RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES * Fully conforms to the requirements of MIL-PRF-55342 * Established reliability - Verified failure rate; M, P, R, S and T levels * Operating temperature range is - 55 C to + 150 C * 100 % Group A screening per MIL-PRF-55342 * Termination Style B - Tin/Lead wraparound over nickel barrier STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL MIL-PRF-55342 STYLE MIL SPEC. SHEET TERM. POWER RATING P70 C W MAXIMUM OPERATING VOLTAGE CHAR. TOLERANCE % RESISTANCE RANGE RCWPM-0502 RM0502 01 B 0.02 40 M K, M 2 to 10 1 to 10 1 - 9.1 10 - 22M RCWPM-550 RM0505 02 B 0.055 40 K, M 1 to 10 1 - 22M RCWPM-5100 RM1005 03 B 0.10 40 K, M 1 to 10 1 - 22M RCWPM-5150 RM1505 04 B 0.15 40 K, M 1 to 10 1 - 22M RCWPM-7225 RM2208 05 B 0.225 40 K, M 1 to 10 1 - 22M RCWPM-575 RM0705 06 B 0.10 50 K, M 1 to 10 1 - 22M RCWPM-1206 RM1206 07 B 0.25 100 K, M 1 to 10 1 - 22M 1 - 22M RCWPM-2010 RM2010 08 B 0.801) 150 K, M 1 to 10 RCWPM-2512 RM2512 09 B 1.01) 200 K, M 1 to 10 1 - 22M RCWPM-1100 RM1010 10 B 0.501) 75 K, M 1 to 10 1 - 22M RCWPM-0402 RM0402 11 B 0.04 25 K, M 1 to 10 1 - 22M RCWPM-0603 RM0603 12 B 0.07 50 K, M 1 to 10 1 - 22M Note: 1. Power rating based on a ceramic test board, see appropriate Mil Slash Sheet for power ratings based on a fiber test board. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part number format) M 5 5 3 MIL STYLE CHARACTERISTICS D55342 applies to Style 07 (RM1206) only. K = 100 ppm M = 300 ppm 4 2 SPEC SHEET M 0 2 B TERMINATION VALUE AND STYLE TOLERANCE 1 0 E FAILURE RATE C = Non-ER (see Standard B = Pre-tinned (see Tolerance Nickel Barrier, and Multipliers M = 1.0 %/1000 hours Electrical table) wraparound Specifications P = 0.1 %/1000 hours table) R = 0.01 %/1000 hours S = 0.001 %/1000 hours T = Space Level M55342 applies to all other styles. 0 R W PACKAGING B SPECIAL Blank = Standard TP = Tin/Lead, (Dash Number) T/R (Full) (up to 1 digits) S3 = Tin/Lead, T = Space T/R (1000 pieces) Level (-98) WB = Tin/Lead, Tray S2 = Tin/Lead, T/R (500 pieces) S6 = Tin/Lead, T/R (300 pieces) Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) M55342 M 02 B 10E0 R WB MIL STYLE CHARACTERISTICS SPEC SHEET TERMINATION STYLE VALUE AND TOLERANCE FAILURE RATE PACKAGING CODE www.vishay.com 130 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010 Revision: 29-Aug-07 RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale DIMENSIONS in inches [millimeters] D C B A MIL-PRF-55342 STYLE RCWPM-0502 RM0502 01 RCWPM-550 RM0505 02 RCWPM-5100 RM1005 03 RCWPM-5150 RM1505 04 RCWPM-7225 RM2208 05 RCWPM-575 RM0705 06 RCWPM-1206 RM1206 07 RCWPM-2010 RM2010 08 RCWPM-2512 RM2512 09 RCWPM-1100 RM1010 10 RCWPM-0402 RM0402 11 RCWPM-0603 RM0603 12 Rated Power in % VISHAY DALE MODEL MIL. SPEC. SHEET E A (Length) B (Width) C (Height) D (Top Term) E (Bottom Term) 0.055 0.005 [1.40 0.13] 0.055 0.005 [1.40 0.13] 0.105 0.005 [2.67 0.13] 0.155 0.005 [3.94 0.13] 0.230 0.005 [5.84 0.13] 0.080 0.005 [2.03 0.13] 0.125 0.005 [3.18 0.13] 0.197 0.006 [5.00 0.15] 0.250 0.006 [6.35 0.15] 0.105 0.005 [2.67 0.13] 0.039 0.003 [0.99 0.08] 0.063 0.005 [1.60 0.13] 0.023 0.003 [0.58 0.08] 0.050 0.005 [1.27 0.13] 0.050 0.005 [1.27 0.13] 0.050 0.005 [1.27 0.13] 0.075 0.005 [1.91 0.13] 0.050 0.005 [1.27 0.13] 0.063 0.005 [1.60 0.13] 0.098 0.005 [2.49 0.13] 0.124 0.005 [3.15 0.13] 0.100 0.005 [2.54 0.13] 0.020 0.003 [0.51 0.08] 0.032 0.005 [0.81 0.13] 0.015 0.003 [0.38 0.08] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.013 0.003 [0.33 0.08] 0.018 0.005 [0.46 0.13] 0.010 0.005 [0.25 0.13] 0.010 0.005 [0.25 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.010 0.005 [0.25 0.13] 0.012 0.005 [0.31 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.010 0.005 [0.25 0.13] 0.015 0.005 [0.38 0.13] 120 100 80 CAGE CODE: 91637 and SH903 60 40 20 0 - 55 - 25 0 25 Derating 50 75 100 125 150 175 70 Ambient Temperature in C RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE 1% D E F Examples: Document Number: 31010 Revision: 29-Aug-07 2% G H T 5% J K L 11D3 = 11.3 1 % 10E0 = 10 k 1 % 332D = 332 1 % 2F21 = 2.21 M 1 % 51G0 = 51 2 % 10H0 = 10 k 2 % 33H0 = 33 k 2 % 22T0 = 22 M 2 % 10 % M N P MULTIPLIER 1 1000 1 000 000 15J0 = 15 5 % 10K0 = 10 k 5 % 560K = 560 k 5 % 8L20 = 8.2 M 5 % 10M0 = 10 10 % 10N0 = 10 k 10 % 2P70 = 2.7 M 10 % 8P20 = 8.2 M 10 % For technical questions, contact: ff2aresistors@vishay.com VALUE RANGE (OHMS) 1 - 9xx 1K - 9xxK 1M - 22M www.vishay.com 131 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1