LITE-ON SEMICONDUCTOR L02ESD5V0F6-5 STAND-OFF VOLTAGE- 5.0 Volts POWER DISSIPATION - 25 WATTS UNIDIRECTIONAL ESD PROTECTION DIODE GENERAL DESCRIPTION SOT563 The L02ESD5V0F6-5 is a low capacitance 5-fold ESD array in the ultra small SOT666 plastic package designed to protect up to five transmission or data lines from the damage caused by Electrostatic Discharge(ESD). B C SOT563 MIN. MAX. DIM. FEATURES F Uni-directional ESD protection of up to five lines. Bi-directional ESD protection of up to four lines. Max.peak pulse power : Ppp = 25W at tp = 8/20 us ESD protection > 20 KV IEC 61000-4-2, level 4 ( ESD ), > 15KV ( air ) ; > 8KV ( contact ). IEC 61000-4-5 ( surge ); Ipp = 2.5A at tp = 8/20 us. Low clamping voltage; Vcl < 12V at Ipp = 2.5A Low capacitance device. 0.50 B 1.50 1.70 C 1.10 1.30 0.60 D 1.00 (Typ.) E 0.50 (Typ.) 1.50 1.70 F 0.17 0.27 G All Dimensions in millimeter A G E A D PIN ASSIGNMENT APPLICATION Computers and peripherals. Communication system. Cellular handsets and accessories. Audio & video equipment. Portable electronics. MECHANICAL DATA 1 Cathode 1 2 Common Anode 3 Cathode 2 4 Cathode 3 5 Cathode 4 6 Cathode 5 Marking & Orientation Case Material: "Green" molding compound UL flammability classification 94V-0 (No Br.Sb, Cl) Terminals: Lead Free Plating (Matte Tin Finish) Component in accordance to RoHs 2002/95/EC BF5 MAXIMUM RATINGS (Tj= 25 unless otherwise noticed) Rating Symbol Value Unit PPPM 25 W TJ -55 to + 150 Tstg -55 to + 150 TL 260 Peak pulse Power ( 8/20us Waveform ) notes 1 and 2 Operating Junction Temperature Range Storage Temperature Range Soldering Temperature, t max = 10s NOTE;1.Non-repetitive current pulse 8/20 us exponentially decaying waveform. 2.Measured from any of pins 1,3,4,5 or 6 to pin2. ELECTRICAL CHARACTERISTICS (Tj= 25 unless otherwise noticed) Parameter Symbol Conditions MIn Max Unit Reverse standoff voltage VDRM --- --- 5.0 V Reverse leakage current IRM VDRM = 5 V --- 25 nA Breakdown voltage VBR IR = 1 mA 6.4 7.2 V Diode capacitance CJ VR = 0 V , f = 1MHz --- 19 pF Clamping voltage VCL IPP = 1A --- 10 V Clamping voltage VCL IPP = 2.5A --- 12 V REV. 2, Oct-2010, KSIR12 RATING AND CHARACTERISTIC CURVES L02ESD5V0F6-5 120 100% 80 Percent of Peak Pulse Current % Percent of Peak Pulse Current (%) 100% Ipp: 8us -1 e 50% Ipp: 20us 40 90% 10% 0 10 20 30 40 Time (us) 60 ns Figure 1. 8/20 us pulse waveform according to IEC 61000-4-5 100 Time (ns) tr = 0.7 ~1 ns 30 ns 0 Figure 2. ESD pulse waveform according to IEC 61000-4-2 TJ =25, tp (us) = 8/20 us exponentially decay waveform 1.2 0.8 Ppp / Ppp (25) Peak pulse Power (W) Ppp Ppp (25) 10 -1 e 0.4 0 1 1 10 100 1000 0 10000 50 100 150 200 Junction Temperature () Figure 4. Peak pulse power versus TJ Pulse Time (us) Figure 3. Power Dissipation versus Pulse Time 10.0 30 18 IR / IR (25) Capacitance (pF) 24 12 1.0 6 TJ =25, f=1MHz, Vosc=100mV 0 0 1 2 3 4 5 0.1 0 Reverse Voltage (V) Figure 5. Typical Junction Capactiance 30 60 90 120 150 Junction Temperature () Figure 6. Reverse Leakage Current versus TJ RATING AND CHARACTERISTIC CURVES L02ESD5V0F6-5 I/O1 +/-8KV ESD Contact discharge V (i/o) Figure 7. ESD Test Configuration V (i/o) Figure 8. Clamped +8 kV ESD voltage waveform V (i/o) Figure 9. Clamped -8 kV ESD voltage waveform Legal Disclaimer Notice L02ESD5V0F6-5 Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.