WISE-4012E 6-ch Input/Output IoT Wireless I/O Module for IoT Developers Features 2.4 GHz IEEE 802.11b/g/n WLAN 2-ch 0 ~ 10V Input, 2-ch DI, and 2-ch Relay Output Includes WebAccess with demo project for developer Includes extension board for simulating sensor status Includes micro USB cable for power input Supports Modbus/TCP with RESTful web service Supports wireless client and server mode that can be accessed directly without AP or router Supports mobile device web configuration with HTML5 without the platform limitation Supports file-based cloud storage and local logging with time stamp SRRC R&TTE Introduction The Advantech WISE IoT Developer Kit is a complete hardware & software solution to help users develop IoT applications and simulate their projects in the simplest way. The WISE IoT Developer Kit provides everything you need to get going: a WISE-4012E 6-ch universal input or output wireless Ethernet I/O module, and developer kit including: WebAccess 8.0 with open interfaces for intelligent application developer, extension board for simulating sensor status, a micro USB cable for power input, and a screwdriver for wiring. The WISE4012E has an integrated Wi-Fi interface with AP mode and web configuration which can be accessed by mobile device directly. Data can be logged in the I/O module and then automatically pushed to the file-based cloud. IoT Developer Kit Product Concept: Data A-P-P Data Data Processing Publishing Data Acquisition Connect to an extension board Connect to end devices Wi-Fi Wi-Fi Power input with USB cable, easy to implement <AI> <AI> TEMP. SCALE WISE-4012E (x1) Extension Board (x1) USB Cable (x1) Screwdriver (x1) WebAccess (x1) Application Scenario 2 Application Scenario 1 PH SCALE <DI> FLOW STATUS Power input with USB cable, easy to implement <Relay> <Relay> <DI> VALVE STATUS FAN SWITCH LED LIGHT (x2), to be switch on/off with WISE built in relay output CURTAIN SWITCH AI KNOB (x2), to provide voltage signals to WISE DI SWITCH (x2), to provide switch status signals to WISE Wireless IoT Sensing Devices All product specifications are subject to change without notice. Last updated: 27-Jun-2018 WISE-4012E Advantech WebAccess 8.0 Specifications Voltage Input Channel Resolution Sampling Rate Accuracy Input Type and Range Input Impedance WebAccess Cloud Architecture 2 12-bit 10 Hz (Total) 0.1 VDC 0 ~ 10 V 100 k Digital Input Channels Logic level 2 Dry Contact 0: Open 1: Close to GND Supports 3 kHz Counter Input (32-bit + 1-bit overflow) Keep/Discard Counter Value when Power-off Supports 3 kHz Frequency Input Supports Inverted DI Status WebAccess is a 100% web based HMI and SCADA software with private cloud software architecture. WebAccess can provide large equipment vendors, SIs, and Enterprises access to and manipulation of centralized data to configure, change/update, or monitor their equipment, projects, and systems all over the world using a standard web browser. Also, all the engineering works, such as: database configuration, graphics drawing and system management and the troubleshooting can be operated remotely. This can significantly increase the efficiency of maintenance operations and reduce maintenance costs. Business Intelligence Dashboard WebAccess 8.0 provides an HTML5 based Dashboard as the next generation of WebAccess HMI. System integrators can use Dashboard Editor to create the customized information page by using analysis charts and diagrams which are called widgets. Ample widgets have been included in the built-in widget library, such as trends, bars, alarm summary, maps...etc. After the dashboard screens have been created, end user can view the data by Dashboard Viewer in different platforms, like Explorer, Safari, Chrome, and Firefox for a seamless viewing experience across PCs, Macs, tablets and smartphones. Relay Output Open Interfaces Channels 2 (Form A) Contact Rating 120 VAC @ 0.5 A (Resistive Load) 30 VDC @ 1A Isolation (b/w coil & contacts) 1,500 Vrms Relay On Time 10 ms Relay Off Time 7 ms Insulation Resistance 1 G min. @ 500 VDC Maximum Switching 60 operations/minute Supports Pulse Output Supports High-to-Low and Low-to-High Delay Output WebAccess has three interfaces for different uses. First, WebAccess provides a Web Service interface for partners to integrate WebAccess data into APPs or application system. Second, a pluggable widget interface has been opened for programmer to develop their widget and run on WebAccess Dashboard. Last, WebAccess API, a DLL interface for programmer to access WebAccess platform and develop Windows applications. With these interfaces, WebAccess can act as an IoT platform for partners to develop IoT applications in various vertical markets. Environment Operating Temperature Storage Temperature Operating Humidity Storage Humidity -25 ~ 70C (-13 ~ 158F) -40 ~ 85C (-40 ~ 185F) 20 ~ 95% RH (non-condensing) 0 ~ 95% RH (non-condensing) WebAccess integrates real-time data on each geographical site with Google Maps and GPS location tracking. For remote monitoring, users can intuitively view the current energy consumption on each building, production rate on each field or traffic flow on the highway together with alarm status. By right-clicking on Google Maps or entering the coordinate of the target, users can create a marker for the target and associate the real-time data of three sites with a display label. Furthermore, this function also integrates with GPS modules to track the location of the marker in Google Maps and allows it to be used in vehicle systems. Ample Driver Support General WLAN Connectors Watchdog Timer Google Maps and GPS Tracking Integration IEEE 802.11b/g/n 2.4GHz Plug-in screw terminal block (I/O) System (1.6 second) and Communication (programmable) Certification CE, FCC, R&TTE, NCC, SRRC, RoHS, ANATEL Dimensions (W x H x D) 80 x 139 x 25 mm Enclosure PC Power Input Micro-B USB 5 VDC Power Consumption 1.5 W @ 5 VDC Supports User Defined Modbus Address Supports Data Log Function Up to 10,000 samples with time stamp Supported Protocols Modbus/TCP, TCP/IP, UDP, DHCP, and HTTP Supports RESTful Web API in JSON format Supports Web Server in HTML5 with JavaScript & CSS3 Supports System Configuration Backup and User Access Control WebAccess supports hundreds of devices. In addition to Advantech I/Os and controllers, WebAccess also supports all major PLCs, controllers and I/Os, like Allen Bradley, Siemens, LonWorks, Mitsubushi, Beckhoff, Yokogawa etc. WebAccess can easily integrate all devices in one SCADA. All of these device drivers are integrated into WebAccess and free of charge. For a complete list of WebAccess drivers, refer to webaccess.advantech.com. Distributed SCADA Architecture with Central Database Server SCADA nodes run independent of any other node. Each SCADA node communicates to automation equipment using communication drivers supplied with Advantech WebAccess. The Project Node is a centralized database server of configuration data. A copy of the database and graphics of all SCADA nodes is kept on the Project Node. The historical data is also stored in the database in project node. Open Data Connectivity Advantech WebAccess exchanges online data with 3rd party software in real-time by supporting OPC UA/DA, DDE, Modbus and BACnet Server/Client. It supports SQL, Oracle, MySQL, and MS Access for offline data sharing. Ordering Information Software Requirements WISE-4012E-AE-WA Operating System WISE-4012E IoT Developer Kit with WebAccess Hardware Windows XP (SCADA Node Only), Windows 7 SP1, Windows 8 Professional, Windows Server 2008 R2 or later Intel Atom or Celeron. Dual Core processors or higher recommended 2GB RAM minimum, more recommended 30GB or more free disk space Online Download www.advantech.com/products