Commercial CCR-33
Miniature DC-18GHz SPDT Switch
Failsafe
The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to
switch a microwave signal from a common input to either of two outputs. The characteristic
impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA
connectors.
The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is
compatible with the two most common mounting hole patterns. The CCR-33 series switch is
interchangeable with a variety of
switches.
3000
800
400
200
80
40
10
)sttaW( WC rewoP
0.1 1.0 4.0 10 18
Frequency GHz
Standard SMA Connectors
Specifications
RF Contacts:Break before make
ActuatorVoltage (VDC) 20O C 12 15 28
Current (mA)200160 90
Switching Time:20 msec max
Connectors:SMA (f)
Weight:1.65 oz. max
Temperature Range:-40O C to +65O C (Operating)
Shock:MIL-STD-202 Method 213, Condition D (500G Non Operating)
Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)
Humidity:Moisture Seal Available
Typical Contact Life: 5 Million Cycles
RF Power Handling
SpecificationsDC-6 GHz6-12 GHz12-18 GHz
VSWR (max)1.25:11.40:11.50:1
Insertion Loss (max) 0.20 dB 0.40 dB 0.50 dB
Isolation (min)70.0 dB 60.0 dB 60.0 dB
Typical Performance
15
25
ssoL nruteR
0.01 18.0
Frequency GHz
0.01 18.0
Frequency GHz
0.0
0.4
Bd LI
Bd noitalosI
90
80
70
60
Tel: (800) 351-7368
www.teledynecoax.com
email: coax@teledyne.com
Specifications subject to change without notice.
10/2007
Insertion Loss Repeatability (1 Million Cycles):
DC to 6 GHz: 0.05 dB
DC to 20 GHz: 0.1 dB