L02ESD5V0F6-5
GENERAL DESCRIPTION
The L02ESD5V0F6-5 is a low capacitance 5-fold ESD array in the
ultra small SOT666 plastic package designed to protect up to
five transmission or data lines from the damage caused by
Electrostatic Discharge(ESD).
FEATURES
Uni-directional ESD protection of up to five lines.
Bi-directional ESD protection of up to four lines.
Max.peak pulse power : Ppp = 25W at tp = 8/20 us
ESD protection > 20 KV
IEC 61000-4-2, level 4 ( ESD ), > 15KV ( air ) ; > 8KV ( contact ).
IEC 61000-4-5 ( surge ); Ipp = 2.5A at tp = 8/20 us.
Low clamping voltage; Vcl < 12V at Ipp = 2.5A
Low capacitance device.
APPLICATION
Computers and peripherals.
Communication system.
Cellular handsets and accessories.
Audio & video equipment.
Portable electronics.
MECHANICAL DATA
Case Material: "Green" molding compound UL flammability
classification 94V-0 (No Br.Sb, Cl)
Terminals: Lead Free Plating (Matte Tin Finish)
Component in accordance to RoHs 2002/95/EC
UNIDIRECTIONAL
ESD PROTECTION DIODE
STAND-OFF VOLTAGE-
5.0
Volts
POWER DISSIPATION -
25
WATTS
SEMICONDUCTOR
LITE-ON
REV. 2, Oct-2010, KSIR12
MAXIMUM RATINGS
(Tj= 25 unless otherwise noticed)
℃
℃℃
℃
ELECTRICAL CHARACTERISTICS
(Tj= 25 unless otherwise noticed)
℃
℃℃
℃
Rating Symbol Value Unit
Peak pulse Power ( 8/20us Waveform ) notes 1 and 2 P
PPM
25 W
Operating Junction Temperature Range T
J
-55 to + 150
℃
℃℃
℃
Storage Temperature Range Tstg -55 to + 150
℃
℃℃
℃
Soldering Temperature, t max = 10s T
L
260
℃
℃℃
℃
Parameter Symbol Conditions MIn Max Unit
Reverse standoff voltage V
DRM
--- --- 5.0 V
Reverse leakage current I
RM
V
DRM
= 5 V --- 25 nA
Breakdown voltage V
BR
I
R
= 1 mA 6.4 7.2 V
Diode capacitance C
J
V
R
= 0 V , f = 1MHz --- 19 pF
Clamping voltage V
CL
I
PP
= 1A --- 10 V
Clamping voltage V
CL
I
PP
= 2.5A --- 12 V
NOTE;1
.
Non-repetitive current pulse 8/20 us exponentially decaying waveform
.
2
.
Measured from any of pins 1,3,4,5 or 6 to pin2.
SOT563
1 Cathode 1
2 Common Anode
3 Cathode 2
4 Cathode 3
5 Cathode 4
6 Cathode 5
PIN ASSIGNMENT
All Dimensions in millimeter
SOT563
DIM. MIN. MAX.
A
C
D
E
F
B
0.50 0.60
1.70
1.50
1.10 1.30
1.00 (Typ.)
1.50 1.70
0.50 (Typ.)
G 0.17 0.27
F
C
A
E
D
G
B
Marking & Orientation
BF5
1
10
100
1 10 100 1000 10000
0.1
1.0
10.0
0 30 60 90 120 150
0
6
12
18
24
30
012345
Pulse Time (us)
0
40
80
120
0 10 20 30 40
Time (us)
Figure 1. 8/20 us pulse waveform according to IEC 61000-4-5
Percent of Peak Pulse Current
(%)
Figure 2. ESD pulse waveform according to IEC 61000-4-2
Time (ns)
Figure 3. Power Dissipation versus Pulse Time
Ppp / Ppp (25 )
℃
Figure 4. Peak pulse power versus T
J
10%
90%
100%
50% Ipp: 20us
100% Ipp: 8us
Ppp
Ppp (25 )
℃
e
-1
Junction Temperature ( )
℃
T
J
=25 , tp (us) = 8/20 us
℃
exponentially decay waveform
e
-1
30 ns
60 ns
tr = 0.7 ~1 ns
0
0.4
0.8
1.2
0 50 100 150 200
Percent of Peak Pulse Current
%
Peak pulse Power
(W)
RATING AND CHARACTERISTIC CURVES
L02ESD5V0F6-5
Figure 5. Typical Junction Capactiance Figure 6. Reverse Leakage Current versus T
J
Junction Temperature ( )
℃
Capacitance (pF)
Reverse Voltage (V)
IR / IR (25 )
℃
T
J
=25 , f=1MHz, Vosc=100mV
℃
RATING AND CHARACTERISTIC CURVES
L02ESD5V0F6-5
Figure 8. Clamped +8 kV ESD voltage waveform
+/-8KV
ESD Contact
discharge V (i/o)
I/O1
Figure 7. ESD Test Configuration
Figure 9. Clamped -8 kV ESD voltage waveform
V (i/o)
V (i/o)
Legal Disclaimer Notice
L02ESD5V0F6-5
LSC reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm
the latest product information and specifications before final design, purchase or
use.
LSC makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does LSC assume any liability for
application assistance or customer product design. LSC does not warrant or
accept any liability with products which are purchased or used for any
unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property
rights of LSC.
LSC products are not authorized for use as critical components in life support
devices or systems without express written approval of LSC.
Important Notice and Disclaimer