BTA208X-1000B@127 - NXP SEMICONDUCTORS

1.5SMC Series

www.vishay.com Vishay General Semiconductor

Revision: 24-Jan-2019 1Document Number: 88303

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount TRANSZORB®

Transient Voltage Suppressors

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g. 1.5SMC220CA).

Electrical characteristics apply in both directions.

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 1500 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3 or P/NHM3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lightning

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

MECHANICAL DATA

Case: SMC (DO-214AB)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/N-M3 - halogen-free, RoHS-compliant, commercial

grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

Base P/NHM3_X - halogen-free, RoHS-compliant, and

AEC-Q101 qualified

(“_X” denotes revision code e.g. A, B, ...)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3, M3, HE3, and HM3 suffix meets JESD 201 class 2

whisker test

Polarity: for uni-directional types the band denotes cathode

end, no marking on bi-directional types

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal

PRIMARY CHARACTERISTICS

VWM (uni-directional) 5.8 V to 459 V

VWM (bi-directional) 5.8 V to 185 V

VBR (uni-directional) 6.8 V to 540 V

VBR (bi-directional) 6.8 V to 220 V

PPPM 1500 W

PD6.5 W

IFSM (uni-directional only) 200 A

TJ max. 150 °C

Polarity Uni-directional, bi-directional

Package SMC (DO-214AB)

SMC (DO-214AB)

Available

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) PPPM 1500 W

Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) IPPM See next table A

Power dissipation on infinite heatsink at TA = 50 °C PD6.5 W

Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) IFSM 200 A

Operating junction and storage temperature range TJ, TSTG -65 to +150 °C

1.5SMC Series

www.vishay.com Vishay General Semiconductor

Revision: 24-Jan-2019 2Document Number: 88303

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Pulse test: tp  50 ms

(2) Surge current waveform per fig. 3 and derate per fig. 2

(3) All terms and symbols are consistent with ANSI/IEEE CA62.35

(4) For bi-directional types with VR of 10 V and less, the ID limit is doubled

(5) VF = 3.5 V at IF = 100 A (uni-directional only)

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PART

NUMBER

DEVICE

MARKING

CODE

BREAKDOWN

VOLTAGE

VBR AT IT (1)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

VWM

(V)

MAXIMUM

REVERSE

LEAKAGE

AT VWM

ID (4)

(μA)

MAXIMUM

PEAK

PULSE

CURRENT

IPPM (2)

(A)

MAXIMUM

CLAMPING

VOLTAGE

AT IPPM

VC (V)

MAXIMUM

TEMPERATURE

COEFFICIENT

OF VBR

(%/°C)

UNI BI MIN. MAX.

1.5SMC6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 143 10.5 0.057

1.5SMC7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 133 11.3 0.061

1.5SMC8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 124 12.1 0.065

1.5SMC9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 112 13.4 0.068

1.5SMC10A 10A 10C 9.50 10.5 1.0 8.55 10 103 14.5 0.073

1.5SMC11A 11A 11C 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075

1.5SMC12A 12A 12C 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078

1.5SMC13A 13A 13C 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081

1.5SMC15A 15A 15C 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084

1.5SMC16A 16A 16C 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086

1.5SMC18A 18A 18C 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089

1.5SMC20A 20A 20C 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090

1.5SMC22A 22A 22C 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092

1.5SMC24A 24A 24C 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.090

1.5SMC27A 27A 27C 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096

1.5SMC30A 30A 30C 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097

1.5SMC33A 33A 33C 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098

1.5SMC36A 36A 36C 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099

1.5SMC39A 39A 39C 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100

1.5SMC43A 43A 43C 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101

1.5SMC47A 47A 47C 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101

1.5SMC51A 51A 51C 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102

1.5SMC56A 56A 56C 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103

1.5SMC62A 62A 62C 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104

1.5SMC68A 68A 68C 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104

1.5SMC75A 75A 75C 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105

1.5SMC82A 82A 82C 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105

1.5SMC91A 91A 91C 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106

1.5SMC100A 100A 100C 95.0 105 1.0 85.5 1.0 10.9 137 0.106

1.5SMC110A 110A 110C 105 116 1.0 94.0 1.0 9.9 152 0.107

1.5SMC120A 120A 120C 114 126 1.0 102 1.0 9.1 165 0.107

1.5SMC130A 130A 130C 124 137 1.0 111 1.0 8.4 179 0.107

1.5SMC150A 150A 150C 143 158 1.0 128 1.0 7.2 207 0.106

1.5SMC160A 160A 160C 152 168 1.0 136 1.0 6.8 219 0.108

1.5SMC170A 170A 170C 162 179 1.0 145 1.0 6.4 234 0.108

1.5SMC180A 180A 180C 171 189 1.0 154 1.0 6.1 246 0.108

1.5SMC200A 200A 200C 190 210 1.0 171 1.0 5.5 274 0.108

1.5SMC220A 220A 220C 209 231 1.0 185 1.0 4.6 328 0.108

1.5SMC250A 250A - 237 263 1.0 214 1.0 4.4 344 0.110

1.5SMC300A 300A - 285 315 1.0 256 1.0 3.6 414 0.110

1.5SMC350A 350A - 333 368 1.0 300 1.0 3.1 482 0.110

1.5SMC400A 400A - 380 420 1.0 342 1.0 2.7 548 0.110

1.5SMC440A 440A - 418 462 1.0 376 1.0 2.5 602 0.110

1.5SMC480A 480A - 456 504 1.0 408 1.0 2.28 658 0.110

1.5SMC510A 510A - 485 535 1.0 434 1.0 2.15 698 0.110

1.5SMC540A 540A - 513 567 1.0 459 1.0 2.03 740 0.110

1.5SMC Series

www.vishay.com Vishay General Semiconductor

Revision: 24-Jan-2019 3Document Number: 88303

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Mounted on minimum recommended pad layout

Notes

(1) _A is available for 1.5SMC6.8(C)A to 1.5SMC220(C)A, AEC-Q101 qualified

(2) _B is available for 1.5SMC250A to 1.5SMC540A, AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Typical thermal resistance, junction to ambient air (1) RJA 75 °C/ W

Typical thermal resistance, junction to leads RJL 15

ORDERING INFORMATION (Example)

PREFERRED P/N

UNIT

WEIGHT

(g)

VOLTAGE RANGE (V) PACKAGE

CODE

BASE

QUANTITY DELIVERY MODE

UNI - BI -

1.5SMC6.8A-E3/57T 0.211 6.8 to 220 6.8 to 220 57T 850 7" diameter plastic tape and reel

1.5SMC6.8A-M3/57T 0.211 6.8 to 540 6.8 to 220 57T 850 7" diameter plastic tape and reel

1.5SMC6.8A-E3/9AT 0.211 6.8 to 220 6.8 to 220 9AT 3500 13" diameter plastic tape and reel

1.5SMC6.8A-M3/9AT 0.211 6.8 to 540 6.8 to 220 9AT 3500 13" diameter plastic tape and reel

1.5SMC6.8AHE3_A/H (1)

0.211 6.8 to 220 6.8 to 220 H 850 7" diameter plastic tape and reel

1.5SMC6.8AHM3_A/H (1)

1.5SMC6.8AHE3_A/I (1)

0.211 6.8 to 220 6.8 to 220 I 3500 13" diameter plastic tape and reel

1.5SMC6.8AHM3_A/I (1)

1.5SMC250AHM3_B/H (2) 0.211 250 to 540 - H 850 7" diameter plastic tape and reel

1.5SMC250AHM3_B/I (2) 0.211 250 to 540 - I 3500 13" diameter plastic tape and reel

0.1

100

0.31 x 0.31" (8.0 x 8.0 mm)

Copper Pad Areas

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

PPM

- Peak Pulse Power (kW)

td - Pulse Width (s)

0 25 50 75 100

100

125 150 175 200

TJ - Initial Temperature (°C)

Peak Pulse Power (PPP) or Current (IPP)

Derating in Percentage, %

1.5SMC Series

www.vishay.com Vishay General Semiconductor

Revision: 24-Jan-2019 4Document Number: 88303

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Pulse Waveform

Fig. 4 - Typical Junction Capacitance Uni-Directional

Fig. 5 - Typical Transient Thermal Impedance

Fig. 6 - Maximum Non-Repetitive Forward Surge Current

Uni-Directional Use Only

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

100

150

= 10 µs

Peak Value

IPPM

Half Value -

IPPM

10/1000 µs Waveform

as defined by R.E.A.

01.0 2.0 3.0 4.0

t - Time (ms)

PPM

- Peak Pulse Current, % I

RSM

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

100

1000

10 000

20 000

101 100 400

Uni-Directional

Bi-Directional

= 25 °C

f = 1.0 MHz

sig

= 50 mVp-p

Measured at

Zero Bias

, Measured

at Stand-Off

Voltage V

- Junction Capacitance (pF)

VWM - Reverse Stand-Off Voltage (V)

0.1

1.0

100

0.001 0.01 0.1 100 10 1 1000

tp - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

100

200

TJ = TJ max.

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

0.260 (6.60)

0.280 (7.11)

0.006 (0.152)

0.012 (0.305)

0.030 (0.76)

0.060 (1.52)

0.008 (0.2)

0.305 (7.75)

0.320 (8.13)

0.220 (5.59)

0.246 (6.22)

0.079 (2.06)

0.103 (2.62)

0.114 (2.90)

0.126 (3.20)

Cathode Band

SMC (DO-214AB)

0.320 REF.

Mounting Pad Layout

0 (0)

0.185 (4.69)

MAX.

0.126 (3.20)

MIN.

0.060 (1.52)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.