single or dual outputs
3.62" x 6.69"
(92,0 x 170,0 mm)
Up to 600 W total
B
1 Mini, 2 Micros
Single, dual or triple
outputs
Up to 600 W total
3.62" x 6.69"
(92,0 x 170,0 mm)
C
3 Micros
Dual or triple outputs
Up to 450 W total
3.62" x 6.69"
(92,0 x 170,0 mm)
D
1 Maxi
Single output
Up to 600 W
Current share option
3.62" x 6.69"
(92,0 x 170,0 mm)
E
1 Micro, 2 Minis
Dual or triple outputs
Up to 750 W total
3.62" x 7.52"
(92,0 x 191,0 mm)
F
4 Micros
Dual, triple or quad
outputs
Up to 600 W total
3.62" x 7.52"
(92,0 x 191,0 mm)
G
1 Mini
Single output
Up to 300 W
Current share option
3.62" x 4.39"
(92,0 x 112,0 mm)
H
2 Micros
Single or dual outputs
Up to 300 W total
3.62" x 4.39"
(92,0 x 112,0 mm)
Configurables
vipacarray
RoHS-compliant versions can be
selected with the VIPAC Design Tool.
Configure your
VIPAC Array online at
vicorpower.com/vcad
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
30
AC-DC Web ExpressCode:
Microprocessor-controlled front end
Inputs: 115/230 Vac, autoranging
FCC Part 15, Class B,
EN55022, Class B
40 ms hold up
Agency approvals:
cULus, cTÜVus, CE Marked
Module disable
BUS OK and AC OK
Finned or conduction-cooled package
22 Standard output voltages
from 1 – 95 Vdc
Low-noise ZCS / ZVS power topology
Transient surge: EN61000-4-5
Conduction-cooled models available
Low profile only 1.37” (34,7 mm)
Custom output voltages also available
BatMod current-source
option available
The FlatPAC is a complete, low-profile, agency-approved switching
power supply. It combines Vicor’s VI-200 Series of DC-DC converters
and front-end subassemblies to provide from 50 to 600 W of output
power from one to three outputs.
The FlatPAC design provides rapid turnaround on standard models.
FlatPAC is available with BatMod current source module, see p.12.
Features
50 – 600 Watt AC-DC Power System FlatPAC Family
General Performance Refer to data sheet for detailed specifications
Parameter
Number of outputs 1 to 3
Output power Up to 600 W
Input voltage 90 – 132 Vac / 180 – 264 Vac
47 – 63 Hz (400 Hz available; contact factory)
Conducted EMI EN/FCC “B”
Set point ±1% max. (E-Grade 2%)
Load / line regulation 0.2% max. (E-Grade 0.5%)
Output ripple (pp) 150 mV or 3% max. (E-Grade 5%)
Trim range* 50 – 110%
Remote sense range 0.5 Vdc max.
OVP set point 125% typical
Current limit 115%
Maximum temperature 0 to 85°C baseplate
*10, 12 and 15 V outputs, standard trim range ± 10%. Consult factory for wider trim range.
Chassis Configurations
OUTPUT 1
Single output
50 – 200 Watts
9.25” x 2.5” x 1.37”
(234,8 x 63,5 x 34,8 mm)
OUTPUT 1 OUTPUT 1
12
Single or dual outputs
100 – 400 Watts
9.25” x 4.9” x 1.37”
(234,8 x 124,5 x 34,8 mm)
Single, dual
or triple outputs
150 – 600 Watts
9.25” x 7.3” x 1.37”
(234,8 x 185,4 x 34,8 mm)
Configure a FlatPAC
Part Number
see page 33
Configurables
flatpac
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
31
DC-DC Web ExpressCode:
Web ExpressCode:
✩
Inputs: 24, 48, and 300 Vdc
Any output: 1 to 95 Vdc
Agency approvals:
cULus, cTÜVus, CE Marked
Efficiency: 80 – 90%
Up to 10 W/in3
EMI / RFI specifications:
Telcordia TR-TSY-000513,
British Telecom BTR 2511
EN55022, Class B:
Conducted emissions
Input surge withstand:
British Telecom BTR 2511,
EN61000-4-5
Low-noise ZCS / ZVS power topology
Conduction-cooled models available
Optional high-performance heat sink
ComPAC delivers up to 600 W from one, two, or three outputs in a package
just 0.99” (25,2 mm) in height with the field proven performance, high
efficiency and high reliability inherent in Vicor’s component level power
converters. ComPAC meets British telecom and European norms for input
surge withstand and meets conducted emissions of EN55022, Class B.
ComPAC is offered with input voltage ranges optimized for industrial and
telecommunication applications and provides extended input overvoltage
capability, input reverse polarity protection, undervoltage lockout, and master
disable. ComPAC is available with BatMod current source module, see p.12.
Features
✩
✩
MIL-COTS Version
Available – Page 27
50 – 600 Watt DC Input Power System ComPAC Family
Parameter Rating Unit
18 – 36 Vdc
21 – 32 Vdc
Input voltage range 42 – 60 Vdc
36 – 76 Vdc
200 – 400 Vdc
Outputs 1, 2 or 3
Output power 50 – 600 Watts
Output voltage(s) 1 – 95 Vdc
Operating temperature (case)
E-Grade –10 to +85 ˚C
C-Grade –25 to +85 ˚C
I-Grade –40 to +85 ˚C
M-Grade –55 to +85 ˚C
General Performance Refer to data sheet for detailed specifications
Chassis Configurations
12
OUTPUT 1
Single output
50 – 200 Watts
9.25” x 2.5” x 0.99”
(234,8 x 63,5 x 25,2 mm)
12
OUTPUT 1
12
OUTPUT 1
Single or dual outputs
100 – 400 Watts
9.25” x 4.9” x 0.99”
(234,8 x 124,5 x 25,2 mm)
Single, dual, or
triple outputs
150 – 600 Watts
9.25” x 7.3” x 0.99”
(234,8 x 185,4 x 25,2 mm)
Conduction-cooled
ComPAC models available
Configure a ComPAC
Part Number
see page 33
Configurables
compac
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
32
Web ExpressCode:
DC-DC Web ExpressCode:
Input Selection Package Output Power
12
24
36
48
72
110
150
300
150/300
✩
Inputs: 10 to 400 Vdc
Any output: 1 to 95 Vdc
Agency approvals:
cULus, cTÜVus, CE Marked
Efficiency: 80 – 90% (typical)
Up to 27 W/in3
Low profile: 0.62" high
Low noise ZCS / ZVS power topology
Temperature grades (MegaMod Jr.):
E = –10 to 85°C (100°C)
C = –25 to 85°C (100°C)
I = –40 to 85°C (100°C)
M = –55 to 85°C (100°C)
ZCS power architecture
Booster versions available for expanded
output power (MegaMod only)
MegaMod and MegaMod Jr. DC-DC converters incorporate one, two, or three
Vicor VI-200 or VI-J00 MiniMod converters in a modular package to provide a
chassis-mounted alternative to board-mounted power supplies. MegaMods
offer 50 – 600 W of power from 1 – 3 outputs. MegaMod Jrs offer a total of
25 – 300 W from 1 – 3 outputs. Each output may be independently sensed,
adjusted, and sequenced using the procedures outlined for VI-200 and VI-J00
converters in the Vicor Applications Manual. Download a PDF of the manual
from the library section of vicorpower.com.
Features
✩
✩
MIL-COTS Version
Available – Page 27
Chassis-Mount VI-200 / VI-J00 Converters Full and Half-sized MegaMods
Chassis Configurations
DC-DC Converter
MegaMod
4.9'' (124,4 mm)
MegaMod Jr.
2.58'' (35,5 mm)
S/N
MODEL
INPUT
OUTPUT
S/N
MODEL
INPUT
OUTPUT
MegaMOD Jr. MegaMOD Jr.
S/N
MODEL
INPUT
OUTPUT
MegaMOD Jr.
MegaMOD
TM
DC-DC Converter
MegaMOD
TM
DC-DC Converter
MegaMOD
TM
2.5''
(63,5 mm)
4.9''
(124,4 mm)
7.3''
(185,4 mm)
Single output
50 – 200 Watts — MegaMod
25 – 100 Watts — MegaMod Jr.
Single or dual outputs
100 – 400 Watts — MegaMod
50 – 200 Watts — MegaMod Jr.
Single, dual or triple outputs
100 – 600 Watts — MegaMod
75 – 300 Watts — MegaMod Jr.
Configure a MegaMod
Part Number
see page 33
Configurables
megamod
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
33
Family Total Number Modules Per Output
Style Module Internal Modules OUT 1 OUT 2 OUT 3
Single outputs: L VI-200 1 1 – –
LJ VI-J00 1 1 – –
M VI-200 2 2 – –
N VI-200 3 3 – –
Dual outputs: P VI-200 2 1 1 –
PJ VI-J00 2 1 1 –
Q VI-200 3 2 1 –
Triple outputs: R VI-200 3 1 1 1
RJ VI-J00 3 1 1 1
Output Configurations for FlatPACs, ComPACs and MegaMods
Part Number Configuration Chart For FlatPAC Family, ComPAC Family, and MegaMod Family
VI-M U 3 -C Q
Input
U = Autoranging
90 – 132 and
180 – 264 Vac
Out 1
Z = 2 V
Y = 3.3 V
0 = 5 V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
Out 2*
M = 10 V
1 = 12 V
P = 13.8 V
2 = 15 V
N = 18.5 V
3 = 24 V
L = 28 V
J = 36 V
Out 3**
K = 40 V
4 = 48 V
H = 52 V
F = 72 V
D = 85 V
B = 95 V
Grade
E = 0°C
C = 0°C
I = –30°C
Power 1
M = 600 V
P = 450 V
Q = 400 V
S = 300 V
U = 200 V
V = 150 V
W = 100 V
X = 75 V
Y = 50 V
Power 2*
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Power 3**
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Family
L = Single
M = Single
N = Single
P = Dual
Q = Dual
R = Triple
FlatPAC Family Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
All voltages available for output 1, 2, or 3
The chart to the left shows the number of modules
per output for MegaMod product families. Refer
to Chart A, on page 11, for a complete listing of
available output voltages and to determine the
maximum output power available for each
internal module, with your specific input / output
voltage combination.
If your power requirements exceed the limits shown
here, call Vicor Express or your local Vicor office for
information regarding booster versions. See back
cover for all telephone numbers.
VI-NC3 4 -C M
Input
1 = 24 V***
W = 24 V
3 = 48 V
N = 48 V
6 = 300 V
Out 1
Z = 2 V
Y = 3.3 V
0 = 5 V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
Out 2*
M = 10 V
1 = 12 V
P = 13.8 V
2 = 15 V
N = 18.5 V
3 = 24 V
L = 28 V
J = 36 V
Out 3**
K = 40 V
4 = 48 V
H = 52 V
F = 72 V
D = 85 V
B = 95 V
Grade
E = –10°C
C = –25°C
I = –40°C
M= –55°C
Power 1
M = 600 V
P = 450 V
Q = 400 V
S = 300 V
U = 200 V
V = 150 V
W = 100 V
X = 75 V
Y = 50 V
Power 2*
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Power 3**
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Family
L = Single
M = Single
N = Single
P = Dual
Q = Dual
R = Triple
ComPAC Family Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
All voltages available for output 1, 2, or 3
VI- L 1 3 -E V
Input
0 = 12 V
1 = 24 V***
W = 24 V
2 = 36 V
3 = 48 V
N = 48 V
4 = 72 V
T = 110 V
5 = 150 V
6 = 300 V
7 = 150 / 300 V
Out 1
Z = 2 V
Y = 3.3 V
0 = 5 V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
Out 2*
M = 10 V
1 = 12 V
P = 13.8 V
2 = 15 V
N = 18.5 V
3 = 24 V
L = 28 V
J = 36 V
Out 3**
K = 40 V
4 = 48 V
H = 52 V
F = 72 V
D = 85 V
B = 95 V
Grade
E = –10°C
C = –25°C
I = –40°C
M= –55°C
Power 1
M = 600 V
P = 450 V
Q = 400 V
S = 300 V
U = 200 V
V = 150 V
W = 100 V
X = 75 V
Y = 50 V
Z = 25 V
Power 2*
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Z = 25 V
Power 3**
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Z = 25 V
Family
L = Single
M = Single
N = Single
P = Dual
Q = Dual
R = Triple
L J = Single
PJ = Dual
RJ = Triple
MegaMod Part Numbering
Some output voltages and power combinations are not available for a given input voltage. Always check with the factory to verify your part number.
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
All voltages available for output 1, 2, or 3
* For P, Q, R, PJ, and RJ only. Refer to output configuration chart above.
** For R and RJ only. Refer to output configuration chart above.
*** Max output power / module 150 W.
For conduction-cooled package add –CC to the part number. For example, VI–LU0–CV –CC.
For conduction-cooled package add –CC to the part number. For example, VI–LWX–CV–CC.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
34
AC-DC Web ExpressCode:
The PFC FrontEnd is low-profile, 1 RU enclosed chassis-mount AC front end that
may be used with any 375 Vin Vicor module, VIPAC Array, or other module to
create a complete, high-density AC-DC power supply. Accepting universal input
voltages of 85 to 264 Vac, and 100 to 385 Vdc, the PFC FrontEnd can deliver up to
2,200 Watts from four non-isolated outputs. With an extremely compact package
size of 1.72" x 6.4" x 7" (43,6 x 162,6 x 177,8 mm), the PFC FrontEnd can
provide >28 W/in3.
Besides meeting the cTÜVus and CE Marked safety agency approvals, the PFC
FrontEnd complies with harmonic current limits per EN61000-3-2, Electrical Fast
Transient / burst EN61000-4-5. It also meets MIL-STD-810E for vibration.
375 V Output FrontEnd PFC FrontEnd*
Power Factor Corrected (PFC)
Low profile 1.72" (43,6)
Output power up to 2,200 Watts
Power density
Up to four 375 Vdc
non-isolated outputs
Integral cooling fans
Meets MIL-STD-810E for vibration
DIN rail mountable
Safety agency approvals:
cTÜVus, CE Marked
Features
Product Size Input Power Output Power Number of Outputs
1.72" x 6.4" x7" 85 – 264 Vac 2,200 W @ 230 Vac 4 (non-isolated)
PFC FrontEnd (43,6 x 162,6 x 177,8 mm) 47 – 500 Hz
100 – 380 Vdc 1,100 W @ 115 Vac 375 Vdc
General Performance Refer to data sheet for detailed specifications
Typical Configuration With VIPAC Array; see data sheet for more information
Configurables
pfcfrontend
VIPAC
ARRAY
DISABLE
375 V COM
N/C
375 Vdc
2
1
3
4
PIN FUNCTION
MBJx
PFC F/E
1 375 Vdc
2 375 V COM
N/C3
4
PIN
N/C
FUNCTION
MBJ5
EXTERNAL HUB
1
2
3
4
MBJx
1 OF 4
1
2
3
1 OF 4
CBJx
N/C3
14 Vdc
14 V COM1
2
FUNCTION
CBJx
PIN
24
13
EXTERNAL HUB
MBJ5
10
9
8
7
6
5
4
3
2
1
7
1
3
2
4
5
6
8
9
20
5-7
1-4
+V IN
-V IN
PIN FUNCTION
J1
8 NC/PR
9PE
10 -REMOTE
11-13 -V IN
14-17 +V IN
18 NC/PR
19 PE
20 +REMOTE
J1
OPTIONAL
P/E
11
22
33
55
44
66
10
77
88
20
99
P3
VIPAC ARRAY
ADAPTOR
1
2
P1
3
1
2
3
4
P2
* Available Q2, 2006. Consult Factory.
FE375
Part Number
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
35
AC-DC Web ExpressCode:
The PFC FlatPAC uses Vicor’s field-proven VI-HAM and Maxi DC-DC converters
to deliver up to 600 Watts of clean, reliable power. The PFC FlatPAC is a
single-output power supply available with standard output voltages from
2 – 54 Vdc. It operates from an input of 85 – 264 Vac, includes active power
factor correction (0.99 power factor), and meets EN61000-3-2 harmonic
current limits. Internal filtering provides compliance to EN55022-A conducted
EMI. It is available in Vicor’s low profile 1.37" (34,8 mm) FlatPAC chassis, in
either finned or conduction-cooled (CC) versions.
AC-DC PFC Single Output Power System PFC FlatPAC
Input: 85 – 264 Vac
Power factor: 0.99
Single output: Up to 600 W
2 – 54 Vdc
Low profile package:
1.37" x 4.9" x 9.25"
(34,8 x 124,4 x 235 mm)
Safety agency approvals:
cULus, cTÜVus, CE Marked
High efficiency
Remote sense
Current limit
Thermal shut down
OVP
Features
Parameter Rating Unit Notes
Input
Voltage 85 – 264 Vac
Frequency 47 – 63 Hz
47 – 440 Hz I-Grade
Regulation line / load 0.5 % 10 to 100% load
Mechanical
Weight 44.8 (1,304) oz (g)
Size 1.37 x 4.9 x 9.25 inches
24,8 x 1,244 x 235 mm
Operating temperature (case)
C-Grade and E-Grade 0 to +85 ˚C
I-Grade –30 to +85 ˚C
Storage temperature (case)
C-Grade and E-Grade 30 to +100 ˚C
I-Grade –55 to +100 ˚C
General Performance Refer to data sheet for detailed specifications
Input
Universal
85 – 264 Vac
Output Voltage
0 = 5.0 V 4 = 48 V
1 = 12 V Z = 2.0 V
2 = 15 V Y = 3.3 V
3 = 24 V J = 36 V
L = 28 V G = 54 V
Product Grade (°C)
E = 0 to 85°C case
C = 0 to 85°C case
I = –30 to 85°C case
Output Power
Vout = <5 V Vout ≥12 V
Q = 80 A M = 600 W
Options
-CC = Conduction Cooled
Configurables
pfcflatpac
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
VI- CMU 3 C M- -
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
36
AC-DC Web ExpressCode:
The LoPAC Family consists of three power supplies and are available as one-, two-, or three-slot packages.
For maximum flexibility, they are configured with standard Vicor DC-DC converters. These modules cover the
entire range of outputs from 2 – 95 Vdc (higher through series arrays) and 25 – 600 W, as well as an array
of non-standard voltages. Depending on the configuration, the LoPACs can provide up to six user-specifiable
isolated outputs.
AC-DC Switcher Power Supplies LoPAC Family – PFC Mini, PFC Micro and PFC MicroS
Near unity power factor
Power factor corrected
Output power: Up to 1,500 W
Choice of full, half, or quarter brick
Up to 6 user-specifiable outputs
Power density: Up to 11 W/in3
Autosense feature
Agency approvals:
cTÜVus, CE Marked
Fan cooled
Features
Standard Single-Output AC-DC Switchers
PFC MicroS* Vout Amps Watts
PS1-01-48 48 12.5 600
PS1-01-28 28 21.4 600
PS1-01-24 24 25.0 600
PS1-01-12 12 50.0 600
PS1-01-05 5 80.0 400
* Add -G to the end of the part number for
RoHS compliant
PFC Mini* Vout Amps Watts
PM1-03B-48-2 48 31.2 1,500
PM1-03B-28-2 28 53.6 1,500
PM1-03B-24-2 24 62.5 1,500
PM1-03B-12-2 12 125.0 1,500
PM1-03B-05-2 5 240.0 1,200
* Replace -2 with -G for RoHS compliant
PFC Micro* Vout Amps Watts
PC1-02B-48 48 16.7 800
PC1-02B-28 28 28.6 800
PC1-02B-24 24 33.3 800
PC1-02B-12 12 66.7 800
PC1-02B-05 5 160.0 800
* Add -G to the end of the part number for
RoHS compliant
Low Profile PFC – 1.72" (43,7 mm) / 1.86" (47,2 mm)
Configure a LoPAC
online at
vicorpower.com/vspoc
Configurables
lopac
PM X
1–X
2X3-X4XXXX -X5-X6
Product Prefix
PM = PFC Mini
PC = PFC Micro
PS = PFC MicroS
Optional Factory
Assigned
Optional Codes
LL = Low Leakage
QF= Quiet Fan
Optional Factory
Assigned
2 = FasTrak
G = RoHS
Factory
Assigned
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all numbers.
Number of
VI-200 / VI-J00
Series Modules
Number of
Maxi, Mini or Micro
Series Modules
Number of Output
Voltages
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
37
General Performance Refer to data sheet for detailed specifications
Input Number Number Maximum Output Power Modules
Product Size Voltage of Slots of Outputs @ 230 Vac @ 115 V per Slot
PFC Mini 12.2” x 6” x 1.72” 85 – 264 Vac 3 6 1,500 W 800 W 1 Full or 2 Half
(309,9 x 152,4 x 43,6 mm) 100 – 380 Vdc
PFC Micro 10.4” x 5.06” x 1.86” 85 – 264 Vac 2 6 800 W 500 W 1 Full or 2 Half
(264,1 x 128,5 x 47,3 mm) 100 – 300 Vdc or 3 Quarter
PFC MicroS 7.95” x 5.06” x 1.86” 85 – 264 Vac 1 3 600 W 500 W Full or 2 Half
(201,9 x 128,5 x 47,3 mm) 100 – 300 Vdc or 3 Quarter
For detailed information, review specific product design guides available online at vicorpower.com
PFC Mini
PFC Micro
PFC MicroS
LoPAC Family
Accessories
see page 51
New Affordable Power Supply Option The VANTAGE Line
Now you can have the Westcor “advantage” of power supplies at a 15% discount (complete power supplies). Westcor’s VANTAGE
Line of power supplies was developed with all of the user configurability, field configurability, power density, and high efficiency that
Westcor offers and with only minor specification changes.
Applicable on all new design-ins starting March 21, 2006
You can configure your complete VANTAGE power supply NOW by visiting
VSPOC (Vicor System Product Online Configurator), the flexible,
easy-to-use power supply configurator at vicorpower.com/vspoc
For more information, call your local Vicor Representative. For your nearest Rep location go to vicorpower.com/contact_us
Product Size Input Voltage Output Power # of Outputs Slot Configurations
Mini 9.5" x 6.0" x 3.4" 115/230 Vac; Strappable 1,000 W @ 115 Vac 1 – 10 Outputs ModuPAC(M), JrPAC(J),
MegaPAC (241,3 x 152,4 x 86,4) 260-380 Vdc or 230 Vac (5 slots) DualPAC(D), RAMPAC(R), BatPAC(B)
Autoranging 11.9" x 6.0" x 3.4" 115/230 Vac; Autoranging 1,200 W @ 115 Vac 1 –16 Outputs ModuPAC(M), JrPAC(J),
MegaPAC (302,3 x 152,4 x 86,4) 260-380 Vdc 1,600 W @ 230 Vac (8 slots) DualPAC(D), RAMPAC(R), BatPAC(B)
PFC 12.3" x 6.0" x 3.4" 85 – 264 Vac 1,200 W @ 115 Vac 1 –16 Outputs ModuPAC(M), JrPAC(J),
MegaPAC (312,4 x 152,4 x 86,4) 100 – 380 Vdc 1,600 W @ 230 Vac (8 slots) DualPAC(D), RAMPAC(R), BatPAC(B)
PFC 15.6" x 6.0" x 3.4" 85 – 264 Vac 1,200 W @ 115 Vac 1 –16 Outputs QPAC(L), JrQPAC(LJ),
MegaPAC-EL (396,2 x 152,4 x 86,4) 100 – 380 Vdc 1,600 W @ 230 Vac (8 slots) DualQPAC(LD)
4 kW 17.0" x 7.5" x 4.9" 208 or 240 Vac; 3-Phase 2,000 W - 4,000 W, (3Ø) 1 – 20 Outputs QPAC(L), DualQPAC(LD),
MegaPAC-EL (431,8 x 190,5 x 124,5) 260 – 352 Vdc 1,500 W, (1Ø) (10 slots) JrQPAC(LJ), QPAC(XU)
PFC 12.3" x 6.0" x 3.4" 85 – 264 Vac 1,200 W @ 115 Vac 1 –13 Outputs BatPAC(B), ModuPAC(M), JrPAC(J),
MegaPAC-HP (312,4 x 152,4 x 86,4) 100 – 380 Vdc 2,400 W @ 230 Vac (8 slots) DualPAC(D), RAMPAC(R), FinPAC(PZ)
PFC 15.6" x 6.0" x 3.4" 85 – 264 Vac 1,200 W @ 115 Vac 1 –13 Outputs QPAC(L), DualQPAC(LD),
MegaPAC-HPEL (396,2 x 152,4 x 86,4) 100 – 380 Vdc 2,400 W @ 230 Vac (8 slots) JrQPAC(LJ), FinQPAC(PZL)
4 kW 14.0" x 7.5" x 4.9" 208 or 240 Vac; 3-Phase 2,000 W - 4,000 W, (3Ø) 1 –20 Outputs ModuPAC(M), JrPAC(J), DualPAC(D),
MegaPAC (355,6 x 190,5 x 124,5) 260 – 352 Vdc 1,500 W, (1Ø) (10 slots) RAMPAC(R), BatPAC(B), UniPAC(XQ)
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
38
AC-DC Web ExpressCode:
The MegaPAC family from Westcor consists of eight fan-cooled,
configurable power supplies that enable users to factory configure
almost any set of output requirements by combining appropriate slide-in
output assemblies called ConverterPACs, with the appropriate chassis.
The MegaPAC chassis has a standardized feature-laden front end with
slots to accept the ConverterPACs. Models are available with single or
three-phase AC inputs. MegaPACs will also operate from high-voltage
DC input. Features include EMI/RFI filtering, enable / disable, general
shut down, output sequencing. and AC OK.
User-configurable Power Supply •1 – 20 Outputs MegaPAC Family
200 to 4,000 Watts
User-configurable outputs
DC input capability
Power factor corrected (some models)
Up to 20 outputs
Low ripple 10 mV p-p or 0.15%,
whichever is greater (some models)
Fan cooled
Efficiency: >80%
Agency approvals: cTÜVus, CE Marked
Low leakage option available (some model)
Current sharing available
Features
General Performance Refer to data sheet for detailed specifications
Configure your
MegaPAC online at
vicorpower.com/vspoc
Configurables
megapac
For detailed information, review specific product design guides available online at vicorpower.com
MP X
1–X
2XXXX -X3-X4X5-X6
Product Prefix
MP = PFCs, Autoranging or 3-Phase using
VI-200 / VI-J00 Series Modules only
MX = PFCs, Autoranging or 3-Phase
using VI-200 / VI-J00 Series and/or
Maxi Series Modules only
MM = Strappable
Optional
Codes
2 = FasTrak
G = RoHS
Optional
Codes
Factory
Assigned
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Optional Codes
1 = Autoranging /
Strappable
4 = 3-Phase
7 = PFC
9 = Autoranging
Number of Output
Voltages
Optional Codes
EL = Extended Length
LL = Low Leakage
MegaPAC Series Low Noise Series High Power Series * FinPACs and FinQPACs require two slots
bricks1
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
39
AC-DC
ConverterPACs incorporate VI-200 or VI-J00 and / or Maxi Vicor DC-DC converter bricks. For additional power, ConverterPACs
can be paralleled. Some ConverterPACs are available for low-noise applications (VXI options, RamPACs and QPACs) and as
current sources (BatPACs). All ConverterPACs can be easily removed in the field by loosening a single screw and sliding the
unit out of the chassis.
For general electrical specifications for VI-200 / VI-J00 ConverterPACs, see module specifications on the
VI-200 / VI-J00 information sheets in the library section of our website.
For general electrical specifications for Maxi ConverterPACs, see module specifications on the
data sheets in the library section of our website.
ConverterPACs Output power up to 600 Watts
VI-200 / VI-J00 ConverterPACs Output power up to 200 Watts
Maxi ConverterPAC Output power up to 600 Watts
JuniorPAC (J)
RoHS Compliant (GJ)
Up to 100 W
DualPAC (D)
RoHS Compliant (GD)
Dual outputs:
Up to 100 W / output
BatPAC (B)
RoHS Compliant (GB)
Up to 200 W
programmable current source
RamPAC (R)
RoHS Compliant (GR)
Up to 100 W
QPAC (L)
RoHS Compliant (GL)
Up to 200 W
DualQPAC (LD)
RoHS Compliant (GLD)
Up to 100 W / output
JrQPAC (LJ)
RoHS Compliant (GLJ)
Up to 100 W
ModuPAC (M)
RoHS Compliant (GM)
Up to 200 W
FinPAC (PZ)
RoHS Compliant (GPZ)
Up to 600 W
FinQPAC (PZL)
RoHS Compliant (GPL)
Up to 600 W
QPAC (XQ)
RoHS Compliant (GXQ)
Up to 500 W
UniPAC (XU)
RoHS Compliant (GXU)
Up to 500 W
Configurables
Web ExpressCode: cpacs
bricks2
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
40
AC-DC Web ExpressCode: Web ExpressCode:
With a power density greater than 7 W/in3, the FlatPAC-EN is capable of
providing up to 500 W (425 W for EN compliance) from up to four isolated
outputs. The FlatPAC-EN can be configured with standard Vicor DC-DC
converter modules. Like all other configurable power supplies offered by
Vicor, the optimum FlatPAC-EN solution can be factory configured based
on the exact voltage and power requirements of the customer.
AC-DC Power Supply FlatPAC-EN
EN61000-3-2 harmonic current compliance
Output power to 500 W
(425 W for EN compliance)
Power density: >7 W/in3
Ultra low profile: 1.4" (35,6 mm) height
RS-232 microcontroller interface
Rugged: Meets MIL-STD-810E,
category 10 for vibration
Agency approvals: cTÜVus, CE Marked
Choice of full-, half- and quarter-brick
modules with outputs from 2 to 95 Vdc and
25 to 500 Watts, as well as an array of
non-standard output voltages
Special extended temperature range (-E) and
low leakage (-LL) versions available
Conduction or convection cooled (same model)
Features
Product Size Input Power Output Power Number of Outputs
FlatPAC-EN 9.2” x 5.0” x 1.4” 85 – 132 / 180 – 264 Vac 500 W 1 – 4
(233,7 x 127 x 35,6 mm) 250 – 380 Vdc (425 W for EN compliance)
General Performance Refer to data sheet for detailed specifications
FlatPAC-EN
Accessories
see page 51
Configure a
FlatPAC-EN
online at
vicorpower.com/vspoc
Configurables
flatpacen
Layout Configurations
CBJ1
Interface Conn.
M2
VI-200,
Maxi
or
Batmod
M1
VI-J00
or
Mini
MBJ1
Input Conn.
MiniHAM
CBJ1
Interface Conn.
M1
VI-J00
or
Mini
MBJ1
Input Conn.
MiniHAM
M2
VI-J00
or
Mini
M3
VI-J00
or
Mini
CBJ1
Interface Conn.
MBJ1
Input Conn.
M2
Micro
M1
Micro
M3
Micro
MiniHAM
M4
VI-J00
or
Mini
Note: The type of output connector a FlatPAC-EN has depends on which modules are used. For example, if a two output configuration uses two half bricks (instead of a
full brick and half brick) this two output configuration will have the 18 pin Molex connectors, not stud connectors.
Quadruple Outputs
Assumes only half
and / or quarter bricks
are used. Two 18-pin
Molex Connectors.
Single or Dual Outputs
Assumes either a full brick
and / or half brick is used.
Stud Connectors
For a single output
configuration,
either M1 or M2 is used.
Triple Outputs
Assumes only half
bricks are used.
Two 18-pin
Molex Connectors.
FL X
1–X
2X3-XXXX -X4-X5
Product Prefix
FL = FlatPAC-EN
Optional Factory
Assigned
2 = FasTrak
G = RoHS
Optional Codes
LL = Low Leakage
Factory
Assigned
Part Numbering
For ordering, call your nearest Vicor office. See back cover for all phone numbers.
Number of
VI-200 / VI-J00
Series Modules
Number of
Maxi, Mini or Micro
Series Modules
Number of
Output Voltages
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
41
DC-DC Web ExpressCode: Web ExpressCode:
Web ExpressCode:
The DC MegaPAC DC-DC switcher allows users to instantly
configure highly-efficient power supplies. A complete power supply
is configured by selecting and inserting up to eight slide-in output
assemblies called "ConverterPACs." ConverterPACs incorporate
one or two Vicor DC-DC converters and are available in a wide
array of outputs and power levels. If output requirements change,
the user can simply unlock a single screw and replace the slide-in
ModuPAC assembly with one that has the desired rating.
DC inputs of 12 to 72 V available
Output power: Up to 16 outputs
and 1,600 W total power
(depending upon input voltage)
Temperature rating:
Full power to 45°C; half power to 65°C
Size: 3.4"H x 6.0"W x 12.0"L
(86,3 x 152,4 x 304,8 mm)
9.25 lbs. fully configured
Fan cooled
Soft start for limiting inrush current
Conducted EMI meets BTR 2511
Remote sense capability and output
overcurrent protection on all outputs
Output overvoltage protection on most outputs
Output overtemperature protection on all outputs
Input over, under and reverse voltage protection
Box-to-box paralleling capability
Input temperature monitor, warning and shut down
CE Marked
Features
Configurables
dcmegapac
The AC input is 115 / 230 Vac autoranging,
50 – 60 Hz. There are two DC input options: 48 V
(38 – 72 V) or 150 V (105 – 200 V). Consisting of
two configurable and independent outputs of 400 W
and 200 W, the supply delivers a full-load output
power of 600 W.
AC and DC Redundant Input Power Supply RackguardTM
AC input: 115/230 Vac, autoranging
DC input: 48 V (38 – 72 V) or 150 V (105 – 200 V)
Output: 24 to 48 V
Total power: 600 W
Convection cooling
Dimensions: 17" L x 9.57" W x 4.87" H
(431,8 x 243,07 x 123,6 mm)
Features
rackguard
DC-DC Power Supply DC MegaPACTM
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
42
AC-DC Web ExpressCode:
Product Size Input Max # Maximum Cooling Notes
Voltage of Outputs Power
Badger 2.55” x 7.0” x 13.75” 85 – 264 Vac 12 1,500 W Internal fans OCP, OVP, and OTP on all outputs
(64,8 x 177,8 x 349,3 mm)
General Specifications Typical unless otherwise noted
The Badger is a rugged PFC multi-output power supply,
capable of withstanding extreme environments and stresses
often inherent with military applications.
MIL-COTS PFC Power Supply BadgerTM
Configurables
badger
Product Size Input Max # Maximum Cooling Notes
Voltage of Outputs Power
PB1004PFC 1.74” x 8.08” x 10.28” 85 – 264 Vac 4 1,000 W Internal fans Low power stand-by output
(44,2 x 205,2 x 261,1 mm)
PB1005AC 1.68” x 7” x 10.5” 115/230 Vac 5 1,000 W Internal fans SEMI F47 compatible
(42,7 x 177,8 x 266,7 mm) 300 Vdc
PB1506PFC 1.75” x 12.6” x 16.84” 90 – 264 Vac 6 1,500 W Internal fans Two aux. low power outputs
(44,5 x 320,04 x 427,7 mm)
PBC1002AC 2.5” x 7.38” x 9” 115/230 Vac 2 1,000 W Cond., conv., liquid Customizable baseplate / heat sink
(63,5 x 187,5 x 228,6 mm)
PBC1002PFC 2” x 6.5” x 13.5” 90 – 264 Vac 2 1,000 W Cond., conv., liquid Customizable baseplate / heat sink
(50,8 x 165,1 x 342,9 mm)
General Specifications Refer to data sheet for detailed specifications
The PowerBank is a low-profile AC-DC switching
power supply that offers up to six configurable
outputs at up to 1,500 Watts.
AC-DC Low Profile Power Supply PowerBankTM
powerbank
javelin
Product Size Input Max # Maximum Cooling
Voltage of Outputs Power
Javelin I 4.9” x 7.0” x 10.75” 85 – 254 Vac 1 600 – 1,800 W Internal fans
(124,5 x 177,8 x 273,05 mm)
Javelin II 4.9” x 7.0” x 9.5” 85 – 254 Vac 1 600 – 1,800 W No fan
(124,5 x 177,8 x 241,3 mm)
Javelin III 7.0” x 16.0” x 13.0” 85 – 254 Vac 1 1,800 – 5,400 W Internal fans
(177,8 x 406,4 x 330,2 mm) 3-Phase
General Specifications Refer to data sheet for detailed specifications
The Javelin is an AC input power supply with a single DC output,
capable of up to 5,400 W, in a rugged package suitable for industrial
and military applications.
MIL-COTS Power Supply JavelinTM
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
43
CUSTOM custom
✷= Vicor Integration Architects (VIAs)
Vicor Integration Architects
Aegis Power Systems
North Carolina
ConverTec Corporation
Minnesota
Freedom Power Systems
Texas
Granite Power Technologies
New Hampshire
Mission Power Solutions
California
Northwest Power Integrations
Oregon
Technical Support
VIAs provide custom power solutions for:
COMMUNICATIONS INDUSTRIAL DATACOM TEST EQUIPMENT MEDICAL DIAGNOSTICS MIL-COTS TRANSPORTATION
Web ExpressCode:
Custom Power Solutions
Designed To Fit
Your Specific Needs
Vicor VIAs: Small company responsiveness,
large company resources
Each of the six Vicor Integration Architects (VIAs), located throughout
the United States, designs and manufactures turnkey custom power systems.
VIAs maintain the flexibility of a small entrepreneurial company while taking
advantage of the technical and business resources of Vicor to deal effectively
with the most challenging power problems. Their total focus is on the power
solution that best satisfies the needs of each customer.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
44
CUSTOM Web ExpressCode:
Every Vicor Integration Architect has developed high-level technical
expertise and design and manufacturing skills in these key areas:
VIAs have:
Built custom applications for satellite transceivers, PBX, digital phones,
and microwave radio and are up-to-date on the changing requirements of the
communications industry for powerful and quick-to-build power systems.
Developed customized power supplies for use in harsh environments
and industrial conditions. Applications have included avionics, telemetry
systems, and control systems.
Developed a variety of custom supplies for EDP. Applications have included full
computer systems, portable workstations, and redundant disk arrays.
Developed ruggedized power systems and supplies specifically for test equipment.
Applications have included portable and automated test fixtures.
Designed and built custom power supplies for a wide range of medical applications,
including scanners, x-ray systems, and other medical equipment and tools.
Extensive experience with military COTS and aerospace applications and can
provide module-based custom solutions quickly and cost effectively.
Based on Vicor high-density, low-noise DC-DC converter modules every VIA design exists to solve your unique requirements in the
shortest possible time. Need fault tolerance? Hot swap? High power? Have size and weight constraints? Demanding thermal
or noise requirements? NOT A PROBLEM.
custom
For information on component-based custom systems designed and manufactured to meet your specific requirements, go to vicorpower.com
In addition to manufacturing your custom solution, VIAs arrange for agency
approvals. By basing their designs on Vicor component power modules, VIAs
can provide prototypes and production quantities of your power supply in far
less time and with far less risk than conventional discrete approaches.
Technical Support
Vicor's VARs - Custom Turnkey Power Solutions Worldwide
Throughout Europe and Asia Pacific, Vicor and its distributors operate in partnership with Vicor's Value-Added Resellers (VARs).
These companies have the same experience, manufacturing capabilities, and quality focus as Vicor's VIAs in creating custom turnkey
power systems. Typical applications include:
Industrial controllers
Test equipment
Super computers
RAID storage
Satellite transceivers
Network encryption
Avionics
Missile guidance and control
Mobile tracking radar
Shipboard communications and networking
Railroad telemetry
Transportation control
In-flight entertainment
Field-portable gas chromatograph / mass spectrometer
Battery charger
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
45
ACCESSORIES Web ExpressCode: Web ExpressCode:
ModuMate Sockets For Maxi, Mini and Micro Series
Module Exchange Tool
Used in facilitating the proper extraction of modules from InMate or SurfMate sockets.
Removal without using the Exchange Tool may cause damage to the sockets.
Description Part Number Price (1 – 9)
Maxi Exchange Tool 22827 $150.00
Mini Exchange Tool 22828 $150.00
Micro Exchange Tool 22829 $150.00
Nominal
0.063"
Min / Max
0.055" / 0.071"
Nominal
0.094"
Min / Max
0.084" / 0.104"
Nominal
0.125"
Min / Max
0.1125" / 0.1375"
InMate: Thru hole sockets*
All sockets are supplied on InMate headers to assure proper alignment during installation.
SurfMate: Surface mount sockets*
22827
22829
22828
1. 2. 3.
1. 2. 3. 4.
Use module
pin style**
* For individual input / output purchases, a 35-piece minimum (and multiples) applies to Maxis / Minis and a 40-piece minimum for Micros.
** See p. 15 for pin styles.
Full brick (Maxi) Half brick (Mini) Quarter brick (Micro)
Board Mounting Input Output 5 Sets Input Output 5 Sets Input Output 5 Sets
Thickness Style
Inboard P/N 18374 P/N 18382 P/N 18362 P/N 18374 P/N 18384 P/N 18366 P/N 18376 P/N 18386 P/N 18370 S, F
$3.56 $5.35 $50.00 $3.56 $5.35 $50.00 $3.89 $3.01 $38.75
Onboard P/N 18378 P/N 18388 P/N 18364 P/N 18378 P/N 18390 P/N 18368 P/N 18380 P/N 18392 P/N 18372 N, G
$3.56 $5.35 $50.00 $3.56 $5.35 $50.00 $3.89 $3.01 $38.75
Inboard P/N 18375 P/N 18383 P/N 18363 P/N 18375 P/N 18385 P/N 18367 P/N 18377 P/N 18387 P/N 18371 S, F
$3.56 $5.35 $50.00 $3.56 $5.35 $50.00 $3.89 $3.01 $38.75
Onboard P/N 18379 P/N 18389 P/N 18365 P/N 18379 P/N 18391 P/N 18369 P/N 18381 P/N 18393 P/N 18373 N, G
$3.56 $5.35 $50.00 $3.56 $5.35 $50.00 $3.89 $3.01 $38.75
Onboard P/N 21539 P/N 21543 P/N 21510 P/N 21539 P/N 21544 P/N 21511 P/N 21540 P/N 21545 P/N 21512 N, G
$3.56 $5.35 $50.00 $3.56 $5.35 $50.00 $3.89 $3.01 $38.75
Use module
pin style**
Full brick (Maxi) Half brick (Mini) Quarter brick (Micro)
Board Mounting Input Output 5 Sets Input Output 5 Sets Input Output 5 Sets
Thickness Style
Surface P/N 22100 P/N 22101 P/N 16017 P/N 22100 P/N 22102 P/N 16021 P/N 22103 P/N 22104 P/N 16025
All mount $5.18 $6.82 $65.00 $5.18 $6.82 $65.00 $4.90 $4.10 $50.00 S, F
sockets
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
46
ACCESSORIES Web ExpressCode: Web ExpressCode: comp
Minimum order quantities may apply.
Fuses and Fuse Holders
Standard design practices as well as safety agency conditions of acceptability often require appropriate fusing
at the input of power conversion components.
Fuse Fuse Holder
Rating Part Number Price Description (to be used with fuse holder) Part Number Price
2 Amps / 450 Vdc 03360* $1.44 PC-Tron®Socket-Type (minimum order 100 pcs.) 03144 $0.64
2.5 Amps / 450 Vdc 08395* $1.44 03144
3 Amps / 250 Vdc 30243 $1.44 03144
5 Amps / 125 Vdc 30276 $1.60 03144
7 Amps / 125 Vdc 30236 $1.12 —
10 Amps / 125 Vdc 30247 $1.12 —
12 Amps / 250 Vdc 05147 $0.90 Vertical mount with stability pins, 0.25" x 1.25" 09981 $4.81
20 Amps / 250 Vdc 22409* $1.50
30 Amps /125 Vdc 23196* $2.75 Horizontal mount, 0.25" x 1.25" 10660* $4.81
6.3 Amps / 400 Vdc 22985 $5.00 PC-Tron®is a registered trademark of Bussman.
03360*,
30243,
30276,
08395*
05147
30236, 30247
09981
10660*
03144
Oscilloscope Test Jacks (for 0.095" diameter probe)
Recommended for common-mode noise measurements.
Description Part Number Price
Shielded, horizontal 01830 $5.88
Shielded, vertical 06207 $5.35
MOVs
For use with Front-end Modules.
Description Part Number Price
275 V MOV, 14 mm Disc 30076 $1.00
68 V MOV, 10 mm Disc 30234-068 $1.00
120 V MOV, 10 mm Disc 30234-120 $1.00
200 V MOV, 10 mm Disc 30234-200 $1.00
220 V MOV, 10 mm Disc 30234-220 $1.00
Gas Discharge Tube
For use with the ENMods and VI-ARM.
Part Number Spark Over (DC) Price
13755 220 V $2.67
30515 75 V $2.67
Phased Array Controller (PAC) chip
For use with arrays of up to 12 converters, the PAC chip provides
phased operation to minimize overall noise.
Part Number 10 Piece price
30488 $12.28
Order in 10 piece lots
13755
Diodes and Rectifiers
Fwd. Peak Rev.
Characteristics Voltage Case Part Number Price
Diode: Used for isolating signals (i.e., Gate In / Gate Out).
1 Amp 800 V DO-41 00670 $1.07
1 V @ 10 mA 100 V DO-35 30647 $0.10
Schottkg Barrier Rectifier:
1 Amp 20 V 26108 $0.50
OR'ing Diodes: Used for fault-tolerant applications.
0.4 V @ 30 A @ 100°C 35 V TO-220-Dual 02838 $3.74
0.38 V @ 80 A @ 100°C 15 V D-61-8 10122 $19.26
Bridge Rectifiers: Used to rectify AC line.
8 Amps 600 V 03261 $3.10
35 Amps 600 V 30660 $10.43
Zener Diode(1.5KE51A): Use with ENMod system.
51 V 41A-04 30262-051 $1.00
Optocouplers: For logic disable.
Toshiba TLP595G (or TLP795G) 13468* $10.70
6N139 26106 $2.00
HCPL-0701 Darlington 26109 $3.00
* Not RoHS compliant
All parts are RoHS compliant unless otherwise noted.
13468* 26106
02838
30660
03261 00670, 30647
Components
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
47
ACCESSORIES Web ExpressCode: Web ExpressCode:
Capacitors
Capacitor, Multilayer Polymer
Rating Part Number Price
0.81 µF, 250 V 06852 $0.96
Capacitors, X-type
To meet the filtering specifications of FCC Level A, add
a 0.47 µF “X-type” capacitor to the input of the VI-AIM.
Description Part Number Price
“X” Cap., 0.68 µF 11217 $3.74
“X” Cap., 0.47 µF 03047 $2.94
“X” Cap., 0.33 µF 00927 $2.14
“X” Cap., 0.22 µF 04068 $3.21
“X” Cap., 0.15 µF 03269 $1.33
“X” Cap., 1.0 µF 02573 $2.67
Capacitors, Aluminum Electrolytic
Radial lead, 16 mm x 15 mm
Description Part Number Price
2,200 µF, 6.3 V 13438* $2.14
1,500 µF, 10 V 13440* $2.14
1,200 µF, 16 V 13442* $2.14
820 µF, 25 V 13444* $2.14
560 µF, 35 V 13446* $2.14
200 µF, 63 V 30787 $2.14
120 µF, 100 V 30789 $2.14
Radial lead, 12 mm x 25 mm
Description Part Number Price
10 µF, 450 V 13469* $1.60
Minimum order quantities may apply.
Radial lead, 10 mm x 16 mm
Description Part Number Price
680 µF, 6.3 V 13439* $0.96
560 µF, 10 V 13441* $0.96
390 µF, 16 V 13443* $0.96
270 µF, 25 V 30468 $0.96
180 µF, 35 V 13447* $0.96
68 µF, 63 V 30788 $0.96
33 µF, 100 V 30469 $0.96
VIEW MECHANICAL DRAWINGS ON-LINE!
vicorpower.com
Capacitors, Ceramic
Product Description Part Number Price
VI-AIM 470 pF, 500 V 30458 $0.80
0.01 µF, 500 V 28054 $0.80
Capacitors, Hold-up
Product Description Part Number Price
VI-AIM 270 µF, 200 V 30769 $4.81
270 µF, 400 V 30240 $10.00
VI-HAM 470 µF, 450 V 30249 $13.37
FARM / ARM 1,200 µF, 200 V 30275 $6.50
2,200 µF, 200 V 30483 $11.77
Capacitors, Surface Mount Polymer
Low ESR, Polymer 0.287" x 0.169" pkg.
Rating Part Number Price
330 µF, 6.3 V 23484-337 $3.00
470 µF, 6.3 V 23484-477 $3.00
1,000 µF, 2.5 V 23577-108 $3.00
680 µF, 2.5 V 23577-687 $3.00
470 µF, 4 V 23578-477 $3.00
680 µF, 4 V 23578-687 $3.00
220 µF, 10 V 23579-227 $3.00 Capacitors, Tantalum
Solid tantalum capacitor used to reduce output ripple.
Description Part Number Price
270 µF, 10 V 24252* $6.25
120 µF, 20 V 30506 $6.25
68 µF, 30 V 30507 $6.25
27 µF, 50 V 30259 $6.25
Capacitors, Y-type
For EMI / RFI considerations, Y capacitors should be used
with any of Vicor’s DC-DC converter modules.
Description Part Number Price
“Y” Cap., 1,500 pF 00770 $1.71
“Y” Cap., 4,700 pF 01000 $1.33
“Y” Cap., 0.01 µF 01501 $1.01
“Y” Cap., 0.022 µF 03093 $1.39
“Y” Cap., 4,700 pF SMT version 25283 $2.25
“Y” Cap., 1,500 pF SMT version 30802 $2.25
caps
* Not RoHS compliant
All parts are RoHS compliant unless otherwise noted.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
48
ACCESSORIES Web ExpressCode: Web ExpressCode: chokes
Basket Chokes
0.80" x 0.39" x 0.33" (20,3 x 9,8 x 8,45 mm)
Low profile, surface mount power inductors.
Other values available, consult factory.
Inductance1Rated DCR Part
(open circuit) Current (max.) Number Price
243.09 µH 3.9 A 156.35mΩ31499-02 $3.50
115.17 µH 5.6 A 77.50 mΩ31499-03 $3.50
47.40 µH 8.8 A 29.38 mΩ31499-05 $3.50
13.28 µH 16.6 A 7.56 mΩ31499-08 $3.50
5.90 µH 25.0 A 3.23 mΩ31499-10 $3.50
2.62 µH 37.5 A 1.31 mΩ31499-12 $3.50
1.48 µH 50.0 A 0.82 mΩ31499-13 $3.50
1.03 µH 60.0 A 0.58 mΩ31499-14 $3.50
0.66 µH 75.0 A 0.37 mΩ31499-15 $3.50
0.37 µH 100.0 A 0.22 mΩ31499-16 $3.50
1Inductance values roll off to approximately 35% at full rated current.
Full data sheet available at vicorpower.com
Basket Choke Design Kit
Includes 6 pieces of the 10 part numbers
listed above.
Part Number 28806* Price $180.00
Minimum order quantities may apply.
Inductors, Common Mode
Common-mode inductors provide a high level of attenuation of
common-mode currents.
Inductance / DC Current /
Winding Resistance Part Number Price
1000 µH 12 A / 6.5 mΩ31743 $14.23
3000 µH 7 A / 18 mΩ31742 $14.23
2163 µH 1 A / 42 m (low profile) 31943 $4.65
1.3 mH 13 A / 14 mΩ32006 $12.50
Inductor, Differential Mode, Input
Inductance / DC Current /
Winding Resistance Part Number Price
22 µH 12 A / 5.8 mΩ29764 $3.21
1 mH 4 A / 250 mΩ36-00036* $10.70
Inductor, Output Sense Compensation
Inductance Part Number Price
1 mH 36-00030* $1.50
Inductors, Differential Mode
Output inductors may be used to reduce differential output noise by
approximately 20 dB.
Inductance DC Current (max.) Part Number Price
0.2 µH 40 A 30268 $3.21
27 µH 12 A 32012 $3.21
1.8 µH 10 A 32562 $3.21
Common Mode Output Inductors
Inductance DC Current (max.) Part Number Price
420 µH 20 A 36-00037* $10.70
350 µH 40 A 36-00029-01* $10.70
1.27 mH 10 A 36-00029-04* $10.70
70 µH 80 A 36-00029-06* $22.50
110 µH 60 A 36-00029-07* $15.00
PR Bus Isolation Transformer
Developed for isolation of PR Bus signal when used with 2nd
Generation parallel configurations. Consult Vicor for applications
instructions.
Part Number Price
29768 $7.50
VI-HAM Line Filter
The VI-HAM requires an external line filter. When used in conjunction
with part number 07818, the VI-HAM / Filter combination will meet
the requirements of worldwide EMI standards.
Part Number Price
30205* $29.96
Magnetics
* Not RoHS compliant
All parts are RoHS compliant unless otherwise noted.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
49
ACCESSORIES Web ExpressCode: Web ExpressCode:
Minimum order quantities may apply.
VI-J00 VI-200
ThermMate Thermal Pads
For use with Vicor modules, ThermMate thermal pads are a “dry” alternative to
thermal compound and are pre-cut to the outline dimensions of the module.
Thermal Pad Part Number Thickness Price
VI-200 (10 pc. pkg.) 20266 0.007" $37.50
VI-J00 (10 pc. pkg.) 20267 0.007" $30.00
Module Standoffs
For mechanical mounting of VI-200 and VI-J00 Series modules.
Also provides grounding of the module from the baseplate
to the printed circuit board. (Sold individually)
Description Part Number Price
0.525" Long, 0.25" Hex 10692-01 $1.07
Grounding Clips
For use with FinMod and SlimMod packaging options (see page 13). Grounding clips
provide a convenient means for making electrical connection between the heat sink
assembly and the printed circuit board.
Use With... Part Number Price
F1 and F2 32185 $0.42
F3 and F4 32186 $0.42
SlimMods 09674* $0.64
V•I Chip Heat Sinks and Push-Pins
For use with PRM, VTM and BCM V•I Chip Power Components.
Heat Sink Part Number Price Push-Pins Part Number Price
(includes thermal interface) (incudes spring) (100 pieces) )
Transverse Fins, 11 mm 32438 $3.00 0.051" – 0.069" PCB 32434 $12.00
Transverse Fins, 6.3 mm 32439 $3.00 0.070" – 0.104" PCB 32435 $12.00
Longitudinal Fins, 11 mm 32440 $3.00 0.105" – 0.132" PCB 32436 $12.00
Longitudinal Fins, 6.3 mm 32441 $3.00 0.133" – 0.156" PCB 32437 $12.00
30074
30075
0.90" Fin
P/N 30089
$8.02
0.90" Fin
P/N 30090
$8.02
0.70" Fin
P/N 30775
$8.02
1.45" Fin
P/N 30780
$10.70
0.40" Fin
P/N 30194
$8.02
0.70" Fin
P/N 30193
$8.02
Longitudinal Fins Transverse Fins Longitudinal Fins Transverse FinsLongitudinal Fins Transverse Fins
Longitudinal Fins Transverse Fins Transverse Fins
0.90" Fin
P/N 30191
$5.35
0.90" Fin
P/N 30771
$5.35
0.40" Fin
P/N 30140
$5.35
Sockets
Sockets are available for all Vicor VI-200 and
VI-J00 modules and are intended for applications
requiring ease of module installation or removal.
Vicor modules have nine pins, seven of which are
0.040" and two are 0.080".
Pin Size Finish Part Number Price
0.040" Electro-tin 30074 $0.42
0.080" Electro-tin 30075 $0.85
mounting1
* Not RoHS compliant
Mounting & Thermal Management
All parts are RoHS compliant unless otherwise noted.
20266
20267
32186
32185
09674*
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
50
ACCESSORIES Web ExpressCode: Web ExpressCode:
Maxi Heat Sinks Mini Heat Sinks Micro Heat Sinks
Threaded Thru Hole Threaded Thru Hole Threaded Thru Hole
0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin
P/N 30482 P/N 30718 P/N 32188 P/N 30195 P/N 32174 P/N 30719
$8.82 $11.25 $7.75 $9.89 $6.36 $8.29
0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin
P/N 30188 P/N 30181 P/N 30189 P/N 30182 P/N 30190 P/N 30183
$8.82 $11.25 $7.75 $9.89 $6.36 $8.29
0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin
P/N 30778 P/N 30720 P/N 30184 P/N 30721 P/N 32173 P/N 30722
$8.82 $11.25 $7.75 $9.89 $6.36 $8.29
0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin
P/N 30196 P/N 30723 P/N 30269 P/N 30724 P/N 30270 P/N 30725
$8.82 $11.25 $7.75 $9.89 $6.36 $8.29
Low-profile side-fin heat sinks – HEIGHT ONLY 0.125" ABOVE MODULE BASEPLATE!!!
ThermMate Thermal Pads
For use with Vicor modules, ThermMate thermal pads are a “dry” alternative to
thermal compound and are pre-cut to the outline dimensions of the module.
Thermal pad Part Number Thickness Price
Maxi (10 pc. pkg.) 20263 0.007" $37.50
Mini (10 pc. pkg.) 20264 0.007" $30.00
Micro (10 pc. pkg.) 20265 0.007" $26.75
Transverse Fins Longitudinal Fins
20263
20265
0.55" Side Fins
P/N 30096
$11.25
0.55" Side Fins
P/N 32190
$9.89
0.55" Side Fins
P/N 30095
$8.29
Not compatible with standoff kits.
20264
Minimum order quantities may apply.
Standoffs and screws
Bulk and single-module kits
compatible with all standard
mounting configurations.
Thermal Management For Maxi, Mini and Micro products
standoffs
mounting2
All parts are RoHS compliant unless otherwise noted.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
51
ACCESSORIES Web ExpressCode: Web ExpressCode:
Connector Kits For FlatPAC, FlatPAC-EN, LoPAC, and MegaPAC products
FlatPAC Accessories
Input and Output Retrofit Kits
Description Part Number Price
Input connector 14136* $6.42
Output connector 14137* $4.28
Input and Output Mating Connectors
Description Part Number Price
Input connector, 6 pin132182* $1.60
Output connector, 5 pin116385* $1.60
1Insertion tool for use with FlatPAC input / output connectors are
available from AMP, Inc., part number 58074-1.
Manual hand tool, part number 58246-1, interchangeable head.
LoPAC Accessories
Connector Kits
Description Part Number Price
PFC Mini 19-130047 $15.00
PFC Micro, PFC MicroS 19-130044 $10.00
Current Share Boards
Description Part Number Price
LoPACs using VI-200 CSB01* $59.00
and VI-J00 Series modules
LoPACs using Maxi, Mini CSB02* $59.00
and Micro Series modules
PFC FrontEnd Accessories
Description Part Number Price
Din Rail Mounting Kit 19-130060 $12.00
Connector Kit 19-130059 $30.00
VIPAC Array Adapter 10-130182 $25.00
MegaPAC Accessories
Connector Kits
Description Part Number Price
Single-phase input 19-130040 $20.00
Three-phase input 19-130041 $30.00
DualPAC output ConverterPacs 19-130042 $6.00
Air block 96-00032-01 $5.00
Current Share Boards
Description Part Number Price
MegaPACs using VI-200 CSB01* $59.00
and VI-J00 Series modules
MegaPAC using Maxi modules CSB02* $59.00
MegaPAC chassis and ConverterPACs can be purchased separately
for scalable systems and / or spares.
Bus Bars
Description Part Number Price
2 holes 88-00033-01 $1.00
3 holes 88-00033-02 $1.00
4 holes 88-00033-03 $1.00
5 holes 88-00033-04 $1.00
Series bus bar 88-00043 $1.00
FlatPAC-EN Accessories
Connector Kit
Description Part Number Price
FlatPAC-EN 19-130044 $10.00
Current Share Boards
FlatPAC-EN using VI-200 CSB01* $59.00
and VI-J00 Series modules
FlatPAC-EN using Maxi, Mini CSB02* $59.00
and Micro Series modules
connects
All parts are RoHS compliant unless otherwise noted.
* Not RoHS compliant
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
52
Web ExpressCode: Web ExpressCode: Web ExpressCode:
Quality Center Online
Explore Vicor’s quality systems through a robust library
of documentation, videos, and process charts.
Generate a report based on ISO 9001:2000 criteria
that entirely meets your specific requirements.
Get your report in PDF format with hyperlinks to
videos and other info of your choosing.
Whitepapers that talk about quality specifics
ISO 9001:2000 certificates
RoHS compliant information
Get in touch with our quality team
The Vicor Quality Center provides you with the specific information you need about Vicor’s
comprehensive quality systems. You can create a custom quality report, take a video tour of our
230,000 sq. ft factory, or walk through every step of our quality process. If there’s something you
can’t find, ask our Vicor Quality Team about your specific question. Our goal is your total satisfaction.
Quality System
Vicor is ISO 9001:2000 Certified through TÜV Management Services. Using a process approach to continuous improvement, this
certification covers all facets of the corporation including operations, engineering, and sales. ISO 9001:2000 Certification is
recognized internationally as the standard for verifying that a company has achieved recognized quality standards and employs
continuous improvement to constantly improve their operations.
Vicor places heavy emphasis on the "Plan-Do-Check-Act" model (PDCA) to foster continuous improvement. We focus on key
performance metrics that are continuously measured and results reviewed. This enables proactive actions to be undertaken to
improve our technology, our products, our processes, and our service to our customers.
Choose from a whole listing of quality videos shot at our manufacturing plant in Andover, Massachusetts. Many process stages
can easily be accessed and viewed by simply clicking a button. The videos take you each step of the way through module
development process, from handling to washing of the module brains, to the label processes.
quality
Quality Library See and hear quality systems at work
Play Video
>>
Play Video
>>
Play Video
>>
Play Video
>>
Play Video
>>
Experience Vicor’s
Quality Center
vicorquality.com
QUALITY
Technical Support
vicorpower.com
53
Web ExpressCode:
53
RoHS Compliance
Environmental Management Systems
Vicor Corporation has a strong commitment to protecting our environment.
As an ISO 9001:2000 registered company and a member of the global community,
we are dedicated to meeting government regulations, international standards, and
our customers' requirements. To those ends, we have developed and currently
maintain Environmental Management Systems (EMS) and the requisite controlled
business, design, and manufacturing processes to service our worldwide
customer base.
rohs
RoHS
Technical Support
As a result of our EMS program, Vicor is pleased to announce the availability of
component-level (brick) products that fulfill the requirements of the European
RoHS Directive 2002/95/EC restricting the use of certain hazardous substances.
Higher-level configurable power supply systems, manufactured by both Vicor
and its Westcor Division, will be available in RoHS-compliant versions. Go to
vicorpower.com for availability on these RoHS products. Vicor allows customers
to specify RoHS-compliant brick products through a simple part numbering
change. The process is available at vicorpower.com. To support customers who
may have exemptions or in industries that do not desire RoHS-compliant
materials, Vicor will continue to provide non-RoHS products. Vicor remains
committed to exceeding our customers' needs and actively participating in
improving our global neighborhood through environmentally friendly initiatives.
Vicor's EMS team is ready to assist you with any question you may have related
to our RoHS products. Please feel free to contact us.
ISO 9001:2000 Certified
Dedicated to developing and maintaining design and
manufacturing processes to competitively service our world-wide
customer base that meet government regulations, international
standards, and our customers requirements.
Announcement!
Component-level (brick) products are now
available that meet European RoHS Directive
2002/95/EC restricting the use of certain
hazardous substance.
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
54
Web ExpressCode: Web ExpressCode: Web ExpressCode: Web ExpressCode: Web ExpressCode:
With Vicor's Custom Module Design System you can design your
own DC-DC converters using our proprietary simulator or using
hundreds of predefined designs. You simply specify design parameters
such as input voltage range, output voltage set point, output power,
packaging, and environmental options. A true expert system, our Custom
Module Design System generates a variety of valid designs, ranks them all,
and selects the optimum one. A unique part number, unit price, and
delivery schedule will be returned to you. You can even order online.
VCAD™ is a patented system that enables users to specify online, the
design of Vicor's VIPAC family from available input voltages, output
configuration, thermal features, mechanical configurations, and an
optional power-up / power-down sequencing feature.
And, VSPOC™ (Vicor Systems Product Online Configurator) enables the
registered user to specify and verify complete AC-DC power supplies in
real time. The system is fully integrated with Westcor manufacturing
operations. Once the user approves the product configuration, a bill of
materials is generated and an order can be placed immediately.
Vicor is committed to meeting designers’ needs via mass customization.
All our manufacturing facilities have this capability. We'll support you with
the best applications group in the industry. Thousands of designers
worldwide have taken advantage of custom Vicor DC-DC converters and
power supplies designs. You can, too.
Web ExpressCode: cmds
CONFIGURATOR
Design your own DC-DC converter or configurable power supply – online – anytime using Vicor's
custom configurators. Designs that you create are saved in your "My Designs" account
for future review and editing. You only have to register once to access all Vicor's custom
configurators via the "Single Sign-On" feature.
Do-It-Yourself Power Design Custom Design Systems
SINGLE SIGN-ON
My Designs
An online tool for storing your
designs you create
Custom
Module Design System
Design your own DC-DC converters
at vicorpower.com
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
55
Web ExpressCode: quality
MASS CUSTOMIZATION
Computer Integrated Manufacturing Andover, MA Facilities
Vicor manufactures its DC-DC converters and configurable products at
an exceptional facility in Andover, Massachusetts, USA. There is no
power conversion manufacturing facility in the world quite like it. Only at
Vicor are you able to get the exact power solution that you want
whether it's one unit or one million units. Vicor built this 230,000 sq. ft.
manufacturing facility around a model of true mass-customization and
total quality.
Computer Integrated Manufacturing (CIM) makes it all possible. Once
underway, every module in the manufacturing process is recognized by a
unique number assigned to it. It's tracked throughout its build, station to
station, and is required to successfully pass all electrical, extended
environmental, and mechanical requirements at every point of the
manufacturing process. If it doesn't pass, the CIM system will not allow
the module to proceed to the next station.
Also unique to Vicor is individual final test data for each
converter available on vicorpower.com for every I-, H-, and
M-Grade module. Each module undergoes extensive post-
production environmental stress screening before shipment
to verify compliance with Vicor's high-quality performance
standards and to eliminate early-life failures. This constant
checking and monitoring at each stage of manufacture
ensures the highest levels of quality and reliability for our
customers.
Since 1993, Vicor has been ISO-9001 certified and is
engaged in proactive continuous-improvement programs.
Quality, reliability, and performance are integrated into every
aspect of our products. Our goal is your total satisfaction.
ISO 9001
Certified since 1993
U.S. & CANADA ONLY: 800-735-6200 FOR OTHER PHONE NUMBERS, SEE BACK COVER
VICORPOWER.COM
56
VICORPOWER.COM
Use the Power of the Web vicorpower.com
Develop your power solution by going to vicorpower.com. It's one of the
premiere power-conversion sites on the web. Vicorpower.com is especially
designed to get you the information you need quickly. And, through Vicor's
unique mass-customization capabilities, we can provide you with exactly the
power specifications you want at a price that's always affordable. Whether it's
converters, user-configurable or custom power, Vicor has the solution.
Here’s what you’ll find on vicorpower.com
Product configurators and a converter simulator
that specifically analyzes your best options
Technical seminars with synchronized video, PowerPoint,
and access to related resources
Webcasts on technical subjects of interest
Application demonstrations
Online catalog with direct links to product pages, data sheets,
and mechanical drawings
Dedicated quality site with detailed factory tour and a custom
quality report generator
Technical articles that cover a huge range of applications challenges
Data sheets and mechanical drawings for all Vicor products
vicorpower.com
Experience one of the
premiere power conversion sites on the web
Feel free to contact Applications for any technical question you may have at 1 (800) 927-9474 or Vicor Express
for price and delivery at 1 (800) 735-6200. For all other phone numbers, please see back cover.
DATA SHEETS MECHANICAL DRAWINGS VIDEOS CONFIGURATORS
57
Web ExpressCode: Web ExpressCode: Web ExpressCode: Web ExpressCode: support
SUPPORT
Powerful Experience When It Counts Applications and Customer Support Specialists
Here’s how we can help
Contact the Vicor Applications Group or our Customer Support Specialists and experience Vicor's
special commitment to your design. There’s one goal at Vicor: to help you optimize your power
design faster and always affordably. Our worldwide applications engineering staff is ready to give
technical support, and our Customer Support Specialists will provide price and delivery
information. They can easily be reached via email, at vicorexp@vicr.com or apps@vicr.com.
Applications Engineers
Evaluate specific customer design issues and offer a wide range of
component-based power solutions
Answer technical questions by phone, fax, email, or via the Vicor website.
Assist with component-based power system design
Support user needs through visits to your facilities
Customer Support Specialists
Provide price and delivery information
Help select the most appropriate product for your application
Can arrange a visit to your site by a Vicor Applications Engineer
or Sales Representative
Fulfill literature requests
Process purchase order requirements
Provide order status information
Vicor accepts VISA, MasterCard, American Express, a bank check or money order; an open account with established credit,
or COD. Most products are covered by a two-year limited warranty. See vicorpower.com/warranty for the complete warranty
statement. All prices shown are single quantity unless otherwise noted. F.O.B. Andover, Massachusetts, and Sunnyvale,
California, USA. For international pricing, please contact your local Vicor office or distributor.
You’ll also have access to Vicor’s
online power conversion design tools.
These range from easy-to-use
standard product configurators to
real-time custom design generators.
USA
vicorpower.com
Vicor Corporation
(Corporate Headquarters)
25 Frontage Road
Andover, MA 01810-5413
For General Information
Tel: 978-470-2900
Fax: 978-475-6715
For Technical Support
Tel: 800-927-9474
Fax: 978-749-3341
E-mail: apps@vicorpower.com
For Sales Support (Vicor Express)
In U.S. and Canada: 800-735-6200
Fax: 978-475-6715
E-mail: vicorexp@vicorpower.com
Vicor Corporation
Lombard, IL 60148
Tel: 630-769-8780
Fax: 630-769-8782
Vicor, Westcor Division
Sunnyvale, CA
Tel: 408-522-5280
Fax: 408-774-5555
Picor Corporation
Slatersville, RI
Tel: 401-235-1100
Fax: 401-235-1117
picorpower.com
Europe
vicoreurope.com
Vicor France
Tel: +33 1 34 52 18 30
France: 0800 419 419
Benelux: 00 800 419 419 20
Fax: +33 1 34 52 28 30
E-mail: vicorfr@vicorpower.com
Vicor Germany
Tel: +49 89 962 439 0
Germany: 0800 018 29 18
Denmark: 00800 8426 7000
Austria: 0800 20 37 27
Fax: +49 89 962 439 39
E-mail: vicorde@vicorpower.com
Vicor Italy
Tel: +39 02 22 47 23 26
800 899 677
Fax: +39 02 22 47 31 66
E-mail: vicorit@vicorpower.com
Vicor UK
Tel: +44 1276 678222
UK: 0800 980 8427
Sweeden: 020 794 143
Fax: +44 1276 681269
E-mail: vicoruk@vicorpower.com
Asia-Pacific
Vicor Japan Co., Ltd.
Tel: +81-3-5487-3880
Fax: +81-3-5487-3885
vicr.co.jp
Vicor Hong Kong
Tel: +852-2956-1782
Fax: +852-2956-0782
vicor-asia.com
In Latin America:
Call the number below and
ask the operator to connect
you to 800-735-6200.
Argentina: 800-555-4288
Brazil: 0800-890-0288
Mexico: 011 52 333 647 7881
Vicor Integration Architects (VIAs)
Aegis Power Systems
Murphy, NC
Tel: 828-837-4029
Fax: 828-837-4106
e-mail: aegis@aegispower.com
www.aegispower.com
Convertec Corporation
Roseville, Minnesota
Tel: 651-604-0289
Fax: 651-604-0293
e-mail: eswanson@vicr.com
Freedom Power Systems
Cedar Park, TX
Tel: 512-259-0941
Fax: 512-259-4438
e-mail: sales@freedompower.com
www.freedompower.com
Granite Power Technologies
Manchester, NH
Tel: 603-623-3222
Fax: 603-627-3222
e-mail: tduff@granitepower.com
www.granitepower.com
Mission Power Solutions
Oceanside, CA
Tel: 760-631-6846
Fax: 760-631-6972
e-mail: sales@mpwrs.com
www.mpwrs.com
Northwest Power Integrations
Milwaukie, OR
Tel: 503-652-6161
Fax: 503-652-6868
e-mail: info@npi-inc.com
www.npi-inc.com
©Vicor Corporation 2006 Printed in USA, 32765, 5/06
